Associate Medical Laboratory Technologists (AMLT) are responsible for the daily operations of the laboratory which include phlebotomy, electrocardiogram, spirometry and clinical laboratory work.

Responsibilities

• Perform daily operations of the laboratory
• Perform all procedures in accordance with laboratory standard operating procedures (SOPs)
• Perform phlebotomy, Electrocardiogram (ECG) and spirometry in an accurate, efficient and professional way.
• Perform Point of Care Testing (e.g. Prothrombin Time, glucose) and clinical laboratory tests such as urinalysis (e.g. Urine FEME, dipstick, pregnancy), haematology (e.g. full blood count, peripheral blood film, erythrocyte sedimentation rate, prothrombin time), biochemistry (e.g. HbA1c, neonate bilirubin), microscopy examination (e.g. fungal smear, high vaginal swab) independently.
• Ensure specimen identification, processing and storage of test specimens are in consistent with good laboratory practices
• Perform and verify quality control for all analysers prior to patients sampling
• Use of Laboratory Information System (LIS) to perform functions such as result entry, result validation and tracking for outstanding tests
• Ensure all test results provided for clinicians are accurate and reliable
• Ensure analysers/equipment are functioning properly and are well maintained.
• Notify medical technologist/lab in charge when instrument malfunction and make arrangements with BME or instrument vendor to service the instrument
• Notify inventory person in charge when reagents and stocks supplies run low.
• Perform and record internal and external quality controls and calibrations. Troubleshoot outliers in accordance to work instructions.
• Ensure ‘critical value’ are reported to the relevant personnel within 30 minutes
• Ensure daily maintenance and QC records are up to date.
• Ensure compliance to hand hygiene, workplace safety, International Patient Safety Goals (IPSG) and International Standardization of Organizations (ISO) and other applicable regulatory and accreditation requirements of the laboratory.
• Provide prompt and courteous service in person or over telecommunication to all external and internal customers (e.g patients, doctors, service providers, colleagues).
• Report adverse incidents and all workflow anomaly to supervisor
• Observe strict NUHS personal data protection act and observe internet/intranet cybersecurity guidelines.
• Perform other functions as delegated by supervisor and/or lead laboratory

Requirements

• Recognized Diploma in Biomedical Science, Clinical Laboratory Science or other relevant fields
• At least 1-3 years of experience in laboratory environment and/or relevant experience in phlebotomy preferred
• Good verbal and written communication skills
• Ability to communicate in vernacular languages are an added advantage
• Ability to multi-task and work in a fast-paced environment
• Team player with good interpersonal skills

Patient Service Associates (PSA) provide frontline counter services to patients. PSA is to assist patients by checking patient’s service/order requirement, managing patient queues, handle basic enquiries (e.g. appointment booking) and to provide administrative support to medical technologists and radiographers.

Job Responsibilities:

• Responsible for reception of all appointment and walk-in patients at the Diagnostics counters
• Ensure 2 patients’ identifiers (NRIC & Name) are verified for all patients when handling patient registration electronically (i.e. EPIC, LIS, RIS, POS, BSS.) and verifying tests ordered by doctors.
• Accurate appointment scheduling / booking and registration for eligible mammogram patients via Breast Screen Singapore (BSS) portal
• Registration of mammogram patients are done accurately via BSS portal, including updating of patient particulars such as mailing address and contact number.
• Relevant instructions are communicated effectively to patients prior to their procedures/tests, chaperon patients to changing or counselling room where applicable.
• Handle enquiries and provide prompt and courteous service delivery to internal and external customers.
• Responsible for payment collection when assigned to cashier duties and ensure tally of end-of day sales with cash settlement and other transaction records.
• Ensure Medisave Authorization Forms (MAF) are filled in accurately with patients’ endorsement and approval, and all Medisave transactions are captured accurately in EASIPOS
• Accurate application of promotions and discount vouchers appropriately and to validate its utilization via EASIPOS
• Support administrative function to centre in-charge including but not limited to dispatching of lab and x-ray reports, proper record and documentation of courier services.
• Performing duties as assigned by reporting officer
• Meet customer service and quality KPI as determined by department
• Follow up and support reporting officer in handling patient relation issues
• Adhere to policy and standard operating procedure
• Accurate and meticulous in performing cashiering duty when assigned

Job Requirements:

• GCE “A”/ “O”/ “N” levels or Higher / NITEC qualification
• Service-oriented and patient-focused
• Proactive and resilient with the ability to work independently and in a team
• Ability to multi-task and work in a fast-paced environment
• Good writing, interpersonal and communication skills
• Aspire for service excellence and process improvements

Additional Information:

Working Hours : 42 hours/week (5.5 days work-week)

Working Location : NUHS Diagnostics Clinics (within National University Polyclinics at the Western region of Singapore)

Reporting to Centre-IC, Medical Technologist (MT) is responsible for the daily operations and administration of laboratory to ensure compliance to regulations and accreditation standards. This includes daily routine laboratory work, performing phlebotomy, electrocardiogram and spirometry. MT is responsible to maintain professional care to patients and works closely with NUP and other stakeholders.

Job scope

• Perform patient registration, specimen reception, preparation and packing of specimens
• Perform laboratory analysis (e.g. Urine microscopy, full blood count, HbA1c), operate and maintain instruments according to work instruction.
• Perform point-of-care testing, phlebotomy, ECG and spirometry procedures.
• Responsible to verify and report accurate results in timely fashion; investigates and reports any anomalies.
• Responsible to perform daily quality control check and troubleshoot as required.
• Ensure proper documentations and records for traceability (e.g. acknowledgement on QC and maintenance checklist after completion).
• Assist to resolve patient’s queries and escalate to centre-IC when necessary.
• Adhere to work safety guidelines and infection control protocols to ensure staff and patient safety.
• Assist centre-IC in tasks as assigned.

Qualification

Degree in Medical Laboratory/Biomedical Science or related fields.

Prior experience working at clinical laboratory at public or private healthcare establishment is advantageous but training will be provided

Experience in phlebotomy and heel prick sample collection will be advantageous but training will be provided

Effective communications and ability to converse in vernacular languages is an asset

Able to work in a fast-paced environment and with good problem solving skills

Possess positive attitude in resolving hostile and disgruntled patients professionally

Ability to multi-task and work under tight timelines

Good interpersonal relationship skills and enjoy working as a team

Computer literate – knowledge of MS Word, Excel and PowerPoint will be advantageous

Note : Candidates who are looking for Full Time/Part Time employment are welcome to submit the job application to us

Job Summary:

We are seeking an experienced Building Management System (BMS) Specialist to join our team. The successful candidate will be responsible for designing, installing, commissioning, and maintaining building management systems.

Responsibilities:

• Design, install, commission, and maintain BMS systems
• Configure and program BMS software and hardware
• Troubleshoot and repair BMS system issues
• Collaborate with stakeholders to identify and implement energy-efficient solutions
• Develop and implement BMS system training programs for users

Requirements:

• Bachelor's degree in Electrical Engineering, Computer Science, or related field
• 3+ years of experience in BMS design, installation, and maintenance
• Proficiency in BMS software and hardware, such as Schneider Electric, Siemens, or Honeywell
• Excellent problem-solving and analytical skills
• Strong communication and interpersonal skills

Note:

• Only shortlisted candidates will be notified.

Role and responsibilities:

• Support IT strategy relating to supply chain operations and systems
• Work with other Apps Lead to ensure proper system integrations and data integrity
• Identify and assess the use of Data Analytics, Robotics Process Automation, IoTs and AI
• Work with vendors and business stakeholders to design, build, implement and support Track and Trace Solution
• Conduct user requirements workshops for process discovery, process analysis and documentation of requirement specification to deliver innovative solutions for supply chain and site operations
• Prepare Process Design Document (PDD) and ensure its timely sign-off by stakeholders
• Coordinate with internal and external developers on Solution Design Document (SDD)
• Manage enhancements, system fixes, project risks, mitigation and contingency
• Vendor Management on project and support matters
• Provide training to users and work closely with technical teams (Infrastructure & Security, Applications and EUC to ensure proper system security, performance, data integrity and compliance to established policies

Requirements:

• Bachelor’s degree in information technology or data science or supply chain management (SCM) or a related field
• Min. 5 years of experience in Supply Chain Managment and Logistics industry
• Proficient in the use of data analytics tools
• Familiar with RPA, AI technologies
• Have experience with of SCM applications like WMS, TMS, OMS and SAP MM
• Excellent communication and collaboration abilities
• Problem-solving skills and the ability to make quick decisions
• Knowledge of industry best practices and emerging trends in Supply Chain Management and Control Tower

Role & Responsibilities

Programme Management:

• Oversight of the IT programme, track the projects’ progress to ensure projects are on track and aligned with overall IT programme timeline.
• Identify, track and manage the risks, assumptions, issues and dependencies for the overall IT programme.
• Coordinate activities among different projects and supporting the system integration between systems.

Work Plan and Budgeting:

• Work with relevant parties (delivery teams, vendors, ops users, etc) to plan and budget the decommissioning of application systems that the hospital will no longer use.
• Work with relevant parties (delivery teams, vendors, ops users, etc) to plan and budget the decanting of hospital services / facilities (wards/beds/clinics/etc) within application systems.
• Work with relevant parties (delivery teams, vendors, ops users, etc) to plan, budget for application systems in the commissioning of new hospital services / facilities (wards/beds/clinics/etc).
• Collate business requirements of cluster stakeholders, including working with delivery teams for solution review board submissions, ITQ/RFP submissions, and approval papers.
• Work with delivery teams to obtain the costings, including review the cost reasonableness.
• Work with relevant parties (vendors, delivery teams etc) to advise users on adoption of technologies/systems/national initiatives.

Project Delivery:

• Work with relevant parties (delivery teams, vendors, ops users, etc) to procure, perform installation, setup, testing and full-dress rehearsals of application systems for the commissioning of new hospital services / facilities (wards/beds/clinics/etc).
• Facilitate and participate in cluster / institution workflow study, workgroup discussion to provide IT advice, including driving National IT initiatives adoption.
• Plan and track the required activities for IT readiness, deployment, and implementation.
• Tracking of key performance indicators for institution / cluster projects such as timely project delivery, quality of systems delivered, user satisfaction of systems delivered, etc.
• Management and reporting of project development, maintenance and support activities.
• Support users in user acceptance testing (UAT), and system integration testing between different systems.
• Work with users and delivery teams to resolve IT issues and timely resolution / implementation.
• Ensure IT systems and implementation adhere to the policies, standards, and guidelines. Supporting the Security risk Assessment and Solution Review Board (SRB) approval for projects.
• Support the activities for operation transition, business continuity planning (BCP), full dress rehearsal and hospital go-live.

Others:

• Perform a secretariat role for the Campus Development meetings.
• Prepare and present the required materials for relevant forums in the institution/cluster (eg. IT committees, management meetings, hospital steering comm meetings etc)
• Support and manage ad-hoc IT requests from institution/cluster, IT issues resolution etc.
• Support audit requests as raised from internal / external audits.
• Undertake any requests as directed and in alignment with organization objectives and goals.

Requirements

• Bachelor Degree in Computer Science or equivalent (IT related field preferred)
• Strong experience in project management
• Excellent problem solving skills (including troubleshooting in IT related context).
• Excellent written/communication and interpersonal skill
• Strong organisational and customer service skills
• Able to lead and work with cross functional teams

Job Description:

•  Configure, develop and maintain vulnerability tools and platform
•  Configure and test network security appliances (eg. Firewall, Link Encryptors)
•  Perform backup and upgrade of network appliance configuration and firmware
•  Develop network security diagram
•  Troubleshoot and debug issues that arise
•  Develop and maintain technical and configuration documentation
•  Perform standby duties as required

Education / Experience:

o Degree in IT / Computer Science / Engineering, or equivalent

o At least 1- 5 years of experience in IT implementation and maintenance support

Skill sets:

 Technically inclined and hands on

 Keen to pick up new technology and skillsets

 Experience in Vulnerability Assessment tools (eg. Nesses, NVM)

 Detailed configuring one or more brands of network security equipment

 Good team player who can also carry out assignments independently

 CCNA, CCNP preferred

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Job Description

1. HR & Admin

• Responsible for payroll, hiring and dismissing activities, performance appraisal, assisting MDs for promotion.
• Supervising Admin team to handle office issues including maintenance, safety, environment, documents, etc

2. Finance

• Supervise finance team to ensure timely and appropriate accounting works for monthly, quarterly, and yearly closing.
• Consolidate business forecast of related business every quarter including those by subsidiaries. (PH, ID, VN, and AE).
• Plan and control yearly departments’ budget (Salary and welfare, Property, Investment and others).

3. Compliance

• Ensure compliance to laws/regulations (Anti-Trust, Anti-Bribery, Export Control and so on) according to the requirement by company policies.
• Manage trainings for enhancing compliance.

4. IT

• Supervise IT team to manage networks, servers, IT devices, computers and so on.
• Manage and ensure SAP operation including FICO, SD, MM, and PP. To liaise with external consultant and support local users and overseas users.

5. Procurement/Others

• Oversee and guide Procurement team to ensure all activities are carried out smoothly and compliance to company policy.
• Oversee Procurement team to ensure activities are carried out to support to sales group, production group and all others group to achieve the benefit of the company objective.

Job Requirements

• Bachelor's degree in Accountancy or ACCA or equivalent professional qualification.
• Minimum 8 years of experience in general accounting and financial reporting.
• Minimum 8 years of experience in manufacturing/engineering industry.
• Experience in corporate compliance management
• Business level of Japanese in order to liaise with Japanese Speaking stakeholders in local and Japan HQ.
• Possess Accounting knowledge and understanding of industry-specific laws.

Serial System Ltd, a SGX mainboard listed Company, is a leading electronic component distributor in Asia Pacific, offering design support, technology solutions and services, materials planning and inventory management. We invite a suitably qualified candidate to fill the following position:

SAP Support Specialist

Responsibilities:

• Understand the design and configuration requirements of SAP modules to meet the business needs of companies
• Provide L1 and L2 SAP support across FICO/ SD/ MM/ BW/AA modules
• Assist Corporate and Regional finance & Operation business owners in process re-engineering
• Follow up incidents which are L3 until completion
• Understand users’ requirements and escalate with the project team for change request initiatives
• Work with Cross-functional SAP team, non-SAP team, finance and business users within the organization
• Record local requirements and communicate closely with Core IT Team to improve our business process and ERP functions
• Participating in various SAP project, enhancement, roll-outs and post go-live support
• Handle SAP user authorization setup and prepare authorization related audit documentation
• Support SAP related business functions
• Guide junior members of the team
• Conduct user training
• Perform ad-hoc duties assigned by the supervisor

Requirements:

• Minimum Diploma in Computer Science, Engineering or equivalent discipline
• 1-2 years of IT support related to SAP Applications
• Experience in FICO implementation, customization, data migration and cutover activities will be advantageous
• Excellent written and communication skills in both English and Mandarin Chinese (To liaise with Chinese speaking associates)

Interested candidates are invited to email their resumes and expected salary.

We regret that only short-listed candidates will be notified.

Why Join us:

Supportive Team Environment: Supports each other & values your success.

Career Growth: Through hands-on training & skill development opportunities.

Work-Life Balance: Find a healthy balance between work and personal life here.

Machinery Mechanic/Technician

Job Description:

• Good job knowledge of marine heavy Equipment Mechanical works, troubleshoot, remove re-installation and repair works (Such as Cranes, motors, generators, and pumps etc.）
• Good job knowledge of Heavy Equipment Electrical work, troubleshoot and repair Equipment Electrical related matters.
• Attend Breakdown
• Provide technical assistance to service operations
• Other ad hoc duties assigned by supervisor/management

Benefits Summary:

• Up $2500 + OT + Bonus + Benefits
• 5 Days work week
• Working Location: West
• MNC with good working environment

Responsibilities:

• Repair, maintenance and troubleshoot EV & heavy commercial vehicles
• Inspect and fix a vehicle’s electrical system
• Perform automotive care tasks like checking fluid levels, rotating tires and changing oil fluids
• Read & understand electrical schematic diagram and use the multimeter & insulation meter to measure voltage, etc
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6593839640

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH

Registration No: R1658602

EA License No: 20C0278

Job Description

To perform inspection by using CMM & other measuring equipments

To ensure parts are according to customer's requirements

Job Requirements

Higher NITEC level in technical engineering or GCE 'O' level

Minimum 1 year related working experiences

Able to operate CMM machine independently is an advantage

Able to commit overtime

Good team player

Independent

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description & Requirements

· To carry out wire rope replacement for port cranes.

· Perform other related duties and responsibility as assigned by superior.

Requirements

· Physically fit.

· Positive working attitude and team work.

Work Location

. PSA Terminals (e.g Brani, Keppel, Pasir Panjang, Tuas)

• $2500 - $3300 + $60 handphone allowance
• Senoko
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in (Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

1. General administration of all building works, security, fire protection system and site staff relating to rostering of duties, discipline, control of performance standards and staff welfare.

2. Lead a team of management and operational staff to provide facility management services.

3. Planning and implementing maintenance programmes, and M & E plant and equipment maintenance programme.

4. Constantly review contract specifications such as those of cleaning, security etc. and make recommendations of upgrading standards.

5. Preparation of estimates for repair works, works specifications, invitations for quotations, recommendations of award, supervision of completed works including drafting of contract documents.

6. Constantly check the entire development to ensure prompt removal of all fire hazards, proper functioning of fire escapes, fire doors and obstruction-free access.

7. Develop and plan training programs for operation staff to ensure their skills and knowledge are kept up with time.

8. Attend to requests and respond to emergencies.

9. To carry out any other duties as and when directed by the Head of Property & Projects and General Manager and/or the Management.

Overview

You will partner the leadership and line managers to provide guidance and solutions in day-to-day people matters and in achieving the long-term goals and objectives of NUHS, Alexandra Hospital and Human Resources.

You will be part of the People Relations team that focuses on building a strong and positive culture, healthy work environment and high performing teams through governing and guiding the employer – employee relationships and other people related matters. This role reports to Manager, People Relations.

Job Responsibilities

You will be responsible for the following:

• Build relationship with stakeholders as a trusted HR partner through professional advice on HR policies and procedures, and employment legislations
• Support the effective, efficient and professional delivery of HR plans, programmes, processes and service through partnership with Centres of Excellence and Group Shared Services
• Guide managers in handling a range of staff matters including performance and disciplinary matters in an objective, fair and transparent manner aligned with the Alexian culture
• Support employees and managers in HR-related enquiries
• Support and facilitate performance reviews, as well as engagement surveys with business leaders.
• Navigate the execution of processes in accordance with policies, obtaining relevant approvals and opinions where required
• Analyse issues raised with consideration of differing perspectives from various stakeholders
• Document information, outcomes and processes, ensuring these are securely stored in accordance with policies and procedures
• Participate in NUHS, MOM, MOH, MOHH, AH, HR projects, events, committees as and when assigned or appointed

Requirements

• Degree in Human Resource Management or equivalent from a recognized university
• At least 5 years in human resource function
• Strong interpersonal, communication and stakeholder management skills to engage staff of all levels
• Resourceful, strong initiative and self-motivated
• Excellent critical thinking and analytical skills
• Sound knowledge of Employment Act and Labour Laws

Note: this is a 2-year contract role with possibility of conversion

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

Our client is a renowned security solution provider that delivers turn-key solutions. They have carved a reputation for themselves and are committed to developing their people through continual career development training.

Education / Experience:

• Diploma / Degree in IT / Computer Engineering or equivalent
• 1 year of experience in IT Support & Monitoring (Will consider Fresh Graduate with a good attitude)

Job Description:

• Supporting deployment of on-site data centre physical infrastructure.
• Installing, replacing and troubleshooting Cables and Hardware.
• Handling data-bearing devices (ex. hard drives, solid-state drives, etc.)
• Working within a ticket-based environment.
• Movement of equipment using pallet jacks or other assisted lifting equipment.
• As required, assisting the Datacentre Inventory and Asset Management Team (DIAT) with
• shipping/receiving and inventory management to address high work volumes.
• Flexibility to work non-standard business hours that may include weekends and/or holidays.

Skill sets:

• Basic knowledge of computer hardware and components.
• Six (6) months or more handling/maintaining any technical equipment or machinery.
• 1+ years’ experience supporting IT equipment or related technology.
• Applicable certifications: CompTIA (A+, Server+, Network+), Basic Structure Cabling (BSC).
• Ability to support frequent standing, walking, lifting, and working at heights with or without
• equipment assistance.
• Able to communicate effectively.
• Proficient in written and oral English communication to support regional and global teams.
• Desire to learn, grow, and develop new technical skills.

Key Responsibilities:

Windows Server Management:

Administer and manage the installation, configuration and maintenance of Windows Server environments (2012 – 2022).

Troubleshoot and resolve issues related to Windows server, networking and hardware.

Ensure all Windows servers are patched and up to date with security updates.

Active Directory (AD) Management:

Configure and maintain Active Directory environments, including user /group management, domain controllers and replication.

Implement and manage Group Policy Objects, Organizational Units and other AD components.

Troubleshoot and resolve issues related to AD replication, trust relationships and user authentications.

Automation and Scripting:

Experience on develop and maintain PowerShell scripts for task automation, configuration management and monitoring is preferred.

Hands-on experience to leverage automation tools like MECM, Altiris for streamlining repetitive tasks.

Security Management:

Implement and maintain security policies, including regular security updates, antivirus software, patch management.

Address audit findings in timely manner

Virtualization & Infrastructure:

Manage virtualized environments (eg: VMware) for efficient resource allocation and utilization.

Oversee storage provisioning and data backup/restore procedures to ensure high availability and disaster recovery.

Monitor server health, capacity and performance and ensure systems operate efficiently.

Disaster Recovery & High Availability:

Manage and execute backup policies to ensure timely and reliable data backups.

Implement disaster recovery plans, including system restoration and failover processes.

Ensure high availability configurations for critical systems, including clustering and load balancing.

Support & Documentation:

Provide escalated technical support for windows server related issues.

Maintain clear, concise documentation for system configurations, procedures, troubleshooting steps.

Key Skills and Experience:

Minimum 8+ Years of experience in Windows Server administration

Expertise in Active directory, Group Policies, and DNS / DHCP management.

Strong experience with virtualization platforms [ VMware]

Proficiency in PowerShell scripting and task automation.

Solid knowledge of networking protocols and security principles.

Experience with backup solutions, disaster recovery, high availability configurations.

Experience in troubleshooting Windows server environments and virtualization platforms.

Qualifications:

Degree/Diploma in Computer Science, Information Technology, or a related field.

Relevant certifications such as MCSE, MCSA, CompTIA, VCP are highly preferred.

Ability to work independently and in a team environment, with strong problem-solving skills and a proactive approach.

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Development Commissioning & Qualification protocols from C&Q Plans
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS experience and DeltaV Batch experience required
• Experience in the Designing, Commissioning & Qualifications of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Reporting to the Chief Human Resource Officer, you will partner leadership and line managers to provide guidance and solutions in day-to-day people matters and in achieving the long-term goals and objectives of NUHS, Alexandra Hospital and Human Resources. You will also be responsible to lead and develop strategies that strengthen employee-employer relationships, foster a strong organizational culture, and create a healthy work environment based on mutual respect, trust, and appreciation

Job Responsibilities

You will be responsible for the following:

Business Support

• Build relationship with stakeholders as a trusted HR partner through thoughtful HR solutions to the business needs. Coach and develop the business leadership team to drive positive changes in people management, and advise on manpower strategies and solutions.
• Provide professional advice on the interpretation of HR policies and procedures, employment legislation, performance management, manpower planning, recruitment and rewards strategies.
• Work with Centre of Excellence and relevant key stakeholders in the delivery of key HR projects and initiatives.
• Drive people engagement, build morale, improve workplace relationships and boost productivity and retention. Performance and Development
• Partner with leaders for identification of successors and talents for business-critical roles and organization's talent profiles.
• Facilitate performance moderation and discussions with leadership. Workplace Relations
• Lead in AH Industrial Relations and Employee Relations matters and develop a positive working relationship with the union.
• Guide senior leaders and HR team members in handling complex performance and disciplinary matters.
• Lead and undertake complex investigations when required, collaborating with legal and other teams as necessary.
• Guide peers and team members in conflict resolutions and grievance handling processes.
• Facilitate negotiation, conflict resolution, and grievance meetings with stakeholders to achieve mutually agreed outcomes.

Requirements

• Bachelor Degree from an established university in Human Resource or Business Management related discipline.
• Minimum 15 years of HR experience.
• Strong collaborative and interpersonal skills to engage staff of all levels.
• Strong leadership capability, people developer.

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

*Only Singapore Citizens and Singapore Permanent Residents may apply.

Job description

The National University Health System Virtual Care Centre (NUHS VCC) is an initiative where trained personnel provides tele-triage to patients and/or their caregivers. VCC will either provide advice and resolve the clinical question or escalate to the VCC clinician where appropriate. To facilitate the development and evaluation of VCC at NUHS a research team has been established. This team is now looking for a research assistant/associate with experience of conducting research projects to join the group. The successful candidate will support research fellow on the evaluation of VCC.

Primary Responsibilities

1. Assist in designing and implementing research-related tasks.
2. Assist in recruiting and coordinating research participants
3. Help with data entry, cleaning, and management
4. Assist in collecting and analysing data from various sources
5. Conduct literature reviews and summarize findings
6. Assist in developing research papers, reports, and presentations
7. Maintain accurate and organized records of research data and findings

Secondary Duties

1. Attend VCC-related meetings
2. Collaborate with the research team to achieve project goals
3. Assume additional responsibilities as assigned by the reporting officer/HOD.

Job Requirements

1. Master and/or Bachelor's degree in a relevant field (e.g. social sciences, psychology, biology)
2. Minimum 2-4 years of experience in hospital research is a plus.
3. Ability to work independently, and communicate effectively in English, both verbally and written.
4. Experience of applying for ethical review would be an advantage
5. Ability to maintain confidentiality and adhere to ethical research standard.
6. Driven and motivated, with potential to achieve research excellence.
7. Ability to generate experimental results leading to high impact publications.
8. Multi-lingual preferable

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

*Only Singapore Citizens and Singapore Permanent Residents may apply.

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

• Oversee the installation, configuration, and upkeep of computer hardware, networks, and systems.
• Provide technical assistance and resolve issues related to hardware, software, network connectivity, and printers for end-users.
• Collaborate with users and IT vendors to deliver IT services and solutions effectively.
• Manage and implement data protection protocols and cybersecurity measures, ensuring robust security configurations and regular maintenance.
• Assist in the acquisition, procurement, and documentation of IT assets.
• Offer support for IT infrastructure, including system setup, software upgrades, and the installation of system patches.
• Configure and manage Microsoft 365 services like Exchange, SharePoint, and OneDrive, including user setup, licensing, and essential functions.
• Apply and maintain Microsoft 365 security policies and tools, such as Entra ID, Intune, Purview, Cloud Defender, and Multi-Factor Authentication (MFA).
• Hands-on experience managing Microsoft Windows environments, providing troubleshooting and email support.
• Perform other tasks as delegated by management.

Job Requirements:

• Min Diploma in Computer Science or relevant Degree qualification in a related discipline
• Strong working experience with Microsoft 365 administration
• 4 years of relevant working experience

Check out Aber Care Website for more details.

Interested applicants please email your detailed resume to [email protected]

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504|

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Development Commissioning & Qualification protocols from C&Q Plans
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS experience and DeltaV Batch experience required
• Experience in the Designing, Commissioning & Qualifications of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.