As ANCS (Automation, Navigation & Control Systems), we transform how vessels perform to create the safest and most efficient journey for our customers – always with the vision in mind to navigate towards a more sustainable maritime industry. With our rich history of pioneering maritime technologies, we have defined industry benchmarks.

To be better tomorrow, we need the right talents today to complement our strong team of 650 employees in over 10 countries across the globe with the right skills, experience, and a winning attitude.

Nacos Marine Singapore is looking for Technical Support Manager to join our team.

This is a permanent opportunity, located at Jurong East, Singapore.

In this position, your work will focus on these responsibilities:

• Located in Singapore to cover Asia’s Customers issues (AUT & NAV) in ANCS
• Provide remote diagnosis of problems and definition of further steps to be taken to further isolate or remedy the problem, with appropriate communication to the customer and, if necessary, to other departments, where troubleshooting requires it
• Attend Field Service activities in Asian countries
• Perform root cause analysis of technical problems at ship and equipment level
• Independent clarification of complex service problems of the entire product range including preparation of a detailed solution proposal in cooperation with the product management
• Findings for special problem cases, if it is necessary, carry out of the required on-board repair, on board attendances for installation/commissioning/services
• Preparing for meetings Technical topics and analysis for order and service management
• Present Life Cycle Management meetings with customers
• Attend site survey and health check of customer installation on site
• Special tasks: participation on call on duty, surveys, trainer activities etc.
• Deep understanding of NACOS related automation system
• Training of team members in the Asia region.

To be successful in this role, we expect you to have:

• Diploma in Engineering and above
• Minimum of 20 years work experiences in similar position
• Experienced in PCS, MCS and PLC related platform for automation system
• Coding requirements : IEC and SLS coding
• Strong in Automation Technical Skill
• Experienced with independent hands-on personnel on ANCS products and Automation
• Good interpersonal skills with ability to work both independently and as part of a team

Please note that according to Wärtsilä policy, voluntary consent for a background check is required for candidates being considered for this position.

Why you and us?

We at Wärtsilä ANCS believe in empowerment, ownership and taking responsibility of our work. We support each other’s growth and cocreation is the true basis of our innovation. We have courage to see opportunities and take initiative.

We are authentic and honest, and we strongly believe in that by being your own true self you can accomplish so much more. We don’t always get it right the first time, and if mistakes are made, we make sure to learn and grow from them. We want everyone to voice their opinions freely. That is why we have built an environment that empowers you and everyone around you, and where you can feel safe and cared for. Are you eager to be part of this ambition?

We have an amazing team, and we are excited about our work and the impact it has on building sustainable societies. We are looking to find a colleague with this shared passion for smart technologies and a sustainable future.

Key Responsibilities

• Accountable for end-to-end delivery of CEW from pre-project to post go live support
• Providing technical leadership and guidance to team
• Partnering with business stakeholders, architects to understand business requirements and technical design
• Plan, manage, track delivery through a combination of agile tools and traditional planning tools where required to ensure overall delivery across all streams are sequenced and tracked
• Ensure risks are pro-actively managed and highlighted in right forums to seek support for resolution
• Deliver project in guidance and adherence to Bank’s software delivery, security, release management standard & guidelines.
• Ensure all deliverables, checkpoints are planned and delivered to meet the bank’s standards and quality gates
• Pro-active planning on development dependencies and plan and track them to closure
• Ensure quality standards are built into the development phase with a quality first approach
• Measure and monitor progress and quality using data-oriented approach
• Participate in scrum of scrums and cross stream meetings to discuss, highlight dependencies across systems.
• Conduct regular checkpoints (daily scrum, weekly project meetings) and track actions to closure
• Put in change management processes to manage and deliver agreed business outcomes
• During test phases, actively drive defect fixes to meet SLA’s. measure and manage defect density, re-open rates
• Promote a culture of inclusiveness and have active participation from the team during team meetings and standups.
• identify areas of improvement from each sprint and work towards continuous improvement to improve sprint velocity and quality
• Leading and contributing to cross-team improvement initiatives relating to agile methods, CI/CD tools, people, architecture, project management and governance, including further adoption and improvements to the Bank’s System Development Methodology (SDM)

Key Requirements

• At least 10 yrs experience with a track record of successfully delivering complex projects
• Should have had at least 5 years of experience in managing large scale projects & building applications from scratch using API’s and micro services and leading multiple streams
• Strong project / program management skills
• Should have prior experience in managing virtual teams in onsite/offshore model
• Should have a development background and the right level of experience and expertise to coach and design, plan and deliver complex applications
• Ability to work under pressure and strict deadlines
• Own overall delivery and drive team’s velocity
• Strong analytical and communication skills
• Go-getter
• Prior experience in Banking applications (customer facing – client onboarding or middleware payment processing systems) is a plus

Roles and Responsibilities

• Analyse and define detailed functional specification based on the functional and non-functional requirements document
• Collaborate with Functional Business Analyst and Business Unit to clarify with functional and non-functional requirement
• Work closely with architecture team to define project target state and specification
• Collaborate with business and IT to analyse, elicit and review business requirements
• Participate and contribute to technical solutioning and architecture reviews with architecture team
• Define functional and non-functional requirements and perform impact analysis assessment with the vendor
• Perform detailed estimation of projects and change requests
• Facilitate communication between vendor, project team, business stakeholders and internal IT team
• Conduct FDS review / Write and review user stories with Functional Business Analyst and Business Unit for signoff
• Review interface design specifications created by development team
• Review test strategy and functional test cases created by testing team
• Support project and delivery team all throughout the project implementation
• Monitoring and manage risks /issues related to requirements and scope creep

Skills

• Bachelor’s Degree in related disciplines or equivalent experience
• 8 to 12 years of relevant Business Analysis experience related to Pre-Payments, Core-Payments processing and Post Payment processing, eg, Local, Interbank(G3, DuitNow, FPS, PromptPay, PayNow, BI Fast) &, Cross Border Payments (Swift, other payment providers like Bank of New York)
• Relevant experience in Banking / Finance / IT; good knowledge in financial services policies, procedures, products and industry practices.
• Good knowledge in channel products for wholesale banking focusing user experience/journey, validation and processing will also be preferred
• Advantageous to have hands-on experience to configure Payment product/systems from vendors like FIS, etc
• Good Open API knowledge for design and delivery
• Excellent communication and inter-personal skills to manage functional and technical stakeholders across multiple business units.
• Able to work independently with minimum supervision
• Ability to work in a fast-paced, team-oriented environment
• Strong problem solving and analytical skills
• Proven results-oriented person with main focus on delivery
• Good understanding and experience in standard Software Development Life Cycle (SDLC) and Agile development methodology.

Roles and Responsibilities

• Analyse and define detailed functional specification based on the functional and non-functional requirements document
• Collaborate with Functional Business Analyst and Business Unit to clarify with functional and non-functional requirement
• Work closely with architecture team to define project target state and specification
• Collaborate with business and IT to analyse, elicit and review business requirements
• Participate and contribute to technical solutioning and architecture reviews with architecture team
• Define functional and non-functional requirements and perform impact analysis assessment with the vendor
• Perform detailed estimation of projects and change requests
• Facilitate communication between vendor, project team, business stakeholders and internal IT team
• Conduct FDS review / Write and review user stories with Functional Business Analyst and Business Unit for signoff
• Review interface design specifications created by development team
• Review test strategy and functional test cases created by testing team
• Support project and delivery team all throughout the project implementation
• Monitoring and manage risks /issues related to requirements and scope creep

Skills

• Bachelor’s Degree in related disciplines or equivalent experience
• 8 to 12 years of relevant Business Analysis experience related to Pre-Payments, Core-Payments processing and Post Payment processing, eg, Local, Interbank(G3, DuitNow, FPS, PromptPay, PayNow, BI Fast) &, Cross Border Payments (Swift, other payment providers like Bank of New York)
• Relevant experience in Banking / Finance / IT; good knowledge in financial services policies, procedures, products and industry practices.
• Good knowledge in channel products for wholesale banking focusing user experience/journey, validation and processing will also be preferred
• Advantageous to have hands-on experience to configure Payment product/systems from vendors like FIS, etc
• Good Open API knowledge for design and delivery
• Excellent communication and inter-personal skills to manage functional and technical stakeholders across multiple business units.
• Able to work independently with minimum supervision
• Ability to work in a fast-paced, team-oriented environment
• Strong problem solving and analytical skills
• Proven results-oriented person with main focus on delivery
• Good understanding and experience in standard Software Development Life Cycle (SDLC) and Agile development methodology.
• Strong negotiation skills.

Project Location: River Valley Road area

Job Description:

• Assist the Resident Engineer and Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Resident Engineer and/or Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records and issue site memos for non-compliance.
• Estimated commencement of work in February 2025.

Requirements:

• Diploma/Degree in Mechanical or Electrical Engineering from a recognised tertiary institution.
• A registered Resident Technical Officer with IES / ACES is preferred.
• Minimum 5 years’ experience as a Resident Technical Officer on local projects.
• Experience in supervision of Mechanical Services installation for residential, hotel or retail would be added advantage.
• Familiar with local codes and regulations.
• Excellent interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Project location: Bukit Merah

Job Description:

• Assist the Job Manager to attend to technical and design issues at site and report issues to Job Manager.
• Provide standing supervision as and when directed by the Resident Engineer and/or Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in February/March 2025

Requirements:

• Diploma/Degree in Mechanical or Electrical Engineering from a recognised tertiary institution.
• A registered Resident Technical Officer with IES / ACES is an added advantage.
• Minimum 5 years’ experience as a Resident Technical Officer on local projects.
• Experience in Plumbing and Sanitary projects will be added advantage
• Experience in supervision of Mechanical Services installation for local Hospital/Healthcare/Commercial Developments would be added advantage
• Familiar with local codes and regulations
• Ability to respond to technical questions

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking a People Manager to guide and mentor a team of technical professionals, fostering a collaborative and high-performance work environment.

Responsibilities

•Provide technical leadership for our cybersecurity product capabilities development and sustenance.

•Technology Subject Matter Expert who understands security landscape and solution credibly with ability to work with cross-functional team including solution architecting, pre- and post-sales engagements, project management to deliver cybersecurity product solutions.

•Set strategic direction in alignment with business objectives, keeping abreast of industry best practices.

Requirements

1. At least 10 years of software development experience of which at least 5 years are in a technical leadership role in cybersecurity

2. Relevant Industry Certifications such as CISSP, CSSLP, PMP or equivalent

3. Technical knowledge in following is a must:

i. Cloud Architecture: Planning and implementing the applications & data to the cloud and ensure organization’s technical and business requirements are met.

ii. Networking Knowledge: Demonstrate expertise in networking concepts, protocols, and technologies, with the ability to design and implement complex network infrastructures.

iii. DevOps: Drive the adoption of DevOps practices within the organization, including continuous integration, automated testing, and continuous delivery.

iv. Software Version Control: Implement and manage software version control systems to track changes, facilitate collaboration, and ensure code quality.

4. Previous experience working on government projects specifically in cybersecurity environment and governance, risk management and compliance is an added advantage.

5. Effective communication and presentation skills with ability to transpose complex security concepts into business terms/impacts.

6. Experience with deployment orchestration, automation and security configuration management

7. Ability to work easily with diverse and dynamic teams

Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

As a member of the QA team, you will support the team in the implementation of the Company Wide Quality Strategy to exceed customer expectations for product quality, logistics and cost. You are responsible to support A & One’s best-in-class quality assurance and controls management systems. You are required to deliver on all required key performance indicators and drive continuous improvement across all quality functions to achieve operational excellence.

1. Manage the entire customer lifecycle, serving as customers key account managers from the first touchpoint to on-time delivery.

2. Provide technical support in sales presentations, briefings, product demonstrations.

3. Participate in monthly sales team reviews to update on the learnings and challenges.

4. Conduct pre-sales and/or post-sales technical consulting activities.

5. Coordinate client needs with various internal resources and teams.

6. Stay up to date on technology news, including trends, product roadmaps, market conditions, etc.

7. Achieve sales objectives and identify business opportunities.

8. Develop relationships with new prospects by leveraging personal and business networks.

9. Responsible for answering sales inquiries from both local and international sales markets.

10. Lead technical discussions in client meetings across multiple levels and disciplines to identify business and technical needs, issues and priorities.

11. Present project status internally and leads communication between the project team and its stakeholders.

12. Target the right clients, grow quality pipeline, win profitable deals and manage sales activities with the objective of creating mutually beneficial, trust-based relationships that create value.

13. Manage sales campaigns for top opportunities in the precision engineering domain and will be responsible for day-to-day campaign management, with emphasis on opportunity qualification, win strategy definition/execution, proposal development, orals presentation, and support of contract negotiations.

14. Act as point of contact for resolution and escalation of all key items with the client and internally.

15. Provide solutions to complex business problems for area(s) of responsibility where analysis of situations requires an in-depth knowledge of organizational objectives.

16. Collaborate with operations department and other cross-functional teams to ensure on-time delivery and zero defects to achieve 100% customer satisfaction

Requirements

Education

· Min Diploma/Degree in Mechanical, Electrical, Electronics, or Chemical Engineering

Mandatory Experience

· 3 to 5 years of quality management experience in precision engineering, contract manufacturing of complex semiconductor equipment, or wafer fab environment.

· Proficiency and knowledge in CMM Programming, measurement and calibration equipment

· Knowledge of quality systems

· Knowledge and Experience in Surface Treatment

· Experience in writing non-conformance and corrective actions reports (e.g. 8D, F23, NCR) for customers

· Experience in the processes and report writing for New Product Introduction (NPI), Prototype and First Article (FA)

· Enjoys solving complex challenges with exceptional internal and cross departmental team communication and management experience

· Proficiency in both English and Chinese to write, communicate and translate amongst non-English speaking team members

Good to Have

· Experience in using Microsoft Enterprise Resource Planning System Navision

· Basic understanding of precision engineering product drawings, blueprints and treatment specifications.

Team Summary

Client Services provides industry-leading operational support to Visa’s clients around the world. With our deep knowledge and expertise, we bring the voice of the customer into the design, development and successful deployment of Visa products and services. We are trusted partners to Visa’s clients, providing expertise to support and successfully grow their business.

The Implementation Services team is responsible for delivering end-to-end client implementations for products, solutions, infrastructure, and new client onboarding.

What an Analyst, Implementation Services does at Visa:

The Implementation Services team is a talented team of professional services organization responsible for overall technical program management and implementations, with a focus on implementation services provided to Clients, including but not limited to, enabling a broad range of products and solutions, supporting complex processing modifications, and general tactical initiatives for Visa clients across the Asia Pacific (AP) region.

This position serves as Visa Project Manager for implementation services provided to Clients, including but not limited to, enabling a broad range of products and solutions, supporting complex processing modifications, and general tactical initiatives for Visa clients across the AP (Asia Pacific) region.

This is an individual contributor responsible for solving complex problems, serving to gather and document project requirements while providing client consultative guidance on Visa regulations, fees, features, and functionality.

In this role, you are expected to:

• Lead and execute high quality project management support to Visa clients and processors to ensure client expectations are met in line with agreed timelines
• Coordinate directly with clients to analyze and understand card program setup/endpoint requirements to implement Visa products and services and facilitate endpoint connectivity to support the business and formulate implementation solutions
• Confidently manage client projects in parallel to product developments and a changing landscape
• Build and enhance positive working relationships with key Visa client institutions, processors, and internal stakeholders
• Be able to communicate complex, technical concepts in a focused and well-organized manner
• Be able to learn and acquire knowledge in modern technologies in keeping step with market developments
• Good analytical skills, not just for problem analysis, but to use technical acumen for reviewing appropriateness of technical or project documents and in integrating systems solutions
• Prepare and maintain detailed project plans, risk/mitigation plans, status reports, and issues logs to enhance internal and external communications
• Represent client system and operational requirements to internal Visa organizations
• Be an active contributor in a high-performing, supportive, and inclusive team culture
• Constantly create good functional collaboration with internal and external stakeholders, by being able to speak confidently with a professional demeanor
• Be accountable for delivering agreed objectives. Be responsible for own workflow assignments and must be able to take the initiative to resolve problems and ensure delivery on commitments, leveraging your immediate manager for guidance and direction where needed
• Coordinate internal Visa resources to ensure delivery on commitments

Why this is important to Visa:

The role works across a breadth of internal and external stakeholders to achieve the stated project objectives. If required, this role escalates projects that are in jeopardy and works with line management within Visa and the Client organization to make decisions that bring needed resources to resolve any issues. The role serves as a technical/functional specialist and works independently with guidance only in the most complex situations.

At Dow, we believe in putting people first and we’re passionate about delivering integrity, respect and safety to our customers, our employees and the planet.

Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We’re a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you’re looking for a challenge and meaningful role, you’re in the right place.

Summary

This TS&D specialist will play a key technical role in supporting the growth of the business under Packaging and Specialty Plastics of the Dow Chemical Company in different countries of SEA. The role is to be part of Dow’s cutting-edge technology development and resolve current and future scientific difficulties in material science.

Key responsibilities

1. Provide technical solutions

• Focus on client-side application development and technical support.
• Propose solutions to resolve internal and external technical issues related to the Packaging and Specialty Plastics business.
• Identify gaps of existing products and technology, help develop new products by working closely with R&D experts.

2. Interface with Customers

• Cultivate and maintain customer intimacy by interacting with customers on a regular basis. Work closely with sales counterparts to develop and solidify relationships with customers.
• Responsibilities include: visit customers, provide technical consultation and troubleshooting advice, coordinate test samples and results, documentation, technical presentation and lab results analysis.

Experience qualifications

• Master’s degree or above who graduate in 2024 or 2025, Major in Polymer Science and Engineering, Material Science, Chemistry, Chemical Engineering or other relevant disciplines.
• Proven track record of customer issue resolving and technical troubleshooting.
• Fundamental understanding in the general area of polymer science and engineering, e.g. polymer chemistry, polymer physics, polymer processing and rheology, polymer characterization etc.
• Research Experience on plastic film or sheet formulation, process and application in packaging materials will be preferred.
• This role requires good English reading, writing and speaking. Chinese and Bahasa capability is a plus.

Soft skills qualifications

• Self motivated, proactive and confident. Possesses customer-oriented mentality. Can-do attitude.
• Can drive a project from beginning to the end under proposed time frame. Can set timeline and prioritize multiple projects.
• Strong interpersonal skills. Work comfortably in a team setting. Able to motivate and positively influence team members.
• Good writing and presentation skills.
• Travel about 30% of work time.

Dow will assist candidate to apply Singapore Work Pass if required but result subjects to Singapore MoM's review.

Job Description & Requirements:

• Ensure correctness of build-up according to construction plans and drawing.

• Assist to prepare tender documents including project plan, construction, construction schedule plan and quality assurance measurement based on technical standard.

• Prepare technical support documents such as construction technical proposal for bidding

project.

• Coordinate with engineering team to prepare engineering drawings and sketches for further operation.

• Coordinate with consultant and client and prepare presentation documents for bidding projects.

• Involved in detailed site investigation, terrain, landform, underground and other conditions as generate various technical design example drainage, power and communication supply.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

• Participate in management and implementation of design and various technical data, responsible for compilation of construction operation instructions and technology summary and report to Managers.

• Prepare detailed monthly and weekly progress plans to project team according to monthly/annually progress targets as assigned.

• Communicate with government personnel/owner/developer to coordinate existing site issue as necessary.

• Ensures timely, safe, and cost-effective design and implementation throughout the project lifecycle from conception to client satisfaction.

• Maintain, drive, supervise and implement robust technical standards, systems and processes

• Prepare detailed bill of quantities, and carry out accurate accounting of various quantities to ensure that the quotation conforms to the design drawings and specifications

• Influence technology strategies and decisions with a high-level of expertise and knowledge

• Provide direction and support to ensure compliance with relevant legislative specifications and standards

• Lead a team of workes developing, and address training needs when necessary

• Coordinate the regular testing of to address faults, and provide evaluations to improve

• Act as a key contact with customers who have technical issues

• Write and prepare several construction technical plans as for backup

• Compile schedule plan and personnel mechanical allocation table as report for managers

• Management of all site engineers on using machine at work for coordination matters

• Fluent in drainage systems, design and installation of drainage systems to manage stormwater and prevent flooding

• Supervising work for the safety and the efficiency of production on technical progress at site

• Able to advice and propose based on - Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Job Requirements:

• Degree in Civil Engineering.

• Minimum 10 year(s) of working experience in the construction projects

• At least 5 years in bridge construction project

• Experience with Marine or Shipyard Project will be an advantage

• Ability to clearly particulate expectations

• Ability in quality control and checking

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and drawings based on requirement and quotation.

• Able to provide advices on altering design changes to suit site condition.

• Comprehensive problem-solving abilities.

• Knowledge on Underwater Construction Site exp: Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Job Description & Requirements:

• Ensure correctness of build-up according to construction plans and drawing.

• Assist to prepare tender documents including project plan, construction, construction schedule plan and quality assurance measurement based on technical standard.

• Prepare technical support documents such as construction technical proposal for bidding

project.

• Coordinate with engineering team to prepare engineering drawings and sketches for further operation.

• Coordinate with consultant and client and prepare presentation documents for bidding projects.

• Involved in detailed site investigation, terrain, landform, underground and other conditions as generate various technical design example drainage, power and communication supply.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

• Participate in management and implementation of design and various technical data, responsible for compilation of construction operation instructions and technology summary and report to Managers.

• Prepare detailed monthly and weekly progress plans to project team according to monthly/annually progress targets as assigned.

• Communicate with government personnel/owner/developer to coordinate existing site issue as necessary.

• Ensures timely, safe, and cost-effective design and implementation throughout the project lifecycle from conception to client satisfaction.

• Maintain, drive, supervise and implement robust technical standards, systems and processes

• Prepare detailed bill of quantities, and carry out accurate accounting of various quantities to ensure that the quotation conforms to the design drawings and specifications

• Influence technology strategies and decisions with a high-level of expertise and knowledge

• Provide direction and support to ensure compliance with relevant legislative specifications and standards

• Lead a team of workes developing, and address training needs when necessary

• Coordinate the regular testing of to address faults, and provide evaluations to improve

• Act as a key contact with customers who have technical issues

• Write and prepare several construction technical plans as for backup

• Compile schedule plan and personnel mechanical allocation table as report for managers

• Management of all site engineers on using machine at work for coordination matters

• Fluent in drainage systems, design and installation of drainage systems to manage stormwater and prevent flooding

• Supervising work for the safety and the efficiency of production on technical progress at site

• Able to advice and propose based on - Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Job Requirements:

• Degree in Civil Engineering.

• Minimum 10 year(s) of working experience in the construction projects

• At least 5 years in bridge construction project

• Experience with Marine or Shipyard Project will be an advantage

• Ability to clearly particulate expectations

• Ability in quality control and checking

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and drawings based on requirement and quotation.

• Able to provide advices on altering design changes to suit site condition.

• Comprehensive problem-solving abilities.

• Knowledge on Underwater Construction Site exp: Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Mandatories are:

• Experience in Business Analysis. 8-10 years
• Experience in Digital Channels and in transaction banking. 5 years+
• Understanding of Technology but no need to have coding experience
• Capturing, analyzing and eliciting business Requirements: Elaborating JIRA stories
• Agile product development experience

Nice to haves are:

• Detailed Knowledge in how Payments work in Singapore vs Malaysia vs Hong Kong (regulatory too)
• Knowledge of Technology trends e.g. how does a digital bank approach digital channel?
• API /SWIFT experience

Personal Qualities:

• Articulate well. Clarity in analyzing and writing business requirements
• Not an order taker, able to push back complex build needs and offer alternate solutions

• A great team player. Collaborate and communicate well with the other BAs
• Strong analytical and problem-solving skills
• Strong presentation and meeting skills
• Proactive and has initiative to thrive in a fast-paced environment to deliver and meet deadlines
• Highly resourceful and self-motivated

No deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

This role ensures that all raw materials meet established quality standards and regulatory requirements to support manufacturing processes. The ideal candidate will have strong attention to detail, experience in analytical testing, and knowledge of pharmaceutical QC practices.

Key Responsibilities:

· Conduct Testing and Analysis: Perform qualitative and quantitative testing on raw materials following standard operating procedures (SOPs), Good Laboratory Practices (GLP), and Good Manufacturing Practices (GMP).

· Sample Preparation: Prepare samples of raw materials for analysis using appropriate techniques and equipment, such as HPLC, GC, FTIR, UV-Vis spectroscopy, and wet chemistry methods.

· Documentation and Reporting: Accurately document test results and observations, maintain detailed laboratory records, and prepare reports in compliance with regulatory standards.

· Compliance and Safety: Adhere to all quality and safety standards within the laboratory, ensuring all work is conducted according to regulatory guidelines (FDA, EMA) and company policies.

· Instrument Calibration and Maintenance: Ensure that laboratory equipment is properly calibrated and maintained; troubleshoot issues and coordinate with the maintenance team as needed.

· Inventory Management: Monitor raw material inventory levels, including reagents and supplies, and coordinate with the purchasing team to replenish stocks.

· Continuous Improvement: Participate in continuous improvement initiatives to enhance lab efficiency, accuracy, and safety, and identify potential areas for process optimization.

· Collaboration and Communication: Work closely with cross-functional teams, including production, QA, and R&D, to ensure timely support and resolution of QC issues.

Qualifications:

· Education: Diploma or Bachelor’s degree in Chemistry, Biochemistry, Pharmaceutical Sciences, or a related field.

· Experience: 1–3 years of experience in a QC laboratory within the pharmaceutical or biotech industry, with a focus on raw materials (experience with GMP and GLP preferred).

· Technical Skills: Proficiency in analytical testing techniques, especially HPLC, GC, FTIR, and wet chemistry methods. Familiarity with Laboratory Information Management Systems (LIMS) is a plus.

· Attention to Detail: Strong attention to detail and accuracy in testing, documentation, and reporting.

· Regulatory Knowledge: Understanding of industry regulations and standards, including FDA, ICH, and USP guidelines for raw materials.

Work Environment:

· Ability to work in a laboratory setting, which may involve exposure to chemicals and use of protective equipment.

· May require occasional lifting of equipment or samples (up to 25 lbs).

Primary Objective(s) of Position

• Design, implement, and maintain the company's software applications to ensure that code is properly built, tested, and deployed.
• Support backend users for internally developed and external application system/tools.
• Act as the liaison between the department and end users to deliver high quality solutions.

Duties & Responsibilities

• Provide software development and enhancement using C#, and Microsoft Visual Basic for Application (VBA) for internally developed systems.
• Provide and support the analysis and maintenance of the Company's SAP system's (S/4 HANA) functional areas such as Material Management (MM), Sales and Distribution (SD), Transportation Module (TM), Finance and Controlling (FI/CO) modules.
• Participate in other system development, implement and improvement initiatives when assigned

Skills & Experience

• A Degree in Information Technology or equivalent
• Experience in software development, Microsoft SQL Server
• Prior experience in S/4 HANA and SAP Fiori will be a plus
• Meticulous with an eye for details
• Team player with the ability to present, good interpersonal and communication skills

Systems analysts are computer software experts who assess the current state of a company's systems and work to implement new ones to improve performance and efficiency. If you're interested in information technology (IT) and working with software, learning about the typical responsibilities of a systems analyst can help you determine if the role is right for you. Understanding which industries hire these analysts and what skills they have can also aid you in preparing for career success.

JOB REQUIREMENTS:

• Reviewing current IT systems, such as network, software and hardware features for any errors or issues

• Collaborating with employees and department heads to determine which system requirements they need to remain efficient

• Building new systems that address and fix any issues shown in the current systems

• Creating analysis reports that represent the cost-benefit of any proposed upgrades

• Assisting the IT team in implementing any new system that was recently drawn up and approved

• Testing and troubleshooting any recently implemented plans to ensure they're operating efficiently

• Instructing other employees on how to use these new systems through training programs and documents

• Submitting and implementing all systems under strict deadlines and budget restrictions

Job Description: Data Analyst

As a Data Analyst at D-SIMLAB Technologies, you will play a key role in deriving insights from large datasets to optimize semiconductor manufacturing processes. This role focuses on data extraction, analysis, and actionable insights, while collaborating with cross-functional teams to develop and deploy D-SIMLAB’s software products as well as provide professional consultation services to our clients. The ideal candidate is someone who excels in data-driven analysis and is eager to work on high-impact projects in the semiconductor industry.

Key Responsibilities:

• Data Extraction and Analysis:
  Collect, clean, and analyze large datasets from semiconductor manufacturing environments to ensure data consistency, completeness, and correctness.
  Use statistical methods and data mining techniques to identify patterns, trends, and anomalies that impact production performance.
• Performance Evaluation:
  Analyze the gap between planned and actual production outcomes. Identify root causes for performance deviations and recommend data-driven strategies for process improvement. Develop reports and visualizations to present findings to clients and internal stakeholders.
• Data-Driven Insights:
  Provide actionable insights based on data analysis to optimize semiconductor manufacturing processes. Work closely with clients to understand their specific needs and translate data findings into operational and strategic improvements.
• ETL and Data Modeling:
  Build and maintain ETL processes to integrate data from various sources into D-SIMLAB’s data models. Collaborate with simulation modeling teams to ensure accurate and reliable data is fed into models.
• Consultation Services:
  Act as a trusted advisor to clients by offering data-driven recommendations for enhancing their production efficiency. Present analyses and proposals to both technical and non-technical stakeholders, ensuring clarity and actionable takeaways.
• Data Visualization and Reporting:
  Create dashboards and reports using advanced data visualization tools to communicate key insights and trends effectively. Continuously improve reporting mechanisms to provide real-time insights and support ongoing optimization efforts.
• Collaboration with Teams:
  Work with Software Engineers, Data Scientists, and other cross-functional teams to ensure that data insights align with product goals and customer needs. Contribute to product enhancement initiatives, focusing on the improvement of data-related components and analytics.

Candidate Requirements:

• Education:
  Bachelor’s/Master’s degree in Data Science, Computer Science, Industrial Engineering, or a related field.
• Experience:
  Strong analytical skills with a minimum of 2 years of experience in data analysis, preferably in an industrial environment. Semiconductor experience is a plus.
• Technical Skills:
  Proficiency in SQL and Microsoft Excel.
  Experience with data visualization tools (e.g., Power BI, Tableau) is highly desirable.
  Experience with ETL processes and database management.
• Analytical Abilities:
  Strong problem-solving skills and the ability to handle large datasets and deliver actionable insights to improve operational performance.
• Soft Skills:
  Ability to work collaboratively in a multicultural, multidisciplinary team.
  Excellent communication and presentation skills, with the ability to convey complex data insights to non-technical stakeholders.
• Willingness to Travel:
  Willing to travel for international projects and collaborate closely with clients and internal teams.

Job Description

Main Tasks:

• Conducting sales data collection and analysis
• Quoting and managing product pricing
• Supporting the sales team with business enquiries and administrative matters
• Analyzing data and drawing meaningful insights to improve sales and processes
• Conduct projects with different stakeholders to support and drive sales
• Assisting in preparation of presentation slides and other SAP-related sales support activities
• Creating analytics reports for KPI reporting (Monthly Customer Reports, Quality Reports)

May also include:

• Planning and hosting of marketing events
• Collaborating with 3rd party agencies for social media campaigns
• Designing and archiving marketing materials
• Coordinating with 3rd party vendors for various tasks
• Supporting functions of regional teams for problem solving
• Other administrative tasks on ad-hoc basis

Job Description

• Support on Customer Relationship Management (CRM) tools
• Assist the ASEAN sales team with ongoing analytical, administrative and operational tasks
• Manage sales reports, sales dashboards and sales process to make data access extraction more efficient
• Involve in various projects with different stakeholders to support and drive sales
• Support Preferred partner program and channel strategies
• Market research when required
• Assist in preparation of presentation slides and other ad-hoc sales activities
• Assist in other ad-hoc analytics and marketing project and tasks

About Sunningdale

Sunningdale Tech Ltd is a leading manufacturer of precision plastic components. The Group provides one-stop, turnkey plastic solutions, with capabilities ranging from product & mould designs, mould fabrication, injection moulding, complementary finishings, through to the precision assembly of complete products.

Boasting a total factory space of more than 4 million sq feet, with more than 1,000 injection moulding machines and a tooling capacity of 2,000 moulds per year, Sunningdale Tech is focusing on serving four key business segments – Automotive/Aerospace, Consumer/IT, Healthcare and Tooling.

With manufacturing facilities across Singapore, Malaysia (Johor, Penang), China (Tianjin, Shanghai, Suzhou, Zhongshan, Guangzhou, and Chuzhou), Latvia (Riga), Mexico (Guadalajara), North America (Phoenix), India (Chennai), Thailand (Rayong), and Indonesia (Batam), Sunningdale Tech is strategically positioned to target and capture opportunities in diverse business sectors globally.

As an industry leader with deep engineering expertise and experience, Sunningdale Tech is driven to solve your challenges by applying our advanced capabilities & leading technology in ways that benefit you. We’re ready to provide solutions at every step of the process to reduce lead time and add value for customers, while maintaining our excellent quality. Beyond that, we build on our strong foundations to think out of the box and apply relevant new possibilities for your complex engineering problems. Customers can trust us to constantly solve challenges to meet their needs, and apply new ideas for better outcomes.

Responsibilities:

• Oversee daily operation of respective production requirements such as line productivity, efficiency quality yield and machine utilisation
• Maintain process control and carry out routine check verification and repair work
• Carry out periodic and preventive maintenance programs on both hardware and system software
• Maintain records of maintenance programs including plant equipment such as air compressor vacuum pump transformer and etc
• Assist Engineer in maintaining list of spare parts through timely reviewing to ensure minimum disruption to the production operation
• Ensure production operation meets the company’s quality policy and objectives and comply with customer requirements
• Assist Process Engineer in executing continuous improvement plan to attain cost reduction program for customer and to meet company’s goals
• Assist Production Supervisor in initiating action to prevent occurrence of product non-conformity
  Assist and execute the implementation of product non-conformity solution
• Raise safety awareness in assembly area
• Promote and cultivate good housekeeping behaviors in assembly area
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• NITEC or Diploma in Mechanical Engineering or equivalent
• No Experience required. Training provided
• Willing to work 12 hours rotating shift

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Only shortlisted candidates will be notified

Sunningdale Tech is an equal opportunity employer – we believe that a diverse and inclusive workforce will cultivate a vibrant, productive and innovative workplace where all employees are truly respected and valued.

All qualified applicants shall be considered for employment regardless of age, race, gender, gender identity, religion, marital status, medical condition, mental or physical disability, national origin, political and/or third party affiliation or veteran status. All offers of employment shall be conditioned upon successful completion of background checks, valid work passes and medical screenings, as applicable and/or mandated by law, and subject to the applicable local laws and regulations.

Hiring Now: Resident Technical Officer (RTO) – Repainting Project

Are you detail-oriented with a strong technical background in building projects? We’re looking for a skilled Resident Technical Officer (RTO) to join our team and oversee on-site activities for a major repainting project. As an RTO, you will play a key role in ensuring our project meets the highest standards for quality, safety, and compliance.

What You’ll Do:

1. Supervise daily repainting activities to ensure adherence to project specifications, timelines, and safety standards.
2. Conduct quality inspections on surface preparation, paint application, and finishes.
3. Enforce safety regulations and create a safe work environment for all site personnel.
4. Maintain thorough records, submit daily activity reports, and collaborate with contractors and project managers.
5. Identify and resolve on-site technical or logistical issues promptly.
6. Requirements:
7. Diploma or degree in Civil Engineering, Building, or related field.
8. At least 3 years of site supervision experience, ideally in repainting or building maintenance projects.
9. Certified RTO with recognized local authority credentials (optional).
10. Strong skills in quality control, safety management, and regulatory compliance.
11. Excellent communication and problem-solving abilities.

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working Hours

• Mon - Fri, 5 days work week
• 8.30 - 18.00

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Roles & Responsibilities

· Coordinate with principals, sales, project team and clients to produce valued engineering design & construction documents.

· Strong knowledge of building/Façade systems

· Plan concept design by studying construction specifications and material details.

· Prepare 2D & 3D Detail Drawings with Autocad.

· Well organize design drawing sets.

· Obtain approvals from clients with concept drawings.

· Preparation of Shop, Construction and As-built drawings.

· Maintains technical knowledge by attending design workshops.

· Contributes to team effort by accomplishing related results as needed.

Requirements

· Degree in Engineering related to Construction sector.

· Well versed with Autodesk Autocad software.

· Good verbal, written and graphic communication skills.

· Able to communicate well in English.

· Self-motivated and enjoys contributing to highly collaborative teams

· Possess initiative & good working attitude

· Flexible and well-rounded to accommodate shifting schedules, project demands, multiple time zones, and deadlines.

Kindly indicate the following information in your CV

· Current / Last Drawn Salary (in SGD)

· Expected Salary (in SGD)

· Availability

· Residency Status in Singapore

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a QC Expert you will be responsible for the supervision of all testing techniques and scheduling of testing with coordinating with the other departments delivering samples to ensure timely delivery of results. This role is also required to supervise the review of laboratory data (both internal and external) and the closeout of deviations.

Responsibilities

• Supervising the review of laboratory data (both internal and external) and the closeout of deviations
• Author and review Change Controls, Deviations/Investigation as well as Test Methods, Specifications and SOPs
• Perform report writing (Example: Deviations/Investigations/Trending)
• Maintains knowledge of new technologies
• Strong ability to manage multiple priorities and lead projects.
• Customer and regulatory agency interaction as required
• Problem solving of analytical/ microbiological methods as well as troubleshooting of equipment as applicable.
• Manage/perform equipment qualification and validation maintenance review
• Lead/ execute method transfers and validation/ qualification.
• Lead or participate in initiatives aimed at continuously improving quality processes and outcomes e.g. Lean Six Sigma methodologies, cost-cutting solutions, idea-box, etc
• Collect and analyze data related to quality metrics e.g. using statistical tools to identify trends, patterns, and potential areas for improvement
• Participate in Risk Assessment
• SME in 1 or more areas as aligned with training plan and known as go to person for technical advice.
• Able to make decision on the area of expertise
• Coach and train junior team member
• Participate and support in audit
• Any other duties as assigned by your manager

Experience:

• Bachelor’s or Diploma in a relevant science field or equivalent.
• Minimum of 10 years of experience in GMP (Good Manufacturing Practice) Quality.
• Relevant work experience, preferably in a laboratory setting, within the biotech or medical field.
• Individual contributor, high level understanding of QC activities and lab function

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.