Job scope

As a Senior RF application engineer, you will be responsible for developing/testing the evaluation board and product board for RF SoC targeting at UWB and BLE applications. Your responsibilities will include collaborating closely with chip designers to understand the chip function and testing requirement, and optimize the performance of the solution at a system level. Additionally, you will provide direct support to end customers in integrating the chip into their products.

Key responsibilities:

1. Develop and test EVBs for RF SoC targeting at UWB and BLE application

2. Develop and test product board including RF SoC, flash, power supply, filter, antenna, etc.

3. Conduct test and work with certification bodies for FCC, CE, CCC certification

4. Provide support to end customer for chip integration

Key Knowledge Requirements:

1. Familiar with typical power supply circuit e.g. DCDC, LDO, and the design principles of power integrity and isolation

2. Understanding of signal integrity for high-speed digital signals

3. Knowledge of transmission line impedance, matching, filter, EMC/EMI, antenna

4. Familiar with the requirement and testing of FCC, CE, CCC certification

5. Proficiency in PCB design software PADS/Altium Designer/Allegro for schematic design, PCB design, BOM generation

6. Experience with RF testing equipment including spectrum analyser, signal generator, oscilloscope, network analyser

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

Job Description

About the role

Works closely with and have impact on: Manufacturing Engineering, Supplier Quality

Reports to: Senior Molding Engineering Manager

Function: Global Research & Development

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible for the plastic injection tooling and molding project management of new product developments, transferred projects, capacity expansion, as well as continuous improvement for production tooling.

Duties and Responsibilities

> Plan and manage molding engineering budget

> Support all molding engineering related projects

> Lead projects related to quality, yield, process efficiency, and capacity improvement

> Lead end-of-life issues pertaining to product materials and components

> Lead qualifications of 2nd source of materials or equipment for business continuity

In New Product Development Support,

> To be accountable as project leader for tooling development from prototype until mass production stage. Tasks are included but not limited to below aspects:

• Manage the tooling project to ensure project timeline, capital investment and tooling performance target are consistently met
• Review and provide valuable input to Design For Manufacturing (DFM) documents from mold maker, and to assist R&D product designers to optimize product design from tooling scalability and best molding production cost perspective
• Analyze and understand product design, generate mold specification and acceptance criteria, conduct mold design review
• Oversee mold, equipment, process testing and debugging, conduct testing result review and drive mold performance improvement
• Document and transfer tooling knowledge from 1 cav prototype to multi cav mass production tooling
• Molding supplier factory molding validation IQ/OQ/PQ review

> Collaborate with in-house manufacturing and quality team to qualify new tooling. The tooling are for injector parts, IOL optical PP mold, and process aids for material production

> Compile tooling and molding related documentation in accordance to the regulatory requirements, and maintain the quality of molded components

> Initiate the Change Control submission and review, conduct Risk Assessment, draft and get Validation Plan, Validation Protocol/Report reviewed and approved based on the project master plan

In Sustaining Engineering

• Monitor and evaluate production tooling performance at vendor sites and lead the project to develop new tooling for capacity expansion and replacement/renewal
• Trouble shoot IOL and injector defects potentially related with injection molding production which occurs in the vendor’s manufacturing site (Japan, Singapore, Malaysia, etc.), drive solutions with data analysis and fact-based approach
• Be involved in sourcing of alternative vendor of plastic tooling and molding production for long term business sustainability

Requirements

Experience

• At least 3 years of technical experience in medical device/pharmaceutical industry
• Understand IQ/OQ/PQ validation requirement in accordance with IS013485 standard
• Able to write, review and coach validation protocol and report
• Track record of successful tooling and molding project management, tool makers and molding suppliers handling experience in the region
• At least 3 years of hands on experience in tooling design and Design For Manufacturing (DFM) for product and tooling design
• Solid molding process knowledge is required, and with at least 3 years of Scientific Molding practitioner

Skills/Accreditations

• Preferably Lean 6 sigma green belt trained, understand DMAIC approach, Failure Mode Effect Analysis (FMEA), Gauge R&R and Design of Experiment for trouble shooting and process improvement
• Strong technical writing skills
• Quick learner with logical thinking, good communication skills in English, customer focused, ability to drive results
• Able to read and speak Japanese is a plus

Academic Qualifications

• Bachelor‘s degree in mechanical or chemical engineering field related to plastic injection molding, or diploma in Engineering with more than 3 years experience in project management of customized mold design

Travel requirements

• 10 – 25%

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Job Description:

• Administer project planning and project execution;
• Ensure all project activities are peformed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner;
• Coordinate the mobilisation/demobilisation of construction equipment to suit construction schedules;
• Assist with cost control and estimating activities;
• Check and verify subcontractor claims and variations;
• Maintain close liaison and communication with field operations team;
• Ensure all company reports and documentation are completed accurately and on time;
• Perform any other related duties as and when assigned by Manager.

Job Requirements:

• Diploma/Degree in Mechanical Engineer or related Engineering field;
• Min. 3 years of related field experience;
• Knowledge of Autocard will be advantageous;
• Dynamic and good team player;
• Able to travel overseas as and when required.

Responsibilities:

1、Responsible for the research and development of wireless communication system, positioning system, radar system, motor control system, baseband algorithm, positioning algorithm, bioradar algorithm, and motor control algorithm.

2、Complete design documents, support hardware development, participate in testing, analyze and solve various problems encountered in actual development.

Requirements:

1. Majors in signal processing, microelectronics, communication, computer, control, automation, applied mathematics, etc.

2. Master's degree or above.

3. Exposure to IC design is a plus.

4. Good English skills, communication skills, and willingness to work with a global team;

5. Good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment.

6. Fresh MS graduates are welcome.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Position Summary:

The Senior AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.

Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Qualifications:

• Minimally a diploma in relevant Engineering field with equivalent work experience, with a focus on mechatronics preferred
• Familiarity with Unix (Ubuntu) environment
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Dedication to meticulous documentation and reporting practices.
• A Class 3/4 driving license will be an added advantage.

Experience:

• 3-5 years of hands-on experience in service engineering, technical support and/or operations coordination. Prior experience related to Class 3 and 4 vehicles will be an advantage.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

(1) Overview and purpose of the position*

1) Responsible in overseeing the performance of outsourced maintenance service providers in mechanical services and systems for the hospital and ensure functionality as well as serviceable at all times.

2)To audit and monitor service standards rendered by specialist vendor and outsourced maintenance service provider.

3)To provide support to Head of Department and Building Managers in capital nature replacements, systems and building improvement projects.

4)To coordinate and support hospital’s A&A and minor works.

(2) Accountabilities*

(2) Related Performance Indicators

1) Strong culture of staff and leadership accountability

• Work closely with FM Institution Lead and Mechanical Lead, in building clear scope, expectations and deliverables for the Mechanical team as well as planning for specialty training and develop the capabilities of Mechanical Team members.
• As a Subject matter expert to assist the Mechanical Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.

2) Contract management, evaluation, negotiation, and execution

• Manage Mechanical systems contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licencing.
• Ensure processes are in accordance and compliance with Audit Compliance, NUHS Contract Management, Procurement and Finance Policies and Process.

3) Manage Managing Agent, vendors and liaison with authorities as well as communication to stakeholders

• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with Admin on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Monitor vendors’ performance, deliverables and Key Performance Indicators (KPIs) are as per contract awarded.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical systems breakdown and recommend improvement plan as needed.
• Filing and documentation recording of all authorities’ correspondences.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical Team as the liaison party on authority matters.

4) Developing and implementing procedures, policies and checklists

• Review and update Standard Operating Procedures (SOP) and working instructions on a regular basis.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.

5) Asset Management

• Plan and oversee Mechanical system upgrades/improvements or replacements before their expiration or its end of life.

6) Projects

• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award (ATA) papers for Preventive Maintenance Contracts and projects.

7) Knowledge management

• Maintain good documentation (e.g records of all contracts, reports, agreements, check lists) with FM Admin team to ensure full compliance.

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Minimum three (3) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders)
• Experience in Fire Safety/ Alarm System, Medical Gas/ Vacuum System, Lift and Escalator System, Pneumatic Tube System, Mechanical Automation system is advantageous.
• Health care experience is advantageous.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Responsibilities:

1. Engage in firmware/software development for communication systems, positioning systems, bioradar systems, and related products.

2. Engage in V-model development, which includes requirement analysis, high-level design, low-level design, implementation, unit testing, integration testing, and system testing.

Requirements (Firmware):

1. Bachelor’s degree or above, majoring in computer engineering, electronic engineering, communication, automation, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management and low-level driver development. Capabilities to build the toolchain with Python would be advantageous.

3. Experience with embedded operating systems such as RTOS would be appreciated. Knowledge of pre-emption, IRQ, and embedded communication protocols such as I2C, UART, and SPI is mandatory.

4. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

5. Preferred experience includes ARM Cortex-M series hosted microcontrollers. Candidates with solid experience in ESP32, Raspberry Pi, Arduino, STM32, or similar platforms will have an advantage.

6. Competency in using debugging equipment such as oscilloscopes, logic analysers, and FW debuggers is mandatory.

Requirements (Software):

1. Bachelor’s degree or above, majoring in computing, software engineering, computer science, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management (static, stack, heap) and GUI. Candidates with hands-on experience in creating Windows based application with IMGUI will have an advantage. Capabilities to build the toolchain with Python would be mandatory.

3. Candidates with experience in building applications that facilitate TCP/IP, UDP, etc., will have an added advantage. Knowledge and proficiency in data structures management are essential, including sorting algorithms, linked lists, stacks, queues, trees, and hash tables.

4. Knowledge or hands-on experience with multithreading concepts such as IPC, MUTEX, Time Slicing, and Pre-emption will provide a significant advantage.

5. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

6. Experience with software pipeline automation tools such as Jenkins is appreciated.

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

Responsibilities:

• Provide 2nd level onsite troubleshooting support in response to escalation from helpdesk to ensure consistently meet customer response / resolution times and objectives based on SLA
• Coordinate with equipment vendors and 3rd part suppliers to resolve issues
• Attend to customer enquiries (through phone and email) and follow-up on outstanding issues closely while ensuring that customers are kept updated on the progress
• Maintain call log database system and ensure all unresolved problems are escalated to the senior engineers
• Participate in adhoc projects when required

Requirements:

• Possess NITEC certification or Diploma in IT or relevant discipline
• Experience in desktop support and good working knowledge in Windows OS, Basic Network experience
• Minimum 2 to 3 years experience in customer support environment will be an added advantage
• Able to work under pressure and independently in a team environment
• Must be able to work in a fast-paced and dynamic environment
• Willing to travel around Singapore to multiple sites
• Able to work on rotating shifts

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

Job Description:

• 5+ years of experience in software testing.
• Strong experience in web services testing using SoapUI or Postman.
• Experience in web application testing is required.
• Familiarity with automation testing using Selenium, Cucumber, or QTP is a plus.
• Hands-on experience in testing activities, with a willingness to write and execute test cases on a daily basis.
• Proficiency in at least one test management tool and one defect management tool is required.
• Experience in sanity testing, regression testing, and system integration testing (SIT).
• Knowledge of the Software Testing Life Cycle (STLC) and testing processes is essential.
• Good attitude and strong communication skills are required.
• Willingness to learn and adapt during the ramp-up period; must be able to become hands-on quickly.
• Exposure to Selenium automation development is preferred.

Education:

Bachelor’s in computer science, Computer Engineering or equivalent/higher

Language:

Fluent written and spoken English

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensure that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements.

WHO YOU’LL WORK WITH

At NIKE, our purpose guides our culture and strategy. In Responsible Supply Chain we bring our purpose to life through strategy & targets, focused on product, planet and people. Our targets are ambitious, but achievable through clear goals, measures and accountability. We are transforming our supply chain with world-class and innovative programs that ensure our products are made responsibly and sustainably. Our progress depends on teamwork and end-to-end execution.

As Director, Responsible Supply Chain (RSC) in Singapore you will be part of the Global Responsible Supply Chain Leadership Team, reporting into the Senior Director, RSC, based in Nike’s World Headquarters in Beaverton Oregon. You will lead a team of sustainability subject matter experts, based in Singapore, driving performance against sustainability strategy and targets. Working closely with cross functional teams within global sustainability and supply chain.

WHO WE ARE LOOKING FOR

We’re looking for a Responsible Supply Chain Director in our Singapore office, to join the global Responsible Supply Chain leadership team. We operate one of the largest supply chains in the world and work with partners that make and move Nike products across the globe. Their leadership in sustainability is essential to ensure we meet our targets. To be successful in this role, we need someone with deep expertise in operationalizing strategies in global supply chains, preferably with experience in manufacturing, transportation and distribution.

The successful candidate will be able to think strategically, but also translate strategies into action with clear and aligned plans. They will be able to communicate our vision and motivate others into action, and able to drive organizational change. They will also be a trusted leader who fosters teamwork and develops others.

What they will bring:

• Bachelor’s degree or Master’s degree in sustainability or business related field preferred.
• 10+ years professional experience in Sustainability and Business leadership.
• Strong stakeholder and partner management skills.
• Excellent written and verbal communication skills.
• Ability to understand and use data to make the business case for RSC initiatives.
• Ability to network, influence and utilize internal and external resources.
• Project Management skills and a strong attention to detail.
• Ability to travel 10-20% of time.

WHAT YOU’LL WORK ON

The successful candidate will consult on Nike’s Enterprise Sustainability Strategy, Standards and targets, leading the implementation and execution of Nike’s Responsible Supply Chain (RSC) Strategy with Supply Chain Partners. Key responsibilities include:

• Delivering Nike’s Foundational Excellence program with Supply Chain Partners, driving performance against Code and Standards.
• Building Partner capabilities through Summits, Workshops and supporting Learning Communities.
• Driving continuous improvement and consistency in strategy creation, alignment, implementation and execution processes.
• Developing annual plans for Supply Chain Partner’s group level target implementation.
• Driving performance against Nike’s enterprise sustainability targets with Supply Chain Partners.
• Driving discipline in data management, analytics & reporting.
• Providing expert level tech expertise.

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Overview:

Join Antina’s dynamic team as a Cybersecurity Project Engineer, where the successfully hired candidate will lead cutting-edge cybersecurity projects and ensure robust security operations. This role offers the perfect blend of technical expertise and project management, providing an exciting opportunity to make a significant impact in the cybersecurity landscape.

The 5G Exploratory Platform (5GEP) will serve as the dedicated testbed for 5G infrastructure. This platform will enable the discovery of vulnerabilities, the testing of network equipment, and to enhance the security and resilience of the 5G ecosystem.

Key Responsibilities:

1. Project Management:

• Lead cybersecurity projects from start to finish, ensuring timely and budget-friendly delivery.
• Develop project plans covering scope, schedule, resources, and risk management.
• Collaborate with vendors and internal teams for seamless project execution.
• Provide regular updates to stakeholders and document all project activities.
• Participate in requirement gathering, testing, training, and implementation phases.
• Meet project SLAs and manage potential risks.

2. Operations:

• Update network configurations, software versions, and procedures.
• Ensure security systems are tested and maintained.
• Assist in obtaining technical support from vendors and track system warranties.
• Implement and manage security measures like firewalls, IAM, SIEM, and SOAR systems.
• Respond to security incidents and provide detailed reports.
• Manage system and user functions, including access rights and maintenance.

Qualifications and Required Skills:

• Bachelor’s degree in Computer Science, IT, Cybersecurity, or related field.
• At least 2 years of project management experience.
• Proven experience in cybersecurity operations and project management.
• Strong knowledge of cybersecurity principles and technologies.
• Proficiency in IT, Networking, VMWare, and security tools.
• Excellent problem-solving and communication skills.
• Relevant certifications (CISSP, CISM, PMP, PCNSA/PCNSE) are a plus.
• Security clearance required.

An ideal candidate would possess the following abilities:

• Project Management: Lead and manage project timelines, coordinate with stakeholders, and implement security solutions.
• Network Infrastructure Management: Understand networking protocols, configure and troubleshoot firewalls, switches, routers, and load balancers.
• System Administration: Manage Windows and Linux operating systems, apply hardening techniques, and respond to breaches.
• SIEM: Customize dashboards, alerts, and reports; tune SIEM rules.
• Firewall Operations: Set up firewall rules and configurations, understand firewall logging and traffic monitoring.
• IAM: Knowledge of IAM principles and tools, implement multifactor authentication and single sign-on.
• Vulnerability Management: Use tools like Nessus or Qualys for vulnerability scanning, understand MITRE ATT&CK framework.

How to apply:

Visit our company website at www.antina.com.sg for more information or send your CV directly to [email protected].

Antina is a company driven by ability, performance, and hard work. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Position Summary:

This is for the Central Patch Management Service under the Systems Technologies which focuses on using BigFix for patch deployment, compliance, and reporting.

Roles And Responsibilities:

• Oversees the entire operation and understands how to use the tools & reports.
• In charge of the BigFix infrastructure, including servers, relays, SQL and updating of the software infrastructure.
• Control access to BigFix components.
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks related to patch management.
• Develops custom reports for stakeholders.
• Setting up content for distribution to endpoints.
• Creates baselines, writes custom fixlets and analysis.
• Develop and maintain groups inside of BigFix.

Requirements / Qualifications:

• Minimum Bachelor's Degree or Professional Degree in Computer Science / Information Technology or equivalent.
• Proficient in BigFix architecture or SCCM
• Minimum 5 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating complex incidents and deep underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities.

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

This is a for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.