Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Tasks:

● Develop and implement SLAM algorithms for accurate simultaneous localization and

mapping of autonomous robots in outdoor environments..

● Integrate sensor data from various sources (lidar, cameras, IMUs, wheel encoders) to

improve SLAM performance and accuracy.

● Utilize calibration techniques to ensure accurate sensor data fusion for SLAM.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● SLAM algorithms: Proficiency in developing and implementing SLAM

techniques such as EKF-SLAM, Graph SLAM, or FastSLAM.

● Sensor fusion: Experience with integrating data from sensors such as lidar,

cameras, IMUs, and wheel encoders for accurate localization and mapping.

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Programming languages: Proficiency in languages commonly used in

robotics, such as C++, Python, or ROS (Robot Operating System).

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● SLAM implementation: Prior experience in developing SLAM algorithms and

systems for autonomous robots.

● Sensor integration: Knowledge of integrating sensor data from various

sources to improve SLAM performance.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Roles & Responsibilities

* Project management, system testing, technical analysis, optimization of processes and working collaboratively with key stakeholders including technology partners
* Providing engineering design support; addressing technical and safety requirements for battery energy storage systems in accordance with industry standards, project and local regulatory requirements
* Preparing and reviewing technical documentation
* Performing analysis and diagnostics; proposing and implementing corrective actions for performance and reliability exceptions of battery energy storage systems
* Managing the day-to-day operations and maintenance of smart grid and battery energy storage systems to ensure optimal availability for market participation and grid ancillary services.

Requirements:

* Degree in Engineering, preferably in Electrical/Electronic Engineering
* Experienced working with, and deep understanding of Remote Terminal Unit, Power Conversion System, DC-to-DC Converter, illary liquid cooling system, different battery types and Battery Management System
* Keen to explore new technology and adaptable to related challenges
* Passionate about energy management and sustainability
* Good analytical and problem-solving skills
* Able to conceptualize new ideas and communicate effectively, with strong written capabilities

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. ITE in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description:

Role Overview
We are looking for an experienced Generative AI Engineer to join our AI and Data Science team. The ideal candidate will bring deep expertise in AI and NLP, with a strong focus on Generative AI technologies, MLOps, and deploying AI solutions to address complex business challenges. This role demands a strategic thinker with the ability to drive innovation while ensuring ethical AI practices.

Roles and Responsibilities

• AI Solution Development:Design and implement cutting-edge Generative AI models and applications. Develop AI-driven tools, including conversational AI, speech recognition systems, and NLP-based solutions. Conduct research and apply advanced machine learning algorithms for real-world applications.
  
• Project Leadership:Lead cross-functional teams to deliver AI projects, ensuring alignment with business objectives. Manage the end-to-end lifecycle of AI solutions, from ideation to deployment. Collaborate with stakeholders, including clients and academia, to understand requirements and provide tailored solutions.
  
• Innovation and Research:Explore and develop new Generative AI use cases for various industries. Publish research papers and contribute to academic discourse in AI and NLP. Stay updated with the latest advancements in AI and propose relevant applications.
  
• MLOps Implementation:Establish robust MLOps pipelines to streamline model deployment and monitoring. Implement responsible AI frameworks to ensure fairness, transparency, and unbiased decision-making. Optimize AI models for performance, scalability, and reliability.
  
• Knowledge Sharing and Mentorship:Mentor junior team members and foster a collaborative environment.
  Conduct workshops and training sessions to promote AI adoption within the organization.
  

Skills and Experience Required

Technical Skills

• Expertise in Generative AI technologies and tools.
• Proficiency in NLP, MLOps, and LLMOps.
• Strong programming skills in Python and experience with libraries like TensorFlow, PyTorch, and Hugging Face.
• Experience in building conversational AI experiences using tools like Dialogflow.
• Advanced knowledge of machine learning, deep learning, and data engineering.
• Proficiency in cloud platforms, especially Google Cloud, for AI deployments.

Soft Skills

• Strong analytical and problem-solving skills.
• Excellent communication and collaboration abilities.
• Proven ability to lead and work in diverse, cross-functional teams.

Certifications (Preferred)

• Google Cloud Certified Professional Data Engineer.
• Certifications in machine learning, deep learning, and MLOps.

Experience

• Proven experience in Generative AI projects and data science roles.
• Hands-on involvement in research projects and publications in AI/NLP.
• Experience working in both industry and academic environments.

Education

• 
  
• Bachelor’s in Science, Technology, Computer Science or engineering or a related discipline.

Preferred Qualifications

• Publications in top-tier AI and NLP conferences.
• Proven track record in developing AI tools with societal impact.
• Experience in managing large-scale AI projects in a cloud environment.

This role provides a unique opportunity to work at the forefront of AI innovation, shaping impactful solutions that bridge business challenges with technical expertise. If you are passionate about driving the future of AI, we invite you to apply!

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Ø Providing technical input during the project bidding phase including: Specification Reviews, Drawing Reviews, Instrumentation Selection and Procurement / Pricing, Prepare bidding and scope documents in relation to Electrical contractor selection Ø Manage EC&I Subcontractors Ø Mark-up and checking of drawings Ø Liaise between in-house mechanical project engineer and subcontractors Ø Witness Electrical and Instrument panel manufacturing, testing, commissioning work and assist in start-up of systems including: Instrumentation Configuration and Set Up, Troubleshooting of Electrical, Mechanical and Software Issues Ø Preparation of punch list to ensure that the contractor rectifies all items before client final commissioning and client acceptance.

Key Responsibilities

• Fast development of analog IC physical designs, including layout drawing, DRC, LVS

• Layout extractions and analysis for IC designers

• Develop analog and/or digital library cells in various technologies (e.g. CMOS & SOI)

• Layout digital cells for various trade-offs (including speed, power, area, reliability)

• Layout analog circuits and IO circuits

• Characterize digital cell cells for timing and power analyses

• Construct test structures for validating various digital and analog cells

• Layout integration and optimization

• Advise IC designers for best layout practice

• Work with the IC design team to deliver IC physical designs

• Support the team lead for layout design integrations

Minimum Requirements

•Degree in electrical engineering or related field

• Strong experience in analog physical design, particularly bandgap, amplifier, comparator, LDO, current sensing, power switch, etc.

• Proficiency with industry-standard tools such as Cadence, Spectre, HSPICE, and Matlab

• Familiarity with CMOS, BiCMOS, and other process technologies

• Excellent problem-solving skills and ability to work in a fast-paced startup environment

• At least 3-year experience of analog layout design with at 2 IC product tapeouts.

• Some understanding of circuit analysis and implementation

• Strong expertise in power management including DC/DC converter design.

• Able to do design verifications

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with the construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.