• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Tuas Naval Base

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Punggol Digital District

HDB SENIOR RESIDENT TECHNICAL OFFICER

1) Minimum 8 years experience in site supervision of highrise residential projects.

2) Essential to have good knowledge and experience with Architectural, Civil & Structural and M&E works.

3) Possess at least the National Construction Certificate of Supervision (NCCS).

4) Preferable with prior experience in HDB projects.

Job Description & Requirements

a. Diploma in Mechanical or Electrical Engineering or equivalent from tertiary institutions subject to Authority’s Representative’s Approval;

b. Registered as Resident Technical Officer with BCA/IES/ACES;

c. Possess at least 5 years of relevant and practical experience on site

d. Shall be conversant with contract administration, statutory requirements for site supervisors, quality control procedures, and submission of progress reports.

e. Must be willing to do overtime or shift work if requested

f. Preferably Singapore citizen or SPR

g. Contract duration:16 month

Please include the following information in the resume

1. Reasons for leaving current and/or last employment

2. Last drawn and/or current salary in Singapore Dollar

3. Expected salary in Singapore Dollar

4. Date of availability and/or Notice Period

5. A current photograph

6. Latest RTO Cert

The Resident Technical Officer shall be directly responsible to the Consultant (Architect) / Project PM for the duration of the construction of the Works.

Shall assist in the supervision of the construction of the Structural Works under the Building Control Act and to render all assistance as may be required by the Consultant (Civil & Structural Engineer) and the Consultant (Mechanical & Electrical Engineer). For HDB Project Civil & Structural / Architectural Works:

Diploma in Civil Engineering or Structural Engineering or equivalent.

Registered RTO accredited by the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES).

Preferred applicants with Certificate in Building Construction Safety Supervisors Course.

Ensure that building contractor embrace good construction practise to achieve good workmanship.

Minimum 5 years relevant experience in supervision of building projects in Singapore.

Must have HDB/ BTO projects with commercial buildings supervision experience.

Availability to commence work on short notice.

Able to work night shift and rotational Sunday duties.

DSTA & CAG project experience is preferred.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act. Please refer to Annex A for more details on the list of responsibilities for RTOs.
• To carry out site supervision and inspection of the works including any off-site manufacturing as instructed by the Client, PM, SO, SOR and QP to ensure that works are constructed to required quality and accuracy.
• To monitor progress of the works on site and at any off-site manufacturing facilities and ensure that the site programme is in accordance with the approved construction programme. Any deviations from the construction schedule shall be reported immediately to the Client, PM, SO, SOR and QP. In the event of delays, the Resident Technical Officer shall assist the contractors to mitigate delays but without comprising on the quality.
• To ensure and maintain proper updated records of all works done, including records of tests, inspections, status of works, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities, etc and all other records as directed by Building Control Authorities.
• To study the contract documents and drawings and verify if there are any discrepanciesamong the drawings. All discrepancies shall be brought to the attention of the Employer concerned.
• To ensure that all installation methods and material used are in accordance with the contract drawings and specifications, and report to Client, PM, SO, SOR and QP on any materials that are not conforming to the specifications
• To liaise with the Main contractor and the Architect / M&E / C&S Engineer in the checking and approval of shop drawings, catalogues and samples.
• To liaise with the Main contractor in resolving site problems. All problems on site shall be referred immediately to the Client, PM, SO, SOR and QP. The Resident Technical Officer shall issue sketches or directions as and when necessary. All site memos shall be copied to the Employer.
• To ensure that the Main contractor comply with the Ministry of Manpower’s guidelines and recommendations for construction safety and the owner’s in-house safety management system.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings.
• To follow up and report to relevant Employer within three (3) days for site issues raised during the meetings.
• To manage the team of supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements and supervisors’ overtime claims.
• To ensure that all reinforcement, formwork, penetrations, etc. are finally checked prior to concreting. All concrete pours during office hours and all critical pours even after office hours shall be supervised by you personally (i.e. standing supervision).
• To record collate and file all incoming and outgoing design, shop, construction and coordination drawings. All old construction drawings shall be stamped ‘superseded’ and no checking shall be carried out on the superseded drawings.
• To generate defects list, supervise and monitor progress of rectification works and ensure that all defects are rectified as per Employer’s advice.
• To advise the Employer on the percentage of works completed for the purpose of verifying progress payment valuation, and to check contractor’s claims and variation orders.
• To ensure that the contractors record accurately on drawings, the installation works on site. This is to ensure that the as-built drawings reflect accurately the work that has been done on site. Also to check against the Employer’s drawings and identify and highlight the changes of variation orders so that Employer can direct the contractor to finalise the as-built drawings and to maintain a set of updated drawings on site.
• To check on quality of materials delivered to site and report to Client, PM, SO, SOR and QP of any materials that are not conforming to the specification. And to verify reports and claims submitted by contractors and to certify and sign on Delivery Orders
• To submit daily reports and updates to HDB based on an approved format. This will include and not limited to daily noise meter readings, daily safety and manpower reports.

Qualification

• Diploma in Civil/Structural Engineering or an equivalent certificate from a recognized institution/university or acceptable to the Commissioner of Building Control.
• Registered RTO (with BCA / IES / ACES) with Min. 5 years of RTO experience, institutional Project working experience preferred
• Good understanding in construction drawings and specification for Structural and / or Architectural works
  Familiar with Singapore Building Control Act and Construction Regulations.
• Good knowledge or experience in several aspects of construction activities
• Experienced in Coordinating Architectural / Structural works with project team
  

• Clementi
• Monday to Friday 830am-6pm
• Salary up to $4700 depends on experience
• L1/ L2 support

Responsibilities:

• Manage and configure IT infrastructure, including systems, applications, network devices, and end user devices, ensuring seamless operations.
• Implement and monitor automated backups, disaster recovery plans, and patches while closely tracking system resource utilization.
• Collaborate with vendors and ensure compliance with Service Level Agreements (SLAs).
• Develop and maintain technical documentation, including user guides and administrative procedures.
• Provide technical support to both local and international users, ensuring network security and efficient resolution of issues.

Requirements

• Minimum Diploma in IT/ Computer Science
• Proficient in managing Microsoft Server and enterprise networking
• Skilled in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall)

Interested candidates, please send in updated resume through “APPLY NOW” or

Email: [email protected]

Whatsapp: 97896683

Dorothy Ooi Shi Hui

Registration Number: R1762852

Workstone Pte Ltd

EA License Number: 19C9998

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Scope :-

• Track, Monitor, Control & Update Work Progress on Site
• Plan & Schedule for Site Inspections according to Work Progress Status
• Coordinate and Schedule draw 3D Drawings & Sample Submission for Approval to client
• Conduct Regular Internal Review meetings with Trade Contractors for Site Arrangement, Work Progress, & Technical Resolutions
• Perform Authorities submission including MOM, LTA, NEC, SCA, and any others deemed necessary for the site nature
• Support current direct sales activities
• Creation for new customer
• Support distributor’s sales activities
• Creation, maintenance and management of Social Networking Services content in each country
• Sales Tool Preparation (Clinical Data)
• Business planning
• Contract & negotiation with new Distributor
• Network building with the same industry
• Cultivate new customers
• Other ad-höc duties assigned

Job Requirements :

• Engineering or above on Electrical or Mechcaniacl flied or related discipline any bachelor degree
• At least 3-4 years of experience in A&A work and technical coodinator to lead the bussiness
• Strong leadership to monitor workers for the works executed
• Demonstrate ability to handle Work independently and efficiently
• Good interpersonal skills and be able to interface with all levels, internally and externally, in a responsive manner.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Provide advice and resolve creatively any emerging problems/deficiencies
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Comply with guidelines and regulations including permits, safety etc and deliver technical files other technical documentation as required
• Other ad-hoc duties assigned

About the Role:

As a CBRE Contract Support Associate, you will provide exceptional customer service and administrative support to a large Business Unit, Facility, or Account. This job is part of the Contract Quality Management job function. They are responsible for managing the delivery of contractual services to ensure requirements are fulfilled.

What You’ll Do:

• Respond to client inquiries and concerns and ensure timely and quality service delivery and follow-up to ensure satisfaction.
  Understand the scope of the contract and make sure that all work is carried out accordingly.
  Be a financial and operational systems champion.
• Suggest efforts to put in place cost-saving opportunities to maximize customer and financial savings targets.
  Coordinate and onboard vendors for reactive and planned works and manage sub-contractor paperwork.
  Review processed invoices and ensure accurate cost center coding. Coordinate the billing application, calculating margins, raising invoices, and submitting to clients.
• Work closely with site teams and head office, ensuring accurate processing of quotations and purchase orders.
• Review and approve maintenance billing invoices and projects as per contracted agreements. Ensure consistent delivery of core operational and financial outputs on the account.
• Respond to inquiries on financial reports for Accounts Receivable, Payable, and open POs.
• Deliver monthly reporting support on Contract and Business Unit Reviews.
• Assist in ensuring compliance with Health & Safety requirements, including HSE reporting and promoting a safe work environment.
• Maintain QHSE documentation and ensure it is available using company systems.
• Gather and analyze data to identify and solve complex problems that arise with little or no precedent. May recommend new techniques.
• Impact own team and other teams whose work activities are closely related.
• Suggest improvements to existing processes and solutions to improve the efficiency of the team.
  
  What You’ll Need:
• High School Diploma or GED with 3-4 years of job-related experience.
• A comprehensive understanding of a range of processes, procedures, systems, and concepts within own job function is required.
• Ability to evaluate and communicate unusual and/or complex content in a concise and logical way.
• In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Organizational skills with an advanced inquisitive mindset.
• Advanced math skills. Ability to calculate advanced figures such as percentages, discounts, and markups.

• Inspection and supervision of Archi work.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

Qualification

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.

Job Description & Requirements

• Review and interpret project plans, drawings, and specifications.
• Coordinate with project managers, engineers, and contractors to address and resolve technical issues.
• Conduct site inspections and prepare detailed reports on work progress, compliance, and any deviations from the plans.
• Ensure all construction activities comply with relevant environmental and safety regulations.
• Liaise with local authorities and stakeholders to obtain necessary permits and approvals.
• Maintain accurate and comprehensive records of all site activities, inspections, and incidents.

Requirements:

• Diploma/Degree in Civil Engineering or related field.
• Minimum of 5 years of experience in relevant field.
• Certified Resident Technical Officer (RTO) with accreditation from the Singapore Institute of Engineers (IES) or other relevant bodies

Job Description Summary

As a Technical Solutioner, you will be responsible for the development of complex integrated solutions for Kyndryl Infrastructure, Project, and Consulting services and value directly to customers. You will also develop and manage customer relationships with solution decision makers in the Infrastructure and Customer Line of Business organizations. You will own the end-to-end solution to the customer, RISK identification/mitigation, Cost, Profit, and deliverability of the overall solution for our most complex engagements. This is a customer facing role in which 40 to 50% of the time is spent in face-to-face discussions with customers and typically working on two to five engagements at a time.

You will work on multiple client accounts and be responsible to review the customer's products and determine book pricing, using a general understanding of product costs to offer better solutions, and responsible for pipeline creation through working with alliance partners and responsible for total customer ownership involves reviewing the customer's entire landscape of security products, developing high-level pricing, and identifying ways to improve efficiency. You will also be capable of analyzing an infrastructure to identify and resolve legacy issues or problems. Success is measured by the number of deals won.

Your Future at Kyndryl

Every position at Kyndryl offers a way forward to grow your career. We have opportunities that you won’t find anywhere else, including hands-on experience, learning opportunities, and certification programs. Whether you want to broaden your knowledge base or narrow your scope and specialize in a specific sector, you can find your opportunity here.

Job Description

Who you are

You’re good at what you do and possess the required experience to prove it. However, equally as important – you have a growth mindset; keen to drive your own personal and professional development. You are customer-focused – someone who prioritizes customer success in their work. And finally, you’re open and borderless – naturally inclusive in how you work with others.

Required Technical and Professional Experience

• Minimum 5 - 10 years of experience in customer technical solutioning

• Having customer success background

• Understanding on Total Customer Ownership

• Possesses strong architecture methodologies in-depth knowledge of leading-edge technology solutions with industry and business skills to influence clients and sell Kyndryl solutions. Requires expertise in Hyperscale’s, being a certified professional

• Excellent communication and presentation skills, with the ability to convey complex technical insights to both technical and non-technical audiences

• Works closely with customers to understand their goals, needs and constraints, establish the vision, convert business and technical requirements into architectural designs

Preferred Technical and Professional Experience

• Relevant security technology industry exposure and hands-on security experiences

• Clementi
• Monday to Friday 830am-6pm
• Salary up to $4700 depends on experience
• L1/ L2 support

Responsibilities:

• Manage and configure IT infrastructure, including systems, applications, network devices, and end user devices, ensuring seamless operations.
• Implement and monitor automated backups, disaster recovery plans, and patches while closely tracking system resource utilization.
• Collaborate with vendors and ensure compliance with Service Level Agreements (SLAs).
• Develop and maintain technical documentation, including user guides and administrative procedures.
• Provide technical support to both local and international users, ensuring network security and efficient resolution of issues.

Requirements

• Minimum Diploma in IT/ Computer Science
• Proficient in managing Microsoft Server and enterprise networking
• Skilled in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall)

Interested candidates, please send in updated resume through “APPLY NOW” or

Email: dorothy(a)workstone.com.sg

Whatsapp: 97896683

Dorothy Ooi Shi Hui

Registration Number: R1762852

Workstone Pte Ltd

EA License Number: 19C9998

Job Description & Requirements

• Review and interpret project plans, drawings, and specifications.
• Coordinate with project managers, engineers, and contractors to address and resolve technical issues.
• Conduct site inspections and prepare detailed reports on work progress, compliance, and any deviations from the plans.
• Ensure all construction activities comply with relevant environmental and safety regulations.
• Liaise with local authorities and stakeholders to obtain necessary permits and approvals.
• Maintain accurate and comprehensive records of all site activities, inspections, and incidents.

Requirements:

• Diploma/Degree in Civil Engineering or related field.
• Minimum of 3 years of experience in relevant field.
• Certified Resident Technical Officer (RTO) with accreditation from the Singapore Institute of Engineers (IES) or other relevant bodies

Are you a Technical Assistant working closely with the Technical Superintendent and looking to join a well established and grwoing shipping company in Singapore?

You will be responsible for:

• dry dock and repair project planning, execution, and close-out, attending the project site when required.
• Assist with OPEX budget preparation.
• Assist with service engineer arrangement and coordination for boarding.
• Review, maintain and prepare vessel shareholder presentation for agreed submission dates.
• Maintain record of the fleet service arrangements & EOM reports including technical bulletins from makers.
• Complete monthly post meeting reports for Charterers / Fleet.
• Administer the disbursement account, detailing line items and account codes.
• Review and respond to Management Meeting minutes.
• Send to vessels Class status report monthly including expiring certificates status.
• Assist works related EU ETS, EUMRV and IMO DCS.
• Any other documentary and filing works as required by team
• Support with Guarantee claims administration.
• Assist Survey and Audit Requirements (internal and external)
• Monitor and provide progression reports on the Teams “Management of Change”.
• Review and maintain fleet weekly operational records data monthly KPI data and ensure fleet team are informed.

Benefits: 2 days work from home weekly, working hours until 5:30 pm, AWS and Variable bonuses

Please note that this role is only open to Singaporeans or SPR's and only shortlisted candidates will be notified. We thank you for your understanding.

Apply Now!

Job Objectives/Job Summary:

As Project Engineer, he/she has to plan, develop and manage any project that is construction based. He/she has the duty of facilitating the construction designs and ensures that these designs are implemented with utmost safety and that the whole process flows efficiently. He/she has to ensure that the materials in use are safe and that the methods being used are appropriate.

Responsibilities/Duties:

• Assist Project Manager in site supervision.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Managing and planning the construction project.
• Assist in project tendering, budget for the project within an estimated cost.
• Controlling the cost of the materials and labor.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Monthly project status reports and change orders.
• To manage the daily operation of the project execution.
• Arm their juniors with relevant information on construction.
• Advising the workers on the construction process and addressing their concerns.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• Ensure that all the construction safety rules and regulations are being observed.
• Obtaining the construction materials and verifying them.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensuring that the project starts on time and ends within the estimated duration.
• Ad-hoc assignments.

Job Specifications/Requirements:

• Degree in Mechanical / Electrical / Civil & Structural Engineering.
• Have prior 1 year working experience in construction industry.
• Experience in Additions & Alterations (A&A) works in commercial building upgrading project will be an advantage.
• Must have comprehension for written or verbal graphic instructions.
• Must possess good communication skills.
• Relevant site experience.
• Knowledge in Microsoft office (Excel, Word).
• Knowledge in air-conditioning, ducting, piping, etc and have testing & commissioning experience (for Mechanical field).
• Must have ability to write / understand engineering reports.
• Have excellent problem solving skills
• Good team player and customer-focused with excellent communication skills
• Able to work independently with minimum supervision.
• Able to work under pressure with high initiative.

Selected candidates would have the opportunity to work islandwide projects located in Singapore.

Job Objectives/Job Summary:

As Project Engineer, he/she has to plan, develop and manage any project that is construction based. He/she has the duty of facilitating the construction designs and ensures that these designs are implemented with utmost safety and that the whole process flows efficiently. He/she has to ensure that the materials in use are safe and that the methods being used are appropriate.

Responsibilities/Duties:

• Assist Project Manager in site supervision.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Managing and planning the construction project.
• Assist in project tendering, budget for the project within an estimated cost.
• Controlling the cost of the materials and labor.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Monthly project status reports and change orders.
• To manage the daily operation of the project execution.
• Arm their juniors with relevant information on construction.
• Advising the workers on the construction process and addressing their concerns.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• Ensure that all the construction safety rules and regulations are being observed.
• Obtaining the construction materials and verifying them.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensuring that the project starts on time and ends within the estimated duration.
• Ad-hoc assignments.

Job Specifications/Requirements:

• Degree in Mechanical / Electrical / Civil & Structural Engineering.
• Have prior 1 year working experience in construction industry.
• Experience in Additions & Alterations (A&A) works in commercial building upgrading project will be an advantage.
• Must have comprehension for written or verbal graphic instructions.
• Must possess good communication skills.
• Relevant site experience.
• Knowledge in Microsoft office (Excel, Word).
• Knowledge in air-conditioning, ducting, piping, etc and have testing & commissioning experience (for Mechanical field).
• Must have ability to write / understand engineering reports.
• Have excellent problem solving skills
• Good team player and customer-focused with excellent communication skills
• Able to work independently with minimum supervision.
• Able to work under pressure with high initiative.

Selected candidates would have the opportunity to work islandwide projects located in Singapore.

• Assist the Project Manager at construction site.
• Ensure works are carried out according to the approved technical drawings, quality procedures, ISO and EHS requirements.
• Ensure quality of works is achieved and safety regulations are complied with authorities requirements.
• Ad-hoc matters as assigned by the Project Manager.

EA Licence No. 16C7962

We are seeking a highly skilled and motivated Projects Engineer - Industrial Automation to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design, development, and execution of industrial automation control systems, ensuring the successful delivery of high-quality projects and maintaining client satisfaction.

Key Responsibilities:

• PLC, SCADA, and HMI Systems Development: Program and develop automation systems using Siemens, Rockwell, Wonderware/AVEVA, and other relevant platforms.
• Control Panel & Electrical Architecture Design: Design and develop electrical systems and control panels to meet project requirements.
• Factory Acceptance Testing (FAT): Conduct Hardware and Software FAT to ensure the system meets specifications and requirements before delivery.
• Site Acceptance Testing (SAT): Perform testing and commissioning of automation systems at client locations to ensure they function as expected.
• Technical Support for Sales Team: Provide technical assistance to the Sales team during project bidding and tender processes.
• Onsite & Remote Support: Offer technical support for ongoing projects, both onsite and remotely, to address client needs and resolve any issues.
• Quality Control: Ensure that all project deliverables meet the required quality standards and specifications.
• Team Collaboration: Work closely with cross-functional teams, including project managers, engineers, and clients to ensure effective project implementation.
• Travel Requirements: Travel within Singapore and internationally (including offshore Oil & Gas facilities) for project implementation and meetings as necessary.We are seeking a highly skilled and motivated Projects Engineer - Industrial Automation to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design, development, and execution of industrial automation control systems, ensuring the successful delivery of high-quality projects and maintaining client satisfaction.

Requirements:

• Experience: 3-6 years of hands-on experience in industrial automation and digitalization.
• Automation Systems Expertise: Proficiency in programming and working with PLC, SCADA, HMI systems, preferably using Siemens, Rockwell, Wonderware/AVEVA platforms.
• Control Panel Design: Experience in designing and developing electrical architectures and control panels for industrial systems.
• Knowledge of Communication Protocols: Strong understanding of various communication protocols used in industrial automation (e.g., Modbus, Profibus, Ethernet/IP, OPC).
• Industry-Specific Knowledge: Familiarity with automation technologies specific to the Pharma, Oil & Gas industries is an advantage.
• Education: Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or a related field.
• Technical Support & Troubleshooting: Ability to provide both onsite and remote technical support and troubleshooting during the execution of automation projects.
• Communication Skills: Strong verbal and written communication skills for interacting with clients and team members.
• Team Player: Ability to work effectively in a team-oriented environment and collaborate with colleagues and clients both locally and internationally.
• Flexibility & Problem Solving: A flexible approach to work, with strong problem-solving abilities to overcome challenges during project implementation.
• Growth Mindset: A willingness to continuously learn and develop skills to grow within the company and the field of industrial automation.

Interested candidates are invited to send their CV/Resume to: [email protected]

We look forward to your application!