Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

• Reports to Utility Manager
• Coordination between sub-contractors and construction team on excavation works, services diversion, and reinstatement works.
• Provide update of the progress of works in the construction site.
• Supervise subcontractors’ works as per work plan, timeframe, and as per required quality standard of work output.
• Monitor utilities and M&E work executed are in accordance to statutory requirements, construction procedures, and safe work practices.
• Assist other Engineers in preparing the programming of works, scheduling, and monitoring the progress plan.
• Any related works as assigned by superior

Job requirements:

• Bachelor’s Degree in Civil Engineering or equivalent
• Minimum of 2 years’ relevant experiences as Utility Engineer
• Candidate with relevant LTA infrastructure project experience is an advantage
• Knowledgeable with various Utilities, M&E works
• Self-motivated, independent individual and possesses great initiative
• Good interpersonal skills
• Proficiency in using Microsoft Office and Auto CAD is an advantage
• Location: Woodlands
• Project: Viaducts

JD FOR SALES ENGINEER

We are seeking a dynamic and motivated Sales Engineer to join our team.

Job Description

Technical Sales Support: Present product features and benefits, offer technical assistance, and address customer queries. Understand client needs, able to recommend appropriate products. Relationship Management: Cultivate long-term client relationships, provide ongoing support, and collect feedback to improve products. Market Knowledge: Stay up-to-date on industry trends and competitor activities, while training the sales team on technical product details. Sales Growth: Help achieve sales targets, identify opportunities for upselling, and represent the company at events and trade shows. Documentation: Maintain accurate client records and provide reports on sales performance and market trends.

Benefits:
• AWS
• Bonus
• Transport Allowance
• Entitled to commission

Responsibilities:
• To meet assigned Sales Targets
• To manage existing customer accounts and seek new leads
• Establish a good business relationship with customers long term

Requirements:
• Possess own car
• Candidate must possess at least a Diploma & Above
• Good communication skills, team player & target oriented.
• Familiar with MS Excel and MS Word.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Why This Role
As the ideal candidate, you will leverage your analytical and problem-solving skills and play a vital role to fuel our growth. Your role will span across existing and new Fabs, improving processes and thereby wafer yields, increasing manufacturing productivity that are key to achieving Fab excellence. Coaching Associate Engineers (AEs) will also be part of your job responsibilities.

What You Will Do

• Maintain and support equipment readiness in capacity of either an individual contributor (as directed and/or independently), or as a manager.
• Perform preventive maintenance (PM) and troubleshooting of equipment
• Execute maintenance and tool support ensuring equipment readiness
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed

What You Will Need

• Bachelor’s Degree in engineering or equivalent
• At least 2 years of relevant experience in equipment engineering, preferably in a wafer fab / Electronics / Electrical industry
• Proven ability to identify, assess and solve problems
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

Job Responsibilities:

• Establish, implement and maintain effective Quality Management System (QMS) in compliance with the requirements established by the Company and relevant industry standards (e.g. API Q1 requirements).
• Establish and lead internal audit program covering all operations and functions to ensure adherence to QMS requirements, provide report on internal audit results, and follow-up audit results to ensure close out of corrective/ preventive actions.
• Lead and drive continuous improvement efforts in QMS.
• Lead root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely response to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Manage and supervise the daily operations of Quality Control.
• Supervision and management of QC resources – Inspectors, Quality Coordinator.
• Provide technical expertise and training to Inspectors and Quality Coordinator.
• Ensure proper control and maintenance of quality documents and records.
• Prepare Quality performance metrics and reports on a weekly and monthly basis.

Job Requirements:

• At least a Professional Certificate/NiTec, Bachelor Degree, Post Graduate Diploma, Professional Degree in Mechanical Engineering, Quality, or related.
• Good knowledge of ISO /API Q1 is preferred.
• Strong hands-on experience on quality inspection & measurement is preferred.
• Knowledge/certificate in NDT is preferred.
• Possess good interpersonal and planning skills.
• Minimum 2 years work experience in Quality Management System of manufacturing environment.
• Prefer having experiences in non-electronic industries such as raw material suppliers, metal cutting, oil & gas, mechanical , surface treatment/coating etc.

- Responsible for achieving sales targets and providing technical support to our customers

- Diploma or ITC / NTC2 in Mechanical / Electrical or Marine Engineering

- Entry-Level graduates may apply

- Sales and product training will be provided

- Excellent interpersonal, communication & negotiation skills

- Must possess Class 3 licence and own a car

1. JOB SUMMARY

The SAAC Engineer handles security operations, oversees officers, ensures systems, and supports compliance under EHSS leadership.

1. KEY RESPONSIBILITIES

Security Operations:

- Develop and implement security protocols to ensure the safety of personnel, assets, and property.
- Oversee and coordinate the deployment and performance of security officers provided by external security agencies.
- Monitor and address security incidents, ensuring timely and effective resolution.
- Conduct risk assessments, threat & vulnerability assessments, gap analysis, and site audits to evaluate and improve security measures.
- Draft, implement, and enforce Standard Operating Procedures (SOPs) for security operations.

Security Infrastructure and Systems:

- Design, install, and maintain physical security systems, including CCTV, access control, and alarm systems.
- Identify and rectify deficiencies in existing security infrastructure to maintain functionality and compliance.
- Plan and execute upgrades or modifications to security systems and infrastructure.
- Evaluate advancements in physical security technology and recommend improvements.

Documentation and Compliance:

- Prepare and maintain all security-related documentation, such as incident reports, risk assessments, and compliance records.
- Ensure that all security operations and infrastructure comply with local laws, regulations, and corporate policies.
- Provide detailed reports and updates to the Head of EHSS regarding security operations and incidents.
- Maintain accurate records of inspections, maintenance activities, and system updates.

RBA and SAAC Responsibilities:

- Ensure compliance with anti-corruption policies and RBA Code of Conduct requirements within security operations and the broader supply chain.
- Manage documentation and preparation for RBA audits, including supplier contracts, training records, incident reports, and corrective action plans.
- Conduct risk assessments and implement corrective actions to address non-compliance findings.
- Support anti-corruption training and awareness programs for internal teams, suppliers, and vendors.
- Monitor and report progress on RBA-related compliance activities to the Head of EHSS.

Stakeholder Coordination:

- Work closely with internal stakeholders to address security concerns and implement solutions.
- Liaise with external security agencies, suppliers, and vendors to ensure their compliance with security and anti-corruption requirements.
- Serve as the point of contact for regulatory authorities and auditors during compliance inspections and RBA audits.

1. MINIMUM ACADEMIC REQUIREMENT

- Bachelor’s degree or Diploma in Security Management, Engineering, EHS, or a related field (or equivalent experience).

- Minimally graded as SS by PLRD
- Significant experience in physical security operations, infrastructure management, and stakeholder coordination.
- Expertise in physical security systems, such as CCTV, access control, and intrusion detection systems.
- A background in Environmental, Health, and Safety (EHS) is strongly preferred.
- Proficiency in preparing and managing security documentation, including compliance reports.
- Familiarity with RBA standards, corporate security, and anti-corruption practices.
- Certifications in relevant security or EHS fields (e.g., CPP, PSP, NEBOSH, WSQ Advanced Certificate in WSH) are an advantage.

- Fresh graduates are encouraged to apply

• Advanced CAD Skills – Proficiency in using advanced computer-aided design (CAD) software to create detailed 3D models and engineering drawings.
• Mechanical Engineering Knowledge – Strong understanding of mechanics, materials science, thermodynamics, and manufacturing processes.
• Problem-Solving – Ability to identify issues in design and find innovative solutions, considering both technical and cost constraints.
• Design for Manufacturability – Knowledge of how to design products that can be easily and cost-effectively manufactured.
• Project Management – Ability to lead and manage projects, including timelines, resources, and cross-functional collaboration.
• Finite Element Analysis – Experience with FEA tools to predict the behavior of mechanical components under various conditions.
• Communication Skills – Ability to clearly communicate technical ideas and collaborate with other teams, including engineers and manufacturers.
• Attention to Detail – A keen eye for detail to ensure designs are accurate and meet all specifications and safety standards.

Requirements:

· Diploma / Degree in Engineering Or ITE with Vast Experience

· Minimum 8 years working experience in related field and 3 years working experience in a Managerial Position

· Strong persuasion and negotiation skill with a variety of people at all levels

· Ability to manage foreign workers

· Possess good leadership qualities

· Excellent communication and problem solving skills

· Able to handle unexpected challenges

· Strong project management skill. Ability to manage multiple projects, plan against timeline and meet deadline, and forecast, budget and monitor project costs

· Previous working experience in ship building Projects will be an advantage.

. Shipyard, shipbuilding/shiprepair experience is a MUST for this position

. Team player with leadership qualities

. Able to plan, coordinate and monitor ship building and repair actiivites

. Able to work under pressure and tight schedules

. Professionally sound and to be able to trouble shoot mechanical / hydraulic defects at Riding crew at Sea / Anchorage.

. Able to work Extended working hours and week ends too

. MOM relevant certificates required

Responsibilities

• Responsible for the planning, leading and supervision of production team to ensure that works are carried out in a safe, timely and cost-effective manner
• Discussion, advising and coordination of works with all relevant parties
• Preparation of reports as required
• Observe and maintain safety rules and regulations

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

To ensure work is construct in accordance with contract and drawings.

Planning of Architectural Works and micro scheduling with other disciplines.

Liaise with main-contractors, suppliers, etc. Procurement and Monitoring of Architectural related materials.

*Coordinate, review and verify drawings including owner & maincontractor’s drawings to ensure compliance with design specifications and guidelines.

*Able to work in a fast-paced environment and both independently and in a team.

Requirements

*Experienced in AutoCAD 3D, and able to understand architectural or structural drawings

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Duties and Responsibilities

· Develop existing Ship Supply businesses.

· Develop and enhance customer relationships

· Identify and secure new business opportunities

· Suggest and implement strategies to promote sales, grow business with existing customers

· Develop a frontline relationship with customers

· Communicate trends/pricing issues and other unique issues as it relates to sales

· Work closely with Operations and management with regard to sales needs

· Analyse market information and sales information to keep abreast of the latest development.

· Handle running order quotations.

· Handle cruise and tender quotations.

· Assisting the Accounts team to highlight those customers who are late payments or chasing payment.

· Handle customer complaint

· Provide personalized service to customers (e.g. delivery)

· Other responsibilities as and when required.

. Possess Driving Licence Preferably

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Responsible for management of various PLC programs and SCADAs, EMS, BMS, Various Software, Hardware, VFDs at site, Program backup and recovery as & when required. Change management etc.

· Planning & execution of all new and retrofit manufacturing equipment, packaging line related projects for the site.

· Ensuring the best available technologies are incorporated by design.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Delivering the project within the budget and timeline approved.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirements to ensure efficient, reliable, and uninterrupted operation.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure the site manufacturing equipment are kept to the highest standards for cGMP requirements, including Sterlie filling, Granulation, Compression, Packaging etc.

· Responsible for development SOPs and quality standard for site with following of site QMS procedures.

· Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep site audit ready for all the time.

· Responsible for managing a team of vendors / contractors.

· To assist on any ah-hoc duties that have been assigned / task by the immediate supervisor.

Education:

· Bachelor or Master Degree in Electrical/ Instrumentation / Automation / Mechatronics engineering or a related field.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in PLC program (ladders, function block, OPC code…etc)

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.