Duties/Responsibilities

Drive Project Operations Dept.

1. Assists Project Manager to overseas the projects in charge

2. Ensure the project engineering issues are on schedule/within budget

3. Work closely with Engineering Service dept. to ensure accurate & updated construction drawing

4. Work with Supply Chain & Procurement on machinery and materials orders

5. Monitor all the material wastage

6. Deployment of resources (manpower, material, machineries) required to achieve project schedules

7. Ensure the sub-contractors to achieve project requirement & schedule

Prepare Risk Management Plan

1. Build contingencies in to the plan to provide a reserve in the schedule for unforeseen future problems

Administer Workplace Safety and health (WSH) and Environmental Management Systems (EMS)

1. Ensure workers/sub-contractor comply with the company safety regulation

Organise and Proper Handover the Completion Project

1. Ensure proper accurate handover of construction documents to the Clients

2. Ensure the Sub-contractor submit the proper handover documents to the company

3. Ensure the project deliver by us and sub-contractor to client(s) on schedule with "0" defect

Manage a Team with Good Technical Knowledge

1. Build and train a competent Supervisor, Leadmen and worker team

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

Job Responsibilities

- Supervise Plumbing & Sanitary installation works.
- Discuss with Main Contractors, Sub-Contractors & Suppliers and Consultant if necessary.
- Documentation of method statement and work procedures.
- To develop, monitor, and review site construction activities to ensure work completion as scheduled.
- Manpower arrangement and supervise/manage site arrangement.

Working Day: 6 days per week

Job Requirements

Min 3 years experience in similar experience and managing a few sites.
Knowledge of Plumbing/Sanitary and Gas as an Advantage.

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

- In charge if production, scheduling ,planning and coordination of the assigned projects

- Liaise with contractors on the requirements of the projects

- To asisst the Site Manager in the coordination and execution of the projects

- To perform the duties which are assigned from time to time

- Must possess at least a Diploma in Civil or Building, degree or equivalent

· Please include your current and expected Salary in your resume

· Identify & develop new business opportunities

· Establish new accounts as well as maintaining with existing customers

· Meeting Company objectives and expectations

· Marketing function for new products

· Corresponding with customers on quotations and purchase order related issues

· After Sales service calls

· Diploma in Mechanical or other disciplines with or without experience.

· Dynamic, outgoing personality and self-motivated.

· Able to work independently as well as a team player in a fast paced and pressurized environment.

· Class 3 Driving License and possess own vehicle will be an advantage.

As a Senior Backend Engineer specializing, you will be responsible for designing, developing, and maintaining backend systems that support the integration and optimization of AI models & LLM in trading applications. You will work closely with the AI engineering team to integrate various machine learning models and algorithms into the backend systems to address business needs, ensuring high availability and low latency.

Key Responsibilities:

• Design, develop, and maintain backend systems and services that support AI models, ensuring high availability and low latency
• Integrate machine learning models and algorithms into backend systems for recommendation systems, predictive analytics, and other business applications
• Collaborate with frontend engineer, AI engineer and other stakeholders to identify business problems and design backend solutions
• Develop efficient APIs, ensuring high standards of performance, reliability, and security
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Document system design and API specifications to foster collaboration and transparency

Qualification & Skills:

• 4+ years of professional experience as Backend Engineer
• Proficiency in Python/ Typescript
• Strong understanding of database systems, including both SQL and NoSQL, and web development frameworks
• Solid experience in complex system design or architecture building.
• Familiarity with API design principles and best practices.
• Familiarity with caching mechanisms and cache invalidation strategies.
• Experience with cloud infrastructure, preferably AWS or GCP.
• Strong problem-solving, communication, and interpersonal skills.
• Passionate about AI/ML, with a keen interest in LLM technology.

We offer a competitive salary that is commensurate with the experience of the successful candidate

Project: HDB at Geylang (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 5 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Job Description:

• Be directly involved in building, assembling, testing, troubleshooting and improving Unmanned Ground Vehicles (UGVs) by working with system experts.
• Handle system integration, testing, data collection, and validation of UGV's performance.
• Perform electrical and mechanical sizing, ensuring that components are properly sized and integrated.
• Work with electrical and control engineers on prototyping and troubleshooting systems.
• Assist in designing mechanical parts such as chassis and brackets.
• Manage the procurement of components.
• Create documentation, including design specs, test cases, system requirements, and user manuals.
• Work with technicians during integration and testing, and help resolve technical issues.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• Entry level candidate are welcome to apply.
• Knowledge and proficiency in system integration, control theory, motors, sensors, and mechanical systems.
• Familiar with CAD and troubleshooting of electrical and mechanical systems.
• Good problem-solving skills and the ability to manage multiple tasks and deadlines.
• Team player with strong communication skills, eager to learn and work in new technology areas.
• Experience building and testing robotics/control systems would be advantageous.
• Experience and/or understanding with communication interfaces like RS232, RS485, and CAN would be advantageous
• Experience and/or understanding of vehicle systems such as drivelines, steering and brakes would be advantageous.

The research and development engineer will focus on scaling up and optimizing the solution-based perovskite solar module fabrication.

Key Responsibilities are listed as following:

• Material Development: Formulate and optimize perovskite precursor solutions to achieve high-performance thin films with excellent uniformity, crystallinity, and stability.
• Process Optimization: Develop and refine large area solution-based deposition techniques such as slot-die coating, inkjet printing, and blade coating for scalable production.
• Device Fabrication: Design and fabricate perovskite solar cells, including single-junction and tandem architectures, using solution-based processes.
• Characterization: Perform advanced characterization of solution-processed materials and devices, including optical, electrical, and structural analysis using techniques like UV-Vis spectroscopy, SEM, XRD, PL, and IV testing.
• Stability and Reliability: Investigate degradation mechanisms of solution-processed perovskite layers and develop strategies for improving device stability and reliability under operational conditions.
• Innovation: Explore new solvents, additives, and processing conditions to enhance performance and scalability of solution-based perovskite materials.
• Collaboration: Work closely with cross-functional teams, including material scientists, device engineers, and manufacturing teams, to align research outcomes with production goals.
• Documentation and Reporting: Maintain detailed records of experiments, analyze results, and prepare technical reports, presentations, and publications.

Qualifications:

· Bachelor or Master’s in Materials Science, Chemistry, Chemical Engineering, Physics, or a related field.

· Demonstrated expertise in solution-based perovskite synthesis, thin-film deposition, and device fabrication.

· Experience with solution processing techniques, such as spin coating, slot-die coating, or inkjet printing.

· Experience with drying processing techniques, air-knifing, VCD and oven annealing.

· Proficiency in materials and device characterization techniques, including SEM, XRD, UV-Vis, and IV measurement.

· Strong understanding of perovskite chemistry and degradation mechanisms.

· Excellent analytical, problem-solving, and critical-thinking skills.

· Ability to work independently and collaboratively in a fast-paced research environment.

Preferred Skills:

• Familiarity with large-area coating processes for scalable production.
• Experience in tandem solar cells or integration with other photovoltaic technologies.
• Knowledge of industrial-scale solution processing methods like roll-to-roll fabrication.
• Proficiency in simulation tools for solar cell design and analysis.

Project: HDB at Yishun (BTO)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in March 2025.

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 3 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description:

• Perform global structural analysis with all major connection detail ULS/ALS.
• Perform global fatigue analysis with all major connection detail FLS.
• Perform complete structural analysis reports for all main structure foundation, support, lifting, sea fastening, load out, dry & wet tow up to classification society approval level.
• Able to perform steel beam design such as ULS bending, shear, bucking verification and SLS deflection verification using the beam section properties.
• Perform mesh load transfer for structural analysis.
• Perform structural design specification.
• Perform main scantling and steel weight calculation.
• Perform structural construction standard in detail engineering.
• Perform Collision analysis.
• Design and perform all kind of major structural connection detail and analysis.
• Coordinate with classification societies for design and analysis approvals.
• Design and drafting of all structural drawings such as hull lines plan, structural category plan, deck loading plan, full penetration welding plan, scantling drawings, major connection scantlings etc. (Optional)

Requirements:

• Academic qualification in Marine/Ocean Engineering or Civil Engineering
• Minimum 8 years of relevant working experience in the whole process of concept/basic design/detail engineering of semi-submersible substructure/floater design in Floating Offshore Wind Turbine (FOWT) or offshore rig industry.
• Proficient in software packages in SESAM Genie, SACS, Python and AutoCAD
• Good knowledge of all regulations such as DNV, ABS, BV, IEC etc.

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Responsibilities:

• Oversee wafer manufacturing to meet quality, yield, and production targets.
• Collaborate globally on process alignment and qualification of new processes, suppliers, and consumables.
• Work with cross-functional teams to enhance process capability and yield.
• Coordinate troubleshooting for process issues and yield losses.
• Drive continuous process improvements and resolve chronic quality issues.
• Develop best practices and innovative solutions for ongoing improvement.
• Conduct statistical data analysis for process improvement and data interpretation.
• Utilize problem-solving techniques (8D, Fishbone, DOE) and risk assessment tools (FMEA).

Requirements:

• Degree in Engineering or equivalent.
• Knowledge of quality management systems, data analysis, DOE, and SPC
• Proficient in statistical software (e.g., JMP).
• Experience with Visual Basic, databases, and queries (preferred).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Senior Mechanical Engineer requirements:

- The project is a Power Plant at Jurong Island

- Familiar with Singapore's local technical standards, and acceptance process.

- Under the age of 35.

- Speak English

- Good health and strong safety awareness, good at communication

- Obey the Mechanical department management

- Have a qualified and valid skill certificate

- At least 5 years of mechanical work experience in Singapore, preferably as a mechanical engineer at the construction site of a Chinese company.

- Able to read Mechanical Installation drawings and guide site construction work drawings.

- Have a strong sense of responsibility, can take the initiative to work, reasonable planning, comprehensive consideration of work tasks

- Can communicate with owners, subcontractors, and other departments for permits and other works

- Able to start work on short notice will be an advantage

- Mechanical engineer with working experience in gas turbine power plant is preferred

- Adapt to our company's working hours

- Subcontractor management experience is preferred, have subcontractor management ideas

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

We are looking for Data Analyst/Engineer to join a fast growing IT company!

• Exciting opportunity to work with a team of professional to deliver high quality applications
• Permanent position, positive working environment
• Salary up to $7,000 + AWS + bonus

Responsibilities:

• Develop, construct, test and maintain data architectures such as databases, data warehouses and large-scale data processing systems
• Design and develop data pipelines/systems for data modelling, mining and production
• Ensure the data architecture is in place to support routine and ad-hoc requirements of data analytics team, stakeholders and the business
• Leverage on variety of programming languages and data crawling/processing tools to make raw data clean and highly available for use in descriptive and predictive modelling
• Recommend and implement ways to improve data quality, reliability, flexibility and efficiency
• Ensure data assets and data catalogs are organized and stored in an efficient way so that information is easy to access and retrieve
• PL/SQL and SQL Tuning and optimization of newly develop and existing applications

Requirements:

• At least 3 years' working experience in data architecture, data warehousing, data processing, data modelling and ETL/ELT, familiarity with real-time streaming solutions.
• Working experience in Kubernetes-based DevOps practices such as container orchestration, CI/CD pipelines, and microservices deployment.
• Working experience in database development (Oracle SQL/PLSQL) and familiar with AWS cloud environment

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138
ScienTec Consulting Pte Ltd – 11C5781

Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

We are looking for a Software Test Engineer experienced in manual testing.

• Gain exposure to large scale government projects.
• Salary package up to $6,200.
• Hybrid work arrangement.

Responsibilities:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas
• Work closely with development team to conduct testing of modules developed for application/ system integration and enhancements.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.

Requirements:

• Degree in Computer / Computer Science, Electronics and Computer Engineering, Information Technology or equivalent.
• Minimum least 3 years of quality assurance/testing experience.
• Experience in Agile development and testing methodologies.
• Testing certifications is an advantage (eg. CSTP, CTAL).

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J52276 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781