Qualifications

•     Must be able to navigate through system database software to configure and troubleshoot data and hardware related issues.

•     Experience and understanding of Enterprise System architecture is a plus.

•     Ability to delegate and organize responsibilities with projects involving multiple personnel is essential which include but not limited to

•     Scheduling and holding regular meetings with customers and team members to discuss system health and open tickets.

•     Experience with system upgrade process and practices as well as methodical and careful planning is essential.

•     Certifications in Lenel Onguard, Software House CCure, Avigilon ACC/ACM, S2 Access Control Systems and Video Management Systems are plus.

Duties

•     Responsible for meeting with clients to determine their system needs.

•     Ability to work with design team to engineer complete system(s).

•     Monitor and maintain system health which includes Database and application Servers.

•     Test, program and troubleshoot access control and digital video systems.

•     Follow assigned projects through to final adjustment and commissioning of installed systems.

•     Create test plans and test systems.

•     Install complete turnkey system (software and hardware).

•     Customize system to tailor to customers’ business model.

•     Work off hours to support customers and technicians globally.

•     Troubleshoot system/network related issues over the phone with customers and vendors.

•     Ability to train customers and technicians on respective systems.

•     Be available for 24 hour phone support.

•     Document and maintain system architecture and parameters specific to customer.

•     To work in compliance with the Company’s Health and Safety standards and requirements; with the safety of       self and others in mind at all time.

The Site Engineer (Building) is responsible for assisting the Site Agent on the progress of site works and manpower related aspects of the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Technical expertise and knowledge in Foundation, Structural and Building works
• Proficient in Microsoft Project
• Good knowledge on method statements

Job Description:

• Data Analysis and Interpretation: Perform in-depth analysis of structured and unstructured data sets to identify trends, patterns, and valuable insights that drive business decisions and strategies.
• Data Visualization and Reporting: Develop intuitive and visually appealing dashboards, reports, and presentations to communicate complex data analyses to stakeholders, enabling data-driven decisionmaking at all levels of the organization.
• Data Modelling and Transformation: Design, implement, and maintain data models, ETL pipelines, and data integration processes, ensuring data accuracy, integrity, and accessibility.
• Data Quality Assurance: Implement rigorous data validation and cleansing procedures to ensure the accuracy and reliability of the data used for analysis and reporting.
• Identify Data Needs: Collaborate with stakeholders across various departments to understand their data requirements and deliver insights that align with their business objectives.
• Continuous Improvement: Stay abreast of industry trends and best practices in data analysis and engineering. Suggest and implement process improvements to enhance data quality, efficiency, and overall performance.
• Data Security & Compliance: Implement, maintain, and monitor data security and privacy measures on data platform.
• Cross-functional Supports: Collaborate with other teams to ensure the successful execution of projects and initiatives.
• Operational supports: Maintain and support day to day operational on data platform, including:
• Monitoring data pipelines, databases, and analytical processes to ensure smooth and continuous operation.
• Identify and resolve data-related issues, performance bottleneck, and data quality problems promptly.

Job Requirements:

• Bachelor’s degree in Computer Science, Data Science, Statistics, or a related field.
• At least 5 years’ working experience in data platform, data analytics or relevant projects.
• Proven experience as a Data Analyst, with a track record of translating complex data sets into actionable insights.
• Strong proficiency in data visualization tools (e.g., Tableau, Power BI, or similar) to create compelling data visualizations and reports.
• Solid programming skills in languages such as Python, SQL, SAS, or R for data analysis and data engineering tasks.
• Prior experience as a Data Engineer, with a demonstrated ability to design and implement data models, ETL processes, and data integration solutions.
• Familiarity with cloud-based data platforms (e.g., Azure Data Factory, Azure Purview, Databricks, Snowflake, Kafka, or equivalent) and data storage technologies (e.g., SQL databases, NoSQL databases).
• Having prior experience with Microsoft SQL Server, Microsoft SSIS, or Ali Cloud (Dataphin) is a plus.
• Excellent problem-solving skills and the ability to work with large, complex data sets.
• Strong attention to detail, ensuring data accuracy and reliability in all analyses.
• Effective communication skills to convey complex technical concepts to non-technical stakeholders.
• Proven ability to work independently as well as collaboratively in a fast-paced, team-oriented environment.
• Certified in Tableau Data Analyst, Microsoft Power BI Data Analyst, SnowPro (Snowflake), Databricks or equivalent.

Please send your detailed resume in MS Word format to : [email protected]

Stating your notice period / earliest available commencement date, Current & expected salaries.

Job description

• Good knowledge of network technologies and products, including Cisco routers and switches, Nexus, Checkpoint, Cisco Firepower, ASA, and Fortinet Firewalls; IPSec VPN, and Remote VPN.
• Solid understanding of the OSI and TCP/IP models.
• Hands-on experience in network security devices in Data centre environment.
• Advanced troubleshooting skills, along with strong customer management and communication abilities.
• Good understanding about private, public and hybrid cloud environment.
• Comprehensive knowledge of network infrastructure and applications, including Active Directory(AD), ADFS, and Azure AD.
• Good understanding of AWS, OCI and Azure cloud-based solutions.
• Good to have experience in Aruba or Cisco wireless technologies.
• Good to have experience with load balancers, such as F5 and Forti ADC.
• Experience with cloud proxies, such as MWG and Netskope, and Bluecoat proxy or reverse proxy solutions.
• Knowledge of Secure Access Service Edge (SASE) or Zero Trust Network Access (ZTNA) is a plus.
• Relevant industry certifications such as CCNP or higher, AWS or Azure certifications are required.

Technical certifications: CCNP, CCIE, CheckPoint

Good to have

• Knowledge on VMware vSphere and NSX is a big plus point
• Experience in load balancers, reverse proxy, VPN setup, DNS
• exposure to TACACS+, Radius, and Cisco Access Control System
• Perform maintenance and upgrades of systems and networks

Vacancy in O&G/ Marine offshore industry

Position: NDT Engineer

Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. It has executed a wide range of major projects involving Marine FPSO Conversion/Process Module Construction related to Oil and Gas Industry, Sub-Sea Products, Semi-Submersibles, Repair of Oil Rigs, Pharmaceutical Process Packages and Power Generation Facilities since its foundation in 1990. This vast experience and Total Commitment to Customer Satisfaction has since earned it a strong reputation in the industry as a reliable local business partner that aspire to exceed our clients’ expectations.

It is looking for an NDT Engineer.

Job Highlights

Listed Company with Good Benefits

Good Stable Career Advancement Opportunities

Conductive and Friendly Working Environment

Career Growth Opportunity |Trainings for Career Growth

Job Description

Roles

In the oil and gas industry, NDT professionals play a crucial role in inspecting pipelines, storage tanks, and offshore platforms for defects or corrosion. By using advanced techniques like ultrasonic testing and radiography, they can identify potential weaknesses and prevent costly leaks or accidents, ensuring the integrity of the infrastructure.

We are looking for a talented NDT Engineer who has past records in minimizing the operation’s costs, whose skill in NDT testing can help the company reducing the costs of labor, materials, downtime and undetected repairs, also indirectly limiting costs associated with spills, such as reputational damage and fines.

Responsibilities

· Familiarization of ASME / API Codes & Standards, DNV Rules

· Proven experience of providing solutions on NDT inspection related problems

· Responsible for company NDT management and controls

· Responsible for trouble shot problems related to NDT

· Provide internal training technical guidance to QC Inspectors

· Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval

· Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review

· Risk assessment of NDT works and lead the risk assessment process of NDT in the yard

· Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements

· Co-ordinate with NDT contractors to develop and update their individual competency matrix

· Maintain all NDT personnel qualification records and update from time to time.

· Keep a copy of all NDT contractors’ certificates

· Review NDT operator qualification and submit for project approval

· Establish calibration and validation blocks required to demonstrate Ultrasonic Testing

· Perform Audit on NDT contractors to ensure compliance with project requirements

· Witness & provide technical guidance on standard PAUT validations

· Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities

· Reviewing and commenting on standards, specifications, and enquiries

· Work as part of a team to ensure all regulatory, quality and customer requirements are met

· Verify NDT reports for project requirements compliance

· Creative problem solving - able to suggest and develop new methods and ways of working

· Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc

· Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions

· Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Requirements

· Bachelor’s degree in Mechanical Engineering

· Minimum 5 years’ experience in fabrication environment as NDT Level III

· ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)

· Reports to Principal Welding and NDT Engineer

· Strong analytical and problem-solving skills

· Expected skill in method of NDT for oil and gas is radiographic testing, and Computed radiography (CR) and direct radiography (DR)

· Good written and verbal communication skills

· Proficient in Microsoft Excel is a must.

· Possess good initiatives

· Organised, positive attitude and detail oriented.

· Team Player, resourceful with sense of responsibility.

Job Related Information

Permanent – 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm

Head-Office Location: Office Location: Gul Circle, Singapore.

Salary & Benefits

• Monthly Basic Salary: Based on expertise, academic qualification and skills
• OT pay entitlement: OT Flat rate S$8/- per hour
• Healthcare benefits such as Outpatient, Dental, Health Screening etc.
• Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
• Variable Bonuses
• 14 days Annual Leave and 14 days sick leave
• Birthday leave / Festival eve half day leave
• NTUC membership – Applicable for only Permanent confirmed staff
• Company transport provided at 5 pickup points:

Ø Bukit Batok MRT

Ø Jurong East MRT

Ø Boon Lay MRT

Ø Choa Chu Kang MRT (only Morning pickup)

Ø Woodland MRT (only Morning pickup)

NB:

• NO QUOTA FOR THE FOREIGNERS PLEASE.
• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.

Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role at [email protected]and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte Ltd

(EA License 21C0547)

Singapore 068906

Website: http://www.venture-cove.com/

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)
• Reports to Principal Welding and NDT Engineer

Managing and overseeing the fabrication operation

1. Ensure on time project delivery

2. Ensure all the design drawing is accurate

3. Work closely with Engineering and QAQC to meet quality.

4. Work closely with procurement dept. for on time delivery of material for fabrication

5. Ensure correct order of fabrication materials

6. Work closely with the supply chain management for the machineries and tools usage

7. Plan efficiently for the manpower usage

8. Minimize material wastage

Prepare risk management plan

1. Plan in advance for any emergency issue

2. Ensure on time delivery to customers/operation

3. Check and ensure the design drawing is accurate before fabrication to avoid re -work

4. Ensure sufficient manpower & material are available at all times

Administer Workplace Safety and health (WSH) and Environmental Management Systems (EMS)

1. Ensure workers/sub-contractor wear full PPE items and comply with the company safety/ Environmental regulation

2. Work closely with Safety dept. to ensure safety/ environmental compliance

Organise and transfer fabricated products to projects operation department for site installation

1. Ensure on time & quality delivery to clients/sites/operation

2. Liase with Supply Chain dept. to deliver the products to clients/site

Manage a team with good technical knowledge & innovation in fabrication design

1. Build and train a competent technical team

2. Set up a quality control process within the fabrication dept.

3. Work with Engineering Services Dept. to innovate fabrication design.

• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure), and technologies associated with the ISP market
• Possess robust analytical and problem-solving abilities, with a talent for addressing technical and operational challenges
• Skilled in network operations and maintenance, enthusiastic about offering troubleshooting assistance.
• Preference for IT audit experience or certification in CISA/CISM, operational risk management, self-assessment of control, prior implementation of security solutions, and information security governance experience.
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Networking and Wireless LAN.
• DDI, AAA/Cisco Identity Services Engine
• Python & Ansible for Automating Networks
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Certification: Comparable to CCNP/CCDA
• Meraki, Palo alto, f5 loadbalancer, UTP
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Conduct a network audit to pinpoint any deficiencies and propose appropriate solutions. Assisting with RFP/RFI reply.
• Experience in running operations with ITIL processes / Project Management - PMP

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

• Offering technical advice on a construction site for subcontractors
• Managing the site and parts of construction projects
• Overseeing building work and ensuring the quality of the work
• Setting out, levelling and surveying the site
• Ensuring the plans, drawings and quantities are accurate for calculations
• Supervising site security, health and safety
• Organising and overseeing material and human resources.
• Managing the design documents supplied by the client
• Liaising with the local authority to ensure compliance with local construction regulations and by-laws
• Reporting progress and other updates back to clients
• Planning the work efficiently and adapting to any setbacks or difficulties
• Able to work 6 days a week, long working hours on construction site

Job Description

You will help to design and develop Guidance, Navigation and Control (GNC) systems and algorithms for our drone systems and be part of a tight-knit team that provides safe, reliable drone systems and quality services to our distinguished customers in Singapore and around the region.

Your responsibilities will include:
• Design, develop and modify guidance, navigation, and flight control systems and algorithms for our unmanned aircraft systems.
• Develop and modify 6-DOF and hardware-in-the-loop (HIL) simulation environments. • Select, test, evaluate and integrate new sensors or navigation systems onto our drone systems.
• Write, modify, and test firmware and flight code that runs on the flight control computers of our drone systems (in C or C++).
• Analyze flight data to verify flight performance and to help to troubleshoot issues that are found during the flights of our drone systems.
• Generate documentation on the specifications, design, test procedures and test results of the GNC systems and algorithms that were developed.
• Participate in design and code reviews.
• Support ground and flight test activities.
• Work in a collaborative manner with staff in other engineering (e.g. system, software, safety, flight test, etc.) and business groups.

Requirements

• Bachelor’s/ Master’s Degree in Mechanical, Electrical, Aerospace, Controls, Mechatronics Engineering, or a field related to GNC.
• Good to have 3+ years of industry or other relevant experience in GNC
• Strong background in system modelling, system identification, parameter estimation, frequency response analysis, classical and modern control theory.
• Experience in system modelling and control, analysis, and simulation in aircraft applications.

• Experience in developing model-based design and analyses using MATLAB/Simulink.
• Knowledge in inertial and other type of sensors for navigation (e.g. accelerometers, gyroscopes, magnetometers, GNSS receivers, pressure sensors, ranging sensors, etc.)
• Knowledge in Kalman filtering, digital signal processing and sensor data fusion.
• Proficient in C/C++ programming language.
• Proficient in software and development tools such as Linux, ROS and Git.

Electrical Engineer (Satellite, Radio Frequency)/ Geotechnical Engineer

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

Our client is leading player in the FMCG industry. They are looking for a Supply Chain Planner to assist their team for the next phrase of their business. They are located in the West are – easily accessible.

Job Responsibilities

• Monitor daily operations and coordinate with 3PL warehouses to resolve inbound and outbound issues.
• Coordinate special operations with 3PLs, like transloading, to optimize goods movement.
• Start outbound order processing with 3PLs based on demand and logistics plans.
• Investigate and report damaged goods incidents.
• Advise logistics planners on products to be returned to a site based on stock needs, optimizing storage space and product mix.
• Maintain and update the emergency distribution plan.
• Develop detailed demand and capacity forecasts for goods.
• Create weekly resource forecasts based on stock arrival schedules and rotation strategies.
• Produce weekly forecasts on site utilization rates to predict when a site will reach full capacity.

Job Requirements

• Minimum 2 years of experience in logistics or supply chain management, focusing on warehouse operations or stockpile management.
• Strong understanding of 3PL operations and best practices.
• Excellent analytical and problem-solving skills.
• Proficient in spreadsheet software (Excel preferred) for data analysis and forecasting.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Regional Supply Planning Expert

Main Responsibilities

1 - Project management

• Deployment of Planning initiatives at regional and local/site level to optimize the balance of cost and quality of customer services
• Identify and drive continuous improvement programs both internally and together with Supply Planning partners to deliver targeted service levels and costsLead change resulting from continuous improvement and/or supply chain initiatives (e.g. SCM Excellence, Regional PC)
• Monitor service level (by the mean of KPIs) to achieve customer satisfaction, reduce complaints/damaged goods and solve repetitive problems with internal/external suppliers
• Actively participate to Regional Supply Chain Management projects
• Coordinate idea generation to project process for the regional supply organization

2 - Subject matter expertise

• Provide direction on Supply Planning activities in the Sites
• Use performance management to actively improve processes, suggesting actions/ projects/ programs

Main Qualifications

• Bachelor's degree in Engineering, Supply Chain Management, Operations Management or related discipline
• Min. 7 years of experience in manufacturing operations with strong background in supply chain planning, quality and/or materials management, including exposure to business process redesign and systems implementations

Logistics Executive

• Location: Tuas (Have company transport / Transport Allowance $120 if possess own transport)
• Basic: $3000 to $3500
• Working hours: Monday to Friday (8am to 5pm), Saturday (8am to 12pm); Alt Sat off

Requirements

• Min ITE holder/Diploma holder with at least 3 years of relevant working experience
• Possess class 3 driving license

Compliance:-

• Adhering to Standard Operating Procedure & Risk Assessment.
• Drafting of Standard Operating Procedure & Risk Assessment.
• Adhering to Company’s Policies.
• Adhering to Company Safety Rules.

Responsibilities

Operations:-

• Scheduling of daily collection / delivery.
• Resolving daily collection / delivery issues.
• Tabulate trip allowances.
• Conduct weekly toolbox / training session.
• Perform cross training for team members.
• Ensure the maintenance of all vehicles.
• Submission of Safety Induction Course / Other related courses.
• Responsible for team performance & discipline.
• Work closely with Customer Service & Operation Team.
• Act as backup for other fleet supervisor during their absent.
• Coordinate ah-hoc emergency response.
• Off on alternate Sat / Standby 24/7.
• Incident report submission – lead investigation/determine root-cause/corrective & preventive plan.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

• Coordinate production scheduleto ensure meeting customer’s requirement and attend to all enquiries related
• Weekly review on material availability, shipment schedule to meet the distribution/ allocation plan and customer
• To investigate stock discrepancies and work with stakeholders to maintain stock accuracy & integrity.
• Analyze and highlight business risk and opportunity to stakeholders and jointly propose appropriate mitigation plans.
• Conduct forecast sufficiency & reasonability checks and share trends insight and recommendation
• Monitor and analyze SCM KPI and propose for improvement.
• Regional coordinator for annual tender data collection, special requirement, analyse tender data.
• Other adhoc duties as assigned.

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

Logistics Executive

Location: Tuas (Have company transport / Transport Allowance $120 if possess own transport)

Basic: $3000 to $3500

Working hours: Monday to Friday (8am to 5pm), Saturday (8am to 12pm); Alt Sat off

Requirements

Min ITE holder/Diploma holder with at least 3 years of relevant working experience

Possess class 3 driving license

Compliance:-

Adhering to Standard Operating Procedure & Risk Assessment.

Drafting of Standard Operating Procedure & Risk Assessment.

Adhering to Company’s Policies.

Adhering to Company Safety Rules.

Responsibilities

Operations:-

Scheduling of daily collection / delivery.

Resolving daily collection / delivery issues.

Tabulate trip allowances.

Conduct weekly toolbox / training session.

Perform cross training for team members.

Ensure the maintenance of all vehicles.

Submission of Safety Induction Course / Other related courses.

Responsible for team performance & discipline.

Work closely with Customer Service & Operation Team.

Act as backup for other fleet supervisor during their absent.

Coordinate ah-hoc emergency response.

Off on alternate Sat / Standby 24/7.

Incident report submission – lead investigation/determine root-cause/corrective & preventive plan.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Responsibilities:

• Ensure deliveries are executed in a Timely and Right First Time manner to foster customer satisfaction, and pro-actively communicate delivery related information and mitigation plans (where appropriate) to stakeholders.

• Ensure Transport Service Providers operate in Safe and Compliance (Quality and Business) fashion.

• Review, develop, monitor, and enforce the appropriate Service Level Agreement with Service Providers.

• Handles IG (Internal Group) freight

• Manage daily OBD creation and fix any OBD related issues

• Support IG freight internal stakeholder’s requests, updating and monitoring shipment schedules .

• Liaise closely with external freight forwarders on vessel schedules, documentation and any operational issues.

• Liaise with external WH on any shipment related issues such as SUT, pack code and documentation.

• Review escalation of issues from customers' or shippers' and reviews complaints regarding distribution services.

• Attend daily logistic meeting to update shipping documents KPI and findings to the team.

• Initiate and manage projects related to service, efficiency and / or savings improvements and drive all team members to engage in Continuous Improvement initiatives for their respective area of responsibility.

• Opportunity to understand and experience full range of shipping documents such as E Form D, ACWS, Certificate of Origin, Letter of Credit etc

• Review escalation of issues from customers' or shippers' and reviews complaints regarding distribution services.

We value:

• Diploma/Degree holder majoring in Supply Chain or business-related discipline.

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Outsourcing Team
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Job Overview

The Supply Chain & Procurement Senior Executive is responsible for handling incoming and outgoing shipping and procurement, and overseeing efficient office and factory operations.

Key Responsibilities

• Procurement Management:Develop and implement procurement strategies to optimize sourcing and purchasing processes.
  Identify, evaluate, and negotiate with suppliers to secure the best terms and prices.
  Monitor supplier performance and manage relationships to ensure compliance with agreements.
  and transportation to ensure efficient distribution of products.
  

Supply Chain Coordination:

• Oversee the supply chain operations, ensuring timely and accurate order fulfillment.
• Coordinate logistics for incoming and outgoing shipments, including scheduling and documentation.
• Collaborate with internal departments (e.g., production, sales, finance) to align supply chain activities with business objectives.

Operations & Compliance :

• Ensure Supply Chain policies and procedures are up-to-date and compliant with local regulations
• Oversee the maintenance of supply chain records

Shipment Coordination:

• Manage the logistics of incoming and outgoing shipments.
• Collaborate with suppliers and shipping companies to ensure timely deliveries.
• Track inventory levels to align staffing needs with shipment schedules.
• Analyze shipment data to identify trends and improve processes.
• Handle any shipment-related issues or discrepancies

Administration & Office Management :

• Oversee day-to-day administrative operations, including office and factory supplies purchases, and facility management
• Administer tasks relating to office and IT equipment, including notebooks and employee email accounts
• Manage relationships with external vendors, service and logistic providers, ensuring proper execution and maintenance of contracts and agreements
• Manage the office budget and ensure efficient use of resources
• Plan and organize company events, meetings, and other activities, ensuring smooth execution and coordination

Qualifications & Requirements

Professional Experience

• Minimum of 5 years of experience in procurement and shipping or a similar role.

Skills and Competencies

• Leadership: Strong leadership skills with the ability to inspire and motivate teams.
• Strategic Thinking: Ability to align Operational strategies with business goals.
• Communication: Excellent verbal and written communication skills with the ability to interact effectively at all levels.

Knowledge of Local Regulations

• In-depth understanding of Singapore’s shipping and procurement procedures and compliance requirements.

Personal Attributes

• Problem-Solving: Strong problem-solving skills with a proactive approach to challenges.
• Interpersonal Skills: Excellent interpersonal skills with the ability to build and maintain effective relationships.

What a Market Supply Chain Operation Planner does at HP:

• Get involved in supply chain processes, such as inventory analysis, order fulfilment, import/export operations and shipping, for a regional or global business unit.
• Produce reports using IT systems and analyze data to develop trends for supply and demand activities, articulate findings to management.
• Analyze backlog management and enable supply availability.
• Gather demand data from country, region, and account managers to contribute to market operations demand planning and supply match.
• Collaborate with regional and global business unit planning teams to maintain and enhance current business processes.
• Review performance metrics on a regular basis, identifying opportunities for improvement.
• Research and analyze priority projects within established guidelines.
• Communicate requirements and guidelines to the regional and global business unit planning teams.

Individuals who do well in this role at HP, usually possess:

• University degree with a focus in Supply Chain/Logistics or equivalent.
• Minimally 2-4 years of experience in a Supply Chain function.
• Demonstrated understanding of supply chain processes (plan, source, make deliver).
• Strong analytical and data modeling skills.
• Developed Microsoft Office skills (Excel, PowerPoint, etc) and other analytical aids to help manage the operation.
• Strong understanding of Material Requirements Planning (MRP) and Available to Promise (ATP).
• Developed understanding of import/export regulatory requirements and compliance.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices globally.

6 months contract (Maternity Cover)

Job Descriptions:

• Coordinate with cluster entities on monthly MIS. Draw out reports and run analysis. Collate the MPR reports for the region for cluster review
• Track Price and margin matrix for entities
• Prepare daily sales dashboard for the region
• Tracking of SLOB movement across entities monthly
• Inventory tracking and Freight cost analysis
• Manage the complete supply chain operations within the target lead-time
• Receive, verify, and process orders from clients and partners, send Purchase Orders to suppliers and blending plants
• Follow/monitor the Order to Delivery cycle for each Purchase order & invoices to enable
• Complete all related documentation for supplies to enable payments and follow up for payments with customers
• Prepare management reports as well as analysing statistical data and KPIs
• Coordinate with Sales & Production for monthly forecast
• Address and resolve issues (delay, quality) and work closely with the front-line teams to ensure the best supply chain solutions

Job Requirements:

• Professional experience 3+ years, with relevant functional experience
• Diploma/Bachelor's Degree in Logistics & Supply Chain Management or or related field
• Working knowledge of SAP system is a must
• Action-oriented, entrepreneurial, flexible, and innovative approach to operational management
• A high level of attention to detail
• Ability to multi-task and manage external stakeholders
• Highly motivated team player who can work effectively on their own and as part of a wider cross functional team
• High-energy individual with good interpersonal skills
• only Singaporean or SPR need to apply

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Sales Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,000 + HP Allowance + Incentive
• Duration: Permanent

Key Responsibilities

• Conduct customer visits, managing the full sales cycle from prospecting through to follow-up, utilizing sales leads, cold calls, etc.
• Develop and refine sales strategies for targeted customers to drive revenue growth and increase market share.
• Foster and maintain robust business relationships with both new and current clients, ensuring prospective and ongoing satisfaction with products and services offered.
• Deliver exceptional levels of customer service, ensuring clients' needs and expectations are met or exceeded.
• Provide comprehensive technical presentations and product demonstrations that clearly articulate the features, advantages, and benefits of our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or with at least 2 years of relevant experience.
• Experience in equipment sales or related field would be advantageous.
• Candidates without experience are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66217 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114