• Location: Changi South
• Working Days: 5 days, Mon to Friday
• Working schedule : (rotating 8 hours shift) AM 0730 to1630 PM, 1330 PM to 2330 , 2230 PM to 0730 AM, 5 day work but weekend need to work if rotate
• Salary : basic $2300 + allowance

Position Requirements & Education:

• Education: GEC “O” level

Position Description:

• Perform manufacturing operations associated with production parts.
• Ability to communicate what has been experienced and or seen.
• Accurately and efficiently set-up equipment per engineering instructions / Customer’s spec.
• Execute daily autonomous maintenance and set-up activities.
• Assist in developing improvement methods and practices to increase production output safely.
• Accurately complete/create documentation associated with production processes.
• Ensure timely and accurate transactions of workflow in Oracle system.
• Assist in performing required process capability studies, equipment installation qualifications, and process validation.
• Active participation on audit such as safety inspection, STOP card, Job safety Analysis.
• Comply with all company policies and procedures including safety regulations, PPE requirements, SOP, Job Instructions and Good manufacturing procedures.
• Responsible for upkeep of production areas and provide a clean and safe work environment.
• Other duties as assigned

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Engage in hands-on activities to conduct regular inspections and monitoring of various building services and facilities.
• Address breakdowns, respond to complaints/feedback, and attend to tenant service calls regarding building services and facilities.

Requirements:

• Nitec and above.
• At least 3 years of relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Field Technician cum Delivery Driver

Job Description & Requirements

* Repair and fault rectification on equipment

* Support on installation & delivery on site

* Knowledge in Plumbing and Electrical work

* On-site servicing and general cleaning at customer's site

* Support in preparation of equipment before delivery

* Ability to diagnose fault to component level

* Support in-house and field service job

* Support Service Centre activities

* Ad hoc duties as per assigned by Supervisor

Requirements :

* Min NITEC or Diploma in any engineering discipline or equivalent

* Min 1-2 years of working experience

* Good communication, independent, committed, full of initiative, meticulous, confident

* Bilingual in spoken languages

* Must enjoy field and hands-on job as well as meeting people

* Entry level are welcome but must be a keen learner

* Possess driving license (class 2 & 3 /4 manual)

* Prefer to own motorbike

* Able to work overtime on Saturday (at times required)

Interested candidate may send in their resume either via email to: [email protected] or Whatsapp to: 96518935

Responsibilities:

• Set-up, operate, and troubleshoot all AV equipment and systems.
• Ensure all equipment and systems function properly.
• Carry out routine checks on all equipment and systems to ensure they are in working condition
• Resolve any technicial issue with equipment and systems.

Requirements:

• Minimum NITEC in Electrical Technology or related
• At least 1 year of experience handling AV in hotels or events setting

Other Information:

• Working hours: 5 days work week rotating shift
• Location: Central

We regret that only shortlisted candidates will be notified.

By sending us your personal data and/or resume, you are deemed to consent to AM Recruitment Pte Ltd or its agents to collect, use and disclose your personal data and/or resume for the purpose of processing and administrating this job application.

Registration No: R23117478 (Mandy Lim Teng Hong)

EA Licence No: 23C1821 (AM Recruitment Pte Ltd)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are looking for an experienced E&I Technician to support the installation, maintenance, troubleshooting, and repair of electrical and instrumentation systems for Power Plant and Oil & Gas projects. The ideal candidate will have a strong background in both electrical and instrumentation systems, a solid understanding of industry standards, and the ability to work safely in complex environments.

Key Responsibilities:

Electrical Systems:

1. Installation & Maintenance:

- Install, maintain, and repair electrical systems, including power distribution, lighting, motors, and electrical panels.

- Inspect and test electrical systems to ensure compliance with safety and operational standards.

2. Troubleshooting & Repair:

- Diagnose and repair faults in electrical systems, including switches, circuit breakers, and wiring.

- Conduct preventive maintenance on electrical components to avoid downtime.

3. Wiring & Connection:

- Ensure correct wiring and connections for electrical circuits, following blueprints and schematics.

- Assist in the installation and commissioning of new electrical systems and equipment.

Instrumentation Systems:

1. Installation & Calibration:

- Install and calibrate instrumentation equipment, including flow meters, pressure sensors, temperature transmitters, and level sensors.

- Set up and configure control systems, including PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems).

2. Troubleshooting & Testing:

- Troubleshoot and repair instrumentation equipment to ensure accurate readings and safe operation.

- Perform calibration and adjustment of instruments to meet system specifications.

3. System Integration:

- Ensure proper integration of electrical and instrumentation systems within the control room or automation network.

- Assist in the configuration and maintenance of control panels and process control systems.

We are looking for an experienced E&I Technician to support the installation, maintenance, troubleshooting, and repair of electrical and instrumentation systems for Power Plant and Oil & Gas projects. The ideal candidate will have a strong background in both electrical and instrumentation systems, a solid understanding of industry standards, and the ability to work safely in complex environments.

Key Responsibilities:

Electrical Systems:

1. Installation & Maintenance:

- Install, maintain, and repair electrical systems, including power distribution, lighting, motors, and electrical panels.

- Inspect and test electrical systems to ensure compliance with safety and operational standards.

2. Troubleshooting & Repair:

- Diagnose and repair faults in electrical systems, including switches, circuit breakers, and wiring.

- Conduct preventive maintenance on electrical components to avoid downtime.

3. Wiring & Connection:

- Ensure correct wiring and connections for electrical circuits, following blueprints and schematics.

- Assist in the installation and commissioning of new electrical systems and equipment.

Instrumentation Systems:

1. Installation & Calibration:

- Install and calibrate instrumentation equipment, including flow meters, pressure sensors, temperature transmitters, and level sensors.

- Set up and configure control systems, including PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems).

2. Troubleshooting & Testing:

- Troubleshoot and repair instrumentation equipment to ensure accurate readings and safe operation.

- Perform calibration and adjustment of instruments to meet system specifications.

3. System Integration:

- Ensure proper integration of electrical and instrumentation systems within the control room or automation network.

- Assist in the configuration and maintenance of control panels and process control systems.

Primary services include hardware maintenance, installation, basic software support (inhouse training provided)

Manage customer incidents as assigned; Build working relationships with customers (end user).

Responsible for ownership of all customer issues/needs that are voiced or observed and acts appropriately;

Verify that the site environment meets the requirements prior to installation or rollout; Install customer systems according to the installation plan, certify that the installation or setup of the product meets the customer's requirements

Analyze and correct all technical problems on equipment within assigned customer accounts.

Perform periodic preventive maintenance routines on products and installs modifications to equipment.

Routine jobs to overhauls and maintenance repair. May also perform required modular swaps and unit replacements or perform preventative maintenance services

Responsible to response to a customer call on time and to keep customer informed during the problem resolution process. Perform service verification and customer satisfaction surveys relating to the situation

Responsible for capturing detailed customer asset information and other data required to complete any invoicing or billing activities

Responsibilities

• Attending to clients' technical matter and servicing
• Perform maintenance, repair or overhaul of Air compressor
• Lead the team of technicians and train in troubleshooting, diagnostics and best practices
• Submission of Service Reports timely manner.
• Air Compressor and Dispenser Repair

Requirements:

• Knowledge in electrical and air conditioning
• Similar experiences will be an added advantage
• Engineering Diploma or equivalent, NITEC with relevant experience will be considered
• Salary commensurate with experience and education level
• Knowledge of Vacuum pumps, blowers or other rotating equipment
• Minimum experience : 2 years
• Possess a valid Class 3 driving license

Interested applicant please send resume with expected remuneration to [email protected]

Job Overview

Ensure that routine maintenance is performed in order for the Hotels equipment to be operated with maximum efficiency to achieve customer and guest satisfaction.

At Holiday Inn® we want our guests to relax and be themselves which means we need team members to:

• Be you – by being natural, professional and personable in the way you are with people
• Get ready – by taking notice and using your knowledge so that you are prepared for anything
• Show you care – by being thoughtful in the way you welcome and connect with guests
• Take action – by showing initiative, taking ownership and going the extra mile

DUTIES AND RESPONSIBILITIES

FINANCIAL RETURNS:

• Inform superior of the status of repairs and pending costs and indicate when it would be reasonable to consider replacement
• Record daily service work, including maintaining individual replacement costs along with time/task labour hours cost

PEOPLE:

• Perform all routine preventative maintenance and curative maintenance
• Order and monitor fuels, lubricants and repair parts
• Maintain clean and tidy plant rooms
• Maintain a level of broader knowledge which enables you to handle minor problems in all fields of the department
• Attend to all types of repair and maintenance work in the Hotel premises, including any new additions / extensions to the Hotel or any other properties maintained by the Hotel
• Assist with the implementation of the hotel’s preventative maintenance system and repair log system
• Participate in instructing colleagues on the proper operation, safety procedures and cleaning of all equipment
• Conduct and/or participate in staff meeting regarding proper operating and maintenance practices of equipment

GUEST EXPERIENCE:

• Repair and maintain guest room facilities, light facilities, furniture and equipment
• Prioritize work in line with guest requests and management

RESPONSIBLE BUSINESS:

• Perform all routine preventative maintenance and curative maintenance
• Order and monitor fuels, lubricants and repair parts
• Maintain clean and tidy plant rooms
• Maintain a level of broader knowledge which enables you to handle minor problems in all fields of the department
• Attend to all types of repair and maintenance work in the Hotel premises, including any new additions/ extensions to the Hotel or any other properties maintained by the Hotel
• Perform any other ad-hoc duties as assigned by Chief Engineer or Asst. Engineer.
• Demonstrate Awareness of OH&S policies and procedures and ensure all procedures are conducted safely and within OH&S guidelines
• Be aware of duty of care and adhere to occupational, health and safety legislation, policies and procedures
• Be familiar with property safety, first aid and fire and emergency procedures and operate equipment safely and sensibly
• Initiate action to correct a hazardous situation and notify supervisors of potential dangers
• Log security incidents and accidents in accordance with hotel requirements

ACCOUNTABILITY

You are responsible for ensuring that routine maintenance is performed in order for the Hotels equipment to be operated with maximum efficiency to achieve customer and guest satisfaction. This is done under the general direction of the Assistant Chief Engineer/ Shift Leader, and within the limits of established InterContinental Hotels & Resorts and hotel’s policies and procedures. You will also help to promote a desired work culture around our Winning Ways of the InterContinental Hotels Group and embrace the IHG Commitment.

QUALIFICATIONS AND REQUIREMENTS

Minimum 2 to 3 years of relevant experience with related NTC certificates. Able to speak and write English with fairly good interpersonal and communication skills. Independent worker as well as a good team player.

Position Overview

GoldPhield is looking for a Business Development Manager with a strong focus on identifying and driving opportunities in battery cells for electric vehicles (EV) and battery energy storage systems (BESS) projects. This role is ideal for a professional with a proven ability to navigate complex markets, establish strategic partnerships, and drive growth in the renewable energy and mobility sectors.

Key Responsibilities

• Strategically identify and develop opportunities to expand the company’s footprint in the Indian market, focusing on EV and BESS solutions.
• Conduct detailed market analysis to identify trends, challenges, and growth areas within the energy storage and electric mobility sectors.
• Cultivate and maintain strong relationships with stakeholders such as HQ teams, OEMs, distributors, JV partners, and other industry players.
• Work closely with technical teams to align product offerings with market needs and regulatory standards.
• Lead the development of tailored proposals and negotiations to secure contracts and establish lasting partnerships.
• Monitor performance metrics, provide market intelligence, and deliver actionable recommendations to guide strategic decisions.
• Represent the company at industry gatherings, enhancing its visibility and building professional networks.

Skills and Qualifications

• Bachelor’s degree in engineering or a related field; knowledge of renewable energy, BESS, or EV markets is a plus.
• 7-10 years of B2B business development or sales experience, preferably in the energy or technology sectors.
• Demonstrated ability to build strategic partnerships and manage complex sales cycles.
• Results-oriented, with strong problem-solving and interpersonal skills.
• Proactive, adaptable, and comfortable operating in a fast-paced, dynamic environment.
• Willingness to travel frequently within the region to meet business needs.

Why Join Our Talent Pool?

• Stay updated on exclusive job opportunities in your field.
• Be the first to know about new openings that match your skills and experience.
• Receive career advice and industry insights from our experienced recruitment team.

For more updates, please follow our LinkedIn Page: https://linkedin.com/company/gold-phield

We regret to inform you that only shortlisted candidates will be contacted.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Salary range: S$ 3,600 – 4,300+ (Depends on exp)
• 5 working days
• Monday - Friday -8:30am - 5:30pm
• Tuas

Human Resource Management

• Manage end-to-end recruitment, onboarding, and employee orientation.
• Foster a positive work culture, address grievances, and handle disciplinary actions.
• Ensure accurate payroll, benefits administration, and compliance with labor laws.
• Prepare and submit statutory claims and tax declarations.

Office Management

• Oversee daily office operations, manage supplies, and facilities.
• Coordinate with departments to improve efficiency and organize meetings/events.
• Ensure workplace safety, implement health protocols, and address emergencies.

ERP System and IT Support

• Monitor ERP system performance, ensure data integrity, and maintain functionality.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Reading blueprints and technical diagrams to determine the placement of outlets and fixtures

Installing wiring, outlets, and controls

Maintenance of electrical systems

Inspecting transformers and circuit breakers to ensure they are up to code

Identifying electrical problems using specialized tools like voltmeters, cable testers, thermal scanners, and ammeters

Repairing and replacing wiring and equipment using hand and power tools such as screwdrivers, saws, drills, wire strippers, and conduit breakers

Directing and training fellow workers to install, maintain, and repair wiring and systems

Following state and local building regulations

Aerospace Component Engineering Services (ACES) Pte Ltd is a joint venture between SIA Engineering Company and Parker Aerospace specializing in the maintenance, repair and overhaul of hydraulic pumps, actuators, valves and flight controls for commercial aircraft.

As we enter a new phase of business growth and gearing up for new generation aircraft to support customers mainly in the Asia Pacific region, we are inviting suitable candidates to apply for the post of TECHNICIAN/TRAINEE TECHNICIAN for this exciting role as part of the Operations Team.

We require individuals with a high level of initiative, self-motivation, excellent problem-solving skills, to fulfil the role that involves testing, disassembly, inspection, repair and assembly of state-of-the-art hydro-mechanical aircraft components.

ACES will develop employees and equip them with hands-on skills and knowledge through training programs developed in-house or industry specific courses.

The ideal candidate should possess the following requirements to be considered for this position:

• ITC or Diploma in Aerospace, Mechanical or Mechatronics or relevant discipline obtained from a recognized institution;
• Fresh graduates will be considered for the post as well;
• Practical experience (disassembly, inspection, repair, assembly and acceptance testing) of mechanical and electro-mechanical components would be preferred but not mandatory;
• Ability to interpret electrical wiring schematics, hydraulic system schematics and single-line diagrams;
• Proficiency in the English language such as reading and simple reporting are required;
• Working knowledge of MS-Office applications on Windows platform.

Responsibilities

• Prepare correspondence emails, quotations, contract agreements, letters, documents, purchase orders, reports etc.

• Work with other departments/divisions and companies

• Coordinate administrative work within department

• Prepare reports by collecting all relevant information

• Handle the collation and submission of documents to clients / government agencies

• Offer constructive solutions to superiors when problems arise.

• Undertake any other ad-hoc tasks and duties as and when assigned by superior.

Working hours: 10:30am to 7:30pm (Monday to Friday)

10:30am to 3:30pm (Sat) (Alt Sat)

Adecco is partnering with an established Semiconductor & Electronics company. They are looking for a Senior System Analyst (SAP B1) with practical expertise and consulting experience in SAP B1 HANA implementation and functional support to join their regional IT team.

The Job:

• Lead and manage the end-to-end SAP Business One (SAP B1) implementation process, including planning, configuration, integration with third-party systems, and post-implementation support.
• Configure and optimize SAP B1 modules to meet organizational needs, support data integration via APIs, and ensure seamless reporting through tools like Crystal Reports and SQL.
• Provide user training, technical support, and troubleshoot ERP-related issues while collaborating with cross-functional teams to align the system with business goals.
• Oversee vendor management, change management, and master data administration while driving continuous improvements and process optimizations.
• Ensure IT governance by preparing policies and documentation to support audits and maintain operational compliance.

Requirements:

• A bachelor's degree in Computer Science, Information Systems, or a related field, along with excellent English communication and proposal writing skills, is mandatory.
• Candidates should have 5-7 years of experience in ERP implementation, configuration, and support, with expertise in SAP B1, system troubleshooting, and integration methodologies.
• Proficiency in server setups, database management, Crystal Reports, SQL Query Generator, and SAP B1 HANA DB is required, alongside familiarity with server environments (Windows, Linux) and network infrastructure.
• Strong problem-solving skills, project management experience, and the ability to align ERP functions with business needs are essential.

Next Steps:

• Apply through this application stating the job you are applying for and expected compensation package.
• Shortlisted candidates will be contacted via a confidential chat.

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Overview:

This is an opportunity to directly work in a health services sector as an Application Support Engineer (System Analyst).

Responsibilities:

• Provide level 2 application support, liaise with level 1 and level 3 support teams within the company and other organizations to resolve incidents and recover service.
• Provide 24/7 primary application maintenance and support.
• Work with level 3 support teams to fulfill service requests and change requests.
• Document and track incidents, service requests, change requests and provide regular progress updates.
• Coordinate closely with support teams to test and deploy defect fixes, enhancements and patches to production environment.
• Lead and coordinate regular system maintenance and upgrade activities such as monthly maintenance, patching and hotfix deployments.
• Review and update project documentation and processes.
• Work with procurement team and vendors to procure necessary software and services.

Requirements:

• Must have Degree in Computer Science, Computer Engineering or equivalent.
• At least 1 year experience in application support and operations.
• Good understanding of IT technologies, methodologies and processes including SDLC and Agile.
• Experience in application support and maintenance for mobile applications and web portals.
• Good track record in managing business users and working with other support teams.
• Strong analytical skills and ability to work independently.
• Experience in healthcare industry is an added advantage.

Morgan McKinley Pte Ltd

Cedric Ferreras

EA Licence No: 11C5502

EA Registration No. R1870889

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.