Automation Engineer

• Singapore Based (Changi)
• 5 Days work per week (9am to 6pm (may need go back office if need any support))
• $3500 to $5000
• Diploma / Degree in an engineering discipline + Minimum 3 years of experience in manufacturing industries with an automation background.
• Required hands-on experience and remote support + Need strong foundation in Siemens PLC and / or Fanuc robotics.
• A proven record of accomplishment in automation work will be advantageous.
• Career Progression Opportunities

Key Responsibilities:

General Equipment

• Identifies or addresses malfunctions of plant operational equipment. Proactively involved in identifying the defects in the operational equipment and finding out ways in which can be rectified.
• Monitors plant equipment operation and performance, adjusting to performance specifications.
• Communicates the status of operating equipment to production supervisors or managers.
• Maintain logs and reports. work requests, or other records of work performed in the plant.
• propose improvements to prevent the re-occurrence of trouble, and target set not more than 3 times similar incidents.
• Coordinate with all contractors/supplies for in-house periodic maintenance including plant facilities and repairs.

PLC & Software

• Able to read and write Siemens S7 PLC & HMI codes.
• Knowledge of serial communication.
• Knowledge of programming languages

Other Operational Duties

• Maintain proper documentation
• Housekeeping of spare parts, tools, and accessories.
• Initiate and participate in continuous improvement projects
• As assigned by Managers.

Competencies

• Electrical design and drawing.
• Install, calibrate, program modification, operate, and simulate the industrial Robot such as FANUS using Siemens S7 PLC, and HMI.
• Work with Suppliers and Vendors to determine the selection of proper components.
• Perform installations/commissioning of machine/robot.

Travel:

• Travel for this position is up to 30%.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

No experience/Diploma in mechanical/mechatronic/electrical/electronic or related engineering

MOE Grant can apply

SPM can apply

Basic (no experiene / fresh)-start from $2400-$3300

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Mission statement

Project name : CREdit Workflow (CREW)

Context of the project: A new application is developed in Counterparty and Credit Risk IT (RIT): CREW. This tool handles workflow and definition of credit granting concerning the counterparty risk. It includes a decision-making workflow and the process of the credit decision through authorizations.

Goal of the project :Leveraging on the testing automation framework created to develop complex scenarios for a workflow application and strengthen the non-regression testing.

Internship mission statement: This mission will allow the intern to work on the automation of business’ use cases of front office users to ensure the stability of the tool throughout the development cycle, in close collaboration with the solution developers and business analysts. The tool development will have to follow the full CI-CD pipeline (unit tests, Sonar check …) process. Playwright, which is an increasingly adopted automation solution in the industry, requires basic understanding of programming languages (e.g., Python, Java, or JavaScript) and object-oriented concepts.

The benefit for the domain will be a robust CI/CD with a strong quality gate alerting on regression and reducing the validation phases.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand team dynamics
• Responsible of user stories development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Experience in back-end development using: NET, .NET Core, C#
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Please apply via link:

https://app.jobvite.com/j?cj=oq2Nufwt&s=URL

Responsibilities:

• Responding to and resolving Customer and internal stakeholder technical requests concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of product technical knowledge, mechanical know-how of system components, and analytical skills while adhering to sound engineering principles, standards, practices and procedures.
• Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.
• Proactively identifying potential failures, assessing and controlling operational risks on the Power Train with support from the 24/7 remote monitoring hub and expert support
• Proactively advising and assisting the Customer in planning, coordination with MPW for the execution of relevant inspection and maintenance activities.
• Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance against the contractual guarantees and obligations. If necessary, recommend corrective actions.
• Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.
• Reviewing and presenting the inspection findings and outage reports to the Customer.

Requirements:

• Previous site work experience in Long Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or industrial plants rotating equipment is preferable
• Previous customer facing experience where there is regular interaction with plant personnel to provide troubleshooting support and to resolve problems
• Technical knowledge in GTCC operations and maintenance

HOW TO APPLY:

Interested applicants, please send your latest resume to vivian(at)trustrecruit.com.sg or click on “Apply Now” and provide the below details in your resume.

• Current salary (breakdown)
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the

Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Vivian Chung Fhui Tiin

EA Personnel Reg No: R22106436

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

[Order ID: 478461]

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.
• Any other ad-hoc duties assigned.

Requirements:

• 5 years’ experience in a managerial capacity overseeing software development and automation control in Semiconductor industry.
• Experienced in programming on Windows (XP and above) environment.
• Highly versatile in VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Please include the following for us to conduct an effective job matching for you:

• Earliest availability date/ notice period
• Expected & Last drawn salary

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Victoria Loh Jie Li
EA Personnel Reg. No.: R1330197
EA Licence No.: 07C5771

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Benefits:

• Basic Salary up to $4,000 with yearly increment based on performance.
• 5.5 days work week | Monday to Friday – 8am to 5pm, Saturday – 8am to 12pm
• Our company emphasises on good career progression

Job Description:

This is a full time role for a Project Engineer located in King George's Ave. Our client is a construction industry and you will be responsible to report to the project manager and ensure that the project plan stays on track to meet deadlines. Key responsibilities include managing the RFI and submittal process, preparing and submitting monthly progress claims, and attending on-site meetings as needed. Additionally, this role involves overseeing project progress and providing regular updates to management.

Qualifications:

• Preferably bachelor’s degree in mechanical or electrical engineering or equivalent experience
• Polytechnic diploma
• Min 1 year of experience as project engineer

Responsibilities:

• Supervision of Electrical Equipment testing and commissioning at site
• Review and submission of site acceptance test reports.
• Review Single Line Diagrams and Electrical Schematic Drawings.
• Assist in Electrical Equipment Installation Inspections.
• Attend Site Activities and Meetings involving clients and contractors.
• Undertake tasks / assignments as and when directed by the Commissioning Lead.

Requirements:

• Diploma/Degree in Electrical/ Mechatronic Engineering.
• Minimum 2 Years in the related field and understand singapore regulatory
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Utilities Engineer (Tuas/1 Year Contract/ Up to $8000)

The Utilities Engineer will be responsible for ensuring the facility, equipment and systems are maintained in accordance with the detailed design and that GMP qualification is achieved and complied. The engineer will be the Subject Matter Expert (SME) for the Utilities system operations, maintenance and provide technical/expertise to ensure readiness for routine operations.

The engineer shall ensure adherence to standards and good engineering practices. This includes ensuring the design meets the requirements of Manufacturing, Quality, Information Systems, and Engineering groups. Support development of commissioning and qualification documents to ensure the utilities system is qualified per regulatory requirement. The engineer will have to also be able to independently resolve technical issues, escalate problems, work in teams, and promote sharing of lessons learned.

Responsibilities:

Operational Excellence, continuous improvement and day to day operations

· Lead/ Support continuous improvement for Utilities system operations, maintenance and reliability program.

· Establish metrics that ensure optimal utility operational performance.

· Lead/ Support system owner in Utility Projects - review of Engineering design documentation and associated engineering drawings.

· Lead/ Support Site Acceptance Test (SAT) and commissioning and testing of System to meet the User Specification Requirements (URS).

· Participate in system walk down to ensure reliable operations of utility systems.

Safety and Quality Compliance Management

· Lead/ Support in Audit readiness for regulatory inspections to ensure compliance to all relevant site SOPs, global SOPs, GEP and GDP.

· Provide support to the development, revision, review, and approval of Standard Operating Procedures, Risk Assessment, Preventive maintenance program and Job Plans.

· Lead/ Support deviation investigation and ensure Corrective and Preventive Action (CAPA) is in place to prevent recurrence of similar incident.

· Lead/ Support Change control or change evaluation initiatives for continuous improvement to enable better system reliability and operations.

· Actively practice Company's Safety Culture

Sustainability

· Lead/ Support Site Sustainability program - Analyze Energy consumption data, benchmark the overall usage/consumption, and evaluate opportunities to optimize its usage.

· Lead/ Support the development of business case to drive the site goal on sustainability targets.

· Generate utilities consumption data for authority submissions.

Basic Qualifications

· Diploma/Degree in Engineering, Mechanical, Electrical, Chemical

· Ability to work independently and collaboratively

· Good interpersonal and communication skills with high computer literacy

· Strong team player, able to effectively work within and across teams

Preferred Qualifications

· Fluency in communications skills, both oral and written, including presentation skills

· Familiar with documentation in a highly regulated environment

· Interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met

· Ability to tactfully negotiate and positively influence peers

· Strong analytical skills to identify potential improvement opportunities

EA License No. 01C4394 • RCB No. 200007268E •EA Registration No. R22109454 Malcolm Lee Jun Hao

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand team dynamics
• Responsible of a user story development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Java, SQL, and code quality skills.
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Pleaes apply via link:

https://app.jobvite.com/j?cj=otFNufw9&s=URL

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Suppor current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time
• studies

Interested applicants, please send your resume to [email protected]

Location: East

Job Scope:

• Follow the Project Management Process from award until handover including all statutory requirements and deliverables
• Develop comprehensive project plan for multiple projects
• Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project to ensure project progresses on schedule and within budget.
• Coordinate and be involved in pre-& post tender survey for SED/ ordering and pre-con survey on the existing building (applicable to MOD projects only).
• Sell variation orders timely to reach financial objectives.
• Provide regular project management reports for management during Work in progress (WIP) review.
• Directs and coordinates activities of project team which includes attend site meeting, involve in all internal and external inspection / handover of projects for public use with no critical defects and place order for spare parts via spare parts finder database.
• Attend monthly Work in Progress (WIP) meeting with Commercial and EI Finance Controller.
• Coordinate daily activities and resolve technical problems internally with factory, Sales Engineering Department, Drawing Office and externally with our suppliers and contractors.
• Manage cost and pre-empt / highlight potential cost overrun and late delivery of project.
• Ensure compliance to Organizational Norms, policies, procedures and requirements of the process and quality hold points defined in the work instructions of the Top Range Excellence / Fulfilment Plus process.
• Sign off as defined in ON 17100 for major projects, execute all contractual terms to continuously protecting financial entitlements.
• Demonstrate safety leadership, conduct periodically quality walks, safety walks and safety inspections.
• Responsible for the employee and subcontractor safety compliance at project sites and conducting safety walks on regular basis

Job Requirements:

• Min. Degree in mechnical/electrical engineer or any relevant field
• No experience required as training will be provided
• Able to start immediate or within a short notice preferred

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Salary -

CNC Experience - ($4,000 - $4,500) + transport allowance

No Experience - ($3,800 - $4,000) + transport allowance

Mon - Fri, 8am - 5:15pm

Job Description:

● To repair & service CNC machines in the region

● To implement service programmes for customer service

● Machine Installation

● Documentation (Service report, Machine registration, filing and record)

Job Requirements:

● Minimum Diploma in Electrical / Mechanical / Mechatronics Engineering

● Possess valid Class 3 driving license

● Minimum 2 years experience in servicing CNC Turning or/and Milling Machines

● Singaporeans only

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Senior Process Engineer [Oil & Gas | EPC Industry]

• Basic: $5,500 - $6,900 (Depends on EXP)
• Working Hours: 5 Days
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected]

About Our Client:
We are representing a globally recognized EPC contractor in the Oil & Gas and Petrochemical sector. Renowned for their commitment to engineering innovation and excellence, our client is dedicated to delivering impactful projects that shape the future of the energy industry. They provide a stimulating environment that encourages creativity and rewards dedication, allowing team members to grow professionally in a supportive and highly collaborative setting.

Why Join Them?
Step into a role where you’ll work with some of the best minds in the industry, contributing to complex, large-scale projects that push the boundaries of engineering. Our client offers a culture of continuous learning, cutting-edge technology exposure, and a strong commitment to personal and career development. This is your chance to advance your skills and make a meaningful impact in an industry that values technical expertise and innovative solutions.

Job Summary:
As a Senior Process Engineer, you’ll be at the forefront of designing and optimizing process systems for major petrochemical facilities. This role involves leading process design, performing complex calculations, and reviewing detailed engineering drawings to meet client and industry standards. You will guide engineering teams through every stage, from feasibility studies to detailed design, ensuring efficient and sustainable solutions for high-profile projects.

Key Responsibilities:

• Spearhead process design efforts for major projects, covering feasibility studies, FEED, and detailed engineering.
• Lead tendering and project execution for EPC/EPCm ventures.
• Develop essential deliverables such as specifications, PFDs, P&IDs, and operating manuals.
• Conduct simulations and calculations to optimize project outcomes.
• Design critical industrial components, including reactors, heat exchangers, and compressors.
• Oversee design reviews, HAZOP, IPF, SIL assessments, and 3D model evaluations.
• Provide on-site support during construction and commissioning phases.
• Manage project schedules, manhours, and liaise effectively with clients and internal teams.

Requirements:

• Bachelor’s degree in Chemical Engineering.
• At least 10 years of experience in process engineering, with a preference for the Oil & Gas or Petrochemical sector.

Skills:

• Proficiency in simulation tools like PRO/II, HYSYS, and HTRI.
• Strong leadership abilities and analytical skills, with a talent for interpreting technical data.
• Excellent communication skills, with a keen eye for technical detail.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

About Capgemini

Capgemini is a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, cloud and data, combined with its deep industry expertise and partner ecosystem. The Group reported 2023 global revenues of €22.5 billion.

Job Description:

You will be responsible for developing, implementing and maintaining IT applications systems as well as software development. You understand Agile principles, DevSecOps, Microservices and Cloud-based technologies and you will be part of the team to identify and explore suitable technologies and solutions, as well as implementing IT application architectures to meet organisational needs.

What we are looking for:

• Tertiary Qualification in IT, Computer Science, Engineering or related discipline
• Attention to detail with strong analytical, conceptualisation and problem-solving skills
• Ability to work collaboratively in a cross-functional team. Customer-oriented with the ability to understand business needs.
• Good knowledge of applications/system architecture/ developments and implementation
• Strong communication and presentation skills with the ability to influence different stakeholders

Technology stack used:

• Angular
• Java Spring Boot
• Flask
• MySQL
• AWS Cloud

Let's talk about what's in it for you!

Passionate people are Capgemini's Ace of Spades - join us to discover a career that will challenge, support and inspire you. Working at Capgemini you'll find the rewards are more than just financial. You will work alongside some very smart and inspiring people on exciting projects and you will also enjoy incredible benefits. We offer flexible work practices and 40 hours of self-development every year with a huge selection of learning opportunities to choose from.

As "Architects of Positive Futures", Capgemini actively supports the community in 3 ways:

Diversity and Inclusion - we believe diversity of thought fuels excellence and innovation, which is why we positively encourage applications from suitably qualified candidates regardless of their gender identity, ethnicity, sexual orientation, religion, ability, intersex status or age. To support our commitment to diversity and inclusion, we celebrate special events and days of significance that are important to our employees such as Diwali, Bastille Day, Pride, IDAHOBIT, IWD and International day of people with Disabilities. Our Employee Resource Groups Women@Capgemini and OutFront support the grassroots passion of employees to drive our diversity agenda and effect change.

Digital inclusion - at Capgemini we are using our skills to drive social impact initiatives focusing on helping society address the impact of the digital and automation revolution. We also provide employees with opportunities to give back to the community through charity projects and volunteer days.

Environmental Sustainability - Capgemini joined the CDP's (Carbon Disclosure Project) prestigious "A list" for its commitment to the Net-Zero economy. We are focusing on helping our clients transform towards more sustainable business models and committing to reduce our own carbon emissions (GHG) by 20% per employee by 2020.

Recognized by Ethisphere as one of the World's Most Ethical Companies for the last 8 years in a row, ethics and values are at the heart of Capgemini's corporate culture and business. Embedded in our DNA, our seven values - Honesty, Boldness, Trust, Team Spirit, Freedom, Fun and Modesty - have remained the same since company inception in 1967. To see how we bring these values to life, click here to listen to some of our employee’s stories.

Come join us, bring your whole self to work, create new possibilities for you, your customers and your community and help us to be Architects of Positive Futures.

• Provide support to set up IT workstream for Wholesale Banking, Private Wealth Banking products and services such as Loan, Deposits, Treasury, Securities Custody and Execution

• Provide support to create technology roadmap to meet program objectives, work closely with Head Office, regional business sponsors and IT stakeholders

• Support program feasibility study, pros & cons of solutioning options to meet the program timelines and seek consensus from stakeholders.

• Liaise on defining of business & system requirement plan such as scope definition, schedule, resource allocation, budgeting, implementation plan and quality assurance processes

• Review the application architecture and infrastructure designs

• Work with wider stakeholders to explore technical solutions to achieve business objectives and requirements.

• Provide support to drive the implementation of regional technology programs to meet strategic or tactical objectives, always looking for standardization opportunities. Develop understanding of various banking systems such as at Japan Head Office, regional and country local systems to provide solutions for specific project and lead such initiatives.

• Provide support to drive the implementation of regional technology programs to meet strategic or tactical objectives and focusing on standardization opportunities.

• Support the establishing and implementing of project management practices, templates, policies, tools to expand and mature the Program and Project Management capabilities of the IT APAC organization.

• Participate in key regional meetings and provide updates and align for programs and projects.

• Support program risk assessment to mitigate potential issues and track status and progress.

Responsibilities

• Understand user requirements and perform system analysis, design and document functional and system specifications.
• Design, develop, troubleshoot, test, document, and deploy new solutions quickly and reliably.
• Build the frontend and backend software, build business logics and APIs in the back-end to connect all systems and components together.
• Ensure the delivered applications follow security best practices and comply to enterprise security standards.
• Maintain and improve existing web applications
• Involve in both frontend and backend development
• Any other Ad Hoc duties as assigned

Job Requirements

• Degree/Diploma in software engineering or computer science or any related disciple
• Minimum of 1 -2 years of development experience with Java, J2EE, Springboot and Hibernate.
• Familiar with Object Oriented Design and Analysis, Design Pattern and UML
• Proactive, motivated and team player

Interested applicants, please Email , and look for

Jensen Fang Lifa

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R2197080

We regret that only shortlisted candidates will be contacted.

Position Description

The team supports windows Servers - physical and virtual machines covering all Lines of business enterprise wide. The job requires server build, configuration and support tasks, including troubleshooting and configuration of the technical environment, monitor and manage server performance and health. Working in shifts to cover production support, ensure infrastructure stability and escalations from core infrastructure teams. Responding to critical incident escalations and outages. This role exposes candidate to hardcore technical and troubleshooting skills, working with OEM vendors such as Microsoft, HP, etc.

Key Responsibilities

• Building and configuring servers as per the design document and complete post build tasks and checks.
• Resolving incidents impacting hosts or environment
• Assist with troubleshooting & configuration of the technical environment. Escalating and liaising with additional internal/external groups when required, resulting in satisfactory resolution
• Assist with planned events for VM migration.
• Monitor system performance, availability, and capacity. Respond promptly to notification of potential service issues; Manage and monitors server performance, health and server configuration standards
• Investigating & troubleshooting root causes via problem management
• Responding to L1 and L2 escalations
• Creating, reviewing, maintaining and updating documentation
• Planning and managing infrastructure for planned releases and business Continuity and practices.

Key Requirements

• Enterprise Server Build/Support experience with Windows Server 2016, 2019 and 2022
• Experience supporting VMware virtual infrastructure. Proficiency with vSphere, vSAN, and other VMware products and platforms
• Strong scripting experience. PowerShell proficiency and experience preferred.
• Strong troubleshooting and problem solving skills
• Ability to write and speak clearly and concisely about technical topics
• Ability to work effectively as part of a team
• Financial / Banking company experience preferred.

• Provide support to set up IT workstream for Wholesale Banking, Private Wealth Banking products and services such as Loan, Deposits, Treasury, Securities Custody and Execution

• Provide support to create technology roadmap to meet program objectives, work closely with Head Office, regional business sponsors and IT stakeholders

• Support program feasibility study, pros & cons of solutioning options to meet the program timelines and seek consensus from stakeholders.

• Liaise on defining of business & system requirement plan such as scope definition, schedule, resource allocation, budgeting, implementation plan and quality assurance processes

• Review the application architecture and infrastructure designs

• Work with wider stakeholders to explore technical solutions to achieve business objectives and requirements.

• Provide support to drive the implementation of regional technology programs to meet strategic or tactical objectives, always looking for standardization opportunities. Develop understanding of various banking systems such as at Japan Head Office, regional and country local systems to provide solutions for specific project and lead such initiatives.

• Provide support to drive the implementation of regional technology programs to meet strategic or tactical objectives and focusing on standardization opportunities.

• Support the establishing and implementing of project management practices, templates, policies, tools to expand and mature the Program and Project Management capabilities of the IT APAC organization.

• Participate in key regional meetings and provide updates and align for programs and projects.

• Support program risk assessment to mitigate potential issues and track status and progress.

Support new and designated applications especially SAP to aligned with business requirements and objectives of users in Singapore, Indonesia, Philippines, Vietnam, and Middle East, ensuring business continuity and process efficiency.

Job Responsibilities:

• Providing support for business application operational issue.
• Work together with cross-functional teams, vendors/business partners to ensure successful implementation.
• Research and explore more Application Technologies, Functionality and availability.
• Coordinate and support User Acceptance Testing (UAT) with business users.
• To participate, coordinate and support for implementation and post-implementation of new requests.
• Provide training to users, as and when needed, using the available training materials and UAT documents. Transfer of knowledge and provide training to users to build additional capacity
• To support for implementation and post-implementation of new requests of existing application redevelopment and new application developments.
• Assist in defining test cases and scenarios based on the requirements. Work with vendors or rest of IT team members to ensure that the product is thoroughly tested and meets the specified criteria.
• Create detailed requirement documentation if needed.
• Identify opportunities for adopting new tools, methodologies, and best practices to enhance IT, business application and BI capabilities.
• Actively participate and support in IT special project related with business application development.

Job Requirements:

• Candidate must possess at least Bachelor’s degree in computer science, Information Technology, or related field.
• At least 1 to 3 Year(s) of working experience in the related field is required for this position.
• SAP Functional module certification is an added advantage.
• Proficiency in requirement gathering techniques, documentation, and modelling tools.
• Familiarity with software development life cycle (SDLC) methodologies.
• Candidates with ERP or manufacturing industry experience would be preferred.
• Strong computer skills (MS Office - Excel)

Experience: 10+ Years

Role: System Engineer

Key Skills: Data Processing, Data Analysis, Shell Script, SQL, NOSQL, System Diagram, Application Architecture, System Integration

Key Responsilbilities:

• Participate in end-to-end projects for system implementation of MLS system

• Engage and collaborate with Architects, Security and Development Lead to ensure solution design complies with enterprise design principles, security and control standards

• Liaise with application teams across group and countries build the enhancements according to the technical solution plan

• Analyse user requirements and convert requirements to design document and other system documentation to capture key design decisions

• Plan technical deliverables, perform design and development works to meet project’s requirements within schedule

• Perform data mapping and process mapping with interfacing applications

• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions

• Create technical documents for the solutions. Compile timely, comprehensive, and accurate documentation as requested

• Test, maintain and recommend software improvements to ensure strong functionality and optimization

• Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

• Partner with Test Management teams to ensure completion of SIT, UAT, performance / load testing and application security testing with quality result

• Liaise with other application teams and business users to prepare test cases and test data prior to testing in UAT and Mock Run environment

• Manage project change request approval windows and deployment schedule

• Facilitate and provide technical and testing support before and after production deployment

• Liaise with other units across IT and Business in the organization

• Manage external vendors for project delivery within schedule

Key Requirements:

Must Have

• At least 8 years of experience / knowledge in Application architecture and System Integration with combination of technologies such as Unix, Linux, Hadoop, Apache, Jboss. Maria database and NoSQL

• At least 8 years of CICD implementation experience from scratch with combination of technologies such GitHub, Gitlab, Bitbucket, Jenkins, Aldon, etc

• At least 8 years of network and security experience to resolve firewall connection issue, integration issue, implementing load balancing and disaster recovery needs

• At least 10 years of experience in developing Unix Shell Scripting, SQL, Java and Python from scratch

• At least 10 years of experience in application and database design and UI/UX design

• At least 8 years of experience in business analysis, data mapping and process mapping

• At least 8 years of experience in Production Support Management, Incident and Problem Management

• Knowledge in networking, firewall, data migration, password encryption, SSO integration, and disaster recovery planning and testing

• Ability to multitask effectively and handle large amounts of data

• Highly driven, pro-active and a strong team player

• Excellent interpersonal skills and written and verbal communication skills in English

Good to Have

• Experience in Hadoop ecosystem and technologies

• Experience in NoSQL database or Big Data

• Experience in Control-M, and JIRA

• Experience in SharePoint and Confluence

We are looking for a creative, resourceful System Engineer to join us. You will be responsible for interpreting system requirements, designing solutions, and implementing solutions. This role requires good system architecture skills to produce documentation for submission. You will work with a multi-disciplinary team and be exposed to interactions with customers, partners, vendors, and sub-contractors. All efforts will feed into delivering mission-critical autonomous solutions for maritime vessels. Experience in maritime industry and power supply design is preferred.

Be Part of Our Success

• Translate system level requirements and use cases into verifiable subsystem and component level requirements.
• Design, source, and integrate subsystems, and evaluate hardware and software solutions.
• Work with industry partners to evaluate and adapt their solutions to fulfil requirements.
• Work with internal engineering development team to define required solutions.
• Troubleshoot system and propose solutions to ensure high availability of system.
• Develop and execute integration and test plans.
• Develop and maintain technical documentation.
• Communicate with customer on system design and implementation.
• Implement designs and solutions on-site.

Requirements

• Knowledge in Engineering, Computer Science or a related field.
• Strong understanding of electrical engineering principles.
• Good technical, creativity in problem-solving skills and strong reasoning ability.
• Familiarity with industry standards, regulations, and best practices related to mechanical engineering is an advantage
• Ability to work effectively in a team environment
• Ability to travel overseas as required