Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Requirements:

• Under the Building Control Act, RTOs shall be accredited with Joint Accreditation Committee of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES)
• Proficient in using Microsoft Word, Excel and PowerPoint.
• To carry out supervision and inspection of the works to ensure that works are constructed in accordance to contract specifications and drawings
• At least 4 years relevant working experience in HDB BTO Project as RTO.
• Preferably need to complete one full cycle of BTO project Under consultant Side.
• Job Duration : 30-36 Month
• Job Location : Punggol, Tampines, Kallang

Job Descriptions

• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings, and site instructions by the supervising qualified persons and project consultants.
• Check and supervise the work according to the contract documents and ensure that the methods, procedures and materials used comply with the prevailing statutory standards.
• Ensure that the contractors carry out their work in compliance with Building Control Act and Regulations, Codes of Practices and requirements of building authorities and government agencies.
• Liaise with the engineers on the review and approval of design calculations and drawings.
• Assist Engineer/ QPs in their supervisory and coordination duties.
• Review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site and progressively throughout the entire course of the project.
• Observe and comply with site safety, and submit all reports as directed and ensure that works are carried out in a safe and proper manner.

Requirements

• Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post-Graduate Diploma/Professional Degree in any field.
• At least 1 Year of working experience in the related field is required for this position.
• Must be registered as Resident Technical Officer (RTO) with BCA/IES/ACES.
• Required Skill(s): Microsoft Office, Autocad.
• Shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Must be a team player with strong leadership, communication, and supervision skills.
• Immediate vacancy

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board
• Maintain max passing yield results
• Test Board Maintenance activities (Perform socket replacement and testing)
• Identify Issues
• Reporting of service activities
• Management of spare socket inventory

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Requirement:

• Degree in Civil/Structural Engineering or equivalent.
• Recognized by PEB Board/IES.
• Must have at least 2 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.
• Develop and maintain the project schedule.
• Develop, monitor and review equipment and manpower deployment plans.
• Responsible for developing and updating the various stages of pre-construction and construction programs.

Responsibilities:

• Install, test, commission, and conduct preventive and corrective maintenance (PM & CM) on healthcare equipment/systems.

• Address and resolve recurring issues promptly to ensure consistent customer satisfaction.

• Plan and schedule PM or CM tasks efficiently.

• Provide post-sales support as needed.

• Coordinate with manufacturers, vendors, contractors, and clients for project management.

• Assist the project team in executing projects smoothly.

• Respond promptly to service calls.

• Collaborate with team members to gather feedback and identify prospects.

• Undertake any additional tasks as assigned.

Requirements:

• NITEC/Diploma in Electrical/Electronic/Biomedical Engineering or equivalent.

• Proficient in using software-assisted technical service diagnostic and testing equipment.

• Minimum of 2-3 years' relevant experience preferred; fresh graduates with a keen learning attitude are encouraged to apply.

• Strong interpersonal skills and customer service orientation.

• Good command of English and familiarity with Microsoft Office and IT tools.

• Self-motivated, diligent, and reliable.

• Possession of a valid driving license is advantageous.

• Able to work independently as well as part of a team.

• Fluent in both spoken and written English.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Responsible for accompanying the RTO/RE during inspection and ensuring compliance against specification and CONQUAS requirements

· Oversees concrete cube-taking process for the compressive strength tests, and ensures proper compaction and concrete curing conditions for compliance with the specified compressive strength.

· Monitor concrete cube test results and maintains such laboratory test report in files

· Responsible for processing and upkeep of timely inspection records

· Responsible for reporting on accomplished schedules to PM

· Responsible for QEHS corrective and preventive actions.

· Coordinate and Monitor all C&S trade

· Coordinate with others discipline (M&E and Architecture) for all technical issues found in construction drawings

· Check all drawings and prepare RFI for all discrepancies

· Coordinate and submit all materials to consultant for approval

· Coordinate with BIM team for all C&S matter

· PE Submission and tracking

· Precast Monitoring and updating

· All structural technical matters

· Monthly progress report

· Other adhoc duties as assigned by Project Manager

Requirement:

· Candidate must possess at least Degree in Civil Engineering, preferably recognize by PE Board

· At least 3 years of local relevant experience in civil/ building works

· Proficient in Microsoft Office & AutoCAD, basic knowledge for BIM software like Revit

· Independent, self-motivated with excellent team spirit

· Candidate with HDB experience would be an advantage

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

JOB SCOPE:

· Implementation and manage in house IT and/or Project’s IT requirement and implementation, with higher emphasis to Cloud related Infrastructure.

· Setup and maintenance of cloud services (GCC, AWS, Azure, Google Cloud, etc).

· To be involved in Cloud architecture design.

· Review technical design, identify Security Vulnerabilities, and provide necessary recommendation to improve overall Security.

· Prepare and submit Project IT and IT Security documents.

· Prepare and submit of Test & Commissioning documents related to IT Security.

· Oversea or Lead the Testing & Commissioning of IT System and Security Testing.

· Perform IT security hardening and mitigation when applicable.

REQUIREMENT:

• Degree in Information Technology or Computer Science or a related discipline;

• Excellent knowledge on Cloud setup, which includes but not limited to AWS, Azure and Google Cloud.

· Good knowledge in IT, IT Security and Network.

• Resourceful and problem-solving aptitude.

• Excellent communication skill.

• Working experience in IT Infrastructure, IT security and Network implementation.

• Experience with Windows Server, Active Directory, SCCM, Endpoint Configuration Manager, Group Policy, Virtualization (vmware/hyper-v), networks (LAN, WAN) and patch management.

• Good Knowledge of system security (e.g. Firewall, Intrusion Detection Systems etc) and data backup/recovery.

• Professional certification in IT and IT Security is a plus.

• Proven leadership in managing IT team is a plus.

• Proven experience in Government Computing Cloud is a strong plus point.

• Familiar with terraform would be a strong plus point.

Job Requirement:

• Degree in Civil/Structural Engineering or equivalent.
• Recognized by PEB Board/IES.
• Must have at least 2 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.
• Develop and maintain the project schedule.
• Develop, monitor and review equipment and manpower deployment plans.
• Responsible for developing and updating the various stages of pre-construction and construction programs.

Micron is seeking a highly motivated and experienced individual contributor to join our Assembly Package Technology Development (TD) team. As a Sr/Engineer in the Process Development team, you will play a crucial role in developing and qualifying new materials, equipment, and wafer tech nodes for Micron's world-class products and devices.

• Primarily responsible for Cleanroom 1 (CR1) Area processes such as Wafer Grinding/ Stealth Dicing/ Laser Groove/ Die Separation/ and Wafer Saw. Cleanroom 2 (CR2) Flip Chip Underfill, Die Attach, and Wirebond
• Development and Qualification of new direct and indirect materials, new equipment, and new wafer tech nodes.
• Ensure product quality and process performance while driving projects focused on cost reduction, productivity improvement, risk mitigation, and resolving manufacturing challenges.
• Collaborate and lead teams from various departments to ensure smooth development transfer to all Micron network sites.
• Familiarize and implement PMI (Product Maturity Index) methodology and provide accurate documentation for product transfer.
• Develop, configure, and optimize Package Assembly processes (Front End, Bonding, and Back End) for Micron's memory products from pathfinding to NPI start-up and certification.
• Collaborate with Design teams globally in the development of assembly design rules, involved in the design approvals (Substrate and Silicon), running, testing and upgrading systems and processes, and approving materials, process, and equipment changes in the CCB (change control board).

Requirements:

• Masters/Bachelor's Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics
• At least 5 years of experience in the semiconductor industry with proven knowledge and skills in assembly
• Excellent problem-solving skills and familiarity with data-driven analysis, statistical analysis, and data interpretation.
• Strong project management skills and ability to multitask to ensure the execution of timelines.
• Strong collaboration skills to work closely with diverse teams and gain insights into business needs and customers' requirements.
• Deep fundamental understanding of key risks in Cleanroom 1 processes and Cleanroom 2 process
• Multiple process capability is a plus

Responsibilities:

• Lead and execute software testing efforts for banking and financial domain applications, including CRM, campaign management, and wealth management.
• Develop test plans, test strategies, estimates, and metrics to ensure comprehensive coverage.
• Define and implement nonfunctional scenarios for performance testing and automation test cases.
• Conduct functional, ETL, SIT, UAT, E2E, file testing, regression testing, data migration testing, and support UAT processes.
• Perform testing on diverse systems, including Teradata, Oracle SQL, PL/SQL, and ETL platforms.
• Execute API testing using tools like Postman and technologies such as Kafka and Adobe Analytics.
• Work with front office applications like RM Desktop-PEARL, Cross Border Communication BCBOH, and KYC onboarding tools (ICE, EUCLID).
• Lead project calls with clients to ensure effective onsite-offshore coordination and allocate tasks to subordinates.
• Collaborate with business stakeholders as a functional business analyst, gathering requirements, and managing UAT testing.
• Handle test scenarios, traceability matrix preparation, test case development, and execution in an Agile environment.
• Use tools such as ALM, JIRA, Unix, UFT, and Selenium for test management and automation.
• Generate comprehensive project reports and maintain all project trackers, including dashboarding, individual progress tracking, and issue management.
• Provide guidance, mentoring, and training to junior team members.

Qualifications:

• 10+ years of experience in software testing within the Banking and Financial Domain.
• Expertise in CRM applications, campaign management, data warehouse processing, and front office systems.
• Hands-on experience in performance, integration, functional, E2E, security, rollback, and API testing.
• Proficiency with Oracle SQL Server, PL/SQL Developer, Dream Quark, IBM IIDR CDC, Toucan Toco, ELK, BI4, Ambari, Hive, and other databases and data visualization tools.
• Knowledge of cash equities, bonds, equity derivatives, credit cards, trade lifecycle, and corporate action lifecycle.
• Familiarity with CI/CD tools like Jenkins, Bitbucket, SonarQube, and knowledge of automation tools such as UFT and Selenium.
• Strong communication, leadership, problem-solving, and interpersonal skills.
• Ability to work independently, prioritize tasks, and meet deadlines.

Responsibilities:

• To lead and drive the requirements gathering process.
• To lead and manage a small team of developers to deliver the modules to develop web-based application systems.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based).
• Lead and manage the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

Requirements:

• A Degree/Diploma in Computer Science with at least 3 years' software development experience in Internet technology in Win NT, UNIX or LINUX platform
• Those with leadership experience may be considered for the Project Lead position.
• Technical skills include proven object-oriented programming experience with Java and C++ together with extensive RDBMS through JDBC
• Experience in J2EE, Web Services and XML will be advantageous
• Experience in Elixir reporting solutions will be advantageous
• Very strong in SQL
• Data analysis skill will be an added advantage, although this is not compulsory to have.
• Good interpersonal skills

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

As a Technical Support Engineer - Instrument/Electrical Engineering, you will:

• Complete our New Hire Orientation and a thorough training program where you learn about our products, customers and company culture via classroom training, customer interactions, visiting operating facilities, shadowing and hands on experience helping customers get value from their software systems.
• Enable our customers’ success to manage their operations by supporting them remotely through phone, email, web channels or on-site to best serve their environment while performing a variety of complex technical challenges.
• Teach our customers how to use our software as an instructor for public classes, or assist in the development of your peers by getting involved as an internal instructor or job trainer
• Develop your business acumen by communicating frequently with our customers to understand how they utilize our software to solve their business challenges, and by collaborating with different AVEVA departments to deliver and improve our customers’ experience with our company and products.
• Grow your technical skill-set by developing a solid foundation in the AVEVA Engineering software portfolio, related software and industry technologies.

We’re looking for:

• Self-motivated individuals with a customer mindset and desire to help people
• Enthusiasm for technical problem solving, with attention to detail and strong communication skills
• Ability to learn and research in a dynamic and engaging environment
• Knowledge of Instrument/Electrical Engineering
• Proven 3 years or more experience of AVEVA products or similar technologies.
• Proven 4 – 7 years or more knowledge of the plant engineering, design, procurement and construction business either from an owner-operator or an engineering contractor background.