JOB ROLE

· React actively in recovery of daily machines & accessories breakdown (MB down time)

· To carry out tasks in facility infrastructure repair & maintenance (Aircon, building, drainage,

flooring, roof top, etc)

· To perform preventive maintenance program on facilities & machineries

(Compressor, cooling tower, molding machines, etc)

· Carry out effective trouble shooting & rectification actions during repair & maintenance task

· To perform molding machine screw cleaning upon request

· To perform repair tasks on accessories upon request (Machine fault, hot oil controller, water controller, chiller, crusher, matrial hopper, etc)

· Perform facility & maintenance recording for traceability needs

· Monitoring & escort external sub-con in carrying out repair & maintenance tasks within company premise

· Carry out all repair & maintenance tasks in safe order

• Perform preventive and corrective maintenance on Ground Service Equipment and projects works where required
• Liaise with Stores to resolve any matters pertaining to spares
• Preparing and submitting relevant paperwork

KEY REQUIREMENTS

• Nitec or Higher Nitec qualifications in Automotive (Light vehicles) / Automotive (Heavy vehicles) or equivalent
• Preferably 2 years of relevant work experience
• Class 3 driving license required
• Comfortable with working on rotating shifts
• Joining Bonus of $5000
• Terms and Conditions apply

RESPONSIBILITIES

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

Job Description

• Technician is require to perform visual and NDT inspection.
• Perform manual/mechanical/chemical cleaning.
• Applicants must be able to meet near vision (either one Tumbling E, 20/25 Snellen, Jaeger No. 1) & color perception requirements.
• Knowledge and experience in chemical/mechanical cleaning preferred.
• Must be able to interpret results and generate reports on findings
• Must be able to work closely in accordance with Standard Operating Procedures, Data cards, Engine Manual, process controls to achieve the highest quality of work.
• Assist team to manage production per daily operational requirement
• Tasks mentioned above will not be suitable for candidate with medical history related to skin problem, asthma, joint pain, arthralgia & bone fracture etc.

Qualification/Experience

NAS410 Certified (Aerospace Sector) would be an advantage. Posses minimum 2 years of NDT experience as a level ll in (PT,MT,UT,RT & ET). Good reporting writing skills Strong interpersonal communication skills. Attentive to details and meticulous in work. Able to interpret, read and understand Engine Manual and Standard Operating Procedure.

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform Non-Destructive Testing and its related duties in accordance with the written instructions and specific calibration requirements.

Essential Responsibilities:

• Perform specific calibrations, NDT, and specific evaluations for acceptance or rejection of parts
• Correct interpretation and understand the inspection operation sheets and work instruction
• Organize, sort and prepare the parts for NDT inspection
• Load, unload, and operate either the real-time XR, UT or auto FPI line effectively
• Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets
• Ensure the equipment operation readiness always
• Assist the Engineer for any inspection evaluation and reporting
• Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents
• Prepare and clean parts before and/or after inspection
• Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements
• Perform scheduled maintenance & housekeeping tasks

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

Job Description

• Inspect and repair passenger seats, galleys, and lavatories and maintain aircraft conditions
• Install cabin interior components into commercial aircraft, including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain luggage storage area in a neat and organized manner
• Maintain inventory items required for handling the cleaning activities
• Maintain the quality of the aircraft interiors on the operated fleet
• Maintain the interior and exterior cleaning standards on the operating fleet
• Perform other duties as assigned by your superior

Job Requirements

• Minimum Higher Nitec or Diploma in Engineering/Aviation.
• No working experience is needed
• Able to communicate effectively verbally in writing in standard English.
• Ability to perform tasks in high-noise areas and work at height
• Able to work rotating shifts, including weekends and public holidays.
• Candidate must attend a 6-month Cabin Trainee Technician course (including On the Job Training) with assessment. Only those who pass the assessment will be offered employment for the role.

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is one of the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• One of the world’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About this role

This traineeship is an opportunity for aspiring individuals who are keen to join aviation industry but do not meet the pre-requisites as a trained aircraft engine technician. Upon successful completion of the program, a career as a qualified aircraft engine technician awaits you.

About the Traineeship Program

· The program involves a fully-sponsored training program with monthly allowance over the one-year training period.

· The program encompasses initial company familiarisation, classroom training and on-the-job training.

· The initial familiarisation in SAESL provides an insight to the working environment prior to attending classroom training.

· The three-month classroom training, consisting of theory and practical sessions, will be conducted and assessed by an external training academy.

· The nine-month on-the-job training in SAESL provides the opportunity to learn and work on the renowned Rolls-Royce Trent Engines.

· Upon completion of the training, the qualified aircraft engine technician will serve a bond with SAESL.

Requirements

Interested applicants must meet the following pre-requisites:

· NITEC / Higher NITEC / Diploma in Engineering (eg. Aeronautical/ Avionics/ Mechanical/ Mechatronics/ Manufacturing/ Electrical/ Precision)

· Completed full-time National Service

· Required to work on rotating shift work

· Willing to work in Changi

Location: 39 Changi North Crescent Singapore 499642

Entity: Goodrich Aerospace Pte Ltd (MRO Site)

Specific Role Responsibilities:

• Perform work at cell level to meet the production schedule.
• Assemble, disassemble, perform minor cleaning, inspect, troubleshoot, install & repair wiring and test in accordance with Component Maintenance Manual.
• Promptly resolve issue and ensure all repair cost estimates are updated accurately.
• Work in close cooperation with supervisor and other support personnel to resolve problems as when necessary.
• Adhere to Quality Management System (e.g. AS9110C / Airworthiness Part 145 requirement)
• Understand the use of common measuring equipment like torque wrench, calipers, micrometers, bore and depth gauges.
• Complies with all Environment, Health & Safety policies, and regulations
• Complies with all US and Singapore Export Control Regulations
• Actively participate in process improvement and environmental, health and safety activities.

Requirements

• NITEC/Higher NITEC/Diploma in Engineering (Mechanical / Mechatronics /Electronics/ other Aerospace related courses)
• Personnel with passed in Air legislation CAAS/ EASA papers L12/ L11/ M10, or other industry related qualifications would have added advantage.
• Preferably with degree or diploma in engineering.
• Ability to read, write and understand English.
• To read and work from technical and service manuals, technical orders, sales orders, specification, drawings, and other written instructions.
• Computer literacy (Knowledge in SAP will be preferred).
• Good communication skills needed, both oral and written.
• Candidates with no prior aviation experience are also welcomed to apply (Training will be provided)

Job purpose:

The Product Service Technician will work through tasks for specific product line scopes in the form of job cards. Tasks include cleaning, disassembly, servicing, greasing, assembly, and function testing, of mechanical and electrical systems on a marine craft. This includes diesel engines hydraulic, and networked systems. Some degree of fault finding, reporting of progress, and defects will be expected using an extensive range of engineering and operational skills/methodology.

Once the maintenance scope is completed craft will be returned to an operational state to the customer whilst another cycle kicks off.

Your principal accountabilities and other tasks will be carried out in the framework of our valued behaviors:

· Pioneering spirit: You will respond innovatively to our customers’ current and future needs. You will be entrepreneurial and think creatively to solve difficult problems. You will challenge conventional thinking and find better ways.

· Integrity: You will strive to do the right thing. You will treat everyone as you would like to be treated, creating relationships based on trust and fairness. You will collaborate by listening respectfully and speaking honestly.

· Energy: You will go above and beyond, delivering exceptional results to all stakeholders. You will take pride in making a positive impact and making the right decisions quickly.

· Resilience: You will be accountable and courageous and face up to difficult situations. You will be tenacious in the pursuit of the company’s purpose. You will see feedback, you will learn, and you will develop with your team.

At all times you will adhere to, and promote James Fisher and Sons plc's Health, Safety, Environment, and Quality standards in addition to Life Saving Rules.

Principal Accountabilities:

· Be available to report for duty at Changi Naval Base/JFD workshop in accordance with task planning.

· Supervise and conduct the planned maintenance and defective technical activities for the marine systems in accordance with approved technical manuals, plans, and procedures. An ability to read technical drawings and procedures.

· Applying knowledge and experience to delegated maintenance tasks.

· Attention to detail while working across a range of tasks and systems.

· Accurate reporting and planning to support production scheduling. Must display good time management.

· Professionalism displayed is the conduct, behavior and attitude. Maintain a productive working relationship with the customer.

· Ability to work independently without supervision when under stressful situations.

· Demonstrate a willingness to participate in the Company’s Quality Management System

· Demonstrated commitment to following safety procedures and upholding a positive safety culture.

· Assist in maintaining and keeping up to date a technical library of publications, manuals, procedures, and drawings as appropriate. Reporting of discrepancies.

· Develop, regularly review, and maintain risk assessments and safety-related documentation of the system.

· Assist the Project lead with the planned maintenance and defect rectification activities.

· Liaise with the Project Lead in respect of all QA and Safety issues.

· Apply strong leadership and communication skills to influence and enforce a positive safety culture.

· Any other tasks as reasonably requested by the Project lead.

· Performing functional checks on the craft while deployed in test basin.

Accountabilities are not a list of tasks and activities carried out, but are concerned with the reasons why these tasks are undertaken, i.e. WHAT is required of it rather than HOW a job is to be done.

Typically, there will be between 4 and 8 Principal Accountability statements for each job. If there are more than eight it is likely that tasks are being listed. Less than four suggests accountabilities are being grouped together, or the design of the role may need revisiting.

Knowledge, experience and skills required:

The role will require a broad base of experience in the engineering, marine, and associated industries including the following:

· Recognized technical qualification such as diploma-relevant subject.

· A minimum of 5 years’ experience in mechanical/electrical system maintenance, operations and troubleshooting.

· A minimum of 5 years’ experience in pneumatic/hydraulic/marine disciplines

· Medically fit to be deployed and work onboard a ship which will involve working in small spaces and lifting and moving equipment.

· Excellent written and verbal communication skills.

Demonstrate the willingness to participate in the Company’s Quality Management system and undertake auditor training and functions across the Company.

Authorities and Responsibilities

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have Secondary / NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 3 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.

Job Description Summary:

- To maintain all different production equipment to generate the best desired output, overall equipment effectiveness, mean time between failure and mean time to repair.

Responsibilities:

-Production machinery and equipment maintenance • Maintain and repair all different production equipment to generate the best desired output, Overall Equipment Effectiveness (OEE), Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR)

- Troubleshoot in accordance with the checklists, monitoring procedures, mini specification, and any engineering instructions in compliance with customers’ requirement and internal quality standards.

- Perform real-time equipment troubleshooting, repair, calibration and conduct periodic and non-periodic equipment preventive maintenance

- Manage spare part inventory and maintain the production facility clean and safe. • Ensure that materials are used and handled appropriately to avoid scraps

- Perform daily 5S housekeeping and Total Productive Maintenance (TPM)

Requirements:

- Diploma in Mechanical/Electronics/Mechatronics Engineering or equivalent

- Entry level candidate are welcomed to apply as training provided.

- Able to work on 12 hours shift.

- Manufacturing experience would advantage.

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Job Description

Reporting to Projects & Continuous Improvement Manager, the Accountant plays an integral role in Finance Division in ensuring projects align with company-wide continuous improvement initiatives and Finance Division roadmap.

Responsibilities

· Responsible for hardware and software setup assisting with installation / deployment of laptops, printer and other IT equipment including resolve issues encountered by users.

· Point of contact between IT Departments of the company and the Business Divisions

· Responsible for and co-ordinates IT-related administrative matters of the Division, including but not limited to:

- User Account Management:

1. Manage user accounts, permissions and access rights in various systems and applications.

2. Ensure Staff on-boarding and offboarding processes are executed efficiently.

- Regular reviews on user access and controls

- Annual DR Exercises

· Initiate, support and monitor systems and continuous improvement projects for the Division and ensure it aligns with company-wide continuous improvement initiatives and Finance Division roadmap.

· Be involved in digitalisation projects through process simplification, introduce concepts like report automation, process automation like RPA.

· Engage key finance business stakeholders, collect requirements and translate into tender or user requirements specifications.

· Undertake any other ad-hoc projects or tasks as assigned by management.

Requirements

· Information Technology (IT) or related Diploma or Degree and with at least 2 years of relevant experience

· Applicant with prior experience in system design and analysis knowledge will be an added advantage.

· Good communications, problem solving and project management skills.

· Good team player, self-motivated with positive working attitude

· Able to multi-task and prioritize in a fast paced and high-volume environment or ambiguous situations.

Responsibilities:

• Maintain of machinery & facility maintenance records for traceability needs
• Maintaining of air conditioning, electric power, plumbing and lighting system, cleaning, decoration, grounds, building keeping and security of building surroundings.
• Responsible in overseeing all aspects of safety to ensure compliance to the Workplace and Health Act and other safety related statutory legislations.
• Conducting audits in facilities on relevant risks and support and work with facilities to mitigate these risks.
• Maintaining comprehensive records and reports on safety and environment management activities.
• Monitor and escort external sub-contractors in carrying out repair and maintenance works within Company’s premises
• To react actively in recovery of daily machineries & accessories breakdown (To be efficient with least MB downtime)
• To provide support in daily mechanical, electrical or air-conditioning preventive maintenance works inclusive of building maintenance
• Plan, schedule and perform of preventive maintenance program on machinery & facility (Compressor, cooling tower, air-condition, etc)
• Attend to all break downs or complaints promptly and to perform investigation and rectification works
• Ensure all works are carried out safely and in accordance
• Work closely with purchaser to be cost efficient for repair and maintenance tasks

Requirements:

• Possess at least a Professional Certificate/NiTEC, Engineering (Industrial), Engineering (Metal Fabrication/ Tool & Die/ Welding), Engineering (Mechatronic/ Electromechanical) or equivalent;
• Min. 2 years of relevant working experience preferred;
• Candidates holding an Electrician’s license and prior relevant working experience in medical molds industry will be an added advantage.

Job Responsibilities

• To assist Engineer in collecting & compiling data for problem analysis
• Carry out basic troubleshooting & maintenance on machine
• To attend to production ‘First Defect Stop’ system on day to day issues
• Able to provide basic training to team leader / operator on machine or ‘First Defect Stop’ System
• At time to liaise with external supplier on simple improvement in machine
• To attend to any adhoc job if required

Job Requirements

• NITEC in Mechanical / Mechatronic / Electrical / Electronic or equivalent
• Prior experience working in a manufacturing environment
• Able to tabulate data and charts using Microsoft Excel
• Able to work independently with minimum supervision
• Able to perform 12 hours rotating shift work

Job Description

Key Responsibilities

1. Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.
2. Uses escalation policies as required to keep management informed of down situations.
3. Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.
4. Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.
5. Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.
6. Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.
7. Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.
8. Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Position Summary :

The Systems Engineering Manager is first and foremost a team manager and responsible for leading his team to the completion of engineering tasks within committed budgets, schedules and performance for successful bid and project delivery, through well-executed Work Package Management.

As such, the Systems Engineering Manager is responsible for his/her and his/her team’s completion of a set of engineering tasks within the committed cost, schedule, performance and quality.

To achieve this goal, he/she identifies the required skills, allocates responsibilities to the various individual contributors and leads these contributors as a team. For the team, he/she schedules, coordinates and monitors the implementation of tasks. The related tasks may cover the whole range (from research and advanced studies up to IVVQA) of system engineering activities.

The Systems Engineering manager is in charge of tasks focused on data and documents covering part or all the range of activities regarding customer needs, solution architecture, mission, function, architectural design, life cycle of the solution / product, requirements and specialty engineering

Situation in the Organization :

This System Engineering Manager member of the Engineering team, reports functionally to the Engineering Manager and operationally to the Project Manager.

He interfaces with Technical Directorate from the Business Line.

He coordinates the technical activities between the different Thales entities.

He is the technical interface with the customer.

Context :

• Communication System for Rail Transportation Domain
• Large project requiring multiple international entities.

Main Tasks & Responsibilities :

The Systems Engineering Manager responsibilities are as follows, he/she::

• Provides technical & engineering leadership on bids and projects;
• Leads his team in performing all engineering activities with a Lean engineering mindset and methodologies (in particular pulled flow, set-based design, Kanban / limited WIP, Kaizen, and Obeya), and implementing co-engineering wherever appropriate;
• Builds the overall solution strategy after understanding the solution’s needs;
• Ensures System Engineering activity management within constraints provided by approved architecture and design policy;
• Secures the engineering scope, plans and coordinates the whole system engineering activities within the constraints provided by the agreed architecture and design policy in order to satisfy customer requirements and ensures global development consistency;
• Defines the engineering’s PBS, WBS, OBS and associated tasks, tailors development process and ensures achievement of the development baselines (functional, allocated and product);
• Defines the Product Reuse Strategy, contributes to Product Line Development Strategy and updates the bid/project by proposing upgrades thanks to product enhancements;
• Manages Risks & Opportunities of design and development during bid phase, guarantees programme commitments, including those flown down to subcontractors and partners;
• Optimises technical work against costs, schedule and risks from design to validation and acceptance of the solution;
• Implements the decisions and actions coming from the Complexity Profiler analysis;
• Defines and tailors the engineering environment suitable for the Bid or the Project;
• Understands the engineering requirements for relevant bid/projects and schedule, and allocate Work Packages to relevant engineering employees for completion, and provides the Statements of Works for all internal and external subcontractors;
• Monitors and coordinates technical and engineering activities are to carried out in accordance with contract and company quality system requirements;
• Supports the implementation of reviews to ensure review objectives are met;
• Provide technical & engineering leadership on bids and projects.
• Provides technical input for Business Development activities in the Security, Transport and Defence market through participation in customer meetings and workshops and identifying business opportunities;
• Liaises with the Sales and Bid management teams in the preparation of proposals, and directly with client representatives in determining their requirements;
• Participates in bids (or changes/evolutions of a project) by leading the development of the technical solution for Security, Transport and Defence opportunities and providing estimates for the solution;
• Leads the technical activities on projects by providing leadership on the development of the technical solution, planning, implementation and rollout of the solution;
• Provides direction in priority and resourcing needs for engineering support activities on bids and projects;
• Acts as the technical interface on technical issues with customers responding to queries and providing technical solutions;
• Provides the leadership of the change control board, making informed decisions on changes and management of the entire development environment;
• Provides metrics and analysis on progress of systems engineering activities (Obeya);
• Ensures all designs are approved by the Design Authority;
• Produces technical reports as required by the Bid or Project Manager;
• Capitalises lessons learned and relevant project data and metrics;
• Effective Manages people management effectively, including participation in the professional development of technical employees in line with the business strategy;
• Manages the skills and competencies of people on his team – including himself – in particular in view of requirements of an Authorised Engineering Organisation according to Competency Management Policies.

The Systems Engineering Manager also contributes to the following activities:

• Assure the RAM, Safety and Security (as appropriate for the domain / project / bid), providing input into defining and implementing RAM & Safety assurance and making sure that the RAM, Safety and Security assurance activities are conducted;
• Prepare production: Manage the availability of production equipment and tooling, develop the processes, adapt or procure the production and test equipment and tools;
• Participate in the production’s first article inspection (FAI) and the Internal Product acceptance
• Prepare the delivery of Customer Services: validate the objectives of the Reliability, Availability, Maintainability and Testability studies, perform Reliability, Availability, Maintainability, Testability (RAMT) studies, prepare the operations of the system;
• Manage the configuration of the system: create and approve baselines, perform configuration audits.

The Systems Engineering Manager may be asked to assume the following Roles: IVVQ Manager, Service Engineering Manager, and Configuration Manager.

Pre-requisite :

QUALIFICATIONS

• Tertiary qualification in Computer Science, Information Technology, Electronics Engineering or related discipline (essential)
• Higher degree qualifications are desirable.
• Demonstrated engineering competencies required for qualification to INCOSE CSEP/ESEP (or equivalent, CSEP as a very minimum) are highly desirable
• Experience working on Transportation projects
• Experience working within a Systems Engineering lifecycle

ESSENTIAL EXPERIENCE

• Minimum of 10 years’ experience in a Senior Engineering role
• Experience in managing multi-disciplinary teams
• Experience in managing multiple small projects simultaneously
• Strong oral and written communications & liaison skills.
• Membership of relevant professional organisation, e.g. INCOSE, Institution of Engineers Singapore, etc.

DESIRABLE EXPERIENCE

• Experience in a project management or a systems delivery management role.
• Knowledge of Thales Products and Processes

Service Technician required to work on a wide range of NOV Manufactured equipment including Pressure Control Equipment. Zoned certified Diesel engines and Winch units. Must be able to read technical drawings and follow detailed engineering procedures.

Job Description

• Familiar with the standard products of the Company and be fully conversant with the assembly drawings and Bill of materials
• Ensure products are assembled in accordance with approved drawings and specifications
• Complete all service-related documentations, including service reports, work orders & assembly data sheets
• Proficient in using all components, equipment, tools and techniques used in the workshop
• Reporting observation of any mistakes, omissions or alterations necessary to drawings or bills of materials

Job Requirement:

• Preferably 2 years working experience in a workshop environment or with servicing of oilfield equipment.
• At least 2 years' Mechanical experience on diesel engines and pressure testing
• Ability to read complex engineering drawing
• Proficient in the use of small tools
• Computer literate and competent with Microsoft Office
• Diploma or minimum Higher NTEC or NTC2 or 3
• Candidate requires to travel for onsite field work at customer locations and offshore installations

About The Role

As a Certifying Trainee Technician (CTT) in SIAEC, you will undergo a structured 28-month program to be certified as a CAT A Certifying Technician with SIAEC.

Responsibilities

Upon completion, the trainees will be appointed as a Certifying Technician, which permits the holder to issue certificates of release to service following minor scheduled line maintenance and completion of simple tasks in line and base maintenance.

Qualifications/Requirements

• Diploma in Mechanical, Aeronautical, Electrical and other related engineering courses
• Recent graduating Poly graduates are welcomed
• Strong interest in technician role within Aviation industry
• Positive and hardworking personality
• Must be able to differentiate colors for work purposes
• Physically Fit

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)