What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

(a) Checking the logs of the network equipment and network links every morning to ensure no abnormal activities;

(b) Install, maintain and upgrade all hardware, firmware and software used;

(c) Apply software and security patches as prescribed in Part 2C Patch Management Requirements;

(d) Fine-tune the network or system parameters;

(e) Patch/Re-Patch cables in patch panels, network points and all network equipment;

(f) Labelling of cables, patch panels, racks and equipment;

(g) Create, delete or modify access rights for the network equipment related user accounts in terms of authentication, authorisation and accounting;

(h) Connect Customer-approved network equipment to the Customer’s network;

(i) Manage IP addresses and IP assignment scheme;

(j) Manage firewall rules setting and security configuration e.g. add, delete or modify firewall rules, change encryption keys;

(k) Perform troubleshooting to resolve network issues;

(l) Manage incidents as specified in Part 2D Service Management Requirements;

(m) Document and maintain configurations of all network hardware, cabling information and software used in the operating environment;

(n) Perform routine backup of network configuration for network equipment including firewall rules;

(o) Perform NAC ClearPass administration for security posture check enforcement which minimally includes the following tasks:

(p) Analyse network utilization pattern and problems, recommend and implement corrective and preventive measures;

(q) Recommend new or improved hardware, software, configurations, etc. to enhance the existing system performance and management;

(r) Assist the Customer to evaluate new hardware and software for implementation in the operating environment, when required by the Customer;

(s) Enforce physical access controls to the network room and the equipment, including escorting its own Sub-Vendors and the Customer-appointed Supplier, and maintaining proper management of keys and access logs at all times; and

(t) Provide standby and support service for network upgrades, network implementation or building maintenance activities such as testing and servicing of building power generators, Uninterruptible Power Supply (UPS), air-conditioning and fire suppression systems, which may affect the

operation of the equipment in the network rooms.

Requirements-

· Network technologies and protocols;

· Network configuration;

· Network utilization and performance monitoring;

· Network fine-tuning, incident troubleshooting, interpretation of statistics and traffic pattern;

· Firewall rules configuration and security setting; and

· IDS/IPS, CDN implementation and IPv6;

· Familiar with Cisco and Alcatel and Palo Alto

Network support engineer shall have at least three (3) years of hands-on experience in configuring routers/switches (e.g., Cisco and Alcatel), firewalls, and intrusion detection/protection systems.

The network support engineer shall minimally have the Cisco Certified Network Engineer

certification, or equivalent, and have experience in WAN implementation.

Espressif is looking for both junior and senior Embedded software engineers who will participate in projects related to wireless protocol stacks (Wi-Fi / Bluetooth / 802.15.4) or multimedia solutions (algorithms / protocols / applications of video/audio).

To design and develop Espressif's AIoT Chips, SDKs, and solutions. You will be responsible for:

1. Design and develop wireless protocol stacks such as Wi-Fi / Bluetooth / 15.4 and coexistence among them.

2. Develop multimedia algorithms such as H264, JPEG, and audio codecs; Develop multimedia protocols such as DLNA, and VOIP; Develop other components used in Multimedia SDK.

3. Design and implement embedded multimedia solutions based on Wi-Fi/Bluetooth Chips and SDKs, such as voice-controlled loudspeakers and IOT devices.

4. By analyzing, positioning, and solving customer problems, better assist customers in completing product and project development.

Job Requirements:

1. Bachelor’s degree or above, majoring in Computer, Electronic Engineering, Communication, Automation, and other related majors.

2. Proficiency in C/C++ language.

3. Familiar with at least one scripting language, Python is preferred.

4. Familiar with FreeRTOS or another RTOS.

5. Minimum 2-3 years working experience

6. Knowledge of hardware communication protocols: SPI, UART, I2C, I2S.

7. Keen interest in the development of single-chip microcomputers and protocol stacks, experience in complete embedded-related projects or embedded-related competitions is a plus.

8. Have a solid technical foundation for embedded software development, experience in ESP8266 / ESP32 development is preferred.

Who We Are

We are an Artificial Intelligence (AI) venture backed by Shell, a multinational energy major, dedicated to tackling the most complex issues in the energy sector through groundbreaking research and development in AI and Data Science. Founded in Singapore, our ultimate goal is to establish ourselves as the leading hub for AI and Data Science R&D in Southeast Asia.

We are looking for a Software Engineer to join our dynamic team. As a Software Engineer, you will work on designing, developing, and improving key components of the technology stack related to AI, data engineering, high-performance computing (HPC), and geophysics, among other specialized topics We are looking for people from various development backgrounds but most importantly for someone who is passionate about solving challenging problems and can think out of the box.

Responsibilities

• Design, develop, and improve key components of the technology stack in high-paced, high-impact real-world projects.
• Apply the technology to real work and high-impact client projects.
• Maintain high code quality standards and be accountable for the work delivered.

Requirements

• Bachelor's or Master's degree in Computing, Science, or Engineering with 2 years of software development experience.
• High proficiency in Python is a must. Experience in C, C++, Rust, or other programming languages is a plus.
• Good aptitude for abstract thinking and problem-solving. Good understanding of complex algorithms and data structures.
• Experience is required with essential development tools such as git, Linux Shell Scripting, vim/emacs, etc.
• Experience with parallel computing, system programming, full-stack development, and web development can be a plus.
• Ability to work effectively in a fast-paced environment with high expectations.

Benefits

Why Join LRD?

LRD offers a conducive work environment in a company culture that values authenticity, integrity, technical skills, teamwork, and results. Here are some of the opportunities offered by the position:

• You are always presented with new challenges to solve intellectually stimulating problems. The work never gets stale, mundane, or boring.
• Continuous learning opportunities to develop your technical expertise in many subfields of AI, ML, HPC, Geoscience, Engineering, etc.
• Your work will have an immediate impact on high-impact real-world problems such as natural resource exploration and energy security.
• Have your work recognized with publication opportunities in top scientific conferences and journals.
• Be rewarded for your contributions with high-performance bonuses well above the market rate.
• Friendly and casual working environment.

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Join the Institute of Microelectronics (IME) to be immersed in cutting-edge semiconductor research. As a research institute within the Agency for Science, Technology and Research (A*STAR), IME bridges the gap between academia and industry. Our mission is to accelerate innovation in advanced packaging, piezoMEMS, SiC, RF/mmWave GaN, and photonics & sensors, and to develop talent and inspire in Singapore.

We are looking for a passionate individual to join our Technology-Business Development department. You will be responsible for sales and marketing, account management and industry development. If you're excited about the future of microelectronics and wish to contribute to the development of Singapore's innovation engine for microelectronics, we want you on our team!

Job Responsibilities

• Perform market intelligence, develop and execute go-to-market plans for commercialization of IME's research capabilities.
• Lead industry and customer engagements, understand their needs and work with Technology Development teams to formulate value propositions.
• Structure, review and negotiate contracts with industry partners and customers.
• Develop industry network, manage accounts and build relationships to win and retain industry partners and customers.

Job Requirements:

• Degree in Science or Engineering.
• Ability to think on the feet
• Result-oriented, analytical, proactive, resourceful and team player
• Good communication, presentation and interpersonal skills
• Resilience and adaptability to work in a fast-paced and fast-changing environment
• Passion to develop Singapore's semiconductor industry

Join the Institute of Microelectronics (IME) to be immersed in cutting-edge semiconductor research. As a research institute within the Agency for Science, Technology and Research (A*STAR), IME bridges the gap between academia and industry. Our mission is to accelerate innovation in advanced packaging, piezoMEMS, SiC, RF/mmWave GaN, and photonics & sensors, and to develop talent and inspire in Singapore.

We are looking for a passionate individual to join our Technology-Business Development department. You will be responsible for sales and marketing, account management and industry development. If you're excited about the future of microelectronics and wish to contribute to the development of Singapore's innovation engine for microelectronics, we want you on our team!

Job Responsibilities

• Perform market intelligence, develop and execute go-to-market plans for commercialization of IME's research capabilities.
• Lead industry and customer engagements, understand their needs and work with Technology Development teams to formulate value propositions.
• Structure, review and negotiate contracts with industry partners and customers.
• Develop industry network, manage accounts and build relationships to win and retain industry partners and customers.

Job Requirements:

• Degree in Science or Engineering.
• Ability to think on the feet
• Result-oriented, analytical, proactive, resourceful and team player
• Good communication, presentation and interpersonal skills
• Resilience and adaptability to work in a fast-paced and fast-changing environment
• Passion to develop Singapore's semiconductor industry

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Support Interactive Panel Set up
• Any other task assign by Superior

ABOUT AirLab

The Aviation Innovation Research (AIR) Lab

The joint CAAS-Thales innovation lab known as ‘AIR Lab’ started to operate on 1st November 2019 with the objective to develop Proof of Concepts (POCs) or Minimum Viable Products (MVPs) of advanced and open technologies for future Air Traffic Management (ATM). Currently, the joint lab employs a team of 40 Thales engineers and 12 CAAS engineers and air traffic controllers operating in a vibrant ecosystem involving several Singaporean SMEs and start-ups, as well as key research institutes.

Thales engineers include 10 domain experts – with more than 10 years of experience – coming from Thales ATM centers of competence in France and Australia. These experts are coaching both the local Thales and CAAS engineers.

ROLE DESCRIPTION SUMMARY

As a Backend Software Engineer at AIR Lab, you will thrive if you have a passion for coding, designing, and engaging in discussions about APIs and data processing, including areas like data modeling, stream processing, and data quality control. You take pride in both the quality of your technical implementations and the overall delivery. You enjoy collaborating with a diverse team, bringing together various ethnic and cultural perspectives.

You are eager to dive deep into technical challenges, identify solutions, and effectively communicate your findings, helping the team learn and grow. You are enthusiastic about exploring new technologies and finding innovative ways to apply your knowledge. You also inspire and motivate your teammates to embrace continuous learning and take an active role in all aspects of engineering activities at AIR Lab.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSoftware Backend Engineer, you are accountable for:

• Design and build APIs to provide data for the stream-aligned squads.

• Implement features and associated automated unit and integration tests. If appropriate implement security and load tests.

• Improve and maintain the DataLake cybersecurity posture w.r.t data governance and cybersecurity standards by working with other stakeholders (e.g., Data Architect, Data Assessment Office, Cybersecurity Office).

• Improve and maintain the DataLake service levels for reliable data flow, health of infrastructure (i.e., compute and storage) and security.

• Improve and maintain the total cost of ownership of data; this activity includes raising efficiencies around FinOps, CloudOps.

• Improve and maintain the architecture transforming data between the DataLake and a distributed search and analytics engine (e.g., ElasticSearch).

• Lead the technical evolution of the DataLake by exploring new methods, techniques, algorithms (e.g., data meshes, AI/MLOps infrastructure).

• Work with the Data Architect to effect best practices to the engineering organization.

• Write and review the necessary technical and functional documentation in documentation repositories (e.g., backstage.io, JIRA, READMEs).

• Work in an agile, cross-functional multinational team, actively supporting the team's success.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Education

- Bachelor's degree in Computer Science or Information Technology with a minimum of 3 years of working experience.

- Master's degree in Computer Science or Data Science, if applicable

- Mid-career switchers are encouraged to apply if you demonstrate relevant working experience of at least 3 years.

Essential Skills/Experience

• Working knowledge of designing and building software applications using Java and/or Kotlin as a main programming language; a bonus is if you have experience designing and deploying RESTful and/or GraphQL APIs

• Familiar with development and deployment technologies for cloud (e.g., Azure Cloud, AWS, GCP), Kubernetes and container workloads (e.g., Kaniko, Docker) in general.

• Proficient in designing and implementing data processing and business Logic

• Demonstrated application of working with Continuous Integration and/or Continuous Delivery models; you are expected to be familiar with using Linux (e.g., shell commands)

• Proficiency in distributed source code management tools like GitLab, Github and practice GitOps

• Effective communication skills in English

Desirable Skills/Experience

• Working knowledge of designing application with a “shift-left” cybersecurity approach.

• Working knowledge of other languages (e.g., Python3, Scala2 or Scala3, Go, TypeScript, C, C++17, Java17)

• Experience in designing ETL or event-driven processing pipelines (with structured or unstructured data) using frameworks like Spark/ Apache Beam, Kafka Streams, Flink; proficient in deploying these data pipelines into Kubernetes cluster in Azure cloud either as virtual machines or containerized workloads.

• Familiar with cloud deployment models (e.g., public, private, community and hybrid) and service models (Software as a Service, Platform as a Service and Infrastructure as a Service).

• Familiar with designing and/or implementing AI/MLOps pipelines in public cloud (e.g., Azure, AWS, GCP)

Essential / Desirable Traits

• Possess learning agility, flexibility and pro-activity

• Comfortable with agile teamwork and user engagement

YOUR CAREER AT THALES

Future opportunities will allow you to discover other domains or sites. You will be able to evolve and grow your competencies in different areas:

• Room and attention to personal development

• Build your talents in another domain of Thales Group, discovering new products, new customers, new country or go to a more complex Solution.

• Choose between a technical expertise or a leadership path

• Build an international career within a leading Engineering Group

Roles & Responsibilities :

• Assists the Project Manager in supervision of all civil and structural works at Project Site.
• Ensure works carried out by subcontractors are in accordance with specifications and drawings.
• Ensure work programme, quality requirement, standards and construction materials requirements are carried out.
• Coordinate all civil & structural works with the consultants, sub-contractors, C&S and M&E coordinators to resolve any technical issues.
• Attend safety meetings and ensure works are carried-out safely on site.
• Any ad-hoc duties instructed.

Requirements:

• Bachelor's Degree in Civil Engineering or equivalent.
• Knowledge in the use of BIM, AutoCad and other relevant softwares.
• Able to read and understand construction drawings.
• Highly motivated, meticulous, independent with good written and verbal communication skills.
• At least 8-10 years of local experience.

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives
• Responsible for management, advanced configuration, monitoring and fine tuning of Data Loss Prevention solution
• Configure, develop and maintain DLP tools & platform, SIEM and threat detection tools
• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 8 years of experience in IT Incident Management, DLP Operations or SOC
• Experience in multiple channels of DLP implementation and operations
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

About the Team:

Our team builds the recommender system at Shopee, and strives to provide the best online shopping experience for our users. You will have the opportunity to participate in designing and implementing advanced technical solutions with high performance, availability and scalability. If you are passionate in technology, then we welcome you to join us to build a high-performing recommender system.

Job Description:

• Design and implement backend services / systems / tools used by our products and users
• Write high-quality, clean and maintainable code using engineering best practices (unit testing, source control, continuous integration, automation, design patterns, etc.)
• Analyse requirements, design and develop features in C++/Go
• Understand and constantly optimise our products, identify and fix problems, improve stability and user experience
• Design and implement distributed systems that are optimised for performance, scalability and availability
• Build reusable code and libraries
• Collaborate with fellow developers, product managers,designers, and operation engineers to build products with cutting-edge technologies

Requirements:

• Bachelor's or higher degree in Computer Science or related fields, graduating in 2024
• Passionate about coding and programming, innovation, and solving challenging problems
• In-depth understanding of computer science fundamentals
• Strong and hands-on experience with at least one of the programming languages: C++, Golang
• Familiar with performance tuning, massive concurrency handling, and caching mechanisms
• Familiar with Linux development environments and multi-threaded programming
• Experience and knowledge in dealing with big data (Hadoop/Spark/Flink) is highly preferred

Job Description :

We are looking for a skilled and proactive AV/IT Engineer who can take the lead on AV/IT initiatives and offer expert advice on AV/IT design and project plans, ensuring project needs are met, maintain, and monitor project timelines, intervening when necessary, onsite installation, upgrades, troubleshooting, take ownership and coordinate with others to support daily audio visual technical requests. Supervise and assist in the setup, troubleshooting and maintenance of audio visual systems. Perform preventative maintenance to ensure equipment is ready for use. Identify defective or failed equipment and resolve issues as they arise. Compile and analyze weekly reports, incident reports, and service report submissions, networking, and other in-house projects at customer premises. Programming, and basic construction setups Manage, test, and commission necessary devices. Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Requirements :

*Pass experience with working with Telcos is a must.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

• Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international
• Provide high level technical support to external customers at their location
• Provide on-­site training to the customers
• Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales
• Develop Service technical documentation
• Create, develop, and continuously improve the customer support & applications knowledge database
• Timely and professionally handle field service calls and issues arising from the field service
• Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international
• Visits, triage with field applications scientists as appropriate
• Timely complete and submit all required paperwork
• Flexible schedule to accommodate our customer’s needs
• Effectively handle multiple priorities, organize workload, and meet deadlines
• Communicate with the customer to ensure satisfaction and implement any necessary corrective actions
• Up to 30% traveling required within Southeast Asia (at times with short notice)
• Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

• 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)
• 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

• Pre-sales support
• Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

• Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.
• Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation
• Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.
• AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Interested candidates, please apply via Bruker's career portal directly : https://bit.ly/48OlAj5

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 3 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 3 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.