- Permanent

- Up to $6000 + VB

- Mon to Fri: 8.30am – 5.30pm

- Jurong East

Job Responsibilities:

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Period:

• Permanent

Location:

• Jurong East

​Working hours:

• Mon to Fri: 8.30am – 5.30pm

Salary:

• Up to $6,000 + VB

Job Requirements:

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Strong Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914
T: 6337 3183 | W: www.successhrc.com.sg

Key Responsibilities:

EV System Diagnosis and Repair: Perform diagnostics and troubleshooting of electric vehicle systems, including high-voltage components, battery management systems, power electronics, and charging systems.

Identify and rectify electrical and mechanical issues using specialized diagnostic tools and equipment.
Conduct repairs on electric drive units, battery packs, inverters, and other EV-specific components.

Vehicle Maintenance and Service: Perform routine maintenance and servicing on electric and hybrid vehicles, including brake system inspections, fluid checks, tire rotations, and filter replacements.
Conduct battery health assessments and maintenance procedures as per manufacturer guidelines.
Ensure all maintenance work is carried out in accordance with EV service procedures.

High-Voltage System Handling: Safely handle high-voltage components and systems, following established safety protocols and procedures.
Perform high-voltage system disconnections and reconnections for repairs and maintenance.
Use proper personal protective equipment (PPE) and safety precautions when working with high-voltage systems.

Software Updates and Calibration: Perform software updates, recalibrations, and programming of EV systems using manufacturer-approved tools and software.
Ensure all software updates are applied accurately and in compliance with specifications.

Documentation and Record Keeping: Maintain accurate and detailed records of repairs, diagnostics, parts used, and service performed.
Generate comprehensive reports on vehicle condition, repairs, and recommended maintenance.

Training and Professional Development: Stay updated with the latest advancements in electric vehicle technology and attend relevant training programs to enhance skills.
Participate in ongoing training provided by to stay current with EV system developments.

Performs any other ad-hoc duties as assigned by the Supervisors.

Requirement:

• Minimum 2 years of relevant experience. Demonstrate experiences working with electric and hybrid vehicles, is preferable.
• ITE NTC 3/2, Nitec or equivalent; formal technical trained in automotive technology or EV is preferred.
• Certification as an Electric Vehicle Technician or equivalent, such as Electric/Hybrid Vehicle certification.
• Strong understanding of electrical and electronic systems, high-voltage safety protocols, and vehicle networks.
• Proficient in spoken & written English and Mandarin to better coordinate with Chinese speaking counterparts.
• Be resourceful and multi-tasking attitude.
• Excellent problem-solving skills and attention to detail.
• Effective communication skills, both verbal and written.
• Ability to work independently and as part of a team in a fast-paced environment.
• Strong commitment to safety and adherence to established protocols.
• Flexibility to adapt to changing technologies and industry trends.
• Class 3 driving license in Singapore

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, and various telecommunication system drawings.

Salary: $3800 - $5500

Job Description:

1️⃣ Lead engineering design, ensure thorough understanding of client requirements to propose optimal solutions

2️⃣ Prepare engineering documents (VDRL) and address client feedback promptly with high quality and accuracy

3️⃣ Create preliminary drawings and guide AutoCAD drafters in producing engineering deliverables

4️⃣ Incorporate industry standards and best practices into design, drawing preparation, review, and submission

5️⃣ Supervise equipment assembly, cabinet integration, system configuration, simulation, testing, and verification

6️⃣ Provide in-house training for client and commissioning engineers

Requirements:

1️⃣ Minimum Diploma in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore) or possesses technical knowledge about Maritime communication systems

2️⃣ Experience in a similar role within the industrial markets

3️⃣ Experience as an ex-sailor, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Well-organised documentation and time management skills

5️⃣ Ability to articulate and share concepts with customers and suppliers

6️⃣ Knowledge of AUTOCAD will be an added advantage

7️⃣ Site commissioning/radio surveying experience as per SOLAS / MODU (Not a must-have but good to have)

8️⃣ Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, and iBwave for UHF/GSM coverage (Not a must-have but good to have)

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)

☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated Resume OR email to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Setting up electrical connections in R&D equipment
• Setting up of Jigs
• Other R&D tasks as required (PCB testing, assembly, soldering, paneling, cabling and misc work)
• Performing Goods Receipt
• Labelling and Packaging of components
• Inventory storage and housekeeping
• Training will be provided

Requirements:-

• Possess engineering experience in Mechanical/Electronics, or equivalent
• At least 5 years experience in relevant or related field
• Good communication and interpersonal skill
• Proactive with good initiatives, problem solving skill and analytical ability
• Technical knowledge and hands-on skills on monitoring, troubleshooting, servicing, maintenance and tool recovery
• Able to work under pressure
• Experienced In Assembly, Automation, Testing / Soldering / Machine Alignment (eg. Perpendicularity) preferred
• Able to work any shift
• Able to work OT on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Job Summary

You will be working with a team of professional engineers to challenge status quo, think different, thrive in ambiguity to meet mission objectives of our customers. You will lead a team of software engineers and work closely with other cross functional teams, Service Delivery Managers and Project Managers to deliver quality satellite ground software systems to our customers.

Job Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implementation of cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Plan and provide necessary software maintenance, training, and consultancy to users on the deployed software.
• Continuously develop new skills & techniques in software technologies to improve and reduce software development time and effort.
• Participate in the definition and development of future products.
• Collaborate with various stakeholders including customers, and engineering teams across organizations.
• Able to challenge the status quo, think different, thrive in ambiguity, care for team members and being ever curious.

Job Requirements

• Knowledge in Computer Engineering or related field.
• At least 8 years’ experience in mission critical system software development.
• Proficient in developing full stack applications, preferably with C#, JS.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.
• Familiar with agile software development lifecycles.
• Good understanding of hardware.
• Able to communicate in English and work in a fluid, innovative environment.
• Singaporean only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Job Description

• Maintain all electrical in good condition
• Preventive maintenance all load center
• Checked all support main power annual
• Take care lighting general area
• Repairing work order and carry out
• Daily report to Chief Engineer
• Attend meeting as assigned by Chief Engineer
• All happening in department informed to Chief Engineer

Work Week & Shift: 5.5 days

Location: Gul Circle

Job Responsibilities:

• Perform facilities maintenance of crane and machineries
• Perform routine preventive maintenance and corrective action to ensure equipment run smoothly and efficiently
• Respond promptly to calls and feedback
• Liaise with contractors and in-house team to handle breakdown
• Provide technical support, standby and respond for emergency
• To ensure cleanliness/housekeeping / tidiness of warehouse, warehouse equipment is kept in good order/conditions
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time.
• Travel overseas for work / assignment as and when necessary or requested by your immediate supervisor / the head of department.

Compensation:

• annual wage supplement (AWS)
• allowances*
• overtime

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Responsibilities

• Planning and Implementing of Electrical, lighting control system and Hotel Guestroom System
• Testing and commissioning of lighting control system and motion sensors
• Project Management

Requirements

• 1-2 years working experience in Electrical, Lighting / CCTV / building automation
• Working experience with Lutron, KNX Lighting Control Systems
• Ability to communicate effectively
• Self-motivated and able to work independently
• NITEC/Diploma/Degree in Electrical/Electronic/Information Technology/ Computer Science or equivalent
• Benefits: Excellent career advancement, AWS, Bonus, holiday

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $3.3k
• Working location at Joo Koon

Job Responsibilities:

• Inspect, maintain, and repair material handling equipment (e.g., cranes, hoists) at customer sites.
• Conduct post-service reviews with customers.
• Utilize company digital tools for work and customer interactions.
• Identify sales leads and opportunities for improvement.
• Complete accurate, professional service reports promptly.
• Maintain company equipment, vehicles, and assets in safe, operational condition.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care.

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental
   health care.
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Mon to Thurs 8.30am - 6pm

Fri 8.30am - 5.30pm

The primary purpose of the position of Senior IT Systems Analyst is to analyse, design, and enhance the Company’s Information Systems to ensure they effectively support and contribute to the overall mission and objectives of the organization.

They work with business stakeholders, IT teams, and vendors to identify requirements, develop solutions, and ensure that systems meet the needs of the organization.

Responsibilities

• Management and support of daily End Users IT requests/issues on business application and Workflow systems

• Ensure IT Tickets are properly logged and followed up with timely escalation to the supervisor and vendors

• Support of business application systems consist of but not limited to DMS (Dealer Management System) and CRM (Customer Management System).

• Ensure proper workflow and documentation of business application systems are in place in the areas of application data backups, housekeeping process, project documentation, application disaster recovery procedures, application licenses and inventory

• Ensure applications conform to stakeholder requirements, reviewing & updating of software design architecture, technical documents, maintaining and enhancing existing application systems

• Work closely with business functions on business application projects, assist & participate in the design & development of new/upgraded of these systems, liaising with vendors to support established specifications & requirements.

• Maintaining open communication with stakeholders and reporting progress and issues to project management and relevant teams.

• Perform periodical audit and security review in the domain of business application systems, accounts, design, architecture to ensure setup adhering to IT Governance & Compliance requirements.

• Designing information systems, including software and hardware components, that meet business requirements and align with IT standards and policies.

• Perform impact analysis arising from business change requests.

• Collaborating with software developers, IT engineers, and other stakeholders to implement and integrate systems.

• Testing and debugging systems to ensure that they meet functional and performance requirements.

• Providing training and support to end-users and IT staff on the use and maintenance of systems.

• Ensuring that systems comply with relevant laws, regulations, and standards.

• Providing technical guidance and mentoring to junior system analysts

• Perform any other duties as directed by Section Head and Management

Experience

• Bachelor or higher qualification in Technology /Information Management /Computer Science

• At least 5 years of technical HANDS-ON experience in business applications support, development, testing, systems design or project management (SDLC)

• Good programming skills in ASP.NET, .NET Core, C#, PHP, Javascript, HTML5,

• Previous project experience with Microsoft end-user technology and related applications. (eg: Microsoft Office 365, Microsoft Teams, Power Automate, Power Apps)

• Experience in the implementation & support of business application systems utilising technologies in the areas of Microsoft solutions.

• Have deep knowledge in Relational Database Management System (RDBMS) such as MS SQL and SQL

• Possess strong business process and analytical skills with the ability to assimilate information quickly, and able to communicate requirements and issues clearly and concisely.

• Knowledge and experience on Automotive Industry business process and application systems preferred.

• ITIL, Microsoft MCDBA, Salesforce and PMP certificate holders will be an added advantage

• Excellent analytical & problem-solving skills, strong self-initiative, good communication skills, can-do attitude and great team player

• Analytical Skills: Strong analytical and problem-solving skills are necessary, including the ability to identify issues, conduct root cause analysis, and develop solutions.

• Communication Skills: Excellent communication skills are necessary, including the ability to communicate technical information to both technical and non-technical stakeholders.

• Project Management Skills: Good project management skills are required, including the ability to manage multiple projects simultaneously, prioritize tasks, and deliver them on time, within budget, and to the required quality standards.

• Attention to Detail: Strong attention to detail is required to ensure that systems meet functional and performance requirements and comply with relevant laws, regulations, and standards.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for System Engineers to join their team and contribute to their

ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Providing technical consultancy advice relating to system design and configuration.
• Implement system infra expansion design and configuration Monitor System Performance.
• Assisting the customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged.
• Resolving system incident/ problem onsite.
• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Operation/ Project Manager.
• Applying operating system updates, patches, and configuration changes.
• Maintaining the configuration of the system.
• Liaising with OEM/Vendor/subcontractor for technical support.

Requirements:

• At least 1 – 2 years’ onsite Systems Engineer experience
• Good understanding of Infra system design
• Excellent communication skills with customers
• Keen sense of urgency for service performance issues
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

- The Solar Photovoltaic (PV) and Energy Storage Systems (ESS) Asset Maintenance Engineer leads in the operations and maintenance of solar PV ,Hot water and ESS

- Establishes new methods to optimise system performance and improve maintenance processes.

- He/She prepares cost estimates for maintenance and verifies claims on repair works.

- He/She occasionally works outdoors at solar PV, Hot water and ESS sites.

- He/She is systematic and has good problem-solving skills in leading the operations and maintenance works

- He/She has good leadership and communication skills to engage his/her stakeholders.

- He/She is also service-oriented and ensures customers are satisfied with the services provided.

- He/She to Create Maintenance Schedules

The Institute of High Performance Computing (IHPC) was established in April 1998 to provide leadership in high performance computing as a strategic resource for scientific inquiry and industry development. Our mission is to advance science and technology, and develop leading edge applications through high performance computing and computational science.

We are looking for highly motivated individuals who are able to work independently and yet are good team players, possess excellent analytical, technical and problem-solving skills, good technical writing and presentation skills. If you share our interests in solving challenging scientific problems using computational science, mathematical methods and/or engineering techniques, we welcome you to apply for the following position.

SYSTEMS SCIENCE DEPARTMENT

Research Scientist (Urban Systems & Transportation modelling)

We are looking for researchers who are highly motivated with a passion for developing solutions relating to modelling and simulation of transportation and complex urban systems. The candidate will join a multidisciplinary team of scientists and engineers to develop next generation transport and urban R&D solutions, leveraging on advanced AI and digital twin technologies. The role is expected to work both internally and externally with collaborators/stakeholders from industry and government agencies.

Requirements

· PhD in Computer Science/Engineering/Computing/Information Systems/Civil Engineering or equivalent

· At least 5 years of experience

· Relevant experience/expertise in at least one of the following areas: Transport system modelling, Agent-based simulation, Geo-spatial analysis, Digital twin

· Strong interests in statistical modelling, optimization, AI

· Proficient in programming languages like Java, Python or C++

· Self-driven and motivated team player

· Curiosity and passion to learn new things

· Good written and verbal communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are looking for a motivated and enthusiastic System Engineer to join our client's team. As a System Engineer, you will help design, implement, and maintain the infrastructure and systems that support their technology environment. This role is open to fresh graduates who are passionate about learning and eager to contribute to system operations, security, and optimization.

Responsibilities:

• Assist in the setup, configuration, and maintenance of system hardware and software.
• Monitor and troubleshoot system performance, ensuring high availability and reliability.
• Support the deployment of software, updates, and patches across servers and networks.
• Collaborate with other teams to ensure the systems meet operational requirements.
• Implement security best practices to safeguard data and maintain system integrity.
• Participate in system performance analysis, backups, and disaster recovery procedures.
• Continuously learn and stay updated on the latest trends in system engineering and IT infrastructure.

Qualifications:

• A graduate in Computer Science, Engineering, Information Technology, or related field (or equivalent experience).
• Basic knowledge of operating systems (Linux, Windows, etc.) and network configurations.
• Familiarity with virtualization technologies (e.g., VMware, Hyper-V).
• Understanding of system monitoring tools and performance metrics.
• Strong problem-solving skills and a willingness to learn.
• Ability to work effectively both independently and as part of a team.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.