• You will be responsible for the overall management and technical operations of our fleet. This includes overseeing the daily operations of maintenance and repair, budgeting, survey schedules, on-board general assessment of vessels, inspections and docking, etc.
• Ensure the assigned vessels are technically operational or otherwise managed accordingly to the management agreement requirement
• Liaise with customers on technical and operational matters including vessel performance, etc.
• Attend to vessel dry docking, repairs and survey when requires and determine repair specifications for dry docking and maintenance.
• Provide and compile documented reports upon completion of dry docking, including summaries of work performed, operational budgets and actual expenditures.
• Identify and source for technical and operational supplies required for the vessels and ensure the rates are most economical.
• Ensure that all copies of statutory, solas and equipment certificates (life raft, compasses, etc) are properly maintained and documented
• Provide technical assistance and advice to ships both at home port and overseas.
• Perform evaluation for dry docking, repair quotes and selection of shipyards for repair works, ship maintenance etc.
• Perform monthly review of logs processes and attend to vessel inspections
• Monitor technical status of vessel with relation to class cert and survey
• Supervise contractors’ repair/maintenance of vessels
• Perform budgeting and cost control measures on ship spares and docking requirements
• Perform technical compliance audits and investigation on defects/failures on a regular scheduled basis to ensure conformance
• Work closely with the HSE Management team to ensure smooth and successful implementation of QHSE system and policies for the Division
• Perform systematic review of recommended codes, guidelines and standards and ensure compliance with Quality & Safety Management standards
• Ensure and maintain vessels’ zero loss time accident record and to report all vessel incidents, near Misses to prevent and eliminate potential incidents.
• Undertake any other Technical related assignments as and when required.

Requirements:

• Min Diploma in Mechanical Engineering with at min 5-8 yrs relevant experience in similar position
• Possess relevant sea-going work experience as Chief Engineer/Marine Engineer with minimum class 2 certification or equivalent with in experience in AHTS, Offshore Supply/Offshore tug/ Dive Support vessels. Those with DP vessel experience will be highly advantageous.
• Possess good organisational and communication skills and hands-on.
• Independent and resourceful. Able to work under pressure to meet deadline
• Analytical and highly proactive in technical trouble shooting and problem solving
• Familiarity with ISM / ISPS is a must
• Able to conduct effective stand-up training for vessel crews
• Ability to travel within short notice as required

Job Description

• To assist the Architectural Associate/ Architect in his/her duties
• Preparing planning applications and other regulatory application procedures;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Assisting in the detailed design process and co-ordinating design information;
• Preparing/updating tender documentation and construction drawings;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Attending site visits and recording minutes/discussions
• Assisting project architect in coordinating site issues
• Producing and analysing detailed specifications for suitable materials or processes to be used in construction;

Job Requirements

• Relevant Degree in Architecture
• At least 2 years of relevant working experience
• Proficient in Vray renderer, 3D max, Adobe Photoshop and Sketch-up
• Must have Knowledge with 3D Autocad, Revit & BIM
• Relish working in a challenging and fast-paced environment
• Possess a flair for creativity and a keen eye for detail
• A proactive and conscientious team player
• Advantageous to have design experience in commercial, mixed-use and residential projects

Job Description & Requirements

• Candidate must possess at least Diploma in Mechanical and/or Electrical Engineering recognised by the Professional Engineers Board (PEB) and have relevant working experience in the field.
• Candidate shall be accredited with the Joint Accreditation Committee (JAC) of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore. Those who do not have it but have extensive local experience may be considered.
• At least 5 Year(s) of working experience in the relevant engineering in the supervision of construction of mechanical and electrical works.
• Fully conversant with Building Control Act and Regulations & MOM regulations on building works. Able to systematically maintain site records, contract documents and meet reporting requirements under Building Control Act.
• Ability to administer contracts professionally and manage site team is essential.
• Ability to monitor progress and ensure that work done and materials used are in accordance with approved specifications, codes, standards and regulations, and to work with the Project Team, QP, and contractors to rectify any non-conformance.
• Extensive experience in pipe jacking works is a must.
• Contract duration : 18 months
• Work location: Bt Batok Road
• Project type: Construction of service reservoir and pipeline works
• No OT payment but time off will be given
• Able to commence work within short notice

Job Responsibilities:

• Provide technical expertise support to customers and internal team members
• Responsible on in-house application, customer application and development support
• Involves providing direct technical support to customers at their location.
• Conduct training sessions for customers / internal employees on how to use and maintain the products or services the company provides.
• Provide support to the engineering and quality assurance teams within the organization

Job Requirement:

• Bachelor’s Degree in Material/Mechanical Engineering or equivalent practical experience, Master’s degree will have an advantage
• At least 5 years of experiences in Semiconductor
• Good knowledge of wire bonding operations and concept
• Wire bonding hands-on experience is needed
• Possesses with good presentation skill, DOE skills are essential
• Minimum supervision and should have good communication skill with customers
• Willing to travel to oversea for customer on-site support

Job Description

The job involves the supervision of large civil and infrastructure projects such as the Cross Island Line and supervision of production for precast elements for super structures in HDB projects.

We have openings for the position of Resident Technical Officer, RTO, for both Station and Bored Tunnel Works.

For RTO Tunnel, the candidate shall have minimum eight (8) years of relevant experiencein projects similar in nature to the Works in the Civil Contracts. For RTO Station, a minimum of 3 years of relevant experience in supervision deep excavation/basement works.

Shift Works are required.

MRT Project experience will be an advantage.

All RTO shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

The RTO (Tunnel) shall also be accredited as Resident

Technical Officer (RTO) (Tunnel) under IES/ACES

Specialist Accreditation Programme

• Company: Manufacturing Industry (Scanning Device)
• Location: Central
• AWS + Variable Bonus + Allowances
• WFH 2 days per week

Job Description:

Our client, a leading manufacture in Scanning devices, has started looking a Technical Support Engineer for ASEAN and South Asia Region.

1. Post-sales support : Providing Technical support to partners or customers after purchasing their products.

• Assist technical team of partners and customers to tackle and resolve technical issues
• Able to dissemble and assemble scanner according to maintenance manual(Training will be provided)
• Train and enable service partners to provide post-sales support to end-user
• Manage and process of warranty claims, demo/standby unit loan, spare part cannibalization, with system and paperwork
• Installation and configuration of hardware and software products

2. Pre-sales Support: Support Activities as Technical Expertise

• Assist sales team, partners or customers to win and deliver deals
• Demonstration of hardware and software product
• Assist in integration of own products with third party solution
• Provide training and enable partners on pre-sales technical capabilities

3. Oversea travel will be required

• Average 1 trip per quarter. Mainly to ASEAN, South Asia Countries, or Japan

Job Requirements:

• Prefer candidates from similar industry and with similar experience
• At least 3 years of the same/similar experience is required
• Experience of Electronic industry is also welcome to apply
• Slight experience in programming will be great advantage
• Initiative, independent, and harmonious person

Interested applicants please apply directly for further shortlisting review.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Jeffrey Koh Kok Ann

EA Registration No: R1770345

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246

EA License No:90C4069

We are hiring for our project in singapore Technofunctional consultant in SAP.

Providing implementation/ maintenence/support to SAP modules

Qualification:

2-3 full implementation experience of SAP in any of the following modules:

- FI CO

- BI/BW

- SD and plant maintenence

- HCM

- QM

Candidates must have 5 years of SAP consulting background.

• Oversee the installation, configuration, and upkeep of computer hardware, networks, and systems.
• Provide technical assistance and resolve issues related to hardware, software, network connectivity, and printers for end-users.
• Collaborate with users and IT vendors to deliver IT services and solutions effectively.
• Manage and implement data protection protocols and cybersecurity measures, ensuring robust security configurations and regular maintenance.
• Assist in the acquisition, procurement, and documentation of IT assets.
• Offer support for IT infrastructure, including system setup, software upgrades, and the installation of system patches.
• Configure and manage Microsoft 365 services like Exchange, SharePoint, and OneDrive, including user setup, licensing, and essential functions.
• Apply and maintain Microsoft 365 security policies and tools, such as Entra ID, Intune, Purview, Cloud Defender, and Multi-Factor Authentication (MFA).
• Hands-on experience managing Microsoft Windows environments, providing troubleshooting and email support.
• Perform other tasks as delegated by management.

Job Requirements:

• Min Diploma in Computer Science or relevant Degree qualification in a related discipline
• Strong working experience with Microsoft 365 administration
• 4 years of relevant working experience

Check out Aber Care Website for more details.

Interested applicants please email your detailed resume to [email protected]

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504|

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

Project Description

A leading bank of Singapore is continuing on its Mx.3 migration journey and incorporating Bank's report development requirement to cover various user streams such as Front Office, Back Office, Market Risk, Finance and credit risk related end user or interfaces reports.

Responsibilities:

Murex Application Responsibility:
- Understand the Murex system setup at the client, organisation of the support teams, end of day procedures and the report delivery process
- Collect and provide detailed technical specifications / business requirement specifications
- Participates in peer review of requirements, technical and/or testing documentation and assists mentors junior members with same
- Analyse datamart setup and the table structures for the purpose of identifying redundant objects, to minimise execution time of batches, and to seek possibility of reuse of objects
- Segregate reports by users, products, creation classes, fields needed, complexity and frequency of execution
- Develop a generic datamodel and then create datamart objects as required for the reports
- Execute processing scripts and batches manually or through the use of a scheduling tool like Control-M
- Reconcile report extraction output with the onscreen / mreport output
- Analyse differences caused by adding or removing some filter conditions / dynamic table flags / launcher flags
- Create and suggest processes, templates and tools to streamline the development, testing and implementation phases
- Analyses issues during planning and test execution phases
- Provide relevant and accurate information about defects and help the business reproduce errors
- Prepare and send effective periodic and timely status reports
- Track the testing progress and escalate the issue well in advance
- Assists in the preparation and execution of test plans
- Identifies the conditions that create errors to occur and escalates outstanding issues for clarification and resolution
- Escalates identified issues/risks in a timely fashion to the team lead.
- Assist team lead with effort estimation related to the development and UAT
- Ensures test documentation and deliverables are consistent with defined standards
- Coordinate with development and infrastructure team for availability of Mx environments and database
- Create and maintain report delivery plan with relevant traceability
- Have excellent communication skills, both written and oral

Requirements

- At least 5+ years of experience on MX3.1 Datamart
- Understanding of the Murex system as a whole
- Good understanding of capital market products
- In-depth understanding of MX reporting architecture, MX datamodel, and MX Datamart configuration
- Familiarity with mxres configuration files, and launcher flags
- Thorough knowledge of Datamart objects - dynamic tables, feeders, batch of feeders, scanner templates etc.
- Exposed to Mreports; Mreport to Datamart migration experience is desirable
- Experience with Simulation and Risk Matrices
- Experience with Market risk and credit risk report development
- Experience with RDBMS, e.g. Oracle, Sybase
- Excellent SQL programming skills
- Unix experience necessary; shell programming experience highly desirable; awk, sed, and Perl scripting experience would be a bonus
- Experience with at least one reporting tool, preferably Actuate eRD Pro
- Other programming experience a plus, esp MS Excel VBA
Product knowledge (Any one or more, FX mandatory) - FX, IRD, FI, EQD, CRD
Technical skills - Very good knowledge of SQL (Sybase and Oracle), Atleast one reporting tool (Actuate, Crystal reports, Micro Strategy), Basic unix commands

Understanding of Trade Life Cycle
Should possess an understanding of financial markets
Basic knowledge on financial instruments such as Interest Rate Derivatives, Credit Derivatives, Currency Derivatives, Swaps, Futures, Options, FRA, etc.

Job Description & Requirements

Job Requirement

1. The RTO shall be accredited by the Institute of Engineers Singapore (IES) or the Association of Consulting Engineers Singapore (ACES).

2. The RTO shall possess relevant work experience in the supervision of LTA Roads, Viaducts/Bridge, Bus Depot, A&A works, and CAG/PUB.

3. Working Location: CAG, PUB, and LTA Projects, Singapore.

Job Description

1. The RTO Shall supervise all civil, structural including structural elements for Bridge / Viaducts, Roads, and specialist engineering works for compliance with the LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

2. The RTO shall be independent and energetic to perform permanent shift work and project management work.

3. The RTO shall be competent with all necessary Ministry of Manpower WS requirements e.g. Work-At- Height (WAH), Lifting work, Permit-To-Work (PTW), etc.

4. Proficiency in MS Excel, Powerpoint, and maintaining of proper daily work progress record.

Kindly submit the updated CV along with a copy of the RTO Certificate, BCSS

Responsibilities

.1 Accountable to Fleet Manager.

.2 As a Fleet Member, he shall assist FM in implementing Fleet Management System. He shall with his best endeavour to advise FM in relation to performance of the assigned vessels.

.3 Ensure that the vessels under his supervision have on board all the required valid statutory, class and other trading certificates.

.4 Ensure that the vessels under his supervision are manned according to Safe Manning Certificate and that all crew have valid documents required by STCW and flag state.

.5 In co-ordination with the Master and the Chief Engineer, to prepare a PLANNED MAINTENANCE PROGRAMME for submission to the GM at the beginning of the year for the LONG TERM STRATEGIC MAINTENANCE PLANNING.

.6 Monitor the maintenance routines of the vessels under his supervision and ensure that maintenance, inspections and testing are carried out as planned and are not left overdue.

.7 Carefully scrutinise all SPARES AND STORES REQUISITIONS from the vessel before approval for quotations and ordering.

.8 Ensure that the vessel submits technical and other reports in a timely manner.

.9 Review all technical reports submitted and take actions for any non-conformance or below par performance.

.10 Review the vessel's performance in terms of speed, fuel and lub oil consumption and take corrective actions in time.

.11 Study the fuel oil and lube oil analysis reports and advice the vessel of the action to be taken.

.12 To review the budget v/s actual performance of the ships under his care and take corrective measures by way of controlling expenditure, and if the situation demands, submit a proposal for the revision of the budget and approach the management with the appropriate data.

.13 To prepare and submit a quarterly report for customers on the vessels under his care and should cover at least the following:

a) Vessel’s Routing

b) Vessel's Condition

c) Survey and Certificates Status

d) Crew and Personnel Matters

e) Off-hires, if any

f) Accounts (Budget vs. Actual)

g) Class Status Report

h) Photos

.16 Preparation of dry-docking specifications, making a comparative chart of quotations received from various yards and obtaining the Management or Owner's approval.

.17 Visit the vessels at appropriate intervals as per approved ship visit plan and inspect them as per the procedures laid down.

.18 Carry out any additional work assigned by the FM.

.19 Apart from their technical responsibilities, a Technical Superintendent is required to ensure that he is familiar with all the commercial aspects and other commercial related details of his vessels, such as:

a. Relevant clauses of Charter Party such as speed and consumptions, cargo exclusion and others;

b. Contents of Charterer’s voyage instructions such as tendering NOR, clausing B/Ls and Mate’s Receipts, cargo holds cleanliness, Stevedore’s damage reporting and others;

c. Reporting requirements from Charterer or Sub-Charterer;

d. Arranging pre-loading surveys for certain cargoes;

e. Lodging sea protests;

f. Handling protests from shippers, receivers and Charterers;

g. Lodging insurance claims, collecting evidence and following up until closure;

h. Pre-arrival reports required by various port states such as eNOA/D, ballast watr exchange reporting and others;

Authorities

.1 Move to Fleet Manager

.2 Review and Approve spares and stores for any given requisition as per OPM 9, purchasing and supplies procedures..

.3 Recommend the promotions or repatriations of crewmembers on his assigned-vessel.

.4 Sanction spares and stores for the vessels under his care.

.5 Approval of bills for spares, stores and repairs.

.6 Approval of the DRYDOCKING bills after due clearance from the MD

.7 Approval of orders for emergency stores and provisions for the vessels.

.8 Appraise shipboard senior staff & feedback to the Fleet Manager.

.9 Other roles and responsibilities delegated by Fleet Manager.

As an advisory and consultation expert, the role involves providing comprehensive technical guidance on GenAI feasibility and implementation strategies. The position requires delivering expert consultation on best practices for SAP GenAI model training and fine-tuning, also offering strategic advice on security measures, compliance requirements, and governance frameworks.

A critical aspect of this position involves leading pre-sales activities and client engagements. This includes crafting technical proposals, conducting solution demonstrations, and articulating the value proposition of SAP GenAI solutions to potential clients.

The candidate should possess at least 12 - 15 years of SAP technical experience, including a minimum of 4 - 6 years of hands-on SAP BTP expertise. They must have a deep understanding of SAP's GenAI strategy and Joule capabilities, backed by substantial experience in cloud-native development and microservices architecture. Proficiency in API design and REST-based architectures is essential, along with machine learning and AI concepts. A comprehensive understanding of large language models and their practical applications is crucial for this position.

The successful candidate should have a demonstrated track record of implementing SAP BTP solutions, including specific experience with GenAI implementations or proofs of concept (POC). Their background should encompass solution architecture and technical leadership roles, with a history of successfully delivering enterprise-scale SAP implementations. Additionally, they should possess strong mentoring capabilities and experience in leading technical teams, ensuring knowledge transfer and team development across the organization.

Technical Leadership & Architecture

• Design and architect enterprise-scale solutions leveraging SAP BTP, focusing on GenAI integration
• Lead the technical implementation of SAP's Joule and other GenAI capabilities within the BTP landscape
• Develop solution architecture documents incorporating GenAI components, including integration patterns and data flows
• Provide technical governance and best practices for GenAI implementations
• Guide development teams on SAP BTP service utilization and GenAI implementation patterns

GenAI Expertise

• Drive solutions using SAP's Generative AI capabilities, including Joule integration
• Design conversational AI solutions using SAP BTP services
• Implement intelligent document processing solutions using GenAI capabilities
• Develop custom GenAI solutions using SAP BTP AI Foundation
• Optimize large language model implementations within SAP ecosystem

BTP Core Competencies

• Deep understanding of BTP architecture and services
• Experience with BTP security and authentication mechanisms
• Proficiency in cloud integration patterns and API management
• Knowledge of BTP monitoring, logging, and operational aspects
• Expertise in BTP development tools and frameworks

As a Technical Writer you will be responsible for creating and maintaining high-quality documentation for both functional and technical aspects of application/ platforms. You will work closely with solution architects, development leads, developers, product managers and other stakeholders to translate complex technical information into clear, concise and structure documentation. Your role will involve ensuring that documentation meets the needs of both technical and non-technical stakeholders, supporting solutioning, integration, ops and app/platform design discussion.

Key Responsibilities

• Create, organise and maintain functional and technical documentation for platform, including architectural, functional flows, data flows, data/entity, micro services, etc.
• Collaborate with solution architects, development leads, developers, and other stakeholders to drive documentation discussion.
• Translate complex technical concepts into clear, structured documentation that is accessible to both technical and non-technical audiences.
• Ensure consistency, accuracy, and completeness of documentation.
• Create and maintain templates and documentation standards to ensure consistency across projects and teams.
• Conduct regular reviews and updates of documentation based on changes.
• Work with cross-functional teams to ensure that all documentation aligns with the platform documentation.
• Facilitate knowledge transfer between development teams, business units, and end-users through detailed documentation

What we are looking for

• Bachelor’s degree in Information Technology, Computer Science, Technical Communication, or a related field.
• At least 3 years of experience as a Technical Writer, Business Analyst, or a related role, with a focus on creating both technical and functional documentation.
• Understanding of software development lifecycle (SDLC) and familiarity with Agile methodologies.
• Ability to grasp complex technical concepts and translate them into easily understandable documents for various audiences.
• Experience with documentation tools such as Confluence, Jira, Excel or similar platforms
• Knowledge of software systems, APIs, databases, and enterprise architectures.
• Strong organizational and communication skills, with a keen attention to detail.
• Proven ability to manage multiple documentation projects simultaneously and meet tight

• Must have Proven work experience with IMPORTED MODULAR SYSTEM FURNITURE or related working experience and familiar with system furniture.
• Equip with interior design background or knowledge;
• Create detailed designs with computer-aided design (CAD) software.
• Ability to use sketchup rendering
• Good math skills.
• Ability to meet deadlines and work under pressure.
• Meticulous in work, eg. careful and with great attention to every detail.
• Ability to work well in a team and on your own.
• Ability to respond well to criticism and maintain a positive attitude.
• Following specifications and design briefs to create layout, elevation and technical drawings.
• Identify potential operational issues and redesign products to improve functionality.
• Ensuring final designs are compliant with building regulations.
• Identifying and communicating potential design problems to the rest of the team.
• Any other assigned duties that may be required.

Job Description:

• Work with application team on challenges to existing batch workflow in Automic and file transfer rule in IBM Sterling with tightened security and address BAU batch and file transfer issues.
• Support for Automic AWA and File Transfer BAU change requests, incidents, and IT projects.
• Support on Audit requirements for batch workflow in Automic and file transfer rule in IBM Sterling by providing detailed RFIs for the client Application systems.
• Support interface connectivity across client internal systems and connectivity with client external partners like Collection Agencies, Government Agencies etc.
• To perform SPS MSSL market trial on-boarding for the active Market Retailers as per User request.
• Support Automic Upgrade project for SIT and UAT Testing.
• Support the ITS SCO and applications team on SFX / Automic Skillset transformation by providing guidance in file transfer event setup and batch job design, creation, and modification.
• Automate the on-boarding and off-boarding trading partner in SFX.
• Improve the provisioning process for Automic and SFX project environment.
• Automate the migration process from QA to PROD for file routing rules.

Job Requirements:

• Bachelor’s degree in computer science, IT, Engineering, or a related field.
• Minimum 4 years of relevant experience in in Automic AWA and IBM Sterling.
• Proficiency in managing and troubleshooting batch workflows using Automic AWA.
• Experience with file transfer rule creation and maintenance in IBM Sterling, including the application of enhanced security measures.
• Familiarity with Agile methodologies.
• Strong cross-team collaboration and communication skills.
• Strong analytical and problem-solving skills.

• Report to the M&E Consultant, assist in coordinating & supervising and ensure proper planning & implementation of M&E installation works in accordance to the approved design and specifications
• Responsible in monitoring project implementation and progress, as well as managing hand-over of the project upon completion.

Requirements:

• Possess Diploma / ITE Certificate in Mechanical / Electrical Engineering.
• Minimum 5 years of relevant experience in supervision of building services.
• Experience in coordination and supervision of M&E installation works of commercial projects and projects that involved additions and alteration works is preferred.
• 1 year term contract
• Apart from M&E supervision work, the successful candidate shall assist to inspect and supervise architectural/interior design works.

Mandatory Skills

Job Summary:

We are seeking a highly motivated and experienced Development Lead to join our dynamic team. The ideal candidate is a hands-on technical leader having a proven track record in leading and mentoring development teams, building high-quality applications using Java, Spring Boot, and SQL. This role requires a strong understanding of software development lifecycle (SDLC), agile methodologies, and a passion for delivering exceptional results in a collaborative environment.

Key Responsibilities:

1. Technical Leadership:

• Provide technical leadership and guidance to a team of developers, ensuring the consistent delivery of high-quality code that meets business requirements and adheres to customer standards.
• Act as the primary technical authority for projects, ensuring alignment with architectural standards and technical requirements.
• Drive the adoption of best practices in coding, testing, and software design.
• Conduct code reviews and provide constructive feedback to improve code quality.
• Champion agile principles and practices within the development team, actively participating in sprint planning, daily stand-ups, sprint reviews, and retrospectives.

1. Development

• Design, develop, and maintain applications using Java, Spring Boot, and SQL.
• Build and maintain scalable, secure, and efficient back-end services and APIs.
• Write clean, maintainable, and well-documented code.
• Ensure software meets both functional and non-functional requirements, such as scalability, performance, and security.

1. Project Management

• Collaborate with product managers, architects, and other stakeholders to gather and define requirements.
• Estimate development efforts, prioritize tasks, and manage deliverables to meet project deadlines.
• Proactively identify risks, bottlenecks, and opportunities for improvement within the development lifecycle.
• Monitor and report on team progress to stakeholders.

1. Team Collaboration

• Foster a collaborative and inclusive team environment.
• Mentor junior team members and provide technical guidance to enhance their skillsets.
• Facilitate communication between team members, business stakeholders, and other technical teams.

Qualifications and Requirements:

• Bachelor’s degree in computer science, Information Technology, or a related field.
• 7+ years of experience in software development, with at least 3 years of experience leading and mentoring development teams.
• Proficiency in Java and frameworks like Spring Boot.
• Strong hands-on experience with SQL and relational database systems such as MariaDB.
• Experience with microservices architecture and containerization tools like Docker/Kubernetes.
• Working experience with testing tools like JUnit, TestNG, Spock, Mockito, etc
• Build cloud solutions with the best industrial practices - elastically scalable, proper fault tolerance, highly reliable, highly secured, and easily managed architecture
• Strong working experience with RESTful API design and implementation.
• Strong understanding of software development lifecycle (SDLC) and agile methodologies
• Understanding of DevOps practices, including CI/CD pipelines and automation tools.
• Experience with monitoring tools like Grafana, or ELK stack.
• Familiarity with cloud platforms such as PCF or OpenShift is a plus.
• Excellent problem-solving and analytical skills.
• Excellent communication, interpersonal, and teamwork skills.
• Experience working in a collaborative and fast-paced environment.

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

We have a vacancy to be a part of a prestigious project in Singapore.

As a Resident Technical Officer (RTO), you will assist in supervising the construction of civil and structural works. You will ensure that all activities comply with project specifications and Building Control regulations, supporting the efficient execution of construction tasks.

The Opportunity

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

· Providing supervision for construction works, ensuring compliance with project specifications and regulations

· Quality control of all civil, structural and architectural works

· Monitor progress of the works on site and any off-site manufacturing facilities as well as report delays immediately

· Support in maintaining records of works, materials, equipment, and contractor schedules, ensuring site safety and compliance

· Help manage the site office, ensuring cleanliness, proper filing systems, seating arrangements, office security, and maintenance of office equipment

· Provide standing supervision as and when required by contractors and provide full support in communicating instructions and ensuring that works are carried out accordingly

· Check drawings, documents and report discrepancies.

Is this role right for you?

• Accredited with IES-ACES with a valid Resident Technical Officer (RTO) Practicing Certificate

• Minimum 5 years of experience as Resident Technical Officer supervising C&S and architecture work

• Experience in supervision of RC construction, slope works, and civil/external works, tree felling and pruning, quality control of architecture works

• Familiar with local regulations/codes for Civil & Structural related to building projects

• Able to resolve site and technical issues, prepare and document detailed site progress reports

• A good team player with effective communication skills and experience in assisting Resident Engineer in supervision works

• Proficient in Microsoft Office

• Knowledge in BIM will be an added advantage.

What we offer you

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Expected start date in May 2025.

Interested candidates are invited to apply by 31 January 2025.

Job Summary:

We are seeking a highly skilled and experienced R2-IDEX Technical Consultant to join our team. As an Application Developer, you will play a critical role in designing, building, and configuring applications to meet business process and application requirements. You will act as a Subject Matter Expert (SME), collaborate with and manage teams, contribute to key decisions, and provide innovative solutions to complex challenges.

Key Responsibilities:

Application Development and Design: Design, build, and configure applications to align with business process and application requirements. Develop innovative solutions to enhance application functionality. Ensure applications are scalable, robust, and meet quality standards.

Team Collaboration and Leadership: Act as a Subject Matter Expert (SME) in SAP for Utilities InterCompany Data Exchange (R2-IDEX). Collaborate and manage cross-functional teams to gather, analyze, and implement requirements. Provide technical guidance to team members and perform code reviews. Make informed team decisions and provide solutions to challenges affecting multiple teams.

Configuration & Release Management: Maintain advanced proficiency in Configuration & Release Management. Ensure effective design and build enablement processes. Manage and streamline build management activities to meet project deadlines.

Troubleshooting and Support: Troubleshoot and resolve application defects and issues promptly. Identify root causes of application issues and implement long-term solutions.

Continuous Improvement: Stay updated with industry trends and best practices to enhance application development and delivery processes. Implement best practices for design, coding, and release management to continuously improve team performance.

Qualifications:

Master Proficiency:

SAP for Utilities InterCompany Data Exchange (R2-IDEX).

Advanced Proficiency:

Configuration & Release Management, Design & Build Enablement, Build Management.

Additional Skills:

• Strong analytical and problem-solving skills.
• Ability to lead and mentor team members.
• Excellent communication and interpersonal skills.
• Knowledge of industry best practices and trends.

Preferred Experience:

• Proven experience in application development and management using SAP for Utilities (R2-IDEX).
• Previous roles involving cross-functional team collaboration and leadership.
• Hands-on experience with configuration and release management in large-scale projects.

Role:

• Assist the Senior Technical Manager in overseeing the technical operations of a fleet of tankers.
• Manage daily maintenance and repair activities, budget survey schedules, and docking operations.
• Maintain updated records of class status and coordinate with Classification Societies, Suppliers, and Contractors for daily operations.
• Ensure adherence to statutory requirements under ISM, ISPS, and MLC.
• Monitor, coordinate, and attend vessel inspections by oil majors, statutory surveys, and follow up on related matters.
• Conduct and report on incident/accident investigations.

Requirements:

• Sea-going experience as a Marine Engineer on Chemical and Oil Tankers and atleast 2 years of shore experience as technical superintendent or fleet manager.
• MOT Engineer Certification (Class 1).
• Strong organizational skills with a hands-on approach to technical troubleshooting and problem-solving.
• Independent, resourceful, and able to work under pressure to meet deadlines.
• Willingness and ability to travel on short notice as needed.

Responsibilities:

• Lead and guide software delivery teams to implement solutions.
• Analyze project requirements, Design and develop software systems and applications to meet customer's needs.
• Work with Project Manager and stakeholders to ensure timely and successful delivery of the project scope within timelines
• Serve as a technical advisor to the development team, offering troubleshooting support and driving issue resolution.
• Prepare and maintain technical documentations and design plans
• Provide System Enhancement Recommendations such as modifications or upgrades to existing software systems and applications to enhance performance.
• Ensure compliance with industry standards, regulations, and best practices (e.g. SGTS, GCC, IM8, etc.)

Requirements

• Experience in infrastructure architecture (on-prem/cloud), database architecture and networking
• 5-8 years of experience in software, systems design and implementation.
• Experience in pre-sales consulting would be added advantage
• Experience as a Solution Architect would be a plus
• Proficiency in software development languages such as Java, Python, C++, or others

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Lead and manage a team of Technical Superintendents to oversee all aspects of the technical management of the vessels including but not limited to safe operations, safety, compliance, crew management, maintenance, and cost control.
• Develop and implement policies and procedures to ensure compliance with regulatory requirements and adoption of industry best practices.
• Oversee and manage the overall budget for the procurement of services, ship spares and stores for the company’s fleet of vessels while ensuring the operational reliability of the vessels are kept to a high standard.
• Set up, review and monitor KPIs for the Technical team and the overall vessels’ performance of the company fleet of vessels and the company’s fleet under 3rd party ship management.
• Develop and maintain good relationships with crew members, shore staff, and both internal and external stakeholders to ensure effective communication and collaboration.
• Manage risk associated with vessel operations and maintenance. Monitor vessel performance and provide regular reports to senior management.
• Provide strong leadership and guidance to the technical management team

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

We are looking for candidates with an interest to develop their technical capabilities to join our team as Technical Service Technicians. Our Technicians play a key role in ensuring our operational efficiency and product quality by performing preventive maintenance and troubleshooting to our production equipment.

Responsibilities:

• Operate manufacturing equipment to meet target production schedule and output
• Provide technical support in troubleshooting of equipment to meet production targets and quality standard.
• Perform daily, monthly preventive maintenance activities to ensure reliability and efficiency of equipment
• Actively participate in workplace safety, quality improvement projects

Requirements:

• NITEC in any Engineering discipline
• Able to read and understand electrical and mechanical diagram
• Able to perform 12 hours shift and is willing to work overtime
• Able to lift weights of 10-15kg.
• Willing to work in controlled environment

Job Description:

• Minimum 8 years of architectural experience with recognised Diploma in relevant field, and at least 5 years of experience in construction supervision for projects of similar scale and complexity in local context.

• Work as Resident Technical Officer to our LTA projects, to assist and report to RE and SRE to monitor all site activities, and any incident, including near-misses. Report any non-compliance to RE and Qualified Person Supervision (QPS).

• Assist Engineer in carrying out supervision for related works include but not limited to replacement and extension, construction and reconfiguration of viaduct/ bridge works, and associated civil works, proposed new flexible pavement and infrastructure, re-alignment of roadways, fencing and construction.

• Prepare daily reports at regular basic and as required by clients.

• Supervise all construction activities and ensure compliance to all plans/drawings, risk assessment and specifications.

• Willing to work on rotation shifts.

• Ensure compliance to all health and safety policies.

• Ensure that contractor and their subcontractor comply with client's safety requirement, and safety checklists are follow.

• Reject poor quality of works at site and inform RE to raise non-conformance notice.

• Assist RE to manage and maintain records and documentation on field or site changes and to monitor adherence to construction schedule.

• Carry out standing supervision for critical site activities based.

• Preferably PR and Singaporean.