Reporting to Centre-IC, Medical Technologist (MT) is responsible for the daily operations and administration of laboratory to ensure compliance to regulations and accreditation standards. This includes daily routine laboratory work, performing phlebotomy, electrocardiogram and spirometry. MT is responsible to maintain professional care to patients and works closely with NUP and other stakeholders.

Job scope

• Perform patient registration, specimen reception, preparation and packing of specimens
• Perform laboratory analysis (e.g. Urine microscopy, full blood count, HbA1c), operate and maintain instruments according to work instruction.
• Perform point-of-care testing, phlebotomy, ECG and spirometry procedures.
• Responsible to verify and report accurate results in timely fashion; investigates and reports any anomalies.
• Responsible to perform daily quality control check and troubleshoot as required.
• Ensure proper documentations and records for traceability (e.g. acknowledgement on QC and maintenance checklist after completion).
• Assist to resolve patient’s queries and escalate to centre-IC when necessary.
• Adhere to work safety guidelines and infection control protocols to ensure staff and patient safety.
• Assist centre-IC in tasks as assigned.

Qualification

Degree in Medical Laboratory/Biomedical Science or related fields.

Prior experience working at clinical laboratory at public or private healthcare establishment is advantageous but training will be provided

Experience in phlebotomy and heel prick sample collection will be advantageous but training will be provided

Effective communications and ability to converse in vernacular languages is an asset

Able to work in a fast-paced environment and with good problem solving skills

Possess positive attitude in resolving hostile and disgruntled patients professionally

Ability to multi-task and work under tight timelines

Good interpersonal relationship skills and enjoy working as a team

Computer literate – knowledge of MS Word, Excel and PowerPoint will be advantageous

Note : Candidates who are looking for Full Time/Part Time employment are welcome to submit the job application to us

Patient Service Associates (PSA) provide frontline counter services to patients. PSA is to assist patients by checking patient’s service/order requirement, managing patient queues, handle basic enquiries (e.g. appointment booking) and to provide administrative support to medical technologists and radiographers.

Job Responsibilities:

• Responsible for reception of all appointment and walk-in patients at the Diagnostics counters
• Ensure 2 patients’ identifiers (NRIC & Name) are verified for all patients when handling patient registration electronically (i.e. EPIC, LIS, RIS, POS, BSS.) and verifying tests ordered by doctors.
• Accurate appointment scheduling / booking and registration for eligible mammogram patients via Breast Screen Singapore (BSS) portal
• Registration of mammogram patients are done accurately via BSS portal, including updating of patient particulars such as mailing address and contact number.
• Relevant instructions are communicated effectively to patients prior to their procedures/tests, chaperon patients to changing or counselling room where applicable.
• Handle enquiries and provide prompt and courteous service delivery to internal and external customers.
• Responsible for payment collection when assigned to cashier duties and ensure tally of end-of day sales with cash settlement and other transaction records.
• Ensure Medisave Authorization Forms (MAF) are filled in accurately with patients’ endorsement and approval, and all Medisave transactions are captured accurately in EASIPOS
• Accurate application of promotions and discount vouchers appropriately and to validate its utilization via EASIPOS
• Support administrative function to centre in-charge including but not limited to dispatching of lab and x-ray reports, proper record and documentation of courier services.
• Performing duties as assigned by reporting officer
• Meet customer service and quality KPI as determined by department
• Follow up and support reporting officer in handling patient relation issues
• Adhere to policy and standard operating procedure
• Accurate and meticulous in performing cashiering duty when assigned

Job Requirements:

• GCE “A”/ “O”/ “N” levels or Higher / NITEC qualification
• Service-oriented and patient-focused
• Proactive and resilient with the ability to work independently and in a team
• Ability to multi-task and work in a fast-paced environment
• Good writing, interpersonal and communication skills
• Aspire for service excellence and process improvements

Additional Information:

Working Hours : 42 hours/week (5.5 days work-week)

Working Location : NUHS Diagnostics Clinics (within National University Polyclinics at the Western region of Singapore)

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

.Job Description

• To carry out maintenance and repair to ensure equipment are in good working conditions and quality
• Maintaining of records and repair activities
• Basic plumbing installation knowledge
• Perform other tasks as assigned by the Management

Job Requirement

• Candidates without experience but possess the right attitude will be considered
• Possess Class 3 licence
• Able to work independently
• Responsible and able to work in a team
• Good interpersonal
• Plumbing knowledge will be an advantage

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

Job Responsibilities:

• Responsible for deployment, maintenance, upgrade, and support of ICT infrastructure, including but not limited to:

-Firewalls

-Network

-Windows Servers

-Virtualization (VMWare/Hyper-V)

-Storages

-Backup Solutions

-Microsoft 365

-Microsoft Azure

-AWS

• Responsible for customers’ power maintenance, upgrade of firmware and patching of systems.
• Ensure continuous delivery of IT services through oversight of service level agreements with business users and monitoring of IT systems performance.
• Manage the IT Asset Management including hardware and software license management.
• Be prompt and meticulous in updating of daily incidents handled into the incident management tool.
• To be highly customer-focus and diligent towards providing good customer service.
• Other duties such as annual DRP/BCP test and other tasks assigned.
• Responsible in project implementation and migration for client’s infrastructure upgrade or new start-up environment.
• Perform end-to-end service delivery to meet the clients’ requirements on implementation, maintenance and support the infrastructure systems.
• Responsible on infrastructure project which include understanding user requirement, solutioning, conduct UAT, implementation and run live.
• Responsible for supporting and implementing both IT and Cloud infrastructure.
• Able to work independently with minimum supervision and work as team when required.

Job Requirements:

Experience:

• Diploma/Bachelor of Science in Computer Science/Computer Information System or equivalent.
• Minimum 1 year of experience, System Integrator environment preferred.
• Proven experience in IT support services field.
• Practical skills and experience in the following:

-Firewalls

-Network

-Windows Servers

-Virtualization (VMWare/Hyper-V)

-Storages

-Backup Solutions

-Microsoft 365

-Microsoft Azure

-AWS

• Understanding on network and server fundamentals.
• Practical experience in effective time management, including ability to prioritize & multitask
• Demonstrated ability to apply IT in solving business problems.

Skills:

• Fluent in spoken and written English
• Excellent communication and project coordination skills
• Knowledge in Windows Server 2003/2008/2012/2016/2019 environments.
• Basic knowledge in networking switches and port management
• Capability of seeing the tasks assigned holistically, able to break-down the task in detail and follow-through end-to-end.
• Good communication as this role needs to handle internal and external customers.
• Service oriented engineer to internal and external customer.
• Ability to provide IT training and awareness to other department users.
• Microsoft/Cisco/ITIL foundation certification a plus.

The technician to be trained to perform basic on-line leak sealing of pipeline components, report directly to the operation manager during the on-job training (OJT) period. Trainee technician will be sent to attend Safety Course and trained to work in the Petrochemical OEM environment in Jurong Island or mainland Utilities, Pharmaceutical and the general manufacturing industries.

Job Overview:

We are seeking a skilled Calibration Technician to join our team. The successful candidate will be responsible for maintaining and calibrating automated PLC control panels, skid systems, and various instruments. The Calibration Technician will play a crucial role in ensuring the functionality and accuracy of instrumentation equipment, contributing to the overall efficiency of the organization.

Responsibilities:

1. Calibration and Testing:Conduct calibration, testing, and commissioning of automated PLC control panels and skid systems.
   Perform line checking, loop checking, and input-output checking using Process Meters.
   Repair, test, and troubleshoot faulty instruments, ensuring adherence to scheduled timelines.
   
2. Installation and Commissioning:Install, test, and commission new instrumentation equipment.
   Conduct air tube testing, termination on both field and panel, and ensure compliance with safety standards.
   Inject digital and analog signals (4-20mA, 0-20mA, and digital signals) as part of commissioning procedures.
   
3. Documentation:Prepare comprehensive documentation for all calibration, testing, and commissioning activities.
   Maintain accurate records of work performed, instrument status, and calibration schedules.
   
4. Professional Experience:Minimum of [X] years of experience as a Calibration Technician.
   Familiarity with designing software such as Pro-E, In CAAD centre.
   Completion of safety courses in building construction supervision and oil/petrochemical industry safety for supervisors.
   

Qualifications:

• Diploma in Instrumentation & Control Engineering from a recognized institution or ITE Graduate.
• Relevant certifications in calibration and instrumentation.
• Strong understanding of automated PLC control panels and skid systems.

Skills and Abilities:

• Proficient in using Process Meters and other calibration tools.
• Excellent troubleshooting skills for identifying and resolving instrument faults.
• Detail-oriented with strong organizational and documentation skills.
• Ability to work independently and collaboratively within a team.
• Good communication skills and a commitment to safety protocols.

Degree/Diploma in electrical automation or equivalent

Min. 1 year relevant site experience on marine automation and electronics

Good knowledge of computer networks and computer usage

Independent technical competence, can do overtime if necessary

Class 3 driving license preferred

Singaporean or Singapore PR & Can start work immediately

Key Responsibilities:

• Strategise and conduct specialist manpower planning in the cluster by working closely with the team on manpower discussions at the clinical service line, monitor the manpower for the future, map out specialty pipeline and identify instability in the workforce, basic analysis of adequacy of manpower, craft and document discussion meetings as well as track the progress of this work;
• Manage the full spectrum of the HR central resourcing of medical specialists from interviewing to on-boarding;
• Co-facilitate the Total Performance Management for clinicians at cluster level from data preparation, analysis and charting to calibration and specialist clinicians’ promotions;
• Keep abreast and work progressively on medical human resource related policies, make recommendations to ensure that they are relevant and in compliance with the regulatory requirements and are up-to-date with the healthcare climate changes;
• Provide professional advice on the interpretation of HR policies, procedures, legislation, manpower planning relating to clinicians;
• Provide supervision and coaching to the junior executives in the team to ensure the effective, efficient and professional delivery of HR plans, programmes, services; and
• Undertake projects/assignments which may be assigned from time to time.

Requirements :

• Minimum 5 years of relevant HR experience in business partnering. Candidates with more relevant HR experience will be considered for the Senior Manager’s position.
• Prior manpower planning experience is a must.
• Excellent interpersonal and communication skills.
• Team player, independent, resourceful and adaptable in a dynamic work environment.
• Digital savvy, analytical skills with proficiency in MS Excel tools for data analysis, building charts.
• Good numeric sense, meticulous and a strong problem-solver.
• HR Experience in healthcare sector, while not a pre-requisite, will be an added advantage.

Health Attendant

CSSD (Central Sterile Supplies Department)

Roles and Responsibilities

• Stationed in the Central Sterile Supplies Department, you will be deployed to different stations- decontamination, assembly, inspecting, wrapping and sterilization of the dental instruments
• Clean and wash dental instruments
• Sort, assemble, protect, pack and label the dental instruments sets according to the checklist
• Perform validation and sterility tests
• Operating of washer (disinfector)/ steam sterilizer
• Document and verify sterilization loads
• Store and issue sterile instruments

Requirements

• Minimum PSLE and above
• Candidates with no prior experience but keen to learn are welcome to apply
• CSSD experience will be an advantage
• Comfortable with handling heavy loads/items up to 7-10kg
• Comfortable with staggered shift duties (730am-5pm) / (830am-6pm)
• 
  

To Apply

To apply for this position, please email to: [email protected], and indicate the subject title as: Application for position of Health Attendant CSSD (Central Sterile Supplies Department)

We regret that only shortlisted candidates will be contacted. Thank you.