Mechanical Contractor - Construction

• Basic: $4000 - $5000
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Work with Process team on in-process audit and FQC Audit.
• Work with Process Engineer & Engineering team on QC requirements
• Contriol of Supplier QUality Assurance (SQA).
• Quality Control of in-coming, in-process and out-going products.
• Prepare and compile report after inspection.
• Plan on construction site visit and liaise with Project Managers or Engineers.

Requirements:

• Min. IT in Manufacturing or Quality Engineering with 1 year of relevant experience.
• Knowledge of IS0 9001, 14001, 13485 & 45001
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Deliver all assigned C&N activities in a cost-effective, safe and efficient manner through contractors with minimum interruption to operating plant and ensure field work sequences are aligned,

Lead contractors in field activities with high safety standards; ensure all field activities comply with authorities, industrial and company HSE standards and requirements.

Organize and chair risk assessments discussions to ensure hazard are identified and mitigated for all C&N assigned activities.

Collaborate with stakeholders, coordinates reviews and schedule optimizations, resource leveling etc. and prompt updates to the C&N Work Plan.

Provide conceptual ideas for field route piping and produce quality sketches, Check accuracy of approved construction drawing and documentation for execution. Carry out mechanical line and equipment checks, able to coordinate Civil and E&I activities progress, Support Construability reviews for Projects.

Conduct site inspection and explain work requirements to contractors; develop work plan with contractors, operations, maintenance, and other stakeholders for execution with minimum interruption to operating plant and ensure field work sequences are aligned. Able to coordinate with multi-disciplines during field execution.

Drive Contractors management to deliver contractors productivity improvements, contractors’ competency & assurance, including developing relevant work procedures and QA/QC. Accept or reject the quality of work & goods provided by contractors/vendors.

Establish time schedule/execution plan for more complex project with multi-disciplinary involvement amongst operations, maintenance, and contractors. Approval of construction related method statements.

Prepare and deliver weekly works & field progress report. Support computation and calculation of progress measurement, monitor work progress and able to provide schedule catch-up plan. Validate field work quotations and value of work done (VOWD)

Executes the Quality Assurance and Control Plan and Project Specifications. Reviews and approves Inspection Test Plan (ITP) according to Shell HSSE, Technical, and Process Safety Standards, and relevant industry code.

Perform as Permit Requestor (PR) and Authorized Engineer (AE), including for lifting works, as per SJI Permit to Work (PTW) requirement

Organize Mechanical Completion review and assist in operation readiness review for project handing over.

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering

Technical Qualifications:

· NACE Coating Inspector Level 2 (Validity Required)

· Qualified MOM OPSOC (Supervisor) or equivalent

· Qualified MOM CSOC (Supervisor) or equivalent

· Qualified MOM Manhole Supervisor

· Qualified MOM Confined Space Safety Assessor

· Qualified MOM Lifting Supervisor and Rigger/Signalman

· Qualified Work at Height Assessor

Professional Experience:

· Minimum 10 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields.

o Piping/Pipeline Construction, inspection and maintenance

o Tank maintenance

o Application of Protective Coatings (Organic Coatings, Thermal Spray Aluminum)

o Installation and maintenance of Insulation systems.

· Experience in Plant Turnaround Project planning, preparation and execution

· Experience with catalyst change out is a bonus.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Design Engineer, you will be working within a fast paced and exciting field with a dedicated inspiring workspace focused on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

In summary:

• Designers will be expected to develop new product concepts and ideas from a blank sheet of paper.
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

We are on the lookout for a dynamic and skilled Design Engineer to join our team. You will be enthusiastic about engineering and product design, bringing a robust technical foundation and a passion for developing innovative solutions. You take pride in your craft your craft and thrive in a fast-paced, collaborative environment. Key skills and attributes you will bring to the role include:

• A degree in a relevant engineering, product design, or science discipline or equivalent.
• At least 1-2 years’ relevant experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate with work of others.
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping and testing.
• Ability to plan & prioritise tasks.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Job Responsibilities:

1. Update CMS database checklists based on the latest engineering drawings and punch lists for mechanical/electrical processes, safety, and HVAC disciplines, and assign tasks accordingly.
2. Prepare boundary drawings to support subsystem listings.
3. Develop procedures, method statements, and risk assessments for commissioning activities.
4. Attend supplier Factory Acceptance Tests (FAT) as required.
5. Lead a team of mechanical/electrical technicians and mechanics to perform on-site preparation and execution, liaising with all parties, including supplier representatives, to resolve issues promptly.
6. Be adaptable to overseas travel and prepare the required documentation.

Candidate Requirements:

1. Relate experience in commissioning within the oil & gas or marine industry required.
2. Hands-on experience in commissioning diesel generators, compressors, pumps, piping systems, packaged equipment, cranes, mechanical handling equipment, HVAC, etc.
3. Familiar with work permit systems, lock-out tag-out (LOTO) procedures, and project specifications, technical, and HSE standards.
4. Experience with completion management system databases such as PIMS-CMS, WinPCS, ProCoSys, or ICAPS is a plus.

Benefits:

1. Annual Leave: 7 days in the first year, increases by 1 day annually, up to 14 days.
2. Medical Leave: 14 days per year.
3. Bonus: Based on performance.
4. Transportation provided (shuttle service available). Accommodation is located in Singapore.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Snr. Backend Engineer

About Us:

Vama is an innovative chat and payment platform committed to revolutionizing communication

and transactions. Our team is passionate about creating seamless, secure, and user-friendly

experiences for our customers.

Role Overview:

We are seeking a skilled Backend Engineer to join our talented team. As a backend engineer at

Vama, you will be vital in designing, developing, and maintaining the backend infrastructure that

powers our cutting-edge chat and payment platform. If you are a tech enthusiast with a strong

background in Go, distributed systems, and cloud infrastructure, we want to hear from you.

Key Responsibilities:

● Collaborate with cross-functional teams to design and implement backend services using

Golang and other relevant technologies.

● Work with databases such as Cassandra, ensuring efficient data storage, retrieval, and

maintenance.

● Implement messaging solutions using NATS.io for reliable communication between

microservices.

● Utilize in-memory caching systems like Redis to optimize data access.

● Implement and maintain infrastructure as code using Docker and Terraform.

● Monitor, troubleshoot, and optimize system performance using Grafana, Loki, and

Prometheus.

● Contribute to the development of scalable and robust cloud-based solutions on GCP.

● Write clear and concise API documentation and design APIs that adhere to best

practices.

● Collaborate with front-end developers to integrate user-facing elements using

server-side logic.

● Write unit and end-to-end tests to ensure the reliability and stability of developed

features.

● Demonstrate expertise in Unix systems and a comfort level with Bash scripting.

Required Experience:

● 10+ years of professional experience as a Backend Engineer.

● 5+ years of professional experience in Golang.

● Solid understanding of databases, tables, indices, and distributed systems.

● Knowledge of parallelism, locking, synchronization, and race conditions in software

development.

● Familiarity with caching mechanisms and cache invalidation strategies.

● Experience in cloud infrastructure, preferably GCP or AWS.

● Proficiency in Unix systems and comfort in the terminal.

● Strong commitment to writing comprehensive tests for all developed features.

● Good understanding of API design principles and best practices.

Helpful Experience:

● Previous experience with Cassandra or other distributed databases.

● Familiarity with Docker, Redis, Terraform, and Grafana.

● Knowledge of Kubernetes (experience optional but beneficial).

* Compensation will be commensurate with experience and qualifications *

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Roles & Responsibilities:

To ensure the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To manage project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience / Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

More than 3 years of site experience in the construction sector, preferably in the superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS Certification

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.
• Follow up with clients and handover the project
• Good knowledge civil, Structure and M&E deoartment

Responsibilities:

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Description:

• Understand read of 3D drawing of equipment, piping system and pipe support
• Familiar with equipment layout drawing, detailed piping drawing and isometric drawing.
• Co-ordinate with process, civil & structural, electrical & instrumentation team, to understand the elevation & structural requirements.
• Develop MSRA for mechanical, piping construction works.
• Manage and supervisor workforce for construction works.
• Prepare the material list depicting all the materials, sizes, specification, special requirements, testing requirements to meet the design. This document shall be used as an input for procurement team.
• Review the documents & drawings of vendor supplied equipment, valves, and skids to verify the piping requirements are meet.
• Perform site inspection at vendor manufacturing unit to qualify & check vendor can supply the bulk requirement on demand.
• Assist project & engineering team for modification requirement during construction. Prepare as-built drawings after completion of construction and documents, as necessary.

Requirements:

• Degree in Mechanical Engineering,
• Minimum 3 year’s relevant experience in piping construction and developing process piping system.
• Good knowledge of GA drawings, ISO drawings,
• Knowledge & experience to work in oil & gas plant, chemical plant,
• Able to provide quick and effective technical solutions, to suit requirements at all stage of the project

RESPONSIBILITIES:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

REQUIREMENTS:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.

RESPONSIBILITIES:

• Post-sales activities of Cybersecurity or Network Performance Monitoring products
• Involve in Large-scale (Local & Regional) Project Implementation
• Provide on-site implementation services including testing, deployment & documentation
• Provide technical support in ensuring customer satisfaction
• Analyse and clarify customer queries though troubleshooting and researching existing
  knowledgebase articles/known issues
• Be on routine standby to support 24x7 maintenance support calls
• Requires the ability to communicate issues clearly and concisely

REQUIREMENTS:

• Bachelor's degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• At least 1-2 years relevant experience in IT industry providing network support and
  administration.
• Equip with knowledge & experience in networking such as routing and switching technology.
• Possess CCNA or CCSA certification.
• Able to work independently as well as in a team environment.
• Willing to work hard and eager to learn about new technologies.
• Polite and able to communicate well to the clients.
• Analytical and possess good troubleshooting skills.
• Willing to work extended hours and on standby duty.
• Excellent interpersonal and communication skills.
• Independent and motivated.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking an experienced and highly motivated Embedded Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing, developing, testing, and maintaining embedded systems for a variety of applications. You will work closely with hardware and software teams to integrate solutions that meet our customer’s needs while ensuring high quality, reliability, and performance.

Job Description

• Design and develop embedded systems and applications based on customer requirements and project specifications.
• Write efficient, optimized code for embedded systems in languages such as C/C++ or assembly.
• Develop, implement, and test embedded software on various platforms (e.g., ARM, or microcontrollers).
• Debug and troubleshoot embedded systems using tools like oscilloscopes, logic analyzers, and in-circuit debuggers.
• Conduct system performance analysis and implement software optimizations to meet power, speed, and resource constraints.
• Create unit tests and integrate automated testing into development processes.
• Document and maintain clear code, designs, and specifications for embedded systems.
• Collaborate with cross-functional teams, including hardware engineers, software developers, and QA engineers, to deliver high-quality embedded products.
• Participate in code reviews, maintain version control using Git, and follow industry best practices for embedded development.
• Stay up to date with emerging embedded technologies and continuously improve the design and development process.

Requirements

• Experience in firmware development on embedded systems using C/C++ and/or assembly
• Knowledge and/or experience in embedded system such as Arm-Linux
• Knowledge and/or experience in porting codes (especially assembly language) from Intel-Linux to Arm-Linux
• Knowledge in information security or networking standards is an added advantage.
• Knowledge in secure boot for NXP i.MX solution is an added advantage.
• Strong problem-solving skills and ability to work independently as well as teams.
• Excellent communication and collaboration skills.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills