The Career Conversion Programme (CCP) (Train-and-Place) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand. This programme is jointly supported by the Workforce Singapore (WSG) and Workforce Advancement Federation (WAF). The training programme consists of 15 months of local attachment with Roche.

Who are we looking for?

• Fresh Graduates who have recently graduated, OR;
• Candidates with 2 years working experience and above. Not in a similar job function prior to joining this TnP Programme.

Job Overview

Ensure the completion of maintenance tasks and provision of technical support while in full compliance with current Good Manufacturing Practices (cGMP), Safety, Health and Environment (SHE) and Quality policies and standards.

Key Responsibilities

• Responsible for coordinating all external and in-house calibration, maintenance and repair of all utilities and manufacturing equipment/systems serving the entire manufacturing facility and the execution of all job orders by external vendors.
• Responsible for raising purchase requisition for vendors' services through local (Computerized Maintenance Management System) CMMS system.
• Establish good relationship with stakeholders not limited to external vendors/partners, manufacturing, utility, maintenance team.
• Provide technical support to calibration technicians on shift to perform calibration, maintenance and repair of facilities and manufacturing equipment in support of plant operations.
• Provide support to manufacturing, utility and engineering services during routine and shutdown maintenance work; and product change over in support of plant operations.
• Performs timely review and technical completion of work orders, initiate follow up work order and discrepancy notification as required.
• Provide technical expertise in Maintenance, Electrical and Instrumentation to Project Engineering Team and deliver project within stipulated timeline and budget.
• Provide support in the creation or amendment of preventive maintenance or calibration procedures and/or practices to comply with regulatory codes, specifications, standards and corporate guidelines for the safe, reliable and efficient operation of the plant to ensure validity, efficiency and maximum production equipment uptime.
• Increase the mean time between failure (MTBF) of equipment by identifying and eliminating the causes for recurring issues and to implement robust solutions.
• Partner with the Maintenance and Calibration team to reduce mean time to repair (MTTR).
• Implementation of continuous improvement project (Kaizen) and initiate change request to optimize maintenance/calibration activities if required.
• Provide support to the Maintenance and Calibration team during health authority inspections.
• Knowledge in BAS/PCS/PLC/HMI.
• Knowledge in Maintenance and Calibration Processes and Standards.
• Knowledge in Analytical and Laboratory Instrumentation.
• Participate in Root Cause Analysis (RCA's) to identify potential root cause and follow up on all corrective actions and preventive actions.
• Working knowledge in Permit to Work System, Job Safety Analysis (JSA), Risk assessment (including RCA, HAZOP, FMEA), Confined Space System, Work At Height

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

• Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Qualifications (education/experience/knowledge/skills/competencies)

• Degree/Diploma in Mechanical, Marine, Electrical/ Instrumentation or Chemical Process Engineering with at least 1-2 years experience in pharmaceutical or chemical manufacturing.
• Candidates with 1-2 years hands-on maintenance working experience in Pharmaceutical or Chemical manufacturing and experience in project start-up will be preferred.
• Strong background in Operation and Maintenance of equipment and instruments in the production and utility area will be preferred.
• Experience in setting up SAP Maintenance Program, spare parts store, project start-up environment and safety procedures/practices is an added advantage.
• Excellent computer skills including but not limited to CMMS software, spreadsheets and word processing software.
• Excellent analytical problem solving skills and persistence to resolve outstanding issues.
• Excellent inter-personal and communication skills, both written and verbal.
• Must possess the ability to work independently with adequate direction and guidance, and deliver projects/tasks on time and within budget.
• Must be team oriented and be able to work with members of the team.
• Strong leadership and customer service skills, attention to details, accurate and thorough.
• Strong concept of cGMP in area of Maintenance and Calibration.
• Willing to be scheduled to occasionally work off shift hours in support of operations.

Who we are

At Roche, more than 100,000 people across 100 countries are pushing back the frontiers of healthcare. Working together, we’ve become one of the world’s leading research-focused healthcare groups. Our success is built on innovation, curiosity and diversity.

Roche is an Equal Opportunity Employer.

Main Duties & Responsibilities :

Performing routine operations

• Attend toolbox meeting and ensure all the information regarding the status of each operations under his control are properly communicated and documented in patrol log and/or handover log sheets
• Supporting shift operation activities when in demand (such as shift manpower shortage or extra manning requirement during special operational period).
• Strictly follow documented procedures (e.g. Standard operating procedure- SOP, EHS regulations, Check sheet, risk assessment) to ensure safe and stable operation in the plant
• Record all the information in the documented records (eg: Log-sheet or checksheets) as required and be involved in the process trouble-shooting / investigations / abnormality reports
• Checksheets and workflow sheet must be completely filled up at each step and final completion confirmed by supervisor
• Provide input and/or prepare draft of revised manufacturing SOP or checksheets
• Promptly report any near miss / deviations / incidents to his Supervisor, directly or through Risk reporting & improvement proposal system.
• Keep good housekeeping conditions at all times, return all tools / items to designated place and enforce similar standards to contractors. Ensure tools / items fully accounted during handover / takeover according to quantity and condition specified.
• Assist his supervisor to collect data and samples to facilitate trouble shooting or improvement effort.
• Support implementation of new/revised procedure and check compliance to the procedures. Inform his direct supervisor if any abnormality is detected
• Monitor stores and tools managed by day team to ensure sufficient stores and tools, and in good working condition
• Provide administrative support to production department members, in purchasing consumable items. Assist operation team in sourcing new operational tools and maintain the inventory of item.
• Senior day technicians, are required to participate in ASDM activities, including procedure preparation, blind allocation, critical task coordination.
• Working team in managing Car seal program to ensure processes valves are locked at defined position for safety credit. In parallel, control and manage NO/NC program and reporting status to his superior.

Quality Control

• Has responsibility to ensure quality of products under his control, including prevention of foreign material contamination

Performing non-regular work

• When an abnormal condition is detected (outside of normal operating condition), stop operation and inform supervisor immediately
• Support actual NRW, in parallel to shift operation. Join toolbox meeting, understand and take effective measurement to mitigate and manage the risk during NRW execution. Conduct properly work closure including normalizing the process as per plan and carry out house keeping at workplace.

Emergency response

• Involve in CERT team/organization when appointed as part of CERT (Company Emergency response team)
• Participate in CERT training, drills and audits defined by EHS department
• When emergency situation occurs, follow the steps established in the emergency response plan, perform assigned role such as fire warden, first aider or rescuer

Committee and training

• Involve in Production department committee as shift representative, to provide feedback to committee and assist committee to implement action items
• Train and guide new day technicians during On-job-training

HR policy and Overtime participation

• Adhere to HR policies requirements and perform overtime duties pre-arranged with supervisor
• Where possible, participate in over-time work or emergency call-out due to urgent manpower needs in production department
• Join short term shift work or ad-hoc support to shift team as instructed by direct supervisor

REQUIREMENTS

• Diploma or Nitec in Chemical engineering or equivalent.

• Minimum 2 years work experience in a chemical processing environment. Experience in polymerization

and/or extrusion is advantageous.

• Possess basic Knowledge of chemical processing with working knowledge of ISO14001, ISO9001,

SS506 part 3

• Proficient in using computing software – MS word, MS Excel

• Able to work on day in a fast paced environment

Your Responsibilities:

• Demonstrate a strong understanding of the manufacturing of Upstream (Fermentation) processes.
• Possess practical experience with Fermenters and associated equipment across a range of scales, from small to large.
• Skilfully troubleshoot fermentation process issues related to equipment and overall process to ensure seamless operations.
• Showcase proficiency in both Batch and Fed Batch phases within the fermentation process.
• Exhibit hands-on experience in both intra-cellular and extra-cellular Microbial fermentation processes.
• Take charge of operating, optimizing, and stabilizing the upstream manufacturing process.
• Showcase your expertise in Contract Development and Manufacturing Organization (CDMO) processes, including customer management.
• Demonstrate a successful history of scaling up fermentation processes from small to large scale.
• Utilize your experience to resolve contamination issues in the fermentation process.
• Take responsibility for training the manufacturing team and ensuring strict adherence to all procedures during the process.
• Exhibit hands-on experience in project-related activities, specifically equipment qualification and process validation for fermentation processes.
• Prepare comprehensive process-related documents in collaboration with the Quality Assurance team.

Your Profile:

• Bachelor’s or higher degree in a relevant field.
• 3-5 years proven experience in upstream manufacturing with a focus on fermentation processes.
• Strong troubleshooting skills and a proactive problem-solving mindset.
• Excellent communication and interpersonal skills.
• Familiarity with CDMO processes and customer management.
• Ability to lead projects and work collaboratively in a team environment.

ONE OF SINGAPORE’S TOP SME 1000 COMPANIES, MORE THAN 30 YEARS IN THE INDUSTRY & LEADER IN INDUSTRIAL/ OIL & GAS/ MARINE SAFETY PRODUCTS & SERVICES IN JURONG IS LOOKING FOR TECHNICIANS TO JOIN OUR TEAM.

SERVICING AND REPAIR OF MARINE AND INDUSTRIAL LIFESAVING AND FIRE FIGHTING EQUIPMENT

COMPANY TRANSPORT PROVIDED FROM BOON LAY MRT

• MIN ITE
• COMPLETE NS
• EXPERIENCE AN ADVANTAGE
• ABLE TO WORK INDEPENDENTLY AND SELF-MOTIVATED
• GOOD INTERPERSONAL SKILLS

BONUS: OVERTIME CLAIM + VARIABLE BONUS

Job Description

• Responsible for the continuous supply of purified water, chilled water, PUB water, steam, compressed air, etc.
• Responsible for continuous treatment of process wastewater and ensuring compliance with the discharge of treated water to the public sewage system.
• Responsible for carrying out or coordinating with vendors on asset repairs, maintenance, calibration, or project works.
• Manage external contractors/vendors in support of operation and maintenance activities.
• Assist supervisor in preparing equipment for maintenance, performing equipment isolation, LOTO, and supporting permit-to-work issuance.
• Ensure compliance with GMP, regulatory requirements, ISO and EHS standards, and other relevant policies/standards, and support audit functions.
• Any other duties and responsibilities as assigned by the Supervisor.

Job Requirements

• Possess a minimum NITEC in a technical field of study.
• Minimum 3 years of working experience in the electronics, cosmetic, food, medical, or pharmaceutical industry handling facility or utilities.
• Boiler Attendant Class 2 certification is a must.
• Competence in purified water, chilled water, steam, compressed air, wastewater treatment, clean room HVAC operation, and maintenance.
• Self-motivated, good teamwork and interpersonal skills.

Based in Tuas Company (Transport provided)

Benefits:

• 37.5 hour work week (additional hours is OT-payable)
• $90 quarterly allowance to buy Coca Cola products
• 18 days Annual Leave
• Shift working hours (Rotating shift hours, Mon - Fri, 730AM - 4PM / 330PM - 12MN)

Pacific Refreshments Pte Ltd (The Coca-Cola Company) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Job Summary

The main function of this job is to generate maximum output of quality products through effective use of assigned resources and assets. To achieve this goal, this position:

• Looks at optimizing production, yield and product quality.
• Implement and maintain quality systems, improvement projects and other initiatives and tasks in line operation.

Operations

• Achieve line and batch efficiency and output requirements
• Maximize output by reducing downtime through monitoring and controlling changeover time.
• Produce the right quality by managing all quantity according to the process order.
• Ensure proper product labelling, coding and other information accurately.
• Carry out the right cleaning, sanitation and GMP according to Quality System requirements.
• Proper handover before going on leave / changeover shift.
• Follow strictly safety and environment requirements at the workplace.

Job Requirements:

• Diploma or NITEC qualifications in Engineering, fresh graduates are welcomed to apply
• Good communications in English
• Team player

If this sounds interesting and you like to explore, we look forward to meeting you!

To maintain and repair hydraulic equipment

To replace seal kit

To replace hydraulic hose

To troubleshoot hydraulic circuit

Our Client:

• Marine Industry, German MNC
• 5 Days, Office Hours
• Pioneer/Benoi Area
• UP $5000 Basic + Variable Bonus

Job duties:

• Conducting marine equipment’s overhauls, inspections, & repairs on site
• Preparing relevant reports & scheduling jobs
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Job Descriptions:

• Carry out rectification and troubleshooting of plant and auxiliary equipment as assigned.
• Carry out routine checks and testing of plant equipment based on job requests in accordance with good maintenance practice.
• Do hands on planned maintenance such as but not limited to greasing and cleaning of equipment and machinery.
• Record details of maintenance and repairs works carried out.
• Maintain proper housekeeping as well as tidiness of the workplace.
• Manage documentation such as work procedures accordingly to plant standard SOPs and quality standard.
• To adhere strictly to all EHS rules and regulations imposed by the plant.
• Any ad-hoc tasks and duties assigned by supervisor / plant management.

Requirements:

• Minimum NITEC in Mechanical / Mechatronic Engineering or higher .
• Minimum 1 years’ experience in operation or manufacturing environment
• Good hands on experiences in rotation equipment repair such as pumps & agitators is an advantage
• Have initiative, good communication skills and able to take responsibility.
• Working knowledge of the principles and mechanics of plant equipment is essential
• Possess a basic welding skill will be an added advantages

Our Client:

• Marine Industry, German MNC
• 5 Days, Office Hours
• Pioneer/Benoi Area
• UP $5000 Basic + Variable Bonus

Job duties:

• Conducting marine equipment (such as highly flexible couplings, dampers, mounts, shafts) overhauls, inspections, & repairs on site
• Preparing relevant reports & scheduling jobs
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products (highly flexible couplings, dampers, mounts, shafts) & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Key Responsibilities:

• To perform installation, troubleshooting, test and repair works for German manufactured automated storage system
• To commission automated storage system and provision of high quality support and training to the end-customer.
• To standby 24 hours on duty roster.
• To provision engineering services on weekends, public holidays or extended hours (if required)
• To support installation.
• To prepare project schedules and provide good follow up with customersTo be able to do wiring
• Any ad hoc duties assigned by Superior

Qualifications:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent

Knowledge and experience:

• Minimum 1 years experience in similar position on maintenance/service of machinery
• Candidates with no experience are welcome to apply. Training will be provided
• Knowledge of electrical works and the analysis electrical circuit diagrams is essential

Requirements:

• Must possess valid class 3 driving license
• Required Skill(s): MS Excel, MS office

Working hours & location:

• Monday –Thursday – 8.00am to 5.30pm, Friday – 8.00am to 5.00pm.
• Location: 49 Tuas Close View, Singapore 637474

Job Description:

• To carry out water sampling for process unit and send to lab for analysis and follow up with the recommendation in process.
• Operate Boiler / Evaporator / cooling tower / RO in the WasteWater Plant
• Control Panel operation through SCADA system to monitor and adjust process parameters.
• To update test result in data system
• To handle general workers in the plant for daily plant works and chemical handling
• To maintain all the process units/ pumps and equipment’s and instrument in good condition.
• To support shift ad-hoc operation

Requirement:

• Education – N Level & above (equivalent in O Level with high experience in the relevant field to be considered)
• Skills - Basic English communication includes reading and writing skill
• Abilities – Ability to work independently
• Other characteristics such as personal characteristics – Team player with interpersonal skills (gentle, considerate and patient)
• People certified with Forklift / WAH/ OPSOC / Boiler attendant class-2 have added advantage.

Job Summary:

• Salary: Basic up to 4500k
• Working Hours: 8am - 5.30pm
• Working days: Mon - Fri
• Location: Ang Mo Kio

Job Description:

• Develop Oracle Reports & Forms, PL/SQL, XML Publisher & DotNet
• Provide techno-functional support on Oracle EBS R12 in Manufacturing & Finance
• Liaise directly with end-user on problem-solving, requirements gathering, feasibility study and design solutions
• Conduct training and user-acceptance/system test on all changes made

Job Requirements:

• Degree in Information Technology or equivalent
• Minimum 2-3 years of experience in functional support on Oracle EBS R12, Oracle Report Builder and PL/SQL is preferred
• Able to work independently under tight schedule
• Service-oriented and good problem solver

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Eugene Eiap Yeow Hong

Registration Number: R23112438

EA License No: 06C2859 (MCI Career Services Pte Ltd)

• Coordinate with customers and provide sales support to the sales team

• Prepare and Submit Quotations to Customers

• Handle the processing of all orders with accuracy and timeliness

• Liaise with the logistics team to ensure customers' deliveries are met

• Inform clients of unforeseen delays or problems

• Monitor the team’s progress, identify shortcomings and propose improvements

• Assist in the preparation and organizing of promotional material or events

• Any ad-hoc duties assigned (in relation to sales)

Position: Printer Technician / Printing Technician

Location: near Joo Koon MRT

Job Description & Requirements:

- setting of plate

- operating of printing machine

- change of colour, washing of rollers and mixing of inks

- check the quality of printed sheets

- checking and maintaining of machines

- keeping of items in the correct location / housekeeping duties

- any other duties

- NTC with 2 years experince in paper or metal printing an advantage

- willing to work 12 hours rotating shift (6:45 to 6:45)

Trainee Aircraft Technician

• Basic Up To $2600
• Monday to Friday: 8.30am - 5.30pm
  Shift work may be applicable
• Paya Lebar & Seletar (Airport)

Roles & Responsibilities after completion of Aircraft Maintenance Technician (ACMT) training:

• Receive comprehensive training on the maintenance, overhaul, and repair of aircraft engines.
• Assist experienced technicians in the disassembly, assembly, and inspection of aircraft engines.
• Learn and follow procedures for cleaning, grinding, and polishing engine components.
• Assist in conducting measurements and inspections to ensure components meet specifications.
• Participate in engine testing and performance checks to identify any issues or abnormalities.
• Collaborate with the team to troubleshoot and diagnose engine problems.
• Assist in the installation and removal of engine parts, including seals, bearings, and gaskets.
• Maintain accurate documentation of maintenance activities, including repairs and parts used.
• Adhere to safety protocols and regulatory requirements in all engine maintenance tasks.
• Continuously develop knowledge and skills through training and on-the-job learning.

Requirements

• 14 months traineeship + 24 months bond upon completion of traineeship
• N level and above, with and without engineering background
• No experience required

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Kam Shwu Min | EA Personnel No.: R22111811

Responsibilities and Duties

Check equipment and operating systems and correct wherever necessary.

Ensure mechanical operations, standards and controls are maintained at high quality.

Resolve motor, pump, conveyor and hydraulic problems.

Ensure high level technical support to lower level technicians.

Show expertise in working with team and independently.

Comply with company safety guidelines and procedures.

Repair and perform preventive maintenance as per established standards.

Use hand tools like power tools and rigging equipment daily.

Weld using cutting torch.

Handle simple and complex heavy industrial equipment like forklifts, scissor lifts, basket trucks and bobcats.

Comply with company and customer regulations and policies.

Handle personal tools for job including up-to-date documented personal tool lists.

Handle time accounting ad complete work order.

Manage positive customer and employee relations.

• To perform and execute preventive maintenance tasks.
• Installing and performing diagnostic tests on mechanical systems.
• Troubleshooting mechanical malfunctions and breakdowns, as well as performing repairs.
• Documenting processes and maintaining mechanical service records.
• Optimizing mechanical efficiency by adjusting machinery and equipment settings.
• Maintaining a tidy work environment and adhering to industry regulations.

Job Requirement

• Nitec in Mechanical/Mechatronics
• Handle Heavy Equipment, Forklift etc
• Safety/Vocational Qualifications - Work at Heights, Confined Space entry etc.
• Able to perform rotating shifts duty
• Working Hour : 7:30 am - 5:15pm
• Working day : 6 Days

- Plan, manage and execute Production planning focusing on customer order fulfilment
- Ensure Production delivery plans are met
- Liaise with Production Manager and workers to create Production schedule and job-orders
- Handle with internal to determine sales orders and delivery schedule
- Co-ordinate the purchasing and requisition of raw materials
- Continue improvement of Production Planning System
- Monitoring operations to ensure that they meet production standards.

- Recommending adjustments to the assembly or production process.Inspecting, testing, or measuring materials or products being produced.Measuring products with rulers, calipers, gauges, or micrometers.
-Conduct Product Tests and Assessment.
- Identify Product Defects.
- Record and Report Issues.
- Support Process Improvements.
- Make Necessary Repairs.
- Relevant working experience in Manufacturing company
- Familiar with ISO 9001:4500
- must able to work OT as and when required.
- able to work under pressure and work independently as well as in a team
- Good interpersonal and communicate skillsOther ad-hoc duties assigned
- Possess at least a NITEC in Mechanical Engineering.

- Working Hour: 5 days week (Monday to Friday 8am to 6pm)
*Position open for Singaporean or Singapore PR ONLY*

Qualified or Interested candidates, please send us your updated resume to [email protected] regret to inform that only shortlisted candidates would be notified.

* NO AGENT *

You will provide support direct to the Mechanical Supervisor (Maintenance) to perform the job task such as checking, repairing and servicing machinery, equipment, systems and infrastructures as part of the work force in an integrated Hazardous Chemical Waste Treatment Facility and related infrastructure.

Job Description:

• Responsible for the maintenance activities work task as direct instruction by the Mechanical
• Supervisor or Engineer (Maintenance) to maintain machines and equipment in the prescribed condition.
• Hands on experience in servicing of rotating equipment like various type of Pumps, chain and belt conveyors, mixers, blowers,agitators, fans and rotary valves.
• Good knowledge in Laser alignment and independently able to do.
• Perform daily preventative maintenance and troubleshooting of pump failures.
• Hands on experience in mechanical seal assembly.
• Able to read and understand the P&ID.
• Timely close all work orders assigned by supervisor in CMMS.
• Ensures quality of work within the set time frame.
• Ensure to maintain adequate use of tools, supplies and parts to accurately repair all equipment.
• Follow job method of statement and risk assessment to perform the job task.
• Attend daily tools box meeting
• Always follow and make sure plant safety rules and regulations.
• Participate in monthly safety committee meetings.
• Conduct routine 5S at maintenance workshop, store, substations and work area at site.
• Reporting to the mechanical supervisor on daily work activity.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimally an ITE certification or Diploma in Mechanical Engg or equivalent is an advantage.
• At least 5 years of previous experience of working in static and rotating equipment in Chemical Process or Treatment Plant Industry.
• Good verbal and written communication skills.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using CMMS (Computerized Maintenance Management System) is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.

Incumbents must be willing to work in Tuas South vicinity and transport will be provided at Boon Lay MRT & Chua Chu Kang MRT (To & Fro)

Responsibilities

· Perform overhead cranes, gantry cranes, monorail cranes electrical installation and troubleshooting task, repairs and parts replacement to resolve related site issues

· Recommendation of part replacement to ensure continuous operation of the equipment

· Coordinate and liaise with Project Engineer/Manager and respective supervisor on tasks and works relating to the project

· Responsible for doing control panel and any other works related to Electrical duties

· Ensure compliance with relevant standard

· Ensure compliance with company’s Quality Management Systems

· Working closely with Supervisor and Mechanical team to get the job done

· Ensure service and work readiness during office works hours and after hours

· Other ad-hoc duties as assigned

Requirement

Diploma/Degree in Electrical/Electronic

Minimum 2 to 3 years in the Crane industry

Knowledge of crane troubleshooting, various brands of inverters, PLC system.

Ability to generate Electrical drawings in accordance to Singapore standards a plus

Holders of Driving Licence Class 3

Requisition ID: R000053812
Job Location: Singapore - Jurong Island

To submit application, please click below posting link or copy and paste to a new browser:

https://chevron.wd5.myworkdayjobs.com/jobs/job/Singapore-Oronite-Plant-Main-Office/Mechanical-Technician_R000053812

• ·Performs maintenance, repair, alignment and testing of rotating equipment and components such as compressors, chillers, centrifuges, pumps and gear boxes, mechanical seal, couplings etc
• Performs maintenance servicing for pressure relief devices such as Pressure Safety Valve, Breather valves, Emergency hatches etc.
• Supervises maintenance, cleaning, repair and handover of fixed equipment such as boilers, pressure vessels, storage tanks, piping, heat exchangers, fin fans, painting and insulation work etc.
• Read and understand equipment drawings, datasheets, crane lifting plan, P & ID or other instructions
• Determine materials, tools, manpower and methods required to complete the maintenance task
• Develop Job Safety Risk Assessment for every work assigned. Ensure Safe Work Procedures are followed. Ensure safeguards are followed such as valid permit are issued, wearing prescribed Personal Protection Equipment etc.
• Liaise with operations for system handover; liaise with other functions such as warehouse and equipment vendors for completion of urgent break-in work
• Writes post maintenance reports, communicates findings to relevant work groups; follows and completes maintenance quality assurance checklist
• Assists in troubleshooting equipment with operations and equipment vendors; able to utilize and interpret manufacturer’s operation and repair manuals

Required Qualifications:

• NITEC/Higher NITEC/Diploma in mechanical engineering or related engineering discipline
• Minimum 2 years of relevant working experience
• Possess a high level of safety awareness and chemical plant safety experience.
• Good knowledge with Permit to work system, preparing quality JSRA(Risk Assessment).
• Comply with SWP (Safe Work Practices), Procedures and Job Aids.
• Good experience in inspection, repair, installation, and alignment of rotating and stationary equipment such as pumps, compressor, blowers, agitators, various type of manual valves, vessels and heat exchangers.
• Preferably with background in oil & gas, petrochemical, and pharmaceutical industries
• Strong oral and written communication skills
• Ability to plan and schedule work efficiently. Ability to work effectively in a scheduled and customer driven environment.
• Ability to use and update simple work status and history data into SAP system

Preferred Qualifications:

• Able to operate drilling and fixed hoist
• Able to thread piping and fittings for assembly, join PVC piping and tubing
• Able to perform hydro-test of fixed equipment or rotating equipment during integrity/leak test
• Utilize Computerized Maintenance Management System (CMMS). Input into CMMS details such as equipment history, time confirmation, work notification history. Provide feedback post maintenance for continuous improvement'

Job duties:

• Preparing relevant reports & scheduling jobs
• Conducting marine equipment’s overhauls, inspections, & repairs on site
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area (West)

Please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Support Operations Supervisor in operating the chemical processing plant to ensure quality product and to meet business targets.

Key Responsibilities:

• operate, monitor process equipment to ensure that the process is operating within defined conditions and product specifications
• work with Operations DCS Technician to deal efficiently and effectively with any deviation in process parameters to ensure “Zero” safety and environment incident
• patrolling, inspection of field equipment and data logging
• Perform - routine sampling of process and conduct analysis - housekeeping and PPM of assigned area - loading / unloading raw material - minor maintenance
• prepare plant equipment for release to maintenance crew
• perform inspection and audit to meet corporate safety and local legislation guideline
• Be a member of the Site Emergency Response Team

The Candidate should have:

• Diploma in Chemical Engineering or related discipline or
• NITEC/Higher NITEC in Chemical Process Technology, with minimum 2 years of relevant working experience.
• 2-5 years field operations experience in a high hazard chemical plant, with DCS experience would be advantageous
• Preferable to have a Boiler Attendant 1st grade (preferred) or 2nd grade and/or Steam Engineer 1st grade (preferred) or 2nd grade.
• Commitment and adherence to safety systems
• Strong analytical thinking, practical problem-solving and good communication skills
• Conversant with World Class SHE and Operational principles relevant to operation of high hazard plant
• Ability to work effectively in a multi-discipline and multi-cultural team in a high pressure environment
• Good command in English and computer literacy
• Able to perform shift work
• Diploma holders who just graduated from relevant discipline are welcome to apply

• To conduct sampling of incoming waste.
• To conduct laboratory analysis testing of Pre-Acceptance, Post-Acceptance, process, monitoring and adhoc samples from internal or external customers.
• To carry sample analysis according to standard operating procedures.
• To perform data entry in LIMS or spreadsheets for results reporting purposes.
• To carry out calibration and maintenance of all laboratory equipment as per schedule or instructed.
• To ensure good housekeeping in the laboratory.
• To follow the existing system and documentation as per the procedures.
• To update the relevant records
• To work harmoniously with colleagues in the same department and other department
• To ensure a safe working environment in the lab.
• Any other task assigned by management.
• Safety is a core value at Veolia, and a pre-condition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Diploma in Chemistry/ Chemical Process Technology; or O level in science stream with at least 3 years of relevant experience.
• Able to read and communicate in English.
• No colour blindness.
• Comfortable with working on Monday to Friday (7.30am to 4.30pm) & Alternate Saturday (7.30am to 11.30pm)

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.