This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible for all related operations for automated welding & laser machines.

Essential Responsibilities:

• The job requires the candidate to take internal/external exams & periodic proficiency exams.
• Perform set-up, calibration, programming, operation of automated welding, or laser machining that meets engine component repair requirements.
• Perform scheduled maintenance, housekeeping & process control of the machines and associated processes.
• Assist in process improvement and/or development, including but not limited to fixture design, programming, and machine maintenance.
• Carry out on-job-training for other employees.

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level.
• Able to work rotating shifts.
• Willing to accept a 1-year bond after the program.
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

RESPONSIBILITIES

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

The incumbent will manage installation, maintenance, service, trouble-shoot and repair operations-related facilities and equipment, including automated sorters, conveyor systems, ULD handling equipment, lifting equipment, AGV system and manual equipment etc

• Support and participate in the installation and testing of all operations-related facilities and equipment during pre-operational phase.
• Carry out maintenance/servicing programs for operations-related facilities and equipment.
• Keep accurate maintenance records.
• Perform day-to-day checks of Hub’s automated and mechanical equipment to ensure their safety and serviceability.
• Work with external maintenance providers to ensure compliance with service level agreements.
• Provide instant response in the event of equipment failure.
• Identify, trouble-shoot and rectify equipment failures “on- the-spot” and within agreed timeframes.
• Control inventory level of the maintenance spare parts so as to optimize Hub’s operations with minimal operating costs.
• Knowledge of automated and mechanical material handling or process systems and related checking, maintenance / servicing concepts and methods.
• Knowledge of MS Office, Visio & Autocad; ability to produce and understand mechanical / electrical engineering drawings and maintenance instructions.
• Ability to diagnose and repair electrical and mechanical problems in automated and mechanical material handling or process systems, including adjustment /repair /replacement of components such as motors, gearboxes, bearings, rollers, pulleys, belt tracking, belt tensioning, pneumatic components, hydraulic components, etc.
• Ability to weld, solder and operate machinery typically used for repairing mechanical equipment / components.

Requirements:

• Minimum of 2 years’ hands on experience in installation, maintenance and repair of automated and mechanical material handling or process systems.
• Relevant vocational qualifications or Diploma in a relevant engineering discipline.
• Relevant engineer licenses in electrical / mechanical / maintenance engineering would be advantageous.
• Good communication skills
• This role is required to perform rotating shift role.

Location: DHL Express (South Asia Hub), 121 Airport Cargo Road, Singapore 819480

Main Responsibilities:

• Supervise and inspect electrical installations, maintenance, and repairs to ensure compliance with safety regulations and standards
• Responsible for the maintenance and repair of electrical equipment
• Guide the team to check the electrical systems and to troubleshoot the electrical faults promptly and efficiently
• Ensure all electrical work is performed in accordance with local codes and regulations
• Provide technical guidance and support to the electrical team
• Collaborate with other departments to ensure seamless operations
• Liaise with project teams and authorities on electrical plan submissions
• Act as the QP for electrical plan submissions
• Any other tasks or duties as assigned by the Supervisor/Management

Requirements:

• Valid Grade 7 Licensed Electrician Worker Licence
• Understanding of electrical systems, safety standards, and regulations
• Hands-on experience in troubleshooting electrical equipment
• Proficient in English (spoken and written)
• Strong problem-solving skills and attention to details
• Good communication and interpersonal skills
• Able to multi-task and work in fast-paced environment

Work Location:

• Changi East

Role and Responsibilities

• Keeping track of attendance & leaves of employees and report it to HR.
• Update on daily basis those on MC/Leave/Training/Travelling/ meeting.
• To meticulously orchestrate a series of events and adeptly coordinate all requisite arrangements throughout the year.
• Responsible for local purchase and inventory of workshop.
• Accountable for all admin work of workshop like House Keeping, Security, Pest Control, CCTV, maintenance of AC & other office equipment’s, Water dispenser, Stationery, Dispatch, Pantry & other Vendors.
• Ensure the proper service of connectivity’s like internet, telephone and mobile services.
• Liaise with cleaning company and TOLL management office.
• Liaise with local IT supplier and HQ IT TEAM on internet issue.
• Liaise with Insurance on Medical claim.
• Ensure office Safety (Alarm system).
• Create Purchase order for workshop consumable.
• Manage Travel Desk (flight Ticket, Hotel accommodation, Visas, etc.)
• Broadcast of any newsletter/memo on office related matters from unique group and Circular memo from management Office (TOLL).
• Assist Account on petty cash/Advance cash if required.
• Assist in ordering gas for the use of forklift (whenever required), Hire of crane and forklift from TOLL (Request form).
• Purchase of office goods for. e.g. furniture, stamps, etc. Order online (RS component &Element14) for workshop consumable.
• Maintaining record of asset for laptop, handphones, monitors Desktop, Dongles, sim cards, printers, cupboards, chairs, tables and pantry equipment etc.
• Maintaining good housekeeping practices in all areas.
• Data Entry in D365 System related to Admin work.
• Perform other ad-hoc tasks assigned by management.

Knowledge, Skills & Experience

• Highly organized and work well in fast-paced environments.
• Workable knowledge of Customs requirements and relevant document control.
• Exceptional communication skills and the ability to effectively multitask are essential.
• Reliability, Systematic, comprehensive, and displaying excellent attention to detail.
• Proficient in MS packages and D365 systems.
• Data organization and storage knowledge.
• Impeccable telephone etiquette.
• A positive “can-do” attitude.
• Excellent communication skills, written and oral, especially in English.
• Ability to work in a team.

SIA Engineering is recruiting a number of positions for our Singapore Operations located in Changi ( East side of the island ).

Available roles include the following :

1. Aircraft Technicians ( B1 )
2. Avionics Technicians ( B2 )

Requirements :

• Applicants who applied for the above role must have experienced in similar role(s) in other companies.
• Must have relevant Engineering qualifications
• Must have necessary supporting documents/certifications to prove qualifications
• Willing to work in Singapore
• Ability to speak and write in English language is compulsory
• Immediately available candidates are welcomed

Shortlisted candidates would be contacted for an online interview.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

A) The collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

B) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Responsibilities:

• Maintain of machinery & facility maintenance records for traceability needs
• Maintaining of air conditioning, electric power, plumbing and lighting system, cleaning, decoration, grounds, building keeping and security of building surroundings.
• Responsible in overseeing all aspects of safety to ensure compliance to the Workplace and Health Act and other safety related statutory legislations.
• Conducting audits in facilities on relevant risks and support and work with facilities to mitigate these risks.
• Maintaining comprehensive records and reports on safety and environment management activities.
• Monitor and escort external sub-contractors in carrying out repair and maintenance works within Company’s premises
• To react actively in recovery of daily machineries & accessories breakdown (To be efficient with least MB downtime)
• To provide support in daily mechanical, electrical or air-conditioning preventive maintenance works inclusive of building maintenance
• Plan, schedule and perform of preventive maintenance program on machinery & facility (Compressor, cooling tower, air-condition, etc)
• Attend to all break downs or complaints promptly and to perform investigation and rectification works
• Ensure all works are carried out safely and in accordance
• Work closely with purchaser to be cost efficient for repair and maintenance tasks

Requirements:

• Possess at least a Professional Certificate/NiTEC, Engineering (Industrial), Engineering (Metal Fabrication/ Tool & Die/ Welding), Engineering (Mechatronic/ Electromechanical) or equivalent;
• Min. 2 years of relevant working experience preferred;
• Candidates holding an Electrician’s license and prior relevant working experience in medical molds industry will be an added advantage.

Key Responsibilities:
• Perform routine microbiology/chemistry testing services by using established procedures/protocols. Support testing by following procedure in completing validation/revalidation activities (equipment and/or processes) for critical systems and sterilization equipment.
• Perform preliminary investigation and write-up; deliberate with Microbiologist/Chemist in root cause investigations for product/sample failures and Out-of-Specifications (OOS).
• Perform validation/re-validations for new/existing laboratory equipment according to established protocol.
• Update operating procedures and/or validation protocols/reports
• Data entry and trending of routine microbial/chemistry testing for analysis by Microbiologist/Chemist
• Review, follow and perform job functions in compliance with established work instructions and adherence with SOPs, including recording traceable information on device history records.
• Other incidental duties

Education and Experience:
Other: in NITEC or equivalent in related science field, 3 years experience previous experience working in a laboratory environment Required or
Other: in Higher NITEC or equivalent in related science field, 2 years experience previous experience working in a laboratory environment Required or
Associate's Degree or equivalent in Diploma in related science field, 1 Year experience previous experience working in a laboratory environment Preferred or
Bachelor's Degree in in related science field Preferred

Additional Skills:
• Ability to read, comprehend, and write English; good communication and interpersonal skills, required
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Must be able to work in a team environment and with minimum supervision
• Good Computer skills, required
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

· Responsible in providing day-to-day engineering support to manufacturing operations to achieve key business objectives involving quality and productivity.

· Provide support for engineering conception phase all the way to implementation and operations support.

· Work closely with cross functional teams to provide innovative engineering solutions for continue process improvements.

· Active involvement in projects relating to design and implementation of manufacturing-related equipment, such as automated optical inspection units.

· Assist in developing, updating and revising manufacturing documentation in accordance with company policies, relevant standards, and regulations established by regulated agencies (e.g. ISO9001/14001/13485).

· Assist in initiating, evaluating and implementing engineering change order.

· Assist in anyalzing and determining conformance of materials and parts manufactured.

· Assist in monitoring and improving productivity metrics established as company’s goal.

· Participate in development and validation activities for R&D products.

Knowledge in Delta PLC programming and COBOT.

1. JOB DESCRIPTION

Job Title

Technician/Engineer (Contract/Perm)

Occupation

Technician/Engineer

Job Description & Requirements

Job Highlights

• 3 months Completion Bonus on 2 years renewable contract
• Mon - Fri 8.30am to 5.30pm. Training provided
• Transport and Mobile Allowance + OT + Medical reimbursement

Job Description

2 years renewable contract with 3 months completion bonus. 5 days week + OT + Transport allowance + Mobile allowance. Responsible for facility hook-up, installation and start-up process of semiconductor equipment.

Responsibilities

• Perform installation work according to guidelines and procedures
• Perform safe and proper move-in according to procedures
• Tally and check the conditions of parts and accessories
• Support engineering activities
• Ensure good EHS compliance

Requirements

• Must possess Min. Certificate / Diploma in Electrical / Mechanical / Electronic Engineering or equivalent
• Preferred bilingual in English and Chinese to handle Chinese speaking customers’ technical enquires & conduct trouble shooting based on customers’ feedback
• Cleanroom environment
• Able to start immediately preferred

About the Role:

As a CBRE Data Center Technician, you will perform preventative maintenance and corrective repairs within a Data Center operation.

This job is part of the Critical and Technical Services job function. They are responsible for technical maintenance services in critical client environments.

What You’ll Do:

• Assist with daily site inspections of all Mechanical & Engineering systems and technical equipment, including servicing and maintenance.
• Ensure the site's environmental conditions provide a safe work environment.
• React to Building Management System alarms, and complete emergency repairs as needed.
• Work with third-party vendors, ensuring compliance with company-developed processes, procedures, and all applicable laws and regulations.
• Alert management if subcontractor performance doesn’t meet all requirements per the Master Service Agreement.
• Complete planned preventative maintenance (PM) and reactive maintenance on all equipment.
• Check BMS for running and alarm conditions and respond to HVAC-related client problems.
• Building walkthroughs, taking meter readings from UPS, PDU’s and utilities.
• Provide fixes to facility and plant faults and defects.
• Complete assigned work according to established processes and procedures. Follow all safety processes and requirements and ensure all regulatory requirements and quality standards are met. Conduct routine quality checks for comprehensive maintenance records.
• Complete all required training to ensure successful completion of all job-related responsibilities.
• Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.
• Impact through clearly defined duties, methods, and tasks are described in detail.
• Deliver own output by following defined procedures and processes under close supervision and guidance.

What You’ll Need:

• Training in a Technical discipline having served an apprenticeship or equivalent with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. Ability to work shifts that may include weekends and holidays
• Must be able to Meet the physical requirements of this role.
• To effectively present information to an internal department, client, management and/or colleagues.
• Ability to follow basic work routines and standards in the application of work.
• Communication skills to exchange straightforward information.
• Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Strong organizational skills with an inquisitive mindset.
• Basic math skills. Ability to calculate simple figures such as percentages, discounts, and markups.

Collins Aerospace, an RTX business, is a world leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Through industry-leading businesses – Collins Aerospace, Pratt & Whitney, and Raytheon – RTX pushes the limits of technology and science to redefine how we connect and protect our world.

Our Rockwell Collins Avionics Service Centre in Singapore provides avionics MRO services for Asia Pacific commercial customers. Sales and engineering teams are co-located, providing a regional Centre of Excellence for avionics support.

In this role, He/She will responsible

• Set up and operate test equipment in the repair, overhaul and modification of Avionics Line Replaceable Units.
• Conduct regular functional/self test and calibration on Automated/Manual Test Equipment.
• Ensure all test equipment are within calibration due-date before testing of LRU is carried out.
• Perform modification in accordance to service bulletins on LRUs as and when required
• Troubleshoot customer's unit and return it to serviceable condition in the most efficient manner.
• Verify and ensure all repairs or modifications carried out conform to quality and workmanship standards.
• Maintain good housekeeping practices at work place and test benches at all time
• Carry out duties as assigned by the Supervisor to meet team’s objectives.

Requirement:

• Minimum NITEC / Higher NITEC in Electronic Engineering or any other related discipline.
• Preferably 1- 2 years work experience in aviation industry or avionics related field.
• Self-motivated and able to work independently with a positive attitude towards change management.
• Good understanding of electronics theory.
• Will to work on rotating shift for day/night.
• Candidates with more experience will be considered for a senior role.

What We Offer

• Career and skills development opportunities.
• Employee scholarship program for further education.
• Comprehensive health, medical and dental benefits.
• On-the-job training
• Competitive remuneration package.
• Allowance and overtime benefits where applicable.

Company: Aurrigo

Location: Singapore

Hours: Full-time (38.75hrs/w)

Sector: Vehicle Operations

Employer summary

Aurrigo is a leading international authority on transport technology solutions.

As both manufacturer and operator of ground-breaking autonomous vehicles, Aurrigo has a unique ability to provide and administer bespoke autonomous solutions. Following award-winning deployments at Heathrow Airport, Birmingham Airport and throughout the UK, Aurrigo is looking to expand its team in Singapore. Would you like to contribute to the future of mobility?

What you will do

• Perform mechanical maintenance and repairs on our fleet of autonomous vehicles.
• Identify and troubleshoot issues with the vehicles using diagnostics equipment and with support from colleagues
• Plan repair procedures using existing documentation and manuals, and own experience and intuition
• Concisely explain the nature of issues encountered, and present rectification plans to the wider team for action
• Test the successful functionality of mechanical, electrical and electronic parts and systems
• Perform daily, weekly and monthly routine checks for vehicle integrity
• Repair and replace any worn consumables such as brake pads and wheel bearings
• Work directly with the Electrical, Software and Safety Engineers to ensure the vehicles are operated in a safe and reliable manner

What we require from you

• Certified mechanic in Singapore
• Five years’ experience in automotive repair and maintenance
• Experience in electric vehicle automotive repair and maintenance
• Competent in diagnosing mechanical and hydraulic issues using standard service kits
• Competent in using diagnostics tools for troubleshooting electrical and electronic faults
• Inherent appreciation and understanding of vehicle safety

What we prefer from you

• Interest and / or experience with autonomous vehicles

What skills are we looking for

• Hands on skills and intuition to diagnose and rectify known and novel issues alike
• Strong communication skills with ability to work effectively as an independent mechanical technician and as a member of a multi-faceted team of engineers
• Ability to be flexible in order to support other parts of the business as required.
• Strong problem-solving abilities, attention to detail and reliability.
• Ability to work well and precisely in a time-constrained and pressured environment.

Authorities and Responsibilities

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have Secondary / NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 3 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.

Pratt & Whitney, an RTX business, is a world leader in the design, manufacture and service of aircraft engines and auxiliary power units for commercial, military and business aircraft. Through industry-leading businesses – Collins Aerospace, Pratt & Whitney, and Raytheon – RTX pushes the limits of technology and science to redefine how we connect and protect our world.

We are advancing aviation, engineering integrated defense systems, and developing next-generation technology solutions and manufacturing to help global customers address their most critical challenges. Make a difference with a career at Pratt & Whitney.

What You Will Do

• Utilize machines/ equipment/ tools to carry out disassembly and assembly functions of engines, its associated modules, parts, components or accessories.
• Execute operation procedures within the cell based on Overhaul Maintenance Manual
• Solve technical issues and problems as appropriate when encounter in their daily work.
• Actively support and participate in EHS and Continuous Improvement and Ethics culture projects and any other corporate initiatives.
• Assist the Operations Leaders in their daily operations to achieve production targets, corporate goals and discipline.
• Carry out SAP transaction and make necessary changes to works order in SAP.

Qualifications You Must Have

• Minimum NITEC / Higher NITEC in Mechanical Engineering, Electrical Engineering or any other related discipline.
• Minimum 2 years work experience in engine disassembly/assembly or test in aviation industry.
• Able to display Continuous Improvement competencies.
• Self-motivated and able to work independently with a positive attitude towards change management.
• Good understanding of technical drawing.

Qualifications We Prefer

• Good working knowledge of MS Office applications.

What We Offer

• Career and skills development opportunities.
• Employee scholarship program for further education.
• Comprehensive health, medical and dental benefits.
• On-the-job training and in-house/external certifications.
• Competitive remuneration package.
• Allowance and overtime benefits where applicable.
• Company transport provided.

Learn More & Apply Now!

• Diversity, Equity & Inclusion fuels opportunity for our employees, customers and communities.
• Corporate social responsibility to lift up underserved communities, support the advancement of people, address climate change; learn about our Environmental, Social and Governance aspirations.
• Watch We Are RTX and We Stand Up for Inclusion videos.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry.

Responsibilities

• Utilize machines/ equipment/ tools to perform disassembly, inspect and assembly functions of engines, its associated modules, parts, components, or accessories.
• Read and execute the standard operating procedures (SOP).
• Solve technical issues and problems as appropriate when encounter in their daily work.
• Assist the Operations Leader/ Assistant Foremen/ Cell Leaders in their daily operations to achieve production targets, corporate goals and discipline.
• Carry out SAP transaction and make necessary changes to works order in SAP.
• Carry out proper documentation.
• Actively support and participate in EHS, Continuous Improvement, ethics culture projects and any other corporate initiatives.
• Carry out any other duties as assigned.

Requirements

• NITEC or Higher NITEC in Mechanical Engineering or other related engineering disciplines.
• 2 years relevant experience in engine disassembly/assembly/inspection or testing. Open to consider candidates with no experience with keen interests to pursue a career in aerospace industry.
• Good understanding of technical drawing such as Engine Manuals.
• A curious and learning mindset – we provide on-the-job trainings and certifications.
• Internal applicant must be in current grade for at least 2 years prior to higher grade application.
• Self-motivated to work independently with a positive attitude towards change management.
• Good team player with strong communication and interpersonal skills.
• Good working knowledge of MS Office applications.
• Commit to work on rotating shifts (Day & Night) and overtime on need basis.
• Relevant technical experience in Engine MRO or Aerospace industry is a plus.

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide company transport from Pasir Ris MRT station.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”.

• Ensuring the required materials are available for production
• Inspecting machinery and reporting any faults to management and workers.
• Identifying faults and troubleshooting wherever possible.
• Analyzing performance and products
• Establishing high-quality standards and ensuring they are implemented by workers.
• Implementing preventative maintenance methods.
• equipment maintenance

Production Technician Requirements:

• High school diploma or similar.
• Knowledge of production required.
• Experience in manufacturing would be advantageous.
• Problem-solving skills
• Excellent written and verbal communication skills.
• A positive attitude and willingness to work overtime when required.

Job Description

• Inspect and repair passenger seats, galleys, and lavatories and maintain aircraft conditions
• Install cabin interior components into commercial aircraft, including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain luggage storage area in a neat and organized manner
• Maintain inventory items required for handling the cleaning activities
• Maintain the quality of the aircraft interiors on the operated fleet
• Maintain the interior and exterior cleaning standards on the operating fleet
• Perform other duties as assigned by your superior

Job Requirements

• Minimum 'O' Level / Nitec in engineering or equivalent.
• No working experience is needed
• Able to communicate effectively verbally in writing in standard English.
• Ability to perform tasks in high-noise areas and work at height
• Able to work rotating shifts, including weekends and public holidays.
• Candidate must attend a 6- to 9-month Cabin Trainee Technician course (including On the Job Training) with assessment. Only those who pass the assessment will be offered employment for the role.

Job Description & Requirements

• Work closely with the local departments, and adapt to changing priorities with guidance from senior team members.
• Work with specimens maintained at varying temperatures (ranging from ambient to cryogenic), including the limited movement of shipper boxes filled with dry ice.
• Perform receipt, QC checks, labeling and onward processing of clinical trials specimens.
• Specimens Accessioning: Perform accurate data entry into various laboratory information management systems
• Specimen Storage: maintain full inventory and tracking of storage specimens while ensuring the integrity of the specimens at all times
• Specimen Shipping and Disposals: prepare specimens for real-time and scheduled onward shipment to other referral laboratories. Process specimens marked for disposal.
• Raise and resolve specimen management-related queries with other departments.
• Perform housekeeping to maintain a clean and tidy working environment, including basic freezer maintenance and disposition of waste.
• Support monitoring of cold storage units and environment.
• Utilise study documentation to aid in problem solving and escalate to senior staff as required.
• Manage specimen-related study documentation including archiving
• Monitor and maintain consumables inventory.
• Perform all processes in accordance with SOPs and appropriate regulatory guidelines including Good Clinical Practices (GCP) and IATA
• Perform other duties as assigned

Requirements:

• Minimum Higher Nitec or Diploma in arelated field
• Excellent communication skills
• Exceptional documentation and data entryskills
• 5-day work week including Saturday
• Willing to learn, positive attitude and mustbe a team player
• Trained in IATA Dangerous GoodsRegulations (DGR) would be advantageous
• Salary will commensurate with experience

As Technician, you’ll be assisting the Shift Engineer or Assistant Chief Engineer in managing the engineering/maintenance of your hotel and ensure the safety and comfort of hotel guests and team members.

A little taste of your day-to-day

Every day is different, but you’ll mostly be:

• Assisting the Shift Engineer with the design of a preventative maintenance program
• Carrying out minor repairs at guest rooms or public areas
• Responding to requests from departments regarding minor maintenance issues throughout the day
• Liaising directly with departments regarding the completion of work orders and prioritize in order of guest satisfaction
• Completing work orders assigned by the Shift Engineer or Chief Engineer
• Conducting daily inspection and rectification of all public areas
• Ensuring pool chemical level is in accordance with legislative requirements and surrounding areas are maintained to standards established
• Handling duties as an Emergency Respond team member during fire, Bomb-threats and any emergency cases in the hotel

What we need from you

• A minimum Professional Certificate/ NiTEC/ Diploma in Engineering
• At least 1 years of relevant work experience
• Able to work rotating shift hours over weekends and public holidays
• Proactive and have an eye for details
• Self-motivated and hardworking individual
• Team player who works effectively in a team environment

What you can expect from us

We give our people everything they need to succeed. From a competitive salary that rewards all your hard work to a wide range of benefits designed to help you live your best work life – including a full uniform, impressive room discounts and some of the best training in the business.

Our mission is to welcome everyone and create inclusive teams where we celebrate difference and encourage colleagues to bring their whole selves to work. IHG Hotels & Resorts provides equal employment opportunities to applicants and employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, protected veteran status, or disability. We promote a culture of trust, support, and acceptance. Always welcoming different backgrounds, experiences, and perspectives.

IHG gives every member of the team the room they need to belong, grow and make a difference in a collaborative environment. We know that to work well, we need to feel well – both inside and outside of work – and through our myWellbeing framework, we are committed to supporting wellbeing in your health, lifestyle, and workplace.

So, join us and you’ll become part of our ever-growing global family.

Job Description

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

Job Summary

Laboratory Technician reports to the Laboratory Manager and supports laboratory operations by:

• Carrying out standard laboratory tests.
• Assisting more senior laboratory technicians in carrying out non-standard laboratory tests.
• Preparing and cleaning up test settings within time, budget and quality requirements.
• Working within clearly defined standard operating procedures.
• Works with close supervision.
• Requires preparatory vocational education (VMBO) and limited prior relevant training or work experience.

About the Role

• Carry out laboratory tests and provide results of the soil samples taken from onshore or offshore.
• Assist project manager and engineers with onboard routine test result and data processing.
• Ensure traceability and proper handling of soil samples.
• Mobilise and demobilise equipment for projects.
• Perform inventory and maintenance checks.
• Ensure the process conforms to customer, statutory and management system requirements.
• Perform other laboratory related operations as and when required.
• Perform routine laboratory tests on vessel during offshore soil investigations.

About you

• Diploma in Civil Engineering / G.C.E. “O” or “N” Level or equivalent.
• Relevant experience in soil testing industry.
• Good analytical ability, organisational and time management skills.
• Self-driven, possess excellent team spirit and good interpersonal skills.
• Preferably proficient in MS office applications.
• Willing to work on vessel for offshore site investigation work.
• Willing to travel to other countries for work purposes as and when requested by the company.

Duties and Responsibilities

· Operates high tech equipment to ensure meeting production output with high yield and good quality.

· Perform 1st level troubleshooting of any faults

· Perform basic maintenance and repair jobs on equipments

· Assist Engineers to ensure proper process records are maintained

- Assist engineering / operations team members in the shortest time to resolve problems and ensure long term continuous improvement for yield improvement and cost saving project, wherever possible

· Provides guidance and work leadership to less experienced Technicians / Operators

· Interfaces with other colleagues concerning quality and assure that effective corrective action or improvement is implemented

· Quality checks using magnifying equipment / glass

· Hands-on operation role and also to assist / stand in for operator’s role

· Any other ad-hoc work as and when assigned by Supervisor / Managers

POSITION SUMMARY:

The Engine Technician, Engine Services Division (ESD) Operations is directly responsible to Head of Business Unit, ESD.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Remove and install engine components onto the engine/ module off-wing or on-wing
• Perform troubleshooting, modification, and maintenance work off-wing or on-wing
• Work performed using prescribed tools and equipment in accordance with approved technical data and relevant documents
• Compliance of work to all relevant statutory, company regulations and standards operating procedures in ESD and SIAEC
• May be assigned to perform boroscope inspection
• May be assigned to work in engine shop environment or in field on-wing environment (including short-term deployment overseas to support Aircraft on Ground situations)
• Any other tasks as assigned by superiors

REQUIREMENTS:

• Minimum NITEC in engineering and above
• Minimum of 2 years’ experience in aviation industry (experience in engine shop environment preferred)
• Good understanding of airworthiness regulations and requirements e.g. FAA, EASA, CAAS and other NAAs
• Experience and good understanding of QMS, SMS and AS9100, OHS45001
• Capability or prior experience and training in Boroscope Inspection, Boroblend would be an added advantage
• Familiarity of inspection methods, techniques and equipment would be an added advantage
• Knowledge of problem resolution tools and LEAN will be advantageous.
• Must be able and willing to work on shifts
• Familiarity with Microsoft Word, Excel and Outlook will be advantageous.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Candidates are not required to pay SIA Engineering, any Agents, or Sub-Agents representing the organisation a recruitment fee or other fees relating to their application / employment.