Reporting to the Manager in the Engineering Department, the selected incumbent shall assist the Engineering team in the following tasks:

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.

Note:

Candidate MUST BE willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Contract Period:

• 1 Feb 2025 to 31 Mar 2028 (38 Months)

Deployment:

• Either one of the shifts below:
• a. Early shift: 7.15 am to 4.45 pm (Monday to Thursday); 7.15 am to 4.15 pm (Friday);
• b. Late shift: 9.00 am to 6.30 pm (Monday to Thursday); and 9.00 am to 6.00 pm (Friday).

Scope of Works:

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Requirements:

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. Shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.
5. Independent worker and a good team player who is comfortable in working in a fast-pace and dynamic environment.
6. Good interpersonal skills with a customer-oriented mindset.

ALG is currently hiring NDT Technicians for our internationally renowned airline client based in Singapore. This role will be on a long-term contract with option extension and a chance for permanent role conversion should you excel.

Job Responsibilities:

• Assist NDT and BSI Authorisation Holders to perform NDT and BSI inspections on aircraft structures and components/parts/engines/APUs.
• Carrying out and certifying inspections in the NDT method specified in their authorization where applicable
• Maintain good housekeeping, documentation, equipment, and tools to ensure compliance with airworthiness standards
• Maintain a high level of situational awareness and by fully compliant in all matters related to general safety and personal safety as guided by company and industrial practices
• Ensure validity of calibration of all inspection and test equipment before use
• Conduct regular checks on chemical expiry and maintain its records
• Carry out any other duties as assigned by Engineering Supervisor (NDT).

Job Requirements:

• Ideally has 1 - 2 years of Aerospace experience and possess NAS 410/ EN 4179 Level I certification on FPI. Other FPI Level 1 certificates can be considered if the candidate can demonstrate his proficiency.
• Able to perform rotating day and night shift.
• Able to effectively utilize lifting devices.
• Fresh entry level candidate preferably with educational qualification in Aviation can be considered.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23113794

RESPONSIBILITIES

• Identify and troubleshoot issues in circuit boards using testing tools like oscilloscopes and multimeters.
• Perform visual inspections and utilize specialized tools to find defects or faults on the board.
• Solder and desolder components to replace damaged or malfunctioning parts.
• Use rework stations and hot air tools for efficient component removal and replacement.
• Conduct functionality tests on repaired boards to confirm they meet required standards.
• Operate automated test equipment (ATE) and custom test setups to verify repairs.
• Keep comprehensive records of repair work, including fault details and resolution steps.
• Communicate recurring issues to design and manufacturing teams to support improvements in future designs.
• Keep current with new repair methods and tools.
• Engage in training sessions and workshops to advance technical skills.
• Parts teardown, re-assembly, re-certification and qualification
• Troubleshoot PCB Electronics

REQUIREMENTS

• Miniumum Diploma / Degree in Electronic/Electrical Engineering
• At least 3 years of experience in troubleshooting of PCB /PCBA / Electronic or Semiconductor Components.
• PCB repair and maintenance in a huge advantage.
• Strong diagnostic and troubleshooting skills.
• Excellent communication and customer service skills.
• Ability to work independently and in a team environment.
• Familiarity with industry standards and best practices for PCB maintenance.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Work Arrangements

• AM Shift (7AM to 430PM)
• PM Shift (430PM to 130AM) $25 Dollar shift + transport back home
• Rotating swing shift (mix or AM & PM)

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical or Electrical Engineering
• Relevant experience would be advantageous
• Relevant internship / academic background would be considered

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

We are looking for suitable candidates to apply for the position of Veterinary Surgeon, Veterinary Technician/Nurse, and Receptionist.

Applicants should preferably have prior experience in the industry and possess an excellent work ethic.

Our clinics are spacious, fully computerised and equipped with in-house biochemistry and haematology IDEXX machines, iM3 dental machines, digital radiography, ultrasound, and endoscope. There are designated wet prep areas for minor procedures and fully equipped operating theatres with isoflurane anaesthetic machines.

We are committed to the provision of professional high-quality patient care and treatment, and seek individuals who are compassionate, ethical, and have a real love for animals. Applicants must have good interpersonal skills and a positive and friendly attitude.

Successful applicants can look forward to a generous remuneration package.

Please email a copy of your resume (Singaporeans or PR only) and expected remuneration to Vets for Life Animal Clinic ([email protected])

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Mice Elite Pte Ltd is looking for an experienced Instrument Technician to join our team.

The instrument technician will be responsible for the commissioning and testing of all the instruments for various Process System for a new build vessel. These devices are Field Process Transmitter, F&G, PAGA, CCTV, Control Valve etc.

They must be able to perform troubleshooting and calibration of field instrument. The Technician must also be able to use calibration equipment correctly to carry out the task of calibration.

They should understand the concept and principles of process measurement to effectively carried out the tasks and to write and submit report.

Responsibilities:

· Testing and commissioning of process instruments/ transmitter

· Calibration of process instruments/ transmitter

· Report submission of completed activity

· Troubleshoot and problem solving

· Ensure all safety protocols are followed

· Prepare, review and submit reports on job completion

Requirements:
• ITE , diploma in engineering or related field
• 8+ years of experience in instrumentation and control systems
• Proven ability to troubleshoot and diagnose problems
• Knowledge of safety protocols and procedures
• Excellent communication and problem-solving skills
• Ability to work independently and in a team environment

Bottom of Form

If you are interested in this position, please apply with your updated resume. We look forward to hearing from you.

You should have a passion in automotive and enjoy driving around Singapore to perform the following tasks:

Key Responsibilities:

• Carry out basic diagnosis, repair, maintenance and fault findings for the Electric Vehicles (EVs)
• Ensure the cleanliness of the interior and exterior of the EVs
• Update onboard PC and changing of SIM card
• Balancing / Shifting of EVs to the stations when required
• Handle service anomalies such as unplugged cars, cars parked outside of stations, lost & found, etc
• Report on the information system via PDA
• Communicate with customers about our service when required

Key Requirements:

• NITEC in Automotive / Electrical Engineering
• Candidate with hands-on automotive experience will be an added advantage
• Possess a valid Class 3 / 3A / 3C license and a clean driving record
• Night Shift work 2100 - 0645, required to work on weekdays and / or weekends (5 days, 44 hours work week) - shift allowance provided

Benefits:

• AWS & Variable Bonus
• Shift Allowance
• Medical Insurance benefits

--- Design, control, and implement electrical systems and products

--- Manage engineering projects and deliver them on time

--- Define and discuss customer needs and requirements

--- Ensure that installations and applications are in line with customer needs and safety standards

Requirements and skills:

--- Proven expertise as an electrical engineer

--- Understanding of electrical engineering codes and safety standards

--- Problem-solving abilities

--- Attention to detail

--- Strong organizational and communication skills

Roles & Responsibilities

· Assist Maintenance Engineer in overseeing all maintenance and works

· Attend to complaints call of equipment breakdown from clients

· Supervise sub-contractors and service contractors at site

· Perform any other duties assigned by the Maintenance Engineer

· Maintain and follow up on Service Contracts, Service Reports and Checklist

· Plan, schedule and manage the project efficiently and to ensure timely completion

Qualifications / Requirements

· At least Nitec in Engineering

· 2-3yrs of working experience in air-conditioning and related M&E systems

· Self-motivated and a good team player

You will be involved in the preventive and corrective maintenance of anaesthesia-related equipment and anaesthesia information systems, including educational activities involving such equipment. In addition, you will support Anaesthesiologists in delivering safe, efficient, and cost-effective anaesthesia care.

Requirements

• Diploma in Electronic / Electrical / Mechanical Engineering or Higher NITEC/NITEC with at least 3 years’ relevant experience
• Good team player with excellent interpersonal, organizational and communication skills
• Experience using and troubleshooting desktops, laptops, iPads and connectivity between electronic devices will be an advantage.

JOB PURPOSE

As a member of the production shift team, the job holder will operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost effective manner.

REPORTING RELATIONSHIP

The job holder will report to the Shift Supervisor and his deputy working alongside with other chemical technicians.

KEY ACCOUNTABILITIES

1. Operate the different streams of the plant for their specific processes.

Each of these processes comprises the following activities.

a) Handover checks computerised and/or manual.

b) Obtaining, following and completing process related documentation.

c) Pre and post batch cleaning of vessels and lines.

d) Pre batch checks.

e) Charging vessels either manually or via a pump.

f) Post charging checks and taking corrective action where necessary.

g) Adjusting and monitoring process conditions as required to start the process.

h) Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.

i) Carrying out routine sampling and Bulk packing and testing of samples as required.

j) Recognise end point of the reaction and altering process parameter to stop reaction.

k) Transferring product to the next stage.

2. Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.

3. Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.

4. Maintain product separation and accurate labelling of all documents, bags and vessels at all times.

5. Carry out routine checks and scheduled cleaning procedures including cleanrooms.

6. Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.

7. Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.

8. Perform basic maintenance of equipment using tools such as TPM.

9. At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.

10. To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.

11. To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.

12. Maintain housekeeping of the plant and provide suggestions for improvements.

13. To operate ancillary facilities e.g. water system, tank farms, solvent recovery etc.

CONTACT WITH OTHERS

Internal - Sanofi staff

External - Contractors/Suppliers/Vendors

JOB KNOWLEDGE

- Minimum NITEC or Higher NITEC in Chemical Processing or related

PREREQUISITES

- Must be prepared to work shifts.

- Must be resourceful, conscientious, dedicated and a good team player.

- Adequate formal and on-the-job training on the chemical processes will be given.

TECHNICAL SKILLS

1. Use of process control systems for operation of plant equipment

2. Operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc

3. Cleaning and maintaining cleanliness and condition of cleanroom facility

4. Implement cleaning and changeover of equipment

5. Apply GMP in manufacturing processes

6. Manage materials and materials flow according to established SOP and BRS

7. Able to identify and manage hazards that may occur within biopharmaceutical plant

8. Verify that routine manufacturing processes are consistently within a state of control

9. In-process analysis to verify that results are within targets

10. Able to perform line tracing using P&ID

11. Able to do simple mechanical task such as filter changes.

GENERIC SKILLS

1. Communicate information with others to respond to general inquiries and obtain specific information

2. Digital literacy: Able to use computer software to perform basic functions

3. Interpersonal skills to be able to work with the team and with other departments

4. Basic problem solving to solve simple problems

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Singaporean Only

Job descriptions

• Carrying out maintenance, repairing and servicing tasks (Electrical /Aircon / Mechanical / Building / Repairs).
• Carry out preventive / breakdown and corrective maintenance of M&E works or Aircon or Building.
• To carry out maintenance operations for facilities or buildings , including troubleshooting and repairing mechanical, electrical, and plumbing systems
• Attend to defects and customers' complains promptly. Respond to any fault reports, client requests, or any breakdowns efficiently.
• Performing regular maintenance and repairs on the building facilities or systems to ensure smooth operation. Reporting any fault issues to the supervisor.
• Conduct preventive checks and troubleshooting on the M&E systems.
• Record or inform supervisor of any faults or issues during routine checking.
• Perform any other ad hoc duties assigned

Requirements

• Minimum 2 years and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Building / Facility Management or maintenance
• Shift works , 2 Day shifts , 2 Night Shifts , 2 Off days.
• East Side - report for day shift location in Changi . Northern Central - report for night shift near Whitley Road.
• SIngaporean only

Windows and Linux Engineer

Job Role/Level Engineer, System Engineering

Mandatory Skills Red Hat Enterprise Linux (RHEL)

Preferred Skills Azure, VMware

Brief Job Description

• Plan, execute, monitor and control the various technical aspect of the project.

• Manage or participate in new setup or upgrade of system/network infrastructure projects.

• Responsible for supporting operational systems satisfying contractual Service Level Agreement

• Perform and manage routine preventive maintenance and operational activities

• Provide project documentation and reports

• Diagnose and rectify technical issue

• Managing and Operating Red Hat Linux, Windows VM Infrastructure

o Installation/Configuration/Hardening/Maintenance/Patching

o Maintain System Security

o Advanced Troubleshooting

o Performance Tuning

o Capacity Management

o Preventive/Proactive Support

o Incident/Change/Problem Management

o Provide system administration support and guidance for development team’s app configuration tasks

o Veritas Clustering Setup on RHEL VM would be added advantage

o Chef Automation would be added advantage

o AWS EC2 maintenance

• Managing and Operating VMware vSphere IT infrastructure

Other IT Infrastructure Related Tasks

• Red Hat Enterprise Linux (RHEL) and Windows Administration

• Professional understanding of networking related to RHEL and Windows

• Professional understanding of SAN Storage related to RHEL and Windows

• AWS Certified Solution Architect will be an advantage

• Good understanding of large Data Center Facilities operation

• Hands-On experience supporting various Infrastructure agents like NetBackup

• (Mid-Level) vSphere 7.x.

• Cross-team collaboration with storage, network, security and application delivery

• Technical leadership quality to handle technical challenge and sensitive situations

• Integrate the server automation process either by custom scripts or via third-party solutions(Ansible)

• Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

• Strong communications skills

• Excellent spoken and written English communication skills

Candidates with at least 1 year of relevant experience in RHEL preferred.

Candidates with some work experience and possess exposures/ knowledge in RHEL are welcome too.

Summary

You will be working with our client who specialises in the healthcare space, where you will be part of the product office team within the Software Development department. You will be supporting a couple of national level healthcare projects. You will also be collaborating with various stakeholders and be involved in integrating data across multiple systems and clusters.

Responsibilities

• Elicit business requirements from external and internal stakeholders via policy and requirement discussion sessions.
• Manage demand from multiple stakeholders and able to control, balance and agree upon a controllable delivery scope.
• Conduct user requirement scoping, and analysis, involving functional, integration, and non-functional requirements.
• Work closely with technical solution teams to assess feasibility, propose solution options and recommendation to address business and operational needs.
• Deliver functional design including workflow analysis, prototypes, business logic flowchart and interface mapping.
• Communicate clearly and concisely with technical design, development, test, and operations support teams on the requirements scope and functional design details to ensure that the final product accurately addresses business needs.
• Provide requirement and functional design clarifications to delivery team members throughout the delivery process.
• Plan and conduct internal UAT based on business workflow and user scenarios if required
• Plan and conduct training to end users, and internal support teams as required.
• Support post-production deployment verification for any product feature release.

Requirements

• Degree in Computer Science, Information Technology, Management of Information Systems or related discipline.
• Minimum 4 years IT system implementation and integration experience
• Excellent analytical skills, able to understand and articulate business problem statement and use cases concisely
• Self-motivated and able to take direction and work resourcefully, quickly, and independently
• Capacity to perform under pressure to handle difficult situations and issues swiftly
• Ability to build good working relationship at all levels
• Experience in Healthcare domain is preferred

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at [email protected] for more information.

Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.

Morgan McKinley Talent Solutions

Morgan McKinley Pte Ltd EA Licence No: 11C5502

EAP Registration No: R2196712

EAP Name: Chew Kai-Xinn

Position: Sales Executive ( Energy Storage System )

• Location: Near West Coast Plaza
• Working Day: Monday to Friday, from 8am to 5pm or 9am to 6pm
• Salary: up to $5,000 + AWS + VB + Transport Allowance $400 + Mobile Allowance $100

Job Description & Requirements

Seeking a dynamic and experienced Sales Executive to join our team and drive sales for our Battery Energy Storage Systems (BESS) and Energy Storage Systems (ESS) product line across the Southeast Asian region. The ideal candidate will have a strong technical background and a proven track record in energy storage or related industry.

Requirement:

• Minimum of 5 years of experience in sales, preferably in the energy storage industry.
• Strong technical background and understanding of BESS/ESS products.
• Willingness to travel across the Southeast Asian region as needed.
• Bachelor’s degree in engineering, Technology, or a related field.
• Possess valid driving license and own transport

Job Scope:

• Develop and implement sales strategies to achieve revenue targets.
• Identify and pursue new business opportunities in the BESS/ESS market.
• Build and maintain strong relationships with clients, partners, and stakeholders.
• Provide technical expertise and product knowledge to clients.
• Prepare and deliver compelling presentations and proposals.
• Stay updated on industry trends, market developments, and competitor activities.
• Collaborate with the marketing and product development teams to align sales strategies with business goals.

Chin Wai Loon Reg No: R24121618
The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Primary Job Responsibilities

• Provide Technical support for Windows servers and network to ensure maximum uptime.
• Manage Cloud infrastructure and services such as Office 365, Veeam, SpamTitam, Cloudflare etc.
• Administer security products such as firewall, spam filter, phishing test tool etc.
• Design and maintain Sharepoint Intranet.
• Provide desktop support and standby duty.

Required Skills

• Experience in Windows 2012 and abv administration, patching, backup and restore, including Hyper-V
• Experience in network administration such as VLAN setup, switching, routing, DBS etc.
• Experience in Cloud technologies and cybersecurity concepts.
• Experience in desktop hardware and software diagnostic, configuration and support.
• Diploma/Degree in IT with at least 3 years experiences.Network/System Support

Company 2 ways transport provided - (pick up and drop off at Jurong East and Lakeside)

No OT required

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are looking for an experienced E&I Technician to support the installation, maintenance, troubleshooting, and repair of electrical and instrumentation systems for Power Plant and Oil & Gas projects. The ideal candidate will have a strong background in both electrical and instrumentation systems, a solid understanding of industry standards, and the ability to work safely in complex environments.

Key Responsibilities:

Electrical Systems:

1. Installation & Maintenance:

- Install, maintain, and repair electrical systems, including power distribution, lighting, motors, and electrical panels.

- Inspect and test electrical systems to ensure compliance with safety and operational standards.

2. Troubleshooting & Repair:

- Diagnose and repair faults in electrical systems, including switches, circuit breakers, and wiring.

- Conduct preventive maintenance on electrical components to avoid downtime.

3. Wiring & Connection:

- Ensure correct wiring and connections for electrical circuits, following blueprints and schematics.

- Assist in the installation and commissioning of new electrical systems and equipment.

Instrumentation Systems:

1. Installation & Calibration:

- Install and calibrate instrumentation equipment, including flow meters, pressure sensors, temperature transmitters, and level sensors.

- Set up and configure control systems, including PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems).

2. Troubleshooting & Testing:

- Troubleshoot and repair instrumentation equipment to ensure accurate readings and safe operation.

- Perform calibration and adjustment of instruments to meet system specifications.

3. System Integration:

- Ensure proper integration of electrical and instrumentation systems within the control room or automation network.

- Assist in the configuration and maintenance of control panels and process control systems.

We are looking for an experienced E&I Technician to support the installation, maintenance, troubleshooting, and repair of electrical and instrumentation systems for Power Plant and Oil & Gas projects. The ideal candidate will have a strong background in both electrical and instrumentation systems, a solid understanding of industry standards, and the ability to work safely in complex environments.

Key Responsibilities:

Electrical Systems:

1. Installation & Maintenance:

- Install, maintain, and repair electrical systems, including power distribution, lighting, motors, and electrical panels.

- Inspect and test electrical systems to ensure compliance with safety and operational standards.

2. Troubleshooting & Repair:

- Diagnose and repair faults in electrical systems, including switches, circuit breakers, and wiring.

- Conduct preventive maintenance on electrical components to avoid downtime.

3. Wiring & Connection:

- Ensure correct wiring and connections for electrical circuits, following blueprints and schematics.

- Assist in the installation and commissioning of new electrical systems and equipment.

Instrumentation Systems:

1. Installation & Calibration:

- Install and calibrate instrumentation equipment, including flow meters, pressure sensors, temperature transmitters, and level sensors.

- Set up and configure control systems, including PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems).

2. Troubleshooting & Testing:

- Troubleshoot and repair instrumentation equipment to ensure accurate readings and safe operation.

- Perform calibration and adjustment of instruments to meet system specifications.

3. System Integration:

- Ensure proper integration of electrical and instrumentation systems within the control room or automation network.

- Assist in the configuration and maintenance of control panels and process control systems.

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

· Plan, coordinate and oversee the installation and maintenance of internal systems of hardware, software and networks.

· Implement and manage security protocols, including access controls, backups and firewalls.

· Monitor, troubleshoot IT systems, including security system and networking.

· Manage servers, email systems, CCTV, HR system and others.

· Set up user accounts and PC workstations, Apps etc.

· Ensure the efficiency and reliability of IT infrastructure.

· Support web development and maintain Company portals.

· Maintain and support the Dynamics NAV ERP system.

· Conduct programming and develop Apps to support business operation.

· Provide IT support to internal and external users as needed.

· Maintain all IT related documentation and policies up to date.

· Perform other tasks as required.

Requirements:

· Minimum Diploma in IT, Computer Engineering, or a related field.

· At least 2 to 3 years of programming experience.

· Knowledge of system security, networking and database management.

· Good programming skills, with app development experience is a plus.

· Familiarity with access control, CCTV, and alarm systems is an advantage.

· Highly adaptable with a fast-learning ability.

· Open to young professionals and fresh graduates, eager to learn and grow.

Working Hours: 8am to 5.30pm (Monday to Friday)

Work Locagtion: 5 Jalan Tepong

(Transportation is provided, pick-up at Lakeside MRT station)