DUTIES & RESPONSIBILITIES

Facilities Management

• M&E Equipment: UPS, ACMV – Chiller, Cooling Tower, Air Handling Unit, Air Compressor, Generator, Plumbing and Drainage System, Alarm system in Tech Room, Access Card System, CCTV, Power Distribution System, Plumbing and Drainage System
• General Office: Lighting, Temperature control and power supply and ensure rectification if needed and Pantry Appliances.
• Daily Facilities Inspection nage System, Fitment and decoration indoor: Furniture, Carpet, Wall, Ceiling, Glass Door and Curtain
• Safety: Fire Protection System, Alarm, Escape Route, Accident Incident Reporting, Risk Management procedures and program

Building Operations & Routine Inspection

• To conduct daily checks on essential equipment to ensure that they are operating in a satisfactory condition at all times.
• To carry out inspections of all operating equipments.
• Ensure all ad-hoc works and preventive maintenance works are carried out expeditiously and on time
• Taking readings from main or sub watt-meter and other utilities meter (i.e. electricity, water, gas, etc – as applicable) – monthly or as per maintenance program
• Check and ensure all doors and/or components are in good condition and aligned. Replace mechanisms’ gadget when faulty.
• Check for wear and tear of entrance signs and/or department listings.
• Inspect and replace general light fittings and/or tubes/bulbs for any abnormalities – weekly or as per maintenance program.
• Provide inspection support in ensuring no mosquito breeding internally and externally of the building.

Maintenance

• Check on all M&E equipment for any sign of deterioration, abnormalities.
• Check M&E equipment operating in sequence accordance to 52 Weeks Planned Preventive Maintenance (PPM) schedule
• Provide tool, spares and consumable inventory management.
• Provide upkeep of Equipment and Asset registry.
• Attend to M&E related helpdesk request related to Scope of Work– maintain records of all facilities work requests and utilities readings Support and implement energy management initiatives.
• Provide setup support on special events.
• Check office fit-out furniture and equipment are in good condition.
• Carry out minor repairs as and when needed.
• Troubleshoot equipment breakdowns.
• Perform necessary housekeeping on all facilities and their surrounding areas to ensure neat work areas.
• General maintenance of the facility.

Security, Safety and Work Activities

• Drive a safe workplace and environment at the site,
• Good knowledge of statutory safety requirements,
• To attend to critical works and complete closure within the specified time
• Assist in Fire Evacuation Drills and other fire safety procedures.
• Participate and assist FSM on site Fire Safety Activities and Communication.
• Escort and supervise other third party vendor for routine maintenance servicing – as required. Ensure that no obstacle blocking critical equipment rooms, fire escape route and doors.
• Ensure that all life safety systems are in good working condition (portable fire extinguishers, first aid box, etc.)
• Inspect flooring (tiles, carpets, vinyl, timber) for signs of unevenness preventing any accident due from tripping hazards
• Provide support in ensuring no foul smell in the premises.
• Support and help implement EHS program – Fire Safety/Fire Drill, etc - Check and report fallen object hazard, tripping hazard, etc.

Others

• To participate and ensure that our services and activities are in compliance with the contract.
• Able to utilise computer maintenance management system to manage work orders
• Has basic computer knowledge and able to use Microsoft Office applications such as MS Word, Excel, Outlook.
• Assist and participate on Client and JLL Site FM Audits
• To assist in preparation of weekly, monthly and quarterly maintenance reports
• Daily facilities Inspection
• Ensure that all building and government licenses are updated.

Emergency Call Out

• Stand by 24*7 for all emergency call outs
• Maintain register of all call outs and prepare incident reports
• Coordinate appropriate action for rectification including preliminary analysis of fault

DUTIES & RESPONSIBILITIES

Facilities Management

• M&E Equipment: UPS, ACMV – Chiller, Cooling Tower, Air Handling Unit, Air Compressor, Generator, Plumbing and Drainage System, Alarm system in Tech Room, Access Card System, CCTV, Power Distribution System, Plumbing and Drainage System
• General Office: Lighting, Temperature control and power supply and ensure rectification if needed and Pantry Appliances.
• 
  
• aily Facilities Inspection nage System, Fitment and decoration indoor: Furniture, Carpet, Wall, Ceiling, Glass Door and Curtain
• BAS: Monitoring of Building Automation System.
• Safety: Fire Protection System, Alarm, Escape Route, Accident Incident Reporting, Risk Management procedures and program

Building Operations & Routine Inspection

• To conduct daily checks on essential equipment to ensure that they are operating in a satisfactory condition at all times.
• To carry out inspections of all operating equipments.
• Ensure all ad-hoc works and preventive maintenance works are carried out expeditiously and on time
• Taking readings from main or sub watt-meter and other utilities meter (i.e. electricity, water, gas, etc – as applicable) – monthly or as per maintenance program
• Check and ensure all doors and/or components are in good condition and aligned. Replace mechanisms’ gadget when faulty.
• Check for wear and tear of entrance signs and/or department listings.
• Inspect and replace general light fittings and/or tubes/bulbs for any abnormalities – weekly or as per maintenance program.
• Provide inspection support in ensuring no mosquito breeding internally and externally of the building.

Maintenance

• Check on all M&E equipment for any sign of deterioration, abnormalities.
• Check M&E equipment operating in sequence accordance to 52 Weeks Planned Preventive Maintenance (PPM) schedule
• Provide tool, spares and consumable inventory management.
• Provide upkeep of Equipment and Asset registry.
• Attend to M&E related helpdesk request related to Scope of Work– maintain records of all facilities work requests and utilities readings
• Support and implement energy management initiatives.
• Provide setup support on special events.
• Check office fit-out furniture and equipment are in good condition.
• Carry out minor repairs as and when needed.
• Troubleshoot equipment breakdowns.
• Perform necessary housekeeping on all facilities and their surrounding areas to ensure neat work areas.
• General maintenance of the facility.

Security, Safety and Work Activities

• Maintain security access card record and assist in card issues if required.
• To attend to critical works and complete closure within the specified time
• Assist in Fire Evacuation Drills and other fire safety procedures.
• Participate and assist FSM on site Fire Safety Activities and Communication.
• Escort and supervise other third party vendor for routine maintenance servicing – as required.
• Ensure that no obstacle blocking critical equipment rooms, fire escape route and doors.
• Ensure that all life safety systems are in good working condition (portable fire extinguishers, first aid box, etc.)
• Inspect flooring (tiles, carpets, vinyl, timber) for signs of unevenness preventing any accident due from tripping hazards
• Provide support in ensuring no foul smell in the premises.
• Support and help implement EHS program – Fire Safety/Fire Drill, etc - Check and report fallen object hazard, tripping hazard, etc.

Others

• To participate and ensure that our services and activities are in compliance with the contract.
• Assist and participate on Client and JLL Site FM Audits
• To assist in preparation of weekly, monthly and quarterly maintenance reports
• aily Incilities Inspectioned,
• Ensure that all building and government licenses are updated.

Emergency Call Out

• Stand by 24*7 for all emergency call outs
• Maintain register of all call outs and prepare incident reports
• Coordinate appropriate action for rectification including preliminary analysis of fault

If you are a cheerful, initiative and strong integrity person who likes to meet new people and are able to contribute by fulfilling clients’ needs, join us.

Job Description:

· To manage and ensure that the systems, servers and infrastructure is installed in accordance to the prescribed design document and/or requirements

. Understanding the scope of works and the needs of the clients and implement the appropriate output to the best of your ability or to the requirements

. To design the network architecture and configure in accordance to the requirements

· Configure, Test and Hand over the required systems and provide Training to client

· Ensure the highest standard of system and infrastructure availability

· To liaise with various parties such as system manufacturers or cybersecurity vendors to resolve issues and problems

· Attend new product trainings

Requirements:

. Applicants need to be able to work overtime/Night Shift.

. Bilingual (English and Chinese Mandarin) in writing and speaking

· Required Skill(s): Communication skills, Analytical skills, Decision making, Organizational skills, Attention to details, Patience and Knowledge of Systems engineering software tools

.Min 3 years of relevant hands-on experiences

. Familiar with Security Systems such as ISMS, CCTV, ACS and VA systems will be advantageous

. Familiar with Networking systems (eg. Routing, VLAN, VPN, Wireless AP) will be advantageous

. Familiar with IT Security (eg. firewall, IPSEC, SSL, hardening) will be advantageous

. Able to work independently with minimum guidance, monitoring and a good team player

. Valid Class 3 driving license has an added advantage

Other Information:

· Location: Kaki Bukit or as needed

· Working hours: 44 hours per week (Follow Company’s Arrangement)

· Salary (commensurate with experience): Basic salary + OT allowances + Variable Bonus

Resumes please INCLUDE:

· Personal particulars

· Education background

· Work experiences in point forms

· All reasons for leaving

· Current and expected salary

· Date of availability / Notice Period

Interested applicants are invited to send your updated resume in MS Word format via Apply Now.

We regret that only shortlisted applicants will be notified.

Responsibilities:

• Perform day to day finance activities including AP, AR, cashflow, & other finance related matters
• Monitor customer account details for non-payments, delayed payments and other irregularities
• Update and maintain daily bank record on payment transactions.
• Perform monthly bank reconciliation.
• Handle HR related matters
• Recruitment of both exempt and non-exempt staff
• Other duties as assigned

Please indicate the below information in your resume:

• Current and Expected Salary
• Reason(s) for leaving
• Availability to commence work

Working Hour

Monday to Friday : 9am to 6pm

Saturday : 9am to 1pm

Location

Kaki Bukit Industrial Terrace

• 5 days, MNC, West
• Transport provided (2 ways)
• $4500 - $5000, AWS, bonus
• Medical/dental benefits
• Yearly increment (subject to performance)
• Travelling may be required

Responsibilities:

• Manage and support business Supply Chain systems and databases including WMS and Business Intelligence.
• Develop the script, dashboard, reports and documentation and implement the related projects assigned.
• Work closely with internal and external customers to gather requirements, design, configure, implement.
• Support, enhance system solutions and databases that support business process models and data flow for new and existing customers projects in the area of Supply Chain systems.
• Manage the related IT projects assigned.
• Develop script, dashboard and reports.
• Evaluate the new technologies, propose, and apply them for continuous greater productivity and efficiency improvement.
• Develop user manual, administration guide and policy.
• Document business process mapping to business systems.

Requirements:

• Minimum education level: Diploma
• Years of experience: 3 – 5 years
• Extensive working experience in DBA, database troubleshooting and tuning.
• Experience and good knowledge in Supply Chain Industry
• Working experience in Business Intelligent dashboard and report development and deployment.
• Power BI development and deployment into Azure Power BI service Experience is preferred.
• May need to travel overseas to regional sites

Interested applicants, please send your resume to [email protected]

We are looking for a candidate with the below given skills:

Main Tasks & Responsibilities:
• Assist project or team leads in evaluating and recommending the appropriate IT infrastructure products (commercial or open source) that will meet project or customer requirements
• Take charge or support the deployment of said products, including integration and testing activities at the System-as-a-whole level
• Work with engineers from other disciplines (e.g. software, cybersecurity, integration) in the delivery of turn-key systems or proof-of-concept (POC) initiatives
• Monitor the health of infrastructure services and perform availability management for servers and its services, and assist in the resolution of operational issues
• Create & maintain technical documentation on Operations / Audit Best Practices, troubleshooting & related solutions knowledge base
• Manage the system recovery process (backup/restore of Infrastructure services and critical production server data and image) and assist in preparing incident reports in the event of outages
• Participate in failover or disaster recovery exercises of the IT infrastructure when required
• Deploy security fixes on Infrastructure services in accordance to enterprise vulnerability and patching strategy
• Support the administration of servers, VMware/Hyper-V platforms and domain controllers/LDAP servers
• Participate in the optimization of system performance and system capacity planning

Requirements:
• Degree in Computer Science, Information Technology or related disciplines
• At least three years of relevant IT experience in designing (not mandatory), deploying and managing IT infrastructure systems.
• Required knowledge and experience with Windows Server 2k16/2k19, Linux, VMware/Hyper-V virtualization, and Azure Cloud
• Knowledge of infrastructure best practices, system technologies, operation processes and system engineering methodologies
• Working knowledge of cybersecurity technologies will be desirable
• Technical certification in cloud and system technologies, such as CCNA, Microsoft Certified: Azure Administrator Associate, VCP (VMware), VMCE (Veeam), CEH etc. will be advantageous
• Good written and oral communication skills
• Motivated team player with a keen eye for details, but able to work independently as well when required
• Candidate should also be willing to explore new technical domains in order to have a holistic technical view of the digital transformation landscape

Our client is in the Real Estate industry. Due to their current expansion plan, they are looking for an AV Technician to join their Team, in hopes of developing their current high performing team. They are located at West – Easily accessible.

Responsibilities

1. Set up and maintain AV equipment for meetings, presentations, and events.
2. Ensure functionality and suitability of AV setups for client needs.
3. Conduct regular checks and preventive maintenance on projectors, microphones, video conferencing systems, and multimedia devices.
4. Submit weekly/monthly event schedules and facilities booking collection reports to the Client.
5. Assist users in viewing event venues.

Requirements

• Minimum Tertiary educational level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

Email: [email protected]

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Working hours: 5 days work week (8am - 530pm)

Salary: Up to $2500 + Allowances

Responsibilities:

• Testing, tuning and troubleshooting PCBA or products
• Produce output as per production target

Requirements

• NTC / Nitec / Diploma in Electronics Engineering
• Able to perform soldering and tuning of PCBA and products
• Able to troubleshoot PCBA and products, read schematic diagram
• Able to use simple equipment to troubleshoot such as multimeter and oscilloscope
• Understanding of basic electronics
• Entry level candidates are welcome to apply and training will be provided

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394 • Reg No: R23117066 (CHEW KIA ZHENG)

ID: 594444

The Opportunity

• Adecco is partnering with a well-established MNC innovative electrical system manufacturer.
• The role will be involved with planning, participating and supervising the integration, verification and validation process and supporting system.
• Working hours: Monday – Friday

The Talent

• Minimally a bachelor's degree in engineering or related field and 5 years of experience
• Experience in verification and validation of large integrated systems, Unix/Linux/Android systems, defect management, and common test practices
• Ability to read and interpret requirements, communicate effectively, and perform basic troubleshooting on IT software and hardware
• Experience in writing test cases and providing onsite instruction
• Good to have experience in software engineering integration, collaboration with clients and developers, and open-source configuration management and deployment tools
• Good to have some understanding of software development methods and electrical/mechanical design
• Good to have some experience in user interfaces, networking, wireless, and communication systems test
• Versatility to handle different job scopes such as supporting bids and work package management

The Job

• Plan and execute integration, verification and validation (IVV) activities for various systems and projects
• Decide on the appropriate test strategy, modules and practices to ensure quality and compliance
• Create the system test plan and report, documenting the test objectives, scope, methods, results, and issues
• Work closely with project engineers (SEM) to agree on testing durations and project risks, and provide timely feedback and recommendations
• Efficiently manage test resources (staff, software and hardware), ensuring optimal utilization and availability
• Manage defects and engineering changes for the customer, using appropriate tools and processes
• Contribute to the estimation, planning and execution of IVV activities, following the best practices and standards
• Be able to coordinate activities with a global team, working across different time zones and cultures
• Participate in bid activities, providing scope and costing for IVV tasks

Next Steps

Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, expected package and reason for leaving.)

To apply online, please click on the link and contact us to follow-up. Alternatively, please send your resume to p[email protected].

All shortlisted candidates will be contacted. All the best!

Job Description & Requirements:

Full job description:

Obtaining quotations, liaising and negotiate with sub-contractors and suppliers.

Responsible for measuring quantities and taking off.

Prepare and analyse cost comparison.

Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments.

All other QS related job.

Job Requirements:

Diploma with 3-5 year experience as QS in main-con companies.

Ability in contract negotiation, contract administration & variation orders.

Involve in security projects implementation.

Site coordination for Performing Daily Corrective and Preventive Maintenance. Other ad-hoc duties as assigned

Assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus.

Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.

Constructing and fabricating parts, using hand tools and specifications.

Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics.

Advising management on continued use of unsuitable equipment, appliances, and apparatus. Supervising electricians.

Ordering of electrical supplies and equipment.

Job Description & Requirements

Assist in installation, testing, commissioning and troubleshooting of CCTV / Electrical Wiring / Cabling installation/ Electronic Circuit. Involve in security projects implementation.

Site coordination for Performing Daily Corrective and Preventive Maintenance. Other ad-hoc duties as assigned

Assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus.

Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.

Constructing and fabricating parts, using hand tools and specifications.

Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics.

Advising management on continued use of unsuitable equipment, appliances, and apparatus. Supervising electricians.

Ordering of electrical supplies and equipment.

Job Description

• Industry/ Organization Type: Manufacturer (Cleaning Products)
• Position Title: Equipment Technician/Senior Equipment Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $2700 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Robot mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical & Electronic Engineering or Mechatronics)
• Process Class 3 driving license will be advantageous
• 2-4 years of hands-on repair and maintenance experience

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65052 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing/Interior Design
• Position Title: CNC Technician/Operator
• Working Location: Changi South
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for setting up, tool selection, operating multi-axis CNC machining, Fiber Laser Machining and inputting the programs as designed.
• Ensure that the CNC machine & Fiber Laser Machine operates in a safe, controlled environment.
• Responsible for loading and setting up.
• Perform basic preventive & corrective maintenance of the machine.
• Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
• Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
• Machine-related general tasks.

APPLY NOW!!!

• Minimum Nitec in Precision Engineering or related field.
• At least 4 years of related working experience.
• Computer literate, and familiar with WoodWOP, Pytha, Art- CAM, Jdpaint, Solidworks, AutoCAD.
• Knowledgeable in the operation of CNC Machines & Fiber Laser Machines.
• Familiarity with Homag CNC Machines is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65253 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Roles & Responsibilites

• Basic DC Operations Support, eg. Hot swop, inter-rack cabling, Power Cycle, escort, tape management, etc.
• To provision customer network services on core equipment
• To troubleshoot escalation from Helpdesk team.
• To ensure maximum possible service availability and performance
• Temperature monitoring
• Provide shift work NOC operations, such as remote hand service, customer support, hotline, etc;
• Escort customer/vendor for Data Halls visit;
• To ensure all the system is well taken care and monitor
• Support and execute task assign by the Leader.
• Escalation and alert notification.
• To ensure all the system is well taken care and monitor

Requirements:

• At least an ITE or Polytechnic graduate from an IT related programme
• Preferably with a networking certification
• 1 – 2 years’ working experience in IT Helpdesk / NOC environment (Telco Environment)
• Familiar with Network, System and Building Monitoring Systems alerts
• Good oral and written communication skills

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Responsibilities

• Perform routine maintenance, troubleshooting, and repairs on manufacturing facilities and equipment.
• In charge for facilities equipment and maintenance of compressor & exhaust system, HVAC, ACMV
• Conduct regular inspections to ensure compliance with safety regulations and preventive maintenance schedules.
• Maintain accurate records of maintenance activities, equipment performance, and inventory.
• Performed process control checks where applicable.
• Participated in preventive maintenance & calibration checks for production and measuring equipment as scheduled
• Utility setup and equipment move-in, move out document submission.
• Participate in the planning and execution of facility expansion or improvement projects.

Requirements

• Nitec in Mechanical Engineering or related field.
• Prior experience in facilities maintenance, preferably in the semiconductor industry.
• Strong knowledge of eACMV and HVAC.
• Good troubleshooting and problem-solving skills.

Interested candidates who wish to apply for the advertised position, please APPLY with an updated

copy of your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Address: One north

Working hours: Monday – Friday 9am-6pm

Salary: up to $2400

Job Description

• Handle Service and repair cases of ear pieces, In-The- Ear (ITE) Hearing Aids, Behind-The-Ear (BTE) Hearing Aids
• Handle Urgent custom made ear piece order
• Provide Support in logistics (i.e Packing)
• Trimming/ Filling Ear mold
• Need to perform soldering work
• Quality Check and testing of all out-going instruments
• Scanning Ear impression for custom made ear mold and ordering from Vietnam
• Maintain housekeeping for safe working environment
• Any other ad-hoc duties assigned by the supervisor

Job Requirement

• Minimum 2 years of experience as technician in repair and servicing of small electrical parts
• Min NTC/ ITE or Diploma in Engineering , preferably in Electronics, Electrical, Mechatronics and etc

If interested, please email me at [email protected]
➖
Alex Goh Hock Leong
(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Responsibilities: -

• Process and dispense medicines (under supervision) to patients in inpatient and outpatient settings.
• Manage daily ward request orders for inpatient supplies.
• Assists Pharmacist in the areas of procurement, receipt and processing of drugs in the pharmacy to meet the internal and external customer requirements.
• Track and maintain records of inventory including drug usage, expiring drugs and stock counts.
• Complies with Corporate Quality and Regulatory standards and hospital’s SOPs.
• Assists the Pharmacist in day-to-day operation as directed.
• Performs any other duties as and when requested by Pharmacist and / or Pharmacy Manager.

Qualifications and Experiences: -

• Diploma in Pharmaceutical Science or equivalent OR possessed a valid certificate for Pharmacy Technician course.
• Relevant experience in inpatient setting or have experience in inventory management would be an added advantage.
• Good interpersonal and communication skills.

Interested candidates, please apply with your updated resume, expected salary and notice period.

We regret that only shortlisted applicants will be notified.

NOTE: CRAWFURD HOSPITAL IS NOT IN COLLABORATION WITH ANY EMPLOYMENT AGENCY NOR CONSULTANT FOR OUR POSITIONS OPENING.

Responsible to perform mold set-up, mold down, input process parameters and production start-up. Able to analyse, trouble shoot and resolve when an process / quality issue arises.

Requirements:

• Min NTC Certificate in Engineering discipline .
• Strong interest in pursuing technical solutions and breakthroughs
• 6-day work week (7am to 3pm or 3pm to 11pm or 11pm to 7am)
• 2 years' experience is preferred but not necessary

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned Testers and Handlers / Probers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible for tracking, monitoring and reporting daily equipment downtime.
• Responsible for daily house keeping and any other responsibilities as assigned.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical/ Mechatronics Engineering or equivalent.
• Specialized knowledge of equipment, testers, handlers, probers, etc is preferred.
• Possess Trouble shooting skills on equipment maintenance and repair.
• Possess strong analysis and good teamwork.
• Good communication and presentation skills.
• Able to commit to either 12-hr permanent day / night shift.

Precision Engineering local company located in Tuas looking for Auto lathe machine technician.

• able to program Citizen auto lathe machine and troubleshooting
• able to work 3 shifts
• able to work with components 1mm diameter
• able to lead and train a team of operators
• at least 5 years supervisory experience

• Monthy base salary: Up to S$8000
• Hybrid work arrangement (Can be discussed)
• Must be willing to stand-by 24/7 (stand-by allowance available)

Job Description

• Engage in and improve the whole Java Management Service lifecycle of applications deployment and operation.
• Improve the existing continuous deployment pipeline for a wide range of functionalities across geographically separated zones.
• Improve JMS Observability platform, Security and Incident management to meet the SLAs and SLOs defined for all Oracle cloud services.
• Architect highly available and scalable service.
• Skills to troubleshoot and trace symptoms back to the root cause
• Document and present methodologies to operations, engineering, and executive teams.
• Educate the wider engineering organization on design and operational best practices for distributed computing.
• Helping to meet the SLAs/SLOs for internal and external services and continual improvement of operational processes (weekly ops meetings, metrics, etc).
• Build tools and automation to improve system observability, availability, reliability, performance/latency, monitoring, emergency response.
• On-call duties.

Job Requirements

• Minimum of 5-7 years of hands-on experience in Java Management Service (JMS) lifecycle management, deployment, and operation.
• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Willingness to participate in on-call duties and respond promptly to incidents outside regular working hours.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Brandon Lim | EA Registration No: R21102894

Responsibilities:

• Ensure compliance with industry regulations and perform quality inspections.
• Conduct measurements and tests on products, calibrate equipment and identify production irregularities.
• Prepare, review and revise testing procedures or MSOP for the part’s measurement.
• Perform dimensional assessments of products to ensure dimensions meet drawing specifications.
• Document results, prepare inspection reports and perform simple data analysis.
• Follow up with Production on quality issues to resolution through corrective actions.
• Assist in NPI parts inspection, generate report and perform sample evaluation.
• Maintain equipment calibration according to metrology standards and monitor functionality.
• Prepare and update Work Instructions and conduct measuring equipment training.
• Ensure approval samples are properly identified and recorded in the Master list.
• Identify areas for quality control improvement.

Requirements:

• Possess relevant experience as a quality technician.
• Proficient in Microsoft applications, including Microsoft Excel and Word to prepare the inspection record.
• Capable of operating and programing automated measuring equipment (CMM, Optical Measuring equipment etc)
• Possess the ability to analyze and interpret technical information (understand GD&T, blueprint reading etc)
• Able to communicate effectively with both internal and external personnel.
• Able to work independently with minimal supervision.

Specific Role Responsibilities:

• Perform work at cell level to meet the production schedule.
• Assemble, disassemble, perform minor cleaning, inspect, troubleshoot, and test in accordance with Component Maintenance Manual.
• Promptly resolve issue and ensure all repair cost estimates are updated accurately.
• Work in close cooperation with supervisor and other support personnel to resolve problems as when necessary.
• Adhere to Quality Management System (e.g. AS9110C / Airworthiness Part 145 requirement)
• Understand the use of common measuring equipment like torque wrench, calipers, micrometers, bore and depth gauges.
• Complies with all Environment, Health & Safety policies, and regulations
• Complies with all US and Singapore Export Control Regulations
• Actively participate in process improvement and environmental, health and safety activities.

REQUIREMENTS

• NITEC/Higher NITEC/Diploma in Engineering (Mechanical / Mechatronics / Electronics/ other Aerospace related courses)
• Personnel with passed in Air legislation CAAS/ EASA papers L12/ L11/ M10, or other industry related qualifications would have added advantage.
• Preferably with degree or diploma in engineering.
• Ability to read, write and understand English.
• To read and work from technical and service manuals, technical orders, sales orders, specification, drawings, and other written instructions.
• Computer literacy (Knowledge in SAP will be preferred).
• Good communication skills needed, both oral and written.
• Salary will commensurate with Experience

Interested and suitable candidates kindly forward your recent resume to [email protected]

We regret that only shortlisted candidate will be notified.

JMC Talent Search Pte Ltd / EA Licence No: 93C4957
EA Personnel: Chew Mei Xiu (Jamie)
EA Personnel No: R1111089

Roles & Responsibilities

• Deliver professional nail services including manicure/ pedicure, extension and gel nail services
• Good excellent cleanliness and hygiene practices
• Recommending various nail designs and nail art to clients
• Evaluating the condition of clients’ nails and advising them on proper nail care and suitable nail care treatments
• Sanitizing all nail instruments and equipment before each use
• Ensuring that workstations are kept clean and orderly
• Ensuring that nail supplies are adequately stocked
• Advise clients on nail care and use of products and colors
• Promote and sell nail care products
• Schedule client appointments and accept payments
• Other duties as and when assigned

Requirements

• With or Without experience - Candidates with experience will be an advantage
• Able to work on weekends and PH
• Good communication skills and cheerful personality

Other Information:

• Good and comfortable working environment
• Annual leave and Medical benefits
• Basic Salary + Commission + Service point + Incentive