a) Works at the construction site for civil engineering works

b) Identify , liase and to disolve the techinical /construction issues with the project owner /consulatnts, various supplier or sub contractor

c) Preparation of the shop drawings , method statement , SOP of the works

d) To assist for the planing , supervising , monitoring and controlling daily works acvitites /tasks and to improve the works progess

e) To prepare the neccessary reports or related presentation

f) To propose any alternative effective and efficient construction methods or ideas for speed, quality and safe works

g) To ensure construction works are done accordingly and comply to all authorities requirements or standard

h) Ability minimun to master / operating the cad version drawings

i) Able to work indepentantly with great initiative and motivation

Summary

Responsible for designing and implementing test hardware and software to validate product functionality, performance, and reliability. Strong problem-solving, organizational, and communication skills are crucial for success in this role.

Responsibilities

• Design, develop, and implement test hardware and software for validating product functionality, performance, and reliability.
• Create automated test systems and procedures to ensure consistent and repeatable test results.
• Develop, troubleshoot, and maintain test fixtures, equipment, and associated software for in-house and production testing.
• Collaborate with design and manufacturing teams to identify and address test-related issues.
• Analyze test data to identify trends, troubleshoot issues, and recommend improvements to product design or test processes.
• Document test plans, procedures, results, and maintenance requirements.
• Ensure test systems comply with industry standards and safety regulations.
• Continuously improve test processes and tools to reduce testing time and increase reliability.

Requirements

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field from a recognized institution.
• Minimum of 5 years of experience in developing test hardware and software, preferably for complex electromechanical systems.
• Strong proficiency in programming languages such as Python, LabVIEW, MATLAB, or C/C++.
• Knowledge of hardware design and schematic interpretation to develop custom test fixtures.
• Experience with data acquisition systems, signal processing, and instrumentation.
• Familiarity with communication protocols (e.g., I2C, SPI, UART, Ethernet) and interfaces (e.g., GPIB, USB).
• Ability to integrate sensors, actuators, and control systems into test setups.
• Experience in using software tools for simulation, debugging, and automation.
• Ability to analyze complex technical problems and develop innovative solutions.
• Strong troubleshooting skills for both hardware and software in testing environments.

Main Duties:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• 
  
• To be involved in the planning and designing of civil and structural engineering works
• To prepare the design and technical specifications for tenders; as well as tender documents for the bidding of civil and structural engineering projects
• To supervise in the civil and structural works
• To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients
• Any ad-hoc duties as per assigned

1) At least two years working experience

2) Able to use engineering software Staad pro, SAFE, Plaxis

3) Able to work independently under the guidance of senior / principle engineer

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

The Site Engineer (Civil) is responsible for assisting the PM on the progress of site works and manpower related aspects of the project. He/She will be required to:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Workheads/Foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical diculties.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

Job Description

Assisting Project Engineer with daily site activities.

Formulation of procedures for construction activities.

Attendance and contribution for prestart, internal, HSE and client meetings.

Requirements

Atleast 2 - 3 years of working experience in construction field

Degree in Civil Engineering or its equivalent

We are seeking an experienced Middleware Engineer to join our team. The successful candidate will be responsible for administering, supporting, and maintaining middleware products, including but not limited to IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, and IBM WebSphere MQ (WMQ). This role requires a strong technical background, excellent problem-solving skills, and the ability to work both independently and collaboratively in a dynamic environment.

Key Responsibilities:

• Administer, support, and maintain middleware products (IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, IBM WMQ).
• Install, configure, and maintain JBOSS EAP, IBM WebSphere Application Server (WAS), Oracle WebLogic, and IBM WebSphere MQ (WMQ).
• Assess system needs, identify appropriate changes, and make recommendations for improvements.
• Perform middleware system administration tasks, including troubleshooting, monitoring, problem resolution, system security, and change implementation.
• Plan, prepare, and apply maintenance fixes and upgrades for JBOSS EAP, WMQ/WAS, and other middleware platforms.
• Assist with high-level debugging, including heap and thread dump analysis, to support application teams.
• Provide detailed documentation for middleware installations, configurations, and administrative processes.
• Work individually or as part of a team on system projects related to UNIX, Linux, Windows, and application support.
• Provide on-call support for middleware systems as required.

Experience Required:

• 6+ years of experience managing middleware platforms, including IBM WebSphere Message Queuing, Application Server, JBOSS EAP, and Oracle WebLogic.
• Strong UNIX/Linux operating system administration experience.
• Deployment and administration of JBOSS EAP in enterprise environments.
• Experience deploying clustered, highly available middleware platforms.
• Familiarity with database integration is a plus.
• Experience with scripting languages to automate tasks is an advantage.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

COTS Engineer

Responsibilities:

• Assist Business Analysts (BA) in the elaboration of user stories.
• Collaborate with Quality Assurance (QA) to develop test automation scripts and address bug fixes.
• Support DevOps in the automation of build and release processes.
• Design and deliver functional software applications that exceed customer expectations.
• Enhance software quality by employing XP (Extreme Programming) practices such as code review and unit testing.
• Adhere to the Software Craftsmanship Manifesto.
• Prepare architectural and other technical documents.

Experience and Skills Needed:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.
• Familiarity with Git.
• Experience with Continuous Integration.
• Experience in working with agile teams, including Test-Driven Development (TDD), Pair programming, and Scrum.
• Proficiency with both Windows and UNIX/Linux servers.
• Knowledge of Design Patterns.
• Familiarity with Unit Testing.
• Strong presentation and listening skills.
• Exposure to mobile application development is a plus.
• Working experience in Agile and UX development environments is advantageous.
• Proficiency with business process modeling techniques and BPMN (Business Process Model and Notation) is a plus.
• Experience in the development of internet and intranet applications is beneficial.
• Hands-on configuration experience in administering and managing COTS (Commercial Off-The-Shelf) products and features, including but not limited to rules engine, workflow, process logic, data validations, screen flows, and page layouts with products like Salesforce, ServiceNow, Sharepoint Online, Dynamics 365, etc., is advantageous.
• Experience with designing custom objects, fields, functions, layouts, processes, or validation rules is an asset.

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Job Description

• Responsible for Equipment Uptime, Productivity

• Work in a cleanroom environment for long hours

• In-charge of PM planning, Equipment Maintenan

Management.

• Co-work with Engineer to resolve equipment/line

• To improve and enhance machine performance a

machine capability.

• Perform any other duties as assigned.

Job Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Elect

Mechanical), or equivalent.

• Proficiency in Microsoft Office.

• Ability to work independently as well as in a team

• Shift work required.

• At least 2 years of relevant working experience inenvironment.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: West
• Salary: Basic up to $3,600 + Allowance $100 + AWS + VB

Job Description:

• Oversee, manage, and coordinate project activities alongside a team of Engineers and Technicians to ensure successful project completion.
• Track and manage project progress to meet timelines, stay within budget, and maintain quality standards.
• Collaborate closely with consultants and clients to ensure project requirements are met.
• Conduct system programming and troubleshooting during the project implementation phase.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

We require experienced Electrical engineer that is able to

-work on board a tourist cruise boat along Singapore River

-troubleshoot and rectify electrical problems

-work independently

-familiar with AC and DC conversion

-charging of boats using shore chargers

-general works (Painting and Cleaning)

-

Job Responsibilities:

a) Assist and support the Project Management team in project execution:

• Prepare shopdrawing and design calculation report such as cable sizing and etc

• Liaise with client on technical requirements

• Liaise with consultant or authority for the approval of design

• Provide technical support and advice on design and engineering to the project team

• Assist project team with technical advice to installation team

b) Assist and support the Business Development team in tender or proposal submissions:

• Conduct site survey and prepare feasibility study report

• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc

• Prepare tender documents for submission

• Prepare costing for commercial proposal

c) Familiar with Authority requirement and IEC standard or equivalent for renewable system installation

d) Maintain and update renewable system components list

e) Assist in the development and upgrade of engineering tools

f) Provide support for team members in other regions

g) Liaising with new and existing vendors/suppliers for price lists and up-to-date product and service information with the procurement team

h) Liaise with other teams to gather feedback on design and costing for continuous improvement

i) Ad hoc task assigned by the reporting officer

Job Requirements:

• Minimum Diploma/Degree in Engineering field (Electrical engineering background would be an advantage)
• At least 2 years of working experience in renewable industry
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectively
• Familiar with Autocad, PVSyst and Sketchup
• Quick learner, goal-oriented team player with strong communication and troubleshooting skills

The applicant must be:

• A Marine Engineer whose working experience will include Failure Modes and Effects Analysis for DP Equipment Class 2 and 3 vessels as a team member and independently witnessing DP FMEA Proving Trials and Annual DP Trials in the capacity of third-party surveyor.
• Familiar with IMCA DP related guidelines and with the requirements of Oil Majors, including ASOG development and implementation.
• Familiar and experienced with inspections of vessels working in the oil, gas, and renewable energy sectors.
• Willing to take on new roles such as superintendency and project management of vessel maintenance, repairs, and dry dockings.
• Willing to travel overseas and offshore when required.
• Analytical, able to work independently, results orientated, resourceful and pro-active.
• Able to independently develop competency and practice continuous professional development.

Qualification

• Degree in Electrical Engineering, Marine Engineering or equivalent.
• IMCA Accredited DP Practitioner.
• IMCA eCMID Accredited Vessel Inspector.

Experience Required

The Projects Engineering will have at least two years’ experience working with vessel Dynamic Positioning Systems (DP) as a consultant or independent verifier.

As an equal opportunities’ employer, we offer a competitive remuneration and generous benefits package, commensurate with qualifications and experience.

If you are keen to take up this rewarding opportunity and challenge, please send in your CV [email protected].

www.m3marine.com.sg

-Provide engineering expertise and technical assistance for installation, maintencance, troubleshooting and repairs of automatic and electrical device, loct, etc.

-Conduct scheduled, preventive and ad-hoc maintencance at customers' premises

-Attend emergency site issue and respone to sited within time frame

-Manage, prepare and maintain proper reports and records for maintenance

-Assist in other business activities as and when assigned

Requirement

-Candidate must possess at least Diploma / Advanced / higher / Graduate Diploma, Bachelor's Degree / Post Graduate Diploma / Professional Degree in Engineering (Electrical / Electronic) or equivalent.

-At least 3 Years of working experience in the related construction field is required for this position

-Preferably Junior Executive Specialized in Engineering - Electrical or equivalent

Reporting to the Flow Manager, he/she will be responsible for driving and meeting product reliability and improving product yield.

Job description

- Prepare and submit concessions to OEMs for out-of-scope repairs.

- Liaise with OEMs on technical queries or any other matters as

required.

- Provide technical support and leadership to the shop floor, as well

as to various sections requiring engineering inputs.

- Support shop floor on modification of existing fixtures and

designing of new ones.

- Ensure that all matters pertaining to product or process are

managed efficiently.

- Ensure that all the technical problems are resolved in a timely

manner, hence enabling smooth operation and production

- Liaise with Marketing & Customer Service Department to ensure

that all technical requirements set out by the customers are met.

- Carry out feasibility studies for new capability setup as well as

initiate and carry out the set up.

- Set up new specification capability on existing special processes.

- Review special processes requirement for new product part

number / CMM.

- Set up new Equipment / Machine or modify existing set up for

increase in capacity.

- Conduct investigation and issue warranty reports

Perform process nonconformance gap analysis.

Create and maintain necessary shop documentation to ensure compliance with CMM & other specification revision:

- Overhaul Routers

- Lot Sheets

- ICR

- Bushing Installation Sheets

- OHRW Assembly/ Dis Assembly Worksheets

- OHRW Process Sheets

- Plating Data Sheets

- Plating Masking Data Sheets

- NDT technique sheets

- Procedures

- Forms

Candidate skills & requirements

- Knowledge of MS Words, Excel & PowerPoint

- Project Management

- Special process knowledge

- Robotics programming is a plus

- CAD experience is a plus

Job Description

• Monitor systems performance and usage, including response times.
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting.
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security.
• Provide technical advice to the team and clients on installation, setup, configuration of systems.
• Implement plans to make systems available to users in a shared, secure and controlled manner.
• Identify any complex system issues to provide advisory to the stakeholders.
• Install, configure, and maintain server operating systems (Windows/Linux/VMWare).
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup.
• Develop automated processes to define, measure, and report on service quality, stability and capacity.

Requirements

• At least 3 years’ experience in developing, implementing and maintaining IT systems.
• Systematic in approach and familiar with enterprise level trouble shooting.
• Bachelor's Degree/Diploma in Computer Science, Engineering or equivalent.

EA Licence No: 11C5502 | EAP Registration No: R21100522

Job Description :

1. Need to take Bar Bending Schedule from rebar structural drawings.

2. Need to Take the exact rebar quantities from the provided drawings.

3. Submission of Cost control reports for total rebars received & total rebars used & wastages.

4. Able to test and use the communication devices.

Job Requirements :

1. Experience in Bar Bending Schedule.

2. Diploma or above relevant qualifications.

3. Previous Singapore work experience will be an added advantage

Good knowledge and hands on experience working with software and hardware systems in the area of:

• IP CCTV System

• Perimeter Protection System (PPS)

• Physical Security Information Management System (PSIM)

• Video Management System (VMS)

• Audiovisual System

 Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system.

 Work closely with team members to meet client’s service delivery level agreement

 Able to work and coordinates with contractors and clients

 Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance

 Understands technical documentation, installation manuals, system drawings etc.

 Able to read and orientate construction drawing, floor plan, etc.

 Continuously looking to improve processes as well as introduce new technologies for better security and greater customer satisfaction

 Proficient in electrical power and good knowledge on power cabling works for on-site works

 Understands technical documentation, manuals, as-built system drawings etc.

 Works independently without supervision and communicates well with team members, partners, and clients

 Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement

 Carries out any other technical related duties that may be required

 With knowledge on construction site safety and regulatory requirements

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Work Location Mostly outdoors on different sites across Singapore

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus