Job Responsibilities:-

• Perform verification of modules and subsystems including digital signal processing modules, networking components (eg. packet processing/protocol accelerator modules) as well as in high speed peripheral interfaces (integration of analogue IP modules such as SerDes PHYs) for complex IC/SOCs
• Own and create verification plans based on specifications
• Develop testbenches in SpecmanE/SV/UVM environments for RTL simulations and GLS
• Create and run directed and random testcases to achieve coverage targets and validate functional and performance requirements of design
• Support and provide verification expertise and documentation to meet engineering challenges, schedule and quality goals through executing in-house methodology and standard industry tools
• Collaborate closely with cross domain teams including silicon/system architects, designers, system validation and SW engineering teams to ensure successful pre/post silicon validation of these IPs or subsystems in ASIC/SOC products
• Create solutions to support continuous improvement and learning in digital IP verification methodologies and flows

Job Requirements:-

• Bachelor or Master’s Degree in Electronics/Communications Engineering
• 8 years and above of experience in Digital IC verification at IP/subsystem level
• Strong fundamentals and proven expertise in digital IC verification methodology, programming and SOC
• Specialization in High-Speed Interfaces and industry protocols standards such as PCIe, USB, Ethernet IEEE 802.3 standards, AXI, AHB buses etc.
• Strong RTL verification skills using SpecmanE/C/SystemVerilog/UVM methodology
• Expertise in RTL simulations and GLS debug using industry standard tools
• Expertise to achieve comprehensive Functional and Code coverage using industry standard tools
• Knowledge and expertise in understanding standards, specification or requirements documents and define test environment, test plan to meet the requirements
• Experience in development of Verification IP, Bus functional models, Monitor, Protocol checkers and setting up of regression environment
• Knowledge and hands on experience of scripting languages (Python, Perl) and expertise in using them to automate verification tasks and regressions
• Knowledge and hands on experience with testing pre-silicon prototypes as well as post silicon testing in a lab environment is desirable
• Strong analytical, problem solving and debugging skills
• Proven written and verbal communication skills that demonstrate clarity of thought and conviction

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

You will lead a cross-functional team to develop a B2B e-commerce cybersecurity platform with SaaS functionality based on existing in-house solutions.

Responsibilities:

• Familiarize with Ensign’s business domain of cybersecurity and existing in-house tools.
• Guide the outsourced team in the development of a B2B e-commerce platform
• Lead the development of SaaS-flow for existing in-house cybersecurity solutions, to enable them to be accessed via the B2B e-commerce platform.
• Be familiar with both front-end and back-end dev and UIUX design to guide a small development team working on the above project.
• Familiarity with cybersecurity domain is preferred.
• Evaluate potential solutions relating to analytics web applications and make recommendations to solve business problems
• Deploy to and administer cloud-based web application platforms
• Monitor and respond to production issues
• Ability to design and supervise QA / testing for code

Requirements:

• BS/MS in computer science from a reputable university (preferred, or sufficient certifications to demonstrate technical knowledge)
• Minimum 5 - 8 years of experience working on web applications, preferably with SaaS development experience
• Deep knowledge in Javascript as a full-stack dev.
• Preferably some experience working with e-commerce platforms.
• Experience with cloud-native development and deployment
• A creative thinker who understands User Interface design
• Strong awareness of data security, data governance and performance, with an ability to deliver these key non-functional requirements
• Excellent technical skills

You will lead a cross-functional team to develop a B2B e-commerce cybersecurity platform with SaaS functionality based on existing in-house solutions.

Responsibilities:

• Familiarize with Ensign’s business domain of cybersecurity and existing in-house tools.
• Guide the outsourced team in the development of a B2B e-commerce platform
• Lead the development of SaaS-flow for existing in-house cybersecurity solutions, to enable them to be accessed via the B2B e-commerce platform.
• Be familiar with both front-end and back-end dev and UIUX design to guide a small development team working on the above project.
• Familiarity with cybersecurity domain is preferred.
• Evaluate potential solutions relating to analytics web applications and make recommendations to solve business problems
• Deploy to and administer cloud-based web application platforms
• Monitor and respond to production issues
• Ability to design and supervise QA / testing for code

Requirements:

• BS/MS in computer science from a reputable university (preferred, or sufficient certifications to demonstrate technical knowledge)
• Minimum 5 - 8 years of experience working on web applications, preferably with SaaS development experience
• Deep knowledge in Javascript as a full-stack dev.
• Preferably some experience working with e-commerce platforms.
• Experience with cloud-native development and deployment
• A creative thinker who understands User Interface design
• Strong awareness of data security, data governance and performance, with an ability to deliver these key non-functional requirements
• Excellent technical skills

Position Overview:

The Systems Engineer is a specialist within EOS Defence Systems (EOS DS) and is responsible for designing, implementing, and maintaining the technology systems. Duties include designing the basic computing infrastructure to accomplish key tasks. The role is also responsible for applying knowledge to the development of products and designs that support the product development and product goals of EOS.

Systems Engineers are responsible for assessing systems, determining problems, providing solutions to issues that arise, designing systems, upgrading systems, maintaining systems, and brainstorming possible improvements that can be made to a system in the future. Some of their other primary responsibilities include.

Primary Duties:

Carry out various engineering tasks, such as performing calculations to ensure our systems meet the global safety standards and collaborating with technicians and computer programmers to solve emerging issues. You’ll also research on manufacturing processes and analyse data and trends to create new products.

Ultimately, you will improve our company’s products and processes and contribute to its growth.

Responsibilities

• Manage and monitor all installed systems and infrastructure.
• Install, configure, test, and maintain operating systems, application software and system management tools.
• Proactively ensure the highest levels of systems and infrastructure availability
• Monitor and test application performance for potential bottlenecks, identify possible solutions, and work with developers to implement those fixes.
• Maintain security, backup, and redundancy strategies.
• Write and maintain custom scripts to increase system efficiency and lower the human intervention time on any tasks.
• Participate in the design of information and operational support systems.
• Provide 2nd and 3rd level support.
• Liaise with vendors and other IT personnel for problem resolution

We are a global Automotive Tier 1 Supplier. Headquartered in Singapore, R&D team in Singapore, Taiwan, Netherland and we have presence all over the world. We strive to provide best in class automotive display system to car manufacturer.

Job Description

1. Design of new technology and feature for automotive software platform.

2. Development of firmware for automotive display system products.

3. Participate on software related activities such as requirements engineering, architecture design and firmware design for automotive display system products.

4. Validation and verification of design for automotive display system.

Requirements

1. Degree in Electrical, Electronic, Mechatronic, Software, Computer Engineering

2. Programming skill in C, C++, C#, Python.

3. Knowledge of embedded system. RTOS, OSEK, AUTOSAR, QNX, AGL, Tresos, Vector.

4. ASPICE and ISO26262 experience is plus.

Job Description

• Responsible for hardware development of Body-, Door- or Seat control Units.
• Design: Analysis of requirements, schematic design with design-to-cost approach, component selection, worst-case calculation, generation of design FMEA (Failure Mode and Effects Analysis), documentation.
• HW sample build and HW prototype bring up.
• Validation: Electrical verification, thermal validation, EMC, reliability tests.
• Design of test environment for project test benches, EMC and reliability tests.
• Interface to manufacturing: Generation of bill of material, product test specification support.
• Participate actively in knowledge transfer between application and platform teams and different worldwide development locations.

Qualifications

• Bachelor or Masters Degree in Electrical Engineering or similar studies.
• At least 2 years working experience in automotive industry or embedded system development is preferred.
• Know-how and experience in analog and digital electronic design, simulation, test and validation.
• Good knowledge in using E-CAD, simulation and calculation software tools.
• You are pro-active, self-motivated and a team player.
• Candidates with right experience in electrical engineering shall be considered for Senior or Principal position.

Job Description

• Generate system requirement specifications for Architecture and Networking (AN) Product Portfolio.
• Analyze customer requirements specifications and link them to Continental specifications.
• Clarify and negotiate all open items related to specification with customer.
• Setup and maintain requirement engineering framework (requirement management).
• Support product development teams by defining product electrical interfaces, product functional specifications, communication interfaces and diagnostic interfaces.
• Support System Architect in defining the system architecture.
• Support SW Engineers for refinement of specifications.
• Support validation team and customer, on-site, during system integration and system validation phase.
• Support sales team in acquisitions for activities in terms of technical quotations.
• Participate actively in knowledge transfer between application and platform teams and different worldwide development locations.

Qualifications

• Bachelor or Masters Degree in Electrical Engineering, Computer Science or similar studies.
• You are pro-active, self-motivated and a good team player.
• Good verbal and written communication, technical presentation skills.
• Passionate to work in new technology trends in Automotive like 4G/5G connectivity, UWB localization, High performance computers, Cloud connectivity, Automotive ethernet, Firmware update over the air (FOTA) etc..
• For senior positions you need to have completed at least 2 relevant projects as Requirement, Software or Test Engineer.
• Working experience in automotive industry or embedded system development will be an advantage.
• Good understanding of End to End system with good software and electronic background.
• Experience in working with distributed systems, vehicle automotive and wireless functions will be an advantage.
• Basic know-how on requirement management tools like DOORS is preferred.
• Ability to work in international teams and with international customers.

Job Responsibilities:

• Manage customers on forecasting and ordering
• Analyse Price trends and forecast for account
• Follow-up on leads with new customers
• Service and maintain existing customer account
• Handle customer request and queries (e.g. short-time orders, etc.)
• Identify and respond to customer needs
• Establish and offer competitive price to customers
• Prepare and issue Sales Quotation using SAP
• Maintain inventory level for customer orders and optimise delivery
• Negotiate purchase pricing with suppliers for competitive advantage

Job Requirements:

• Possess a Diploma or Bachelor’s Degree, preferable inengineering
• At least 1 year of working experience in relevant fields
• Understand customer requirements and propose suitable solutions
• IT savvy and knowledge in MS Office and SAP
• Persuasive and Negotiation Skills
• Cost Management Techniques
• Listening and communication skills
• Customer Relationship Management

Job Description

• Supervise and coordinate the activities of site contractors;
• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all Structural work is carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications.

Requirements

• Degree in Civil/Structural Engineering recognised by the Professional Engineers Board Singapore
• Min 5 years of HDB new build or JTC projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Software Engineer – Job Description

• Duties and responsibilities:Involved in design and development of requirements that improve on our software UroX suite.
  Maintenance and improvement of software code that are developed by third-party vendors.
  Any other software development tasks assigned
  Document software designs and code changes.
  Examples of work:
  3D visualization.
  Develop algorithms making use of artificial intelligence.
  Image processing, including image segmentation, multi-planar reconstruction, fusion of MRI with ultrasound, pattern recognition, and visual overlays
  Robotic control of a programmable electro-mechanical system
  User interface design
  Handle data connectivity e.g. to PACS / hospital networks, with considerations of cybersecurity
  Compliance with relevant regulatory standards such as IEC 62304 – medical device software – software life cycle processes
  

Software Qualifications and Skills

• Bachelor’s and/or Master’s degree in Computer Science, Computer Engineering or related technical discipline.
• At least 3 years of working experience in the related area.
• Proficiency in C++.
• Experience in Qt, Vtk, C# and Python will be an added advantage.
• Strong background in mathematics.
• Experience in image analysis, algorithm design 3D visualization, AI techniques, machine learning, computer vision algorithms will be an advantage.

Other requirements

• Good communication skills and can work well with others.
• Fast learner and independent personality.

The driving force behind our success has always been the people of AspenTech. What drives us, is our aspiration, our desire and ambition to keep pushing the envelope, overcoming any hurdle, challenging the status quo to continually find a better way. You will experience these qualities of passion, pride and aspiration in many ways — from a rich set of career development programs to support of community service projects to social events that foster fun and relationship building across our global community.

The Role

Working as part of a team of Technical Support Engineers, this role will be required to provide technical support and training to AspenTech customers for the Engineering suite of products (e.g., Aspen Plus and Aspen HYSYS). The ideal candidate should work as a team to accomplish the goals and objectives of the support organization and lead Southeast Asia and Australasia team as team leader.

Your Impact

Your time will be divided between solving customers technical problems with our Engineering software and delivering quality training on our Engineering product courses. In addition, your role will also involve engaging with our Sales teams in pre-sales consulting and other departmental projects as needed. More specifically your duties will include:

• Providing “Technical Solutions” to customers for Engineering products, through remote support telephone, web chat and e-mail.
• Maintaining high quality of support experience and KPIs to customers in terms of SLO, Customer satisfaction and Resolution.
• Driving improvements to our Engineering software through the communication of your own ideas and customer feedback to our R&D teams.
• Serve as a technical subject matter expert (SME) and provide technical leadership in specialized areas within our Engineering support team.
• Develop and maintain Engineering training course materials and curriculum to include newly released software features and functionality.
• Author white paper solution articles for publication to our user community through our support web knowledge base.
• Travel to our customer sites where required.
• Proactively engage with customers on onsite health check visits to identify roadblocks to using our software and ensure follow ups are conducted for timely resolution to identified issues.
• Participate in alpha and beta testing programs prior to new software version release dates to assess product quality and contribute to final product improvements.
• Support training course delivery for non-standard courseware where required by customers by engaging in creating course content and workshop examples.
• Provide coaching to new employees and junior team members

What You'll Need

• A Bachelor’s, Master’s or PhD degree in Chemical Engineering is required
• >12 years of previous experience in the chemical or oil and gas industries
• Dynamic modeling, Heat Exchanger design experiences are of advantage.
• Previous simulation and modeling experience in using Aspen Plus
• Excellent verbal and written communication skills in English
• Proficiency in Business Chinese and Malay will be of advantage
• Ability and motivation to do self-learning or self-training
• Willing to travel 30-40% time, both domestic and international.
• Strong customer relationship and troubleshooting skills
• Ability to work collaboratively within a team

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Diploma/Bachelor's degree in Civil & Structural Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Fresh graduate is welcome to apply

Job Description

· Serve as a technical authority and expert within the team.

· Provide technical leadership to a team of PCB engineers.

· Lead and oversee the design and layout of complex printed circuit boards.

· Stay updated on industry trends, emerging technologies, and best practices.

· Lead and oversee projects from conception to completion.

· Conduct thorough design reviews to ensure compliance with industry standards, design guidelines, and project requirements.

· Develop project plans, set milestones, and ensure projects are delivered on time and within budget.

· Implement and enforce quality assurance processes to deliver reliable solutions.

Job Requirements

· Minimum 5 years of relevant experience in leadership role.

· Degree in Electrical & Electronics Engineering /Computer Engineering.

· Possess strong knowledge in electronic circuit design and PCB layout.

· Proficient in PCB design software such as Altium, Cadence Allegro, or similar electronics design software.

· Good interpersonal and communication skills.

Job Summary: We are seeking a highly skilled and motivated Network L2 Engineer to join our ICT Infrastructure team. As a Network L2 Engineer, you will be responsible for the day-to-day operation and maintenance of our network infrastructure, which includes Palo Alto and Check Point firewalls, Cisco switches, Alcatel, Aruba ClearPass Policy Manager (CPPM), and other related devices. You will play a critical role in ensuring the availability, performance, and security of our network services.

Key Responsibilities:

1. Network Maintenance and Support:Perform routine maintenance tasks on network devices, including firmware updates, patches, and configurations.
   Troubleshoot and resolve network issues, ensuring minimal downtime.
   Monitor network performance and proactively address bottlenecks or anomalies.
   
2. Firewall Management:Configure, manage, and maintain Palo Alto and Check Point firewalls to ensure network security.
   Implement and maintain firewall policies to control traffic and protect against threats.
   
3. Switch Management:Configure and manage Cisco switches, ensuring optimal performance and network segmentation.
   Troubleshoot and resolve LAN/WAN connectivity issues.
   
4. Access Control and Authentication:Administer Aruba ClearPass Policy Manager (CPPM) for user authentication and access control.
   Ensure compliance with security policies and standards.
   
5. Documentation:Maintain accurate and up-to-date network documentation, including diagrams, configurations, and asset inventory.
   
6. Collaboration:Collaborate with other teams, including system administrators and security experts, to achieve common network goals.
   
7. Security Compliance:Ensure that network configurations and policies comply with industry best practices and security standards.
   

Qualifications:

• Bachelor's degree in Information Technology, Computer Science, or a related field.
• Cisco Certified Network Associate (CCNA) or equivalent certification is preferred.
• Proven experience in managing Palo Alto and Check Point firewalls.
• Proficiency in configuring and troubleshooting Cisco switches.
• Hands-on experience with Aruba ClearPass Policy Manager (CPPM) or similar access control systems.
• Strong knowledge of network protocols, routing, and switching.
• Excellent problem-solving and analytical skills.
• Effective communication and teamwork abilities.

Preferred Skills:

• Industry certifications such as CCNP, Palo Alto Networks Certified Network Security Administrator (PCNSA), or Check Point Certified Security Administrator (CCSA) would be a plus.
• Familiarity with network monitoring and management tools.

Associate Medical Laboratory Technologists (AMLT) are responsible for the daily operations of the laboratory which include phlebotomy, electrocardiogram, spirometry and clinical laboratory work.

Responsibilities

• Perform daily operations of the laboratory
• Perform all procedures in accordance with laboratory standard operating procedures (SOPs)
• Perform phlebotomy, Electrocardiogram (ECG) and spirometry in an accurate, efficient and professional way.
• Perform Point of Care Testing (e.g. Prothrombin Time, glucose) and clinical laboratory tests such as urinalysis (e.g. Urine FEME, dipstick, pregnancy), haematology (e.g. full blood count, peripheral blood film, erythrocyte sedimentation rate, prothrombin time), biochemistry (e.g. HbA1c, neonate bilirubin), microscopy examination (e.g. fungal smear, high vaginal swab) independently.
• Ensure specimen identification, processing and storage of test specimens are in consistent with good laboratory practices
• Perform and verify quality control for all analysers prior to patients sampling
• Use of Laboratory Information System (LIS) to perform functions such as result entry, result validation and tracking for outstanding tests
• Ensure all test results provided for clinicians are accurate and reliable
• Ensure analysers/equipment are functioning properly and are well maintained.
• Notify medical technologist/lab in charge when instrument malfunction and make arrangements with BME or instrument vendor to service the instrument
• Notify inventory person in charge when reagents and stocks supplies run low.
• Perform and record internal and external quality controls and calibrations. Troubleshoot outliers in accordance to work instructions.
• Ensure ‘critical value’ are reported to the relevant personnel within 30 minutes
• Ensure daily maintenance and QC records are up to date.
• Ensure compliance to hand hygiene, workplace safety, International Patient Safety Goals (IPSG) and International Standardization of Organizations (ISO) and other applicable regulatory and accreditation requirements of the laboratory.
• Provide prompt and courteous service in person or over telecommunication to all external and internal customers (e.g patients, doctors, service providers, colleagues).
• Report adverse incidents and all workflow anomaly to supervisor
• Observe strict NUHS personal data protection act and observe internet/intranet cybersecurity guidelines.
• Perform other functions as delegated by supervisor and/or lead laboratory

Requirements

• Recognized Diploma in Biomedical Science, Clinical Laboratory Science or other relevant fields
• At least 1-3 years of experience in laboratory environment and/or relevant experience in phlebotomy preferred
• Good verbal and written communication skills
• Ability to communicate in vernacular languages are an added advantage
• Ability to multi-task and work in a fast-paced environment
• Team player with good interpersonal skills

Radiographer is responsible for the providing prompt diagnostic imaging services to the patient, ensuring patient safety and proper care of equipment. Assist Centre In-charge/ Senior or Principal Radiographer to guide and supervise junior and student radiographers when required.

Job Responsibilities:

• Perform general radiographic examinations and/or at least one of the area of specialty including mammography and/or ultrasound and/or Bone Mineral Densitometry.
• Responsible for the safety and welfare of the patient.
• Maintain a clean and safe environment; adhere to safe work practices especially in radiation safety and infection control.
• Ensure proper usage and care for all equipment at the specific diagnostic centre.
• Perform other administrative duties or ad-hoc quality departmental projects/activities as assigned by the reporting officer/ Lead Radiographer
• Apply the ALARA principle for all procedures.
• Responsible for general housekeeping of the allocated diagnostic centre.
• Render prompt and courteous service delivery to external and internal customers.
• Ensure efficient running and operations of their area of responsibility.
• Assist the Radiographer-In-Charge / Senior or Principal Radiographer to ensure quality control procedures are performed diligently.
• Ensure AHPC certification is achieved after one / two years depending on qualification(s).

Job Requirements:

Required Skills and Experience
• Recognized degree in Diagnostic Radiography.
• Professional Licence: R1 license with Centre for Radiation Protection and Nuclear Sciences, National Environment Agency.
• Timely update and renewal of RI license.
• Registration with Allied Health Professions Council.
• Excellent written and verbal communication skills.
• Strong organisational skills and able to multi-task in a fast-paced environment.
• Participate in continuous medical education and quality assurance programs as directed by Radiographer In-charge / Senior or Principal Radiographer.
• Complete all assigned tasks in an organized and timely manner.
• Service orientated and customer focused. Have a compassionate, caring and friendly attitude.
• Able to work in a fast-paced environment and under pressure.
• Effective communications and coaching skills.
• Good team player.

Preferred Skills and Experience
• Mammography and ultrasound experience preferred.
• Ability to communicate in vernacular languages
• Knowledge of basic programming and advanced applications of MS Word, Excel and PowerPoint will be an added advantage.
• Knowledge of NGEMR, Epic usage and RISPACS would be an additional advantage.

(Please note that the working hours is on 5.5 days' work week)

Job Summary:

• Industry: Construction
• Job location: Tanjong Pagar/West Coast
• Working days: Monday to Friday (8.30 am – 5.30 pm) and Saturday (8.30 am to 12.30 pm)

Job Responsibilities:

• Prepare and submit weekly reports regularly, and maintain records
• Manage the quality assurance/quality control function on-site during various phases of the project
• Ensure that the approved Inspection and Test Plan (ITP) and Method Statements are implemented by the sub-contractor on site and the particular hold points required are coordinated with the Project Team
• Review ITP as submitted by the sub-contractors and ensure compliance with authorities or client's requirements
• Closely monitor site activities and fully coordinate with site engineers
• Issue NCRs in case of non-compliance
• Monitor and check calibration of plants, equipment, and testing instruments
• Monitor plant conditions and material production during the construction phase
• Approve the source of materials, and keep track of the testing, quality and usage of materials procured for the works
• Perform inspections of deliverables to ensure that material is as per approvals
• Take care of QA/QC documents of the entire project
• Carry out Internal Audit at the site as scheduled in the Project Quality Plan (PQP)
• Identify problems and root causes, and offer solutions

Job Requirements:

• Degree in Civil Engineering or equivalent
• Familiar with LTA projects job specifications in both civil and architectural works
• Possess experience in handling Conquas application procedure
• A minimum of 5 years of hands-on experience in concrete technology, inspection, quality control, and assurance, particularly in producing high-quality pre-cast reinforced concrete products.

By submitting an application or your resume, you are deemed to have consented to Elitez Pte Ltd collecting, using and disclosing your personal data for the purposes stated in our privacy notice (www.elitez.asia/privacy-policy/). You acknowledge that you have read, understood, and agree with the terms in our privacy notice.

We regret that only shortlisted candidates will be notified.

Registration No: R23113834

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

The Role:

We invite experienced C++ Software Engineers to apply as Software Engineers with us. We value proactive problem-solvers with expertise in C++, who take ownership of their work and show dedication to ongoing learning and growth.

Candidates who are adept at solving complex issues, especially those related to low latency or multi-threaded, are highly regarded at Rapsodo.

Responsibilities:

This role would be expected to:

• Be open to new concepts and ideas, demonstrate professional curiosity, and driven to succeed with a strong sense of ownership as a problem solver.
• Possess strong organizational skills, attention to detail, resilience, and adaptability in a dynamic environment
• Collaborate closely with Rapsodo's internal teams to ensure seamless integration of middleware solutions.
• Support middleware integration tasks across various technology platforms to support the development and deployment of sports data analytics solutions.
• Engage with a diverse range of applications and technologies, contributing to the dynamic and challenging nature of the role.
• Provide Tier IV and higher support for any outstanding technical issues.

Requirements:

• Bachelor’s Degree in Computer Engineering or Computer Science-related discipline
• At least 2-4 years of work experience in a relevant role. Fresh graduates with relevant skills and project experience may be considered.
• Demonstrate expertise in modern C++ and multithreading concepts, along with fundamental knowledge of Linux and Python / Bash scripting.
• Basic understanding of computer vision principles and solid fundamental knowledge of OS / systems / networking.
• Strong problem-solving skills with the ability to troubleshoot the most challenging technical issues effectively.
• Demonstrate a self-starting attitude with a strong desire to learn and an action-oriented approach
• Excellent teamwork skills and the ability to work cross-functionally.
• A background in Team Sports will be an added advantage!

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

Applications are requested for Research Engineer position on climate change, risk assessment of compound droughts and floods using the latest AI techniques and complex network theory under the supervision of Prof. He Xiaogang, Assistant Professor in the Department of Civil and Environmental Engineering at the National University of Singapore (NUS).

Job Requirements

• At least a bachelor degree in civil engineering, hydrology, water resources engineering, optimization, seasonal forecasting, machine learning, or from similar programs.
• Extensive experience in developing complex computer codes, e.g. in Python, R, or Shell.
• Ability to construct and write papers for leading research journals and conferences.
• Good written and spoken communication.
• Open to fixed-term contract.

Senior Linux Engineer – In this new role, you will be responsible for installing, troubleshooting, configuring, maintaining, and support Unix related servers, networks and related applications for WOG agencies.

You Will

• Server installation, Administration and performance optimization with RedHat 7/8/9.
• Provides technical assistance and support for applications, hardware problems. Prepare evaluations and reports on system efficiency and utilization
• Innovative and talented System Administrator who will be responsible for production up-time, health check-up of physical systems. Provide 24x7 support to critical production systems and team members.
• Performing root cause analysis of problems. Prepare a plan of action, implement changes, document all work completed
• Good written and verbal communication skills with the ability to communicate technical issues to non-technical and technical audiences.
• Migration Servers from RHEL 7 and 8 to RHEL 9
• Storage addition on RHEL/Solaris and IBM AIX servers
• Solaris 10/11 OS administration tasks with zones/LDOMS and ZFS.
• Make Sure RHEL and Solaris servers have latest security OS patches.
• Knowledge on Microsoft Azure, Load Balancers and Firewalls and OS cluster, Virtualization.
• User administration tasks on RHEL 7/8/9, IBM AIX and Solaris 10/11 servers.

You Bring

• Min. 4 years experience in RHEL 7,8,9 administration, implementation & Troubleshooting
• Experienced in Linux clustering & VM level Linux cluster
• Experience in OS installation, configuration and fine tuning
• Experience Linux security, OS hardening, Auditing
• Experience NFS / DNS / Automount administration and LVM / GFS / Filesystem administration
• Experience H/W troubleshooting & Vendor coordination
• Experience in Incident management, Change management, Configuration management
• Experience in Log monitoring/maintenance
• Engage in the maintenance and support activities, which include perform troubleshooting, incident response, and patching in a timely manner.
• Work with end users, architects and team lead in developing and implementing Unix and Linux related configuration changes based on requirements.
• Evaluate Unix and Linux platforms architecture and make recommendations as required.
• Coordinate with vendors and support team on problem resolution, implementation issues and upgrades.
• Good Experience Redhat OS repo creation & Troubleshooting for Patching ( Red hat Satellite management experience preferred )
• Willing to be on 24 x 7 stand-by for service contract and maintenance services in rotating basis
• Deep Experience Linux Crash dump analysis, logs analysis
• Experience in Squid Proxy server, Splunk installation, SMTP server , Apache & Tomcat webserver
• Good experience in automating with Shell scripting and ansible
• Basic experience in Public cloud knowledge

Job Summary:

Basic $3,500 - $4,000 + VB
Mon-Fri: 9AM - 6PM
Kallang

Job Objective:
To deliver solutions and services proposed through working closely with internal Teams, manufacturers, subcontractors, and suppliers.

Core Responsibilities:

• Lead, manage, collaborate, and work with internal staff like AV Designer, Drafter, Engineer, Site Engineer, Safety Officer, and external parties like, Consultant, Main
• Contractor, Subcontractor, Manufacturer, and Supplier.
• Study schematic design and construction drawings to produce AV construction drawings
• Manage Project schedules, Project budgets, change in orders, Bill of Material
• Manage customer’s expectations and deliver customer experience
• Plan, manage and schedule resources

Requirements:

• ITE/Diploma in any disciple
• Min 2 years’ experience in project management for construction sites or A&A works for M&E or ELV solutions like CCTV or infrastructure (Structure cabling)
• Able to interpret construction drawings
• Able to work independently in the fast moving and challenging environment
• Good Communication and Interpersonal skills
• Ability to use AutoCAD or REVIT
• Experience in managing project at construction sites
• Experience in interpreting BIM modelling
• Technical knowledge in Audio Visual Products

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Lau Jie Xi

Registration Number: R21103272EA

Licence No: 16C8004 (Elitez Pte Ltd)

Responsibilities:

• Co-ordinate between client requirement and needs.
• Project Budgeting, quotation and other admin work needed.
• Onsite co-ordination with supervisor with job scope requirement.
• Tendering of project whenever needed.
• Any other adhoc duties as assigned.

Requirements:

• Minimum Diploma in Engineering or related discipline.
• 2-3 years of related experience.
• Familiar with M&E code of practise and basic knowledge for ACMV.

As part of the H-Cloud Unix team, the incumbent will provide subscribed services for Unix/ Linux OS 24 x 7 administration and support. They are expected to be a team player, contributing to both operations and project support.

Role and Responsibilities

• Responsible for the administration and maintenance of Linux servers, RedHat Virtualization and Ansible, to:
• Provide day-to-day systems administration and operations, including 24 x 7 standby
• Plan and perform installation, configuration and migration of OS and related hardware and software
• Plan and perform scheduled preventive maintenance, OS patching/upgrades/hardening, after-office hours
• Troubleshoot incidents, system problems and handle escalations to vendors
• Provide system performance tuning, optimization and capacity planning
• Automate tasks and workflows, through shell, Ansible, Python, Ruby scripts and programming, including provisioning / deprovisioning of Virtual Machines (VMs), patching, configurations, software deployment, monitoring and integration with other tools
• Establish, standardize and maintain systems backup that is in line with recovery strategy
• Establish, standardize and maintain best practice processes, procedures, system documentation and reports so as to streamline and enhance the operational environment
• Provide technical support and advice for projects
• Fulfil service requests and change requests
• Proactively contribute to continual improvement programs
• Work/collaborate with other teams and vendors, where applicable
• Provide progress reports and to escalate issues to supervisor
• Work with various teams (VMWare, NetBackup, & hardware) as needed to support the infrastructure.
• Keep abreast of new technologies and its applicability to their area of work

Requirements

At least 6 years’ experience in the administration of Linux Servers in an enterprise environment.

Strong technical knowledge and experience in administration and maintenance of Linux(RedHat Linux/SUSE/CentOS) including:

• Clustering (Pacemaker cluster)
• RedHat Virtualization or Oracle KVM (oVirt)
• Storage Admin/SAN technology, in particular, from System perspective
• System and network security, including use of RBAC
• SSH/SFTP/SSL
• DR implementation
• Shell Scripting (Unix shell) Ansible, Python and/or Ruby will be an added advantage
• Knowledge of containers, Kubernetes and DevOps, Web servers, Tomcat will be an added advantage
• Certifications in the above administration skills will be an added advantage

Strategic Priorities:

1. Achieve Mechanical Design Engineer Level 2 expectations Successfully and shows potential

2. Be responsible for Mechanical design of equipment

3. Can prioritize activities in the engineering office

4. Support Mechanical Design Engineer Level 1 and 2 on engineering activities

5. Support the assembly and debug phases of the projects

6. Follow working instructions from Department Manager

7. Follow daily work activities defined by Project Manager

8. Additional responsibilities of Mechanical Design Engineer Level 2, Mechanical Design Engineer Level 3 or Assistant Project Manager may be performed as requested by Project manager

9. Be responsible for timely participating during meetings

10. Perform other duties as assigned by Project Manager

Main Responsibilities / Critical tasks

· Must be able to collaborate and communicate with all suppliers including systems’ vendors for all technical aspects as requested by Project Manager

· Pre-order standard material with internal Standard Factories as requested

· Must be able to improve and harmonize mechanical engineering practices as requested by Department Manager

· Participate in Project Design reviews

· Be responsible for successful design of systems to meet the budget and time expectations as defined by Project Manager

· Must be able to understand budgets and schedule controls

· Support Project Manager and Assistant Project Manager for the creation of the project internal URS

· Design pallets and critical stations based on project internal URS defined by supervisor.

· Be responsible for Design of mechanical cams

· Review cam designs and critical stations provided by Mechanical Design Engineer Level 1 and Level 2

· Support Validation team to create and test validation package per customer’s specifications

· Support Software Design Specification with the Control Engineer

· Release stations in the ERP system and follow up on delivery dates as instructed by Project Managers

· Be responsible for the creation and review of content of the assembly start package

· Be responsible for the creation of the assembly start package

· Be responsible for reviewing and approving the design of pneumatic schematics following project specific requirements

· Be responsible for accurately and timely generating the Mechanical Engineering documentation package assigned to each customer project

· Support debug activities on the floor as requested by manager

· Support manager to troubleshoot engineering modifications during debug phase. Identify problems and propose solutions in collaboration with the project team

· Must be able to communicate with Customer for technical aspects of a project as requested by manager

Skills and knowledge requirements:

· Successfully perform “Main Responsibilities/Critical Tasks” items as described above

· Ability to make sound decisions, work independently and within a team structure

· Ability to function in a fast-paced work environment

· Well organized and respectful of project deadlines

· Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management

· Have good knowledge of industry accepted engineering practices

· Have good knowledge in solid works/ Inventor

Behavior Competencies:

· Team worker able to develop and maintain excellent relations with managers, employees, and customers

· Flexible, confidential and organized while addressing diverse responsibilities

· Ability to clearly articulate ideas and present well to other departments within the company and external customers

· Positive attitude

· Intercultural communication skills (openness, respect towards others)

· Target and result orientation

· Self-driven but loyal to company

· Can deal with conflicts and criticism

· Sound judgment, ability to anticipate

· Eager to learn and demonstrate

· Well prepared, organized

· Honest, fact based

· Very responsive and services minded

· Able to adapt to change

· Able to motivate

· Ability to work with initiative, drive and passion

· Support the company goals, values, operating principles and philosophy

Qualifications:

Degree in Mechanical Engineering or equivalent

7 years of relevant working experience or successfully achieve Mechanical Design Engineer Level 2 expectations.

Responsibility:

1. Implement new robotic capabilities in adaptive control, integrated vision and sensory system.

2. Create software architecture, design and evaluate technologies to use.

3. Design, analyse, troubleshooting and debug systems and development software solutions for industry members by translating business requirements into system requirements.

4. Software development in C/C++/Python/ROS for robotic applications.

5. Integrated software with robotic hardware and mechanics to automate the adaptive robotic process.

6. Develop software system for localization, object detection & tracking, control of the robot · Computer Vision algorithm – object detection & classification · Localization algorithm based on Lidar, Camera, GPS · Sensor fusion algorithm for reliable, precise localization, object tracking · Embedded System interfacing with sensors, actuators

Requirements:

1. Software development experience (GUI, drivers, Linux-based development)

2. Development experience using C++, Python, openGL and OpenCV

3. Experience and expert knowledge of robot technologies, processes/techniques

4. Proficient in ROS

5. Experience with robotics or control system product design

6. Knowledge of industry standards for installation of industrial equipment.

7. Experience in the following areas: object tracking, sensor fusion, motion planning and coordination.

8. Bachelor’s degree or Diploma in Computer Science or Mechatronics.

8. 1 to 2 years work experience required however entry level candidates are welcome too.

9. On-job training will be provided.

Interested applicant may drop your resume to [email protected] or call 62952218