As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Location: Changi

Responsibilities

1. Review contractor submissions

2. Ensure emergency preparedness

3. Attend meetings (site, progress, QAQC)

4. Monitor quality, progress, and compliance

5. Review drawings, method statements, and risk assessments

6. Coordinate As-Built information

7. Monitor defects rectification

8. Maintain daily records

9. Provide safety oversight

10. Liaise with authorities

Skills

1. Technical knowledge (civil/structural engineering)

2. Quality control and assurance

3. Safety management

4. Communication and coordination

5. Leadership and teamwork

Qualifications & Experience

1. 6+ years of experience in mechanical/electrical engineering

2. 3+ years in supervision of major construction works

3. Recognized M&E Engineering degree (PEB Singapore)

Key Responsibilities:

1. Lead M&E site staff

2. Monitor, supervise, and inspect works

3. Ensure compliance with statutory codes and quality control

Key Skills:

1. Technical knowledge (M&E engineering)

2. Leadership and supervision

3. Communication and interpersonal skills

4. Quality control and assurance

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the Project Team of TopSKY-ATC (HE).

ROLE DESCRIPTION SUMMARY

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Verification and Validation Engineer, you are accountable for:

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore. Be accountable for individual sales target to be determined by the Company.

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor etc.

• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.

• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.

• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.

• Track and report sales activities; submit weekly and monthly report promptly.

• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.

• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.

• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.

• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.

• Working closely with customers to find application possibilities and propose suitable technical solutions.

• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.

• Conduct product and application training.

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

Responsibilities:

• Be a member of the Process Engineering Team for top quality servers & storage products, maintain and update end to end production process & value stream mapping, cover end to end production process for better efficiencies thru process optimization, layout/work station enhancement as well as smart factory / automation projects
• Cooperate with the NPI PM team, Test Engineers, Quality, Production, Planning, Logistic and other departments to support production, including audit
• Support NPI ramp with propose new equipment, manage equipment readiness to support LVO, Engineering Change and customer requirement
• Ability to perform first level process issue triage and resolve issues locally where possible, analyze and identify process issue and deficiencies with follow up actions for resolution and improvement to meet goal for cost, quality and delivery.
• Escalate any process issue found to have major impact on quality, process and or cycle time if not able to resolve locally

Skills and Requirements:

• Bachelor’s Degree in Electrical / Electronics Engineering
• 3+ years of relevant work experience is preferred
• Strong IT background, experience with SAP is an advantage
• Technically know-how on Kaizen, 6 Sigma, PFMEA, DOE and/or 8D is a plus
• Experience with server & storage product is an advantage

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job Description:

• Manage and perform engineering/design execution, planning, and interface and ensure that activities are completed on schedule and within the budget.
• Prepare project execution and quality plans, projects plan of works, initial projects safety review, initial projects environmental review, and project control system.
• Coordinate with project managers, discipline engineers, designers, drafters and field staff, and ensure consistency in execution of project activities.
• Organize and conduct project meetings, technical, and progress reviews.
• Initiate and complete projects close-out and archiving.
• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Ad- hoc duties assigned

Requirements

• Degree in Civil / Structural Engineering recognised by the Professional Engineer Board
• At least 3 - 5 year(s) of relevant experiences in construction industry
• Knowledge of Autocad would be an advantage
• Good communicative skills, able to interact with people of all levels and teamwork
• 5.5 days work week

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

JOB SCOPE & JOB RESPONSIBITIES

• Prepare submission and approval of documentation
• Prepare RFQ, evaluate and recommend purchases
• Coordinate with Customer, Consultant and Inter-department
• Tracking progress and prepare reports

JOB REQUIREMENT

• Degree with Mechanical / Electrical / Chemical / Environmental

About Mikomiko Pte Ltd:

At Mikomiko, we are at the forefront of AI Technology and AI Solution development and deployment. Our expertise spans across machine learning, deep learning, multi-model learning, transformer, NLP, frontend, backend, cloud and embedded software development, to focus on AI Generated Content (AIGC) generation and beyond. Join us in shaping the future of AI and revolutionizing industries through innovation and advanced technology.

Job Description:

The incumbent attached under AI Software Development will be involved in AI software and Social Media platform development, frontend and backend development, integration and testing for AI product and AI platform, where AIGC, machine learning (ML), deep learning (DL), computer vision, speech processing, NLP, 3D and Computer graphics and their combination might be used.

Job Responsibilities:

As a full-time employee in AI Software Development, you will be responsible to:

· Lead the architecture, design, and development of robust full-stack solutions.

· Collaborate and work closely with product managers, designers, and AI developers to understand project requirements and design UI, develop and test AI system in docker for commercial applications or to improve existing products.

· Provide technical leadership and mentorship to junior developers.

· Assist the team to develop Web/Mobile application with frontend and backend (full stack) and deploy AI system with cloud service in applications

· Participate in code reviews to maintain code quality and ensure best practices are followed.

· Be involved in system integration and operation in DevOpps, with testing and evaluation work

· Continuously research and evaluate new technologies to drive innovation.

· Troubleshoot, debug, and optimise application performance and AI systems.

· Stay ahead of industry trends, continuously researching and evaluating emerging technologies to drive innovation.

Job Requirements:

· Proven experience as a Full Stack Developer, with strong skills on both front-end and back-end technologies.

· Programming skills with experience in GUI design and implementation, frontend and backend development, and cloud/server system design and integration in the use of programming languages such as C/C++, Python, Java, Javascript/Typescript, Swift programming, C#, web related programming; strong proficiency with Database, React, Angular, Vue.js., NextJS, Nodejs, Docker, embedded software development

· Solid understanding of database systems (SQL, NoSQL).

· Extensive use of APIs and strong understanding of HTTP(S) and REST architecture.

· Knowledge of cloud services and deployment (AWS, Azure, Google Cloud, Firebase).

· Familiarity with DevOps practices and CI/CD pipelines.

· Experience with micro-services architecture.

· Familiarity with containerization and orchestration (Docker, Kubernetes).

· Ability to quickly develop expertise in new domains and products, and eagerness to master new challenges.

· Strong communication, collaborative, leadership abilities along with analytical and problem, solving skills

Additional advantages:

· Experience with data stream processing, data platforms at scale and distributed systems i.e. Spark, Kafka, Hadoop.

· AI application and deployment in limited resource with the performance optimization.

Educational Requirements:

· Bachelor’s degree in Computer Science or related field with of 3 - 6 years hands-on programming experience.

Benefits:

· Gain hands-on experience in a leading AI company at the forefront of technological advancements.

· Work closely with a diverse team of experts and professionals in the AI industry.

· Flexible working hours with official annual leaves, medical leaves, insurance provided.

· Potential for performance-based incentives

Job Description:

Responsible for field test of the mobile communication module, capturing bug log, writing test daily reports, sorting and uploading test logs, etc;

Job Requirements:

1. Be familiar with the basic principle of wireless communication and 3GPP protocol;

Experience in GSM, LTE-related wireless network test optimization, vivo or field test of other mobile phone manufacturers, familiar with mobile phone and network-related interactive signalling is preferred.

2. Skillfully use common log capture analysis tools, such as Qualcomm's qxdm, qpst, qcat, etc.

3. Major in computer and communication, college degree or above.

4. Speak fluently English and local language.

5. Legal visa and residence permit.

6. Can do all local operators post-payment card.

7. Work in an office.

Job Description

• Testing: Setup controllers with motors. Tune the system and perform functionality tests for new functions and features.
• Debugging: Replicating issues that customers face and liaising with R&D to report bugs.
• Advanced Debugging: Looking into the code base to find the bug, and test a fix.
• Feature Development: Customize features for specific use cases.
• Electrical Design: Adhoc designing of interface cables, drawing electrical diagrams. (No pre-requisites for electrical knowledge required)

Qualifications

• Candidate must process at least Bachelor Degree in Mechanical / Electrical / Mechatronic Engineering or equivalent OR-Fresh graduates with relevant knowledge in their course of study are welcome to apply.
• Knowledge in programming and / or experience in automation field are added advantage
• Preferably with 3 Year(s) of working experience in Motion Controls, High precision, Semiconductor, Machine building, Manufacturing.
• Dealt with applications project, delivery to customers, facing with customer and deadline pressure.
• Ability to apply critical thinking to solve a vast spectrum of potential issues.

Other Information

Skillset(s) Requirement:

• Fluency in Chinese, both written and spoken
• Knowing how to speak Hebrew is a huge plus
• Strong communication skills
• Strong social skills and intuitive feel for group dynamics

Attributes:

• Strong communication skills necessary
• Life long learning mindset
• Kind, friendly and approachable

Responsible in the preparation of line index, tie-in list, piping layout and information, loading calculation, MTO sketch, BM/BQ, and 2D/3D CAD modeling of piping system, equipment and structure, interference detection, and model review.

Has the technical responsibility for developing stress/vibration sketch/model, and mechanical data, for interpreting moment, stress, reaction force, and displacement, and for coordination these responsibilities with reports to ensure timely completion that meets project schedule and budget.

Duties & Responsibilities:

• Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• Prepares line index, tie-in list, piping layout, piping information, loading calculation, steam trace layout, MTO sketch, BM/BQ, plan and isometric drawing in compliance with project standards, specifications, contract requirements, and accepted engineering and construction practices.
• Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation, prepares mechanical data, and performs calculation for initial displacement with assistance of Senior Piping Engineer.
• Assists in developing model for stress/vibration analysis, interprets and evaluates result, and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.
• Performs highly specialised 3D CAD modeling of equipment, structural, and piping system, interference detection, annotation, model review, and plan drawing extraction according to project 3D modelling procedure and by the use of PDS Intergraph or SP3D CAD software.
• Prepares steam trace piping drawings and pipe support drawings in 2D CAD format.
• Assists the Senior Piping Engineers or project Key Person in field survey work to develop conceptual routing, verify tie-in location, and other related activities.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Bachelor’s Degree in Mechanical or Chemical Engineering with 5 years of experience.
• Training will be provided.
• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software. Capable to utilize AutoCAD/Cad Pipe /Microstation 2D CAD; PDS Intergraph and SP3D softwares with minimal assistance.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyse and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication.

We are looking for a Software Engineer who are inquisitive self starters that are able to thrive well in ambiguity who enjoys being at the forefront of a revolution in technology. You will be challenged with solving complex problems daily. If you are passionate about the future of decentralized finance, with strong desire to leave your mark on the Web 3.0 space, we want you!

Responsibilities:

• Design, architect and implement core features and peripheral contracts
• Design and write thorough unit and integration tests to test the developed smart contracts under various scenarios to ensure the dApp security
• Research and explore other protocols and programming models
• Maintain well-written documentation for internal and external users
• Improve development tooling and productivity in the smart contract team
• Participate in public protocol discussions on Discord or Twitter

Requirements:

• 1+ years of experience in writing smart contracts (in either Solidity, Rust, or equivalent) that have been deployed to a production mainnet.
• 4+ years of experience in software engineering. Able to develop backend and automation scripts in Typescript, Javascript, Shell and/or Python.
• Have good knowledge of data structures and optimisations
• Proficient in verbal and written communication in English
• Remote friendly but must be willing to work around GMT +8 Timezone Primarily

Overall Summary:

Senior Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

Description

This job position is suitable for individuals who are constant learners, problem solvers and multi-taskers. Candidates who thrive in a fast-paced environment, steps up to face challenges, and are able to deliver results, are welcome to apply. We are looking for candidates who are interested in doing Implementation and Operation of Infrastructure in Cloud.

Responsibilities

• Responsible to deploy and Maintaining Server (Windows or Linux) deployed in Cloud Infrastructure
• Ensure that all OS, software and cloud services are up to date to support the cloud infrastructure
• Provide support related to customer issue with the Cloud Infrastructure.
• Work closely with IT security to monitor privacy and develop incident-response procedures

Requirements

• Bachelor’s degree in computer science, Information Technology, or related field.
• Must have minimum of 4 years' experience working with Linux and architecture.
• Proven experience in:
  Building and managing both Windows and Linux servers in cloud environments.
  Strong scripting and automation skills (e.g., Python, Bash and PowerShell).
• Minimum 2 years of experience with cloud providers (AWS or Google Cloud Platform).
• Must have Linux/Unix system administration experience (e.g. system troubleshooting, install software, modify operating system and application configuration).
• Require networking knowledge for troubleshooting network routing and firewall issues.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and collaboration skills.
• Configure Agency’s existing Log Management System(s) to forward logs to GCSOC
• Set up LMS(s) at Agency (if they don’t have), either on physical server or virtual machine
• Only Singaporean / SPR that may apply

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

IT Support Engineer

Responsibilities:

- Installing and configuring computer hardware, software, systems, networks, printers etc

- Responding in a timely manner to service issues and requests

- Providing technical support across customers

- On-site support for IT related issues at customer office

- Performing & maintaining customers’ IT inventory list

- Handling server related issues through the ticket system, escalate to server supplier TAC and follow up accordingly.

- Replace parts for servers like mainboards, CPU, RAM, HDD/SSDs, network linecards / modules, transceivers and cables

Requirements:

- Diploma in Computer Science, Information Technology or related disciplines

- Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community.

- Troubleshooting & Problem-solving skills

- Ability to determine computer problems and to coordinate hardware, software, and/or network solutions.

- Ability to communicate technical guidance and instruction to users on the use of PC and/or mainframe applications and systems.

Capable of working in a fast paced environment

- Knowledge of a wide range of computer systems software, applications, hardware, networking, servers and communications.

- Familiar with data center environment is a PLUS

------------- Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com EA Registration Number: R22108564

Data provided is for recruitment purposes only Business Registration Number: 201735941W. Licence Number: 18S9037

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages