Information:

Working Hours : 8am~8pm / 8pm~8am (Rotating Shift)

Shift Pattern : Work 4 Days, Rest 3 Days

Meal Allowance and Shift Allowance provided

Responsibilities:

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.
• Report to Manager in Engineering Department

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.
• PPE Requirements : Jumpsuit and Mask in Production Area

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Technician (SecurityLock/Vault doors Products) - Training Provided

• Install, repair, and maintain safes and vaults
• Install mechanical and electronic locking devices etc
• Provide customer service by communicating with clients, understanding their needs, and ensuring their satisfaction with the company services.

Qualifications:

• Have some experiences in installation and repair related area (can be different industries) etc as product & technical training will be provided
• Proficiency with basic hand tools and equipment
• Valid driver’s license as company van will be provided

Location: Near to Potong Pasir MRT/ Geylang Bahru MRT

Salary: $2500 to $3500 + allowance etc

Interested candidates are welcome to email resume to [email protected] and CC to [email protected]

JD:

• Perform Material receiving, staging, material movement, dispensing, sampling, filter inspection, change out and charging operation as per Standard Operating Procedures (SOPs).
• Perform sampling, intermediate and finished goods pack out as per SOPs.
• Perform pre-campaign set up, post campaign activities and change over cleaning.
• Monitor process operation, trend and alarm using Delta V control system.
• Ensure proper communication and handling over of shift duties.
• Responsible for the updating of Manufacturing Standard Work and Operation Standard work.
• Complete all documentation according to GMP and GDP standards.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to the manufacturing process.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Responsible for preparation and cleaning of equipment for maintenance work
• Take immediate action to resolve any near miss situations.
• Report all actual, near misses and potential accidents for further investigation.
• Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently.
• Assist in project commissioning and validation activities as necessary.
• Perform task in assigned process train, which includes day to day operation, equipment & line cleaning and documentation.
• Perform operator care, identify and address equipment training observations that require mitigation action and/or raise work order to get back to desired condition.
• Develop courses of action and drive implementation of solutions

Requirement

• Nitec / Diploma in Chemical Process Technology or relevant field of studies

Interested to find out more:

Please send your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599
Recruit Express Pte Ltd Company Reg. No. 199601303W

Responsibilities

· Enter prescription information including but not limited to: patient searches, prescriber searches, drug selection, prescription interpretation, insurance billing, and basic documentation.

· Dispense medicine when needed

· Accept customer and prescription information required to process new and refill prescriptions, including refill authorization from doctor offices.

· Retrieve medication from inventory.

· Create prescription labels and put them on prescription containers.

· Place medication into prescription containers.

· Complete paperwork related to filling prescriptions and input customer and prescription data into the computer.

· Assist with maintaining the Pharmacy department by keeping it clean and in order.

· Assist in inventory management processes including order review, inventory returns, restocking shelves, and physical inventory preparation.

Requirements

· Min Dip / Deg in Pharmaceutical Science / Pharmaceutical Chemistry / Other relevant certification

· Meticulous and a team player

· Good communication skills

· Knowledge of MS Word, Excel

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Thank You.

Victoria Yam Wen Ting
R21103142
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Job Description

The Network Technician is responsible for installing, amending, and removing unnecessary cablings and other network peripherals. The activities may include but not limited to:

• Install wall-functioning computer networks, connections, and cabling.
• Rack and Dismount Network Device.
• Perform Preventive Maintenance and asset sighting.
• Perform Ocular inspections and regular site visits.
• Ensure tidiness within managed rack and cable organization.
• Perform connectivity test and Physical triage.

Key Responsibilities

• Asset Sighting and Preventive Maintenance
• Working at Height
• L1 physical triage in case of any faults.
• Network device rack dismount and mount peripherals.

Rack Conditions

• Rack Sighting
• Rack Available
• Rack Locked
• Rack Fan Working
• Rack Cleanliness
• Power Cables Secured

Environmental Conditions

• Temperature (Check the location of the temperature and inform the authority or our engineer)
• Other Environmental Factors (Dust, Dirt etc.), if Duty then need to clean the rack or space where device is located.
• Physical Health of Device (Randomly need to check the device health).
• AGV Preventive Maintenance.
• Rack Mount and Dismount (Installation, Removal and Addition)

Labelling

• Labelling Condition (verify labelling of device, if not okay then need to relabel the device.

Qualification and Competencies

• Experienced in Layer 1 Physical administration in enterprise DC and Port Environment.
• Min Diploma or its equivalent (IT related)
• 1 to 2 years experience in hands-on experience with common software and hardware installation and deployment
• Mount and Installation of new network Peripherals
• Test Cable Connectivity
• Working at height
• Incident Handling for L1 Issues
• Good Team Player and also able to work independently
• Proven experience as network technician or relevant position
• Cable Testing
• Basic Network Connectivity Testing
• Rack Mounting
• Preventive Maintenance and Asset Sighting
• Physical Layer troubleshooting
• Fiber Testing
• Driving License Class 3 (Must possess)
• CCNA/CCNA Trained (Optional)

Pre-Requisite

• Able to work during holidays and weekends
• Able to work as standby for any break fix related concerns
• Required to wear PPE (safety garments) during onsite visits including boots
• Willing to attend courses provided (relevant to job scope)
• no issue performing work at height
• No respiratory related illness (i.e. Asthma) due to work nature

Job Responsibilities:

• Perform inspections, maintain instrument calibration, and apply quality techniques (e.g., Six Sigma)
• Audit/review/approve final product assemblies
• Coordinate inspection support for validation and projects
• Create Certificates of Analysis/Conformance

Requirements:

• Minimum ITE/Diploma in Engineering
• Basic CAD drawing knowledge
• Proficiency in Microsoft Office
• At least 1-2 years of relevant experience

Benefits:

• Birthday Leave (for use in the birthday month only)
• Medical Leave/Hospitalisation Leave (as per MOM regulations)
• Comprehensive Medical Benefits (GP, Hospitalisation, Specialist, TCM, Dental)
• Monthly Fruit Day (Week 1 of every month)
• AWS/Performance Bonus (subject to company performance after 1 year of service)

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA License No: 23C1703

Job Responsibilities:

• Perform mechanical assembly operations and handle inventory
• Utilize tools like soldering irons, heat guns, crimpers, and automatic wire strippers
• Support first-time production runs and continuous improvement initiatives
• Meet daily production output and quality requirements

Requirements:

• Minimum GCE “N” Level/“O” Level/Nitec/Higher Nitec/Diploma
• 1-2 years of relevant experience
• Basic knowledge of hand tools and Microsoft Office

Benefits:

• Birthday Leave (for use in the birthday month only)
• Medical Leave/Hospitalisation Leave (as per MOM regulations)
• Comprehensive Medical Benefits (GP, Hospitalisation, Specialist, TCM, Dental)
• Monthly Fruit Day (Week 1 of every month)
• AWS/Performance Bonus (subject to company performance after 1 year of service)

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA License No: 23C1703

1 year contract Aerosol Technician (5 days, office hours) #HAN

Responsibilities

• To execute daily work within the control room:
• control room operation
• routine maintenance of pumps, SM, ventilators
• study set-up (glassware)
• qualification of smoke protocol
• test smoking
• aerosol measurement
• instrument calibration check

• To assist in planning of test substance preparation and conditioning.
• Assist in development of standard operating procedures and work instructions
• To prepare daily report
• To run experiments to study the background of aerosol technical aspects.
• To assist in configuring the control room data acquisition application(s) as needed.
• To organize and conduct the practical aspects of additional measurements such as particle size determination.

Requirements:

• Minimum Diploma/Degree in science related fields
• Minimum 1 year of relevant experience

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Alvin Lee Peck Keong
CEI No.: R1104781
Recruit Express Pte Ltd, EA License No.: 99C4599

Key Responsibilities:

1. Machine Maintenance: Perform routine checks, repairs, and preventive maintenance on machinery to ensure efficient operation and minimize downtime.
2. PLC Programming: Modify and troubleshoot PLC programs (Mitsubishi and Omron) using GX Developer and CX Developer software to optimize machine functionality.
3. Technical Systems Handling: Maintain and troubleshoot pneumatic, hydraulic systems, and associated components effectively.
4. Electrical Expertise: Interpret electrical drawings and ladder diagrams to support maintenance tasks and machine modifications.
5. Production Support: Prioritize repairing and improving production machinery to enhance performance, reduce breakdowns, and improve part quality.
6. Process Optimization: Identify and resolve production bottlenecks to improve efficiency, and recommend corrective measures for machinery improvement.
7. Safety & Compliance: Ensure repairs and modifications adhere to safety standards and participate in developing and reviewing safety protocols.
8. Collaboration: Work with cross-functional teams and supervisors to achieve quality, productivity, and cost-reduction goals.
9. Audit & Documentation: Compile accurate documentation, assist in audit protocol development, and ensure adherence to quality standards (e.g., IATF 16949, ISO14001).
10. Continuous Improvement: Plan and execute improvement projects, coordinate departmental objectives, and maintain a clean, organized, and safe work environment.

Other Information

• At least a tertiary education in Engineering field
• Welcome candidates without experience

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may send their resume to [email protected] or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R1767800

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Maintenance Technician
• Working Location: Senoko
• Working Hours: 5.5 working days (Mon to Fri 8.30 AM – 5 PM, Sat 8.30 AM – 12.30 PM)
• Salary Package: Basic Salary + OT + Rental Allowance + Meal Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform monthly preventive maintenance job as per planned schedule
• Support production machinery with troubleshooting and repair work
• Liaise with external vendors to resolve major machine issues
• Assist superior with new production equipment installation and commissioning
• Comply with food safety and workplace safety and health (WSH) requirements
• Any ad hoc duties as assigned

APPLY NOW!!!

• Minimum NITEC in Engineering or equivalent
• At least 1 year of working experience in the maintenance field of the food industry

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66084 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Requirements:-

- At least 3 years relevant working experience in Facilities Maintenance

- Hands-on experience in Mechanical and/or Electrical, Building Services, ACMV or equivalent.

- Positive attitude, good interpersonal skills

- Communication and reading literacy in the English language is required

Job Descriptions:-

- Perform preventive maintenance and breakdown technical support for

mechanical/electrical services, plumbing & sanitary services, Air-con

servicing and maintenace, ACMV systems, chillers and electrical control

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Assemble & Test Trainee/Assembly & Test Technician
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $2,300 + OT + AWS + VB
• Duration: Permanent

Key Responsibilities

• Acquire skills in assembling, disassembling, testing, and installing products safely and efficiently in the field.
• Ensure proper maintenance and storage of tools and inventories.
• Adhere to established procedures and quality standards in all tasks.
• Maintain accurate records, notably tracking serial numbers for each part and fixture.
• Comply with all safety protocols to maintain a secure working environment.
• Keep the workshop clean and organized.
• Handle additional tasks as assigned.

APPLY NOW!!!

• Minimum 'N' Levels or a National Trade Certificate or equivalent.
• Comfortable working in a warm or factory environment.
• Comfortable with hands-on work and capable of handling physical demanding tasks.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70176 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Senior Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.
• Design, simulate, and implement high-temperature electronic systems, including component selection, qualification, and PCB assembly.
• Conduct functional and qualification testing of designed PCB boards and sub-assemblies.
• Prepare technical reports and presentations to document and communicate results.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Day Technician | Chemical Industry | Up to $2.5k | 5 Days | Jurong Island

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

The Day Technician is responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations.

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

3 Months extendable to 1 Year Contract - 1 Month bonus upon completion of 1 Year Contract

Job Description:

• Perform plan preventive maintenance work (PPM) as assigned by the Supervisor.
• Troubleshoot electrical fault and reinstate the power supply and equipment back to normal operation.
• Troubleshoot air conditioning fault and reinstate the air conditioning back to normal operation.
• Repair water pipe burst, mechanical work, medical gases system and other related facilities equipment.
• Any other duties assigned by the Senior Technician/Engineer.

Requirements:

• Min ITE Diploma
• Able to commit to rotating shifts

For interested candidate, please email your resumes to [email protected]

Denyse Nicole Tan Shuqin (#HDT)

Recruit Express Pte Ltd

CEI No: R1333503

Company EA license : 99C4599

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Benefits & Location

Working location: Ubi Techpark and client sites

Working hours: 8.30am to 6pm (Monday to Friday)

Eligible for Overtime Pay

Please submit your updated resume with your expected salary.

Responsibilities

• Monitoring and basic troubleshooting response.
• Perform routine checks and monitoring of systems according to Standard Operation Procedure (SOP)
• Perform scheduled preventive maintenance works.
• Maintain proper housekeeping of all inventories and equipment.
• Comply to Site safety protocol, work procedures and SOPs
• Repair, service, maintain and test Audio Visual, Lighting and Sound equipment
• Ad-hoc duties as assigned by management

Requirements

• No prior experience required
• Able to work independently after short training
• A proactive attitude and willingness to learn
• Ability to adhere to instructions

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Job Description

• Industry/ Organization Type: IT Communications Service Provider
• Position Title: System Support Engineer (Telecommunication/ PABX)
• Working Location: Central (Nearest MRT: Mattar)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Configuration of Voice/Network peripherals, VoIP/ Cloud PABX, Network Switches etc.
• Provide helpdesk and remote support to customers, as well as onsite technical troubleshooting.
• Validate System Design Documents to ensure alignment with customer requirements.
• Build and maintain strong customer relationships through a proactive approach and positive attitude.
• Continuously acquire and update product knowledge in line with industry trends.

APPLY NOW!!!

• At least ITE with minimum 1 year of related working experience.
• Experience in deploying and managing Voice/Data project, supporting VoIP telecommunication systems, network switches, troubleshooting LAN/VoIP systems is an advantage.
• Good knowledge in IT and communication system/PABX is required
• Alcatel, Mitel and Yeastar PABX knowledge will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71498 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Associate System Engineer / System Engineer (2 years contract renewable)

5 days, 8.30am- 5.50pm

Salary: $2800- $3000 (AE), $3500 (System engineer) + Allowance

Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Industry/ Organization Type: Wholesaler & Manufacturer/ AV Equipment
• Position Title: Project Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead and manage internal teams, including AV Designer, Drafter, Engineer, Site Engineer, and Safety Officer.
• Coordinate with external stakeholders such as Consultants, Main Contractors, Subcontractors, Manufacturers, and Suppliers to ensure successful project delivery.
• Study and analyze schematic designs and construction drawings to create accurate AV construction drawings.
• Oversee project schedules, budgets, and change orders, and manage the Bill of Material (BOM).
• Ensure customer satisfaction by managing their expectations and delivering a positive customer experience.
• Plan, manage, and allocate necessary resources to ensure project timelines and goals are met.
• Other additional tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 2 years of experience in project management for construction sites or A&A works (preferably related to M&E or ELV solutions such as CCTV or structured cabling).
• With Audio Visual technical knowledge or project management experience is a plus.
• Ability to interpret construction drawings.
• Able to work independently in a fast-paced environment.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781