Roles & Responsibilities

· Supervision of workers and subcontractors on daily site activities

· Keep track of the site schedule to ensure works are on time

· Compliance to safe work procedures and maintain good house-keeping

· Ensure safety matters on site and quality of completed works

· Assist Project Manager in material and equipment acquisition

· Supervise site electrical installation.

· Confirm progress reports, monitor project activities

. Raise purchase requisition

· Liaise with Project Manager

· Prepare documents for electrical testing

· Rectify and repair electrical issues at site

· Prepare and submit tender quotations

· Submit progress claims, monitor project activities

· Project planning, execute resource management and control

· Co-ordinate with sub-contractors, suppliers and Consultants for Building Construction

Electrical Works

.To be in charge of task allocation, scheduling and worker training

· To ensure all the design/installation detail can be done according to site condition

· Site supervision and highlight to Project Engineer on the installation matter/changes

· Material calculation & Labor cost estimating.

· Liaising with resident technical officer and consultant when necessary

· Ensure workers’ safe work procedure.

· Arrange and monitor work progress

· Monitor project costing to ensure project to be completed within budget and on time delivery

1) Installations , Testing the water pumps & Control panels

2) Analyse the pump system operation and update day to day

3) Any emergency troubleshooting / Repairs respond in 2hours and rectify within 8hours

4) Attend the site Enquiries with customer

5) Prepere the calibrated equipment for Major pump and panel replacement works

Responsibilities:

• Provide technical support in process engineering to facilitate production operations.
• Advice, support and carry out machine acceptance tests, qualification, and validation of production processes and equipment.
• Lead or participate in the investigation, troubleshooting, and root cause analysis for various production events and equipment failures; ensure that all relevant CAPAs are completed timely.
• Ensure adequate preventive & predictive maintenance to reduce equipment failures while maintaining quality and productivity; ensure adequate spare part inventory to meet the critical maintenance requirement.
• Work with and supervise vendors/contractors to ensure installation, repairs, or maintenance works are carried out timely and with minimal disruption to operations.
• Ensure compliance with GMP, regulatory requirements, ISO standards, EHS standards, and other relevant policies/standards.
• Ensure workplace safety and be responsible for notifying Management in a timely manner of EHS/GMP deficiencies.
• Support plant automation, Industry 4.0, and digital manufacturing initiatives.
• Any other duties and responsibilities as assigned by the Manager.

Requirements:

• Tertiary education in Electrical/Mechanical Engineering
• Minimum 3 years of related experience as a manufacturing process engineer in a Cosmetic, Food, or Pharmaceutical Manufacturing environment
• Well versed in GMP
• Good experience in automation and Industry 4.0 plant will be useful for work.
• Good communication and interpersonal skills
• Systematic and able to work under pressure
• Excellent analytical and good engineering problem-solving skills, workload resource planning, and prioritization skills
• An independent self-starter and a strong team player

Building Technician

Goldwind Services Pte Ltd

SGD 2,400 - SGD 3,900

Job Highlights

• Rewarding career prospects
• Good staff welfare and benefit

Job Description/

Responsibilities

Assist in building / facilities preventive and ad-hoc maintenance works.

Conduct periodic routine inspections and tasks for the proper operations of the facility.

Keep proper records of Mechanical & Electrical (M&E) readings and to monitor the performance of M&E systems and equipment.

Manage service contractors and sub-contractors on site work and to report irregularities to site manager.

Assist in the supervision of maintenance and servicing works carried out by contractors.

Attend to breakdown of building services as and when required.

Hands-on and able to carry out handyman and breakdown maintenance works.

Perform simple troubleshoot issues on breakdowns.

• Evaluate ingredients, work in process, and finished beverage bases with physical-chemical, microbiological and sensory evaluation test procedures to ensure conformance to specification and in accordance to Company ‘s Quality system.
• Complete the approval and release procedures for ingredients, packaging materials and finished product and ensure quality data are transacted in SAP.
• Ensure ingredients have all pertinent documentation (Certificates of Analysis, pre-shipment approvals, etc. before their final release.
• Sample ingredients, packaging materials, intermediate and final products both within the premises and at external storage if required.
• Calibrate analytical equipment accordingly.
• Conduct laboratory testing of equipment /processes/methods to ensure accuracy and repeatability of quality data through process capability studies, control charting, methods validation, out of specification/out of trend analysis demonstrating that GLP is practiced consistently. Document and maintain records of laboratory procedures, process and test data.
• Keep record of chemicals, glass wares, reagents inventories and MSDS for all chemicals. Support the purchase of laboratory item.

Job Requirement :

• Diploma in Chemistry or Food related discipline.
• Minimum of 1 years’ experience in food/beverage or pharmaceutical multinational organization’s quality control department/laboratory operations.
• Good Manufacturing Practices (GMP) experience would be considered as an advantage.
• Good Laboratory Practices (LGP) experience would be considered as an advantage.
• Demonstrated ability of executing food industry analytical testing.
• SAP knowledge would be considered as an advantage.

Job Summary:

Assembling various metal products. You would typically work in manufacturing. Where you'll be responsible for putting together different components to create finished products

Responsibilities:

• Reading blueprints and technical drawings: You'll need to interpret detailed drawings and specifications to understand the assembly process and the required components.
• Inspecting finished products to ensure they meet the required quality standards and making adjustments as needed.
• Ensuring that each component is correctly assembled and meets the required standards.
• Identifying and addressing issues during the assembly process

Education

• ITE in mechnical engineering or above

You will be involved in the processing of prescriptions, dispensing and inventory management. We are looking for individuals who has the aspiration to learn and grow with the organisation.

• Diploma in Pharmaceutical Science or a Certificate in Pharmacy Technician Course
• 2 weekends off per month and able to commit to shifts
• Training opportunities available for upgrading

Yishun Health is a network of medical institutions and health facilities of the National Healthcare Group in the north of Singapore. It comprises Admiralty Medical Centre, Khoo Teck Puat Hospital and Yishun Community Hospital.

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for building related issues eg tiles crack, leaking, paint peel, collapsed false ceiling, wall cracks, door lock faulty, hinges faulty, door faulty, floor finishes, tap leaking, pipe burst, sensor faulty, floor trap choke and etc

· Support and assist in all projects (install, resolve, repair, trouble-shoot) etc.

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write service reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 5 years relevant experience or National Certificate NTC 2 from Institute of Education or Construction Industry Training Institute CITI high certificate with minimum 3 years relating to building and building services maintenance , relevant experience or equivalent;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time as stated in this Contract.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for AV and sound system related issues

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write reservice reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 3 years relevant experience in the management of audio visual (AV) system, sound system etc;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time as stated in this Contract.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for AV and sound system related issues

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write reservice reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 3 years relevant experience in the management of audio visual (AV) system, sound system etc;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time as stated in this Contract.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for AV and sound system related issues

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write reservice reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 3 years relevant experience in the management of audio visual (AV) system, sound system etc;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Job descriptions:

• Carrying out maintenance, repairing and servicing tasks on ACMV system including BMS, chilled water system, FCU, AHU and mechanical ventilation system
• To carry out preventive / breakdown and corrective maintenance
• Attend to defects, complains and requests promptly
• Perform day to day inspection and logging of all facility systems
• Provide technical advice and assistance on all maintenance and breakdown function
• Capable of installing new systems, duct work and testing of ACMV systems will be an added advantage

Requirements:

• 2 years and above in ACMV Facilities Management
• Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, any field

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for building related issues eg tiles crack, leaking, paint peel, collapsed false ceiling, wall cracks, door lock faulty, hinges faulty, door faulty, floor finishes, tap leaking, pipe burst, sensor faulty, floor trap choke and etc

· Support and assist in all projects (install, resolve, repair, trouble-shoot) etc.

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write service reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 5 years relevant experience or National Certificate NTC 2 from Institute of Education or Construction Industry Training Institute CITI high certificate with minimum 3 years relating to building and building services maintenance , relevant experience or equivalent;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Job descriptions:

• Carrying out maintenance, repairing and servicing tasks on ACMV system including BMS, chilled water system, FCU, AHU and mechanical ventilation system
• To carry out preventive / breakdown and corrective maintenance
• Attend to defects, complains and requests promptly
• Perform day to day inspection and logging of all facility systems
• Provide technical advice and assistance on all maintenance and breakdown function
• Capable of installing new systems, duct work and testing of ACMV systems will be an added advantage

Requirements:

• 2 years and above in ACMV Facilities Management
• Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, any field

Job Responsibilities:

• Prepare gas production figures and charts for analysis and archive.
• Keep track of utilities consumption in Senoko Gasworks.
• Responsible for the proper and efficient operation of gas making plants and its ancillaries.
• Attend to faults and breakdowns on gas making plants and their ancillaries.
• Attend to matters relating to production, quality control, storage and distribution of town gas from the gasworks.
• Initiate and liaise with maintenance supervisor or contractors to conduct repair or servicing work for the plants and ancillaries.
• Ensure there is proper observance of all safety regulations and that all works done by personnel under his charge comply with the Workplace Safety and Health Act, the Company’s safety and operation manuals and other relevant local regulations.

Pre-requisites:

• Diploma in Mechanical / Chemical/ Electrical Engineering .
• At least 2 years of relevant working experience, preferably in an oil & gas industry or in a petrochemical plant environment.
• Ability to work independently as well as in a team.
• Possess good interpersonal and communications skills.

Work schedule: 3-shift cycle

Job descriptions:

• Carrying out maintenance, repairing and servicing tasks on ACMV system including BMS, chilled water system, FCU, AHU and mechanical ventilation system
• To carry out preventive / breakdown and corrective maintenance
• Attend to defects, complains and requests promptly
• Perform day to day inspection and logging of all facility systems
• Provide technical advice and assistance on all maintenance and breakdown function
• Capable of installing new systems, duct work and testing of ACMV systems will be an added advantage

Requirements:

• 2 years and above in ACMV Facilities Management
• Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, any field

Job Responsibilities

• Attend to reported gas incidents and gas supply abnormalities such as gas fires, poor gas supply pressure, suspected gas leaks, etc.
• Perform site investigations and rectification work inclusive of co-ordination work with the relevant authorities (e.g. SPPG, SCDF, HDB, EMA) and other external agencies and submission of reports.
• Attend to customer service requests, e.g. install/ replace/ trouble-shoot gas appliances, perform servicing of gas stoves, carry out soundness tests on gas installations, etc.
• Handle customers’ enquiries/ feedback and perform service recoveries.
• Investigate and report on matters related to meter readings abnormality.
• Attend to meter cut-off and account due related matters.
• Any other duties as assigned by supervisor, which may include driving company vehicle to attend to work arrangements.

Requirements:

• Diploma/Nitec in Mechanical or any Engineering discipline.
• Relevant work experience and technical knowledge in gas, plumbing, sanitary, or electrical systems will be an advantage.
• Able to work independently and as a team player.
• Possess good interpersonal and communication skills, with experience in contract management and customer service.
• Possess a driving license (class 2 & 3), preferably with access to personal transport.

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for building related issues eg tiles crack, leaking, paint peel, collapsed false ceiling, wall cracks, door lock faulty, hinges faulty, door faulty, floor finishes, tap leaking, pipe burst, sensor faulty, floor trap choke and etc

· Support and assist in all projects (install, resolve, repair, trouble-shoot) etc.

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write service reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 5 years relevant experience or National Certificate NTC 2 from Institute of Education or Construction Industry Training Institute CITI high certificate with minimum 3 years relating to building and building services maintenance , relevant experience or equivalent;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Responsibilities

• Able to conduct testing of low-voltage switchboards and power distribution boards.
• Able to complete test reports while testing the low-voltage switchboards and power distribution boards.
• To participates and conducts factory acceptance tests / factory witness tests with the presence of clients in accordance to the method of statement.
• To perform in-house test procedures in accordance with the method of statement.
• To perform in-house quality control procedures and checklists e.g., visual inspection, torque tests etc.
• To report the status of calibration, defect reports, replacement procedures, all relevant tools and equipment used by the Testing Department to the Electrical Test Engineer / Quality Engineer.

Requirements

• NITEC and above in Electrical Engineering, Electrical & Electronic Engineering or Mechatronic Engineering.
• Proficient in Microsoft Office tools e.g., Outlook, Teams, Word, Excel
• Able to interpret electrical schematic, single line diagram.
• Experienced in handling tools and equipment used in electrical testing, e.g., Primary Current Injection, Test Set, Secondary Current Injection Test Set, Digital Micro-Ohm Meter, Insulation Resistance Test Set, Dielectric Withstand Test Set.
• Minimum 3 years of relevant working experience.

Roles & Responsibilities

• Assist in liquid transfer and equipment maintenance
• Carry out nitrogen purging and other jobs at customer sites and offshore
• ISO tanks on hire/off hire inspection at yard
• To assist Manager in Company related activities
• Assist in the preparation of Risk Assessments
• Maintain workshop housekeeping
• Any other operations duties assigned to you from time to time

Requirements

• Availability for 5.5 workdays per week
• Willing to work shift during project execution
• Ability to prioritize responsibilities and multi-task
• Preferred hands-on experience

Benefits

• Annual Wage Supplement ( AWS )
• Variable Bonus
• Outpatient medical
• PTO
• Overtime

Responsibilities:

• Design, development, testing and support of firmware/embedded software applications for microcontroller based wireless systems.
• Develop software communication protocols for wireless communication systems
• Drive technology/development projects in all phrases from specification to release.
• Read or understand electronics schematic and system design.
• Work closely with cross functional teams to ensure project delivery on time.
• Define and create product software specification including software architecture, feature descriptions and applications notes of the system
• Research technical issues and/or opportunities and provide recommendations.
• Participate in ad hoc software projects and assignments as required

Requirements:

• Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related fields.
• Minimum 3-5 years of experience in real time embedded system
• Must process strong knowledge of C/C++ language
• Experience with Arm, Cortex based microcontroller is required
• Strong Knowledge of the communication transport protocol like I2C, SPI, UART and USB
• Understanding of the Bluetooth protocol and stack is a plus.
• Familiarity with DSP programming is an added advantage
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.
• Able to manage one's own time efficiently

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

Job Description:
Department: SP1040 Business Engineering

Report to: Section Manager SP1041M, SP1041A

Supervise: N.A

Functional Relationship with: ASEAN Sales, Production, Logistics

Position Profile:
Based in: Singapore

Successful candidate: Candidate will be responsible for the smooth operation, maintenance, and support of AS400 system. The candidate will monitor the system, troubleshoot issues, perform routine maintenance tasks, and ensure optimal performance of the AS400 environment.

Key Duties & Responsibilities :

• Install, configure, and maintain AS400 systems including hardware, software, and related infrastructure components
• Monitor system performance to identify any issues or bottlenecks and take appropriate actions for optimization
• Troubleshoot and resolve hardware and software problems in a timely manner to minimize downtime
• Perform regular maintenance, system upgrades, patches, installations, and migrations as necessary
• Collaborate with IT teams to develop backup strategies and disaster recovery plans for AS400 systems
• Ensure AS400 system and Murata ERP system security by implementing access controls, user authentication mechanisms, users’ roles and access rights etc
• Ensuring that the AS400 system batch operation calendars are synchronized with the Murata ERP system
• Managing job schedules and conducting regular maintenance of data backup activities using LTO backup tapes and Virtual Tape Library (VTL)
• Develop and enhance software applications using RPG (Report Program Generator), CL (Control Language), SQL (Structured Query Language), and other relevant programming languages
• Assist in data restorations request that are required for purposes such as Project Testing activities, data investigations, etc
• Participate in AS400 migration project activity as one of the key members by supporting on the project activities working together with the other project members
• Assist in regular audits activities to identify potential vulnerabilities or risks in the AS400 environment
• Develop documentation including system configurations, procedures, troubleshooting guides etc

Ability / Competency Required:

• Bachelor's Degree in Computer Science or a related field (or equivalent work experience)
• Proven experience working as an AS400 System Engineer or similar role
• Strong knowledge of IBM iSeries/AS400 operating systems (OS/400) including administration tasks such as system administration and configuration management, performance monitoring/tuning etc
• Proficient in CL and RPG programming language on the AS400 platform
• Familiarity with managing IBM Power Systems hardware including servers, disk storage subsystems, tape libraries etc., is preferred
• Experience with high availability solutions such as iCluster is a plus
• Excellent problem-solving skills with the ability to diagnose issues quickly and provide effective solutions within established SLAs
• Strong communication skills both verbal and written

Murata Electronics Singapore is committed to providing a safe and secure environment for all job applicants.
Please note that Murata Electronics Singapore does not charge any fee for job applications or interviews. If you receive any suspicious emails or messages claiming to be from Murata Electronics Singapore, please do not respond and report it to us immediately.

Job Description & Requirements

1. Assembly of factory automation equipments and conveyors.
2. Installation, testing and commissioning of the machines or equipments.
3. Other ad-hoc duties

4. Machines or equipment assembly.

5. Simple troubleshooting

6. Support Mechanical Engineer / Electrical Engineer

Requirements:

1. Secondary level

2. min 2 years related working experiences

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment