• To Check all drawings, specifications and schedule of works as per the contract document and reporting the discrepancies to consultant and contractor in order to avoid progress delay.
• Full-time site supervision and inspections to ensure that all structural works are carried out as per approved specification and also as per drawings with approved material in an appropriate sequence and methods.
• Inspect and monitor quality of architectural finishing materials delivered to site and quality of workmanship.
• Carry out supervision and co-ordination of architectural works of the project and shall exercise all reasonable skill, care and diligence in discharge of the contract.
• Assist RE in supervision and inspecting all structural works.
• Assist CPM in site progress and update proper site records about the progress of work and documentation.
• Attend site meetings and site walks with clients and consultants.
• Ensure timely submission of shop drawings, method of statement, other technical submissions, material samples and trade demonstration by the contractors.
• Assist and co-ordinate with consultants to resolve any technical and interfacing issues.
• Familiar in consultant Quality Management System and make proper documentation for QMS audit to comply HDB audit.
• Liaise with contractor on work schedule, progress, work quality and quality control etc.,
• Witness and verify any field test carried out on site.
• Monitoring Site Instrumentation report (Settlement marker, Vibration report, Noise meter).
• Update Monthly progress report and daily site activities report.
• Enforce quality control, Safety management, Vector control and tidiness of the work site.
• Update monthly Consultant Safety and Vector report.

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.

• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.

• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.

• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.

• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.

• Support Quality Team in the design and fabrication of test/measurement fixtures.

• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

Your areas of knowledge and expertise that matter most for this role:

• Excellent technical analytical ability with strong interest for problem solving.

• Self-motivated team player with good interpersonal and communication skills.

• Past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred.

• 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

*Please note that Cyrus is in the process of relocating its office to Loyang by Q4 2024.

• Assist project manager in planning and execution of project plans at the construction site,
• Execute project plan and ensure works are completed as per the schedule and in accordance with contract specification and design drawing.
• Ensure the construction site fulfills the authority's code of practice and complies with house safety rules & regulations.
• Handle correspondence job paperwork and submission.
• Liaise with all parties involved in the project, including authorities, consultants, clients, subcontractors, and suppliers.
• Attend site meetings and inspections, regularly report on progress, and monitor the schedule.
• Prepare site meeting minutes, monitor work schedules, project costing, and procurement, and coordinate with all parties to ensure work progress is completed within the target time and budget.
• Supervise and report the progress of the work to the Project Manager.
• Update construction drawings,
• Give feedback to the project manager on any issue encountered on-site and propose a feasible solution.
• Any other ad-hoc duties assigned by the Project Manager,
• Review of civil & structural working drawings and shop drawings
• Organizing regular meetings with sub-contractor’s technical teams to resolve technical problems in pre-construction and construction phase.
• Preparation of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspections with RTO.
• Reviewing and site supervision of site work.
• Assisting project manager for planning and preparing daily progress reports.
• Tracking and optimizing manpower for each works.

Salary - ($5,500 - $7,500) + AWS

Location – Commonwealth

Job Description:

● Develop project plans, ensure accurate delivery forecasts, pursue new business opportunities, and exceed customer expectations through collaborative efforts.

● Strive to achieve a Customer Net Promoter Score of 4.0 or higher

● Lead architecture reviews with project stakeholders

● Be responsible for technical account management and to provide reporting to customers as required.

● Assist in bid management activities for sales and solutions teams.

● Contribute to productivity and innovation initiatives and programs

● Cultivate a reputation as a trusted advisor to clients.

● Foster strong relationships with technology vendor partners as required.

● Design and architect Network, Infrastructure and Cloud architecture models with a hybrid emphasis.

● Deploy, configure, and maintain Wintel servers (especially HPE/Dell servers), VMware virtualization platform, Microsoft server products, and related security software.

● Manage and configure Cisco switches, firewall devices, Fortigate, and load balancers.

● Develop and maintain scripts and automation tools to optimize IT infrastructure.

● Define IT operational or governance standards, tools, and other related best practices.

Job Requirements:

● Be comfortable to be involved in hands-on design, configuration, installation, performance tuning, and POCs.

● Minimum Diploma in Information Technology or equivalent

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to $4500
• Variable bonus
• Location: Serangoon
• 5 days work week, 8-6pm

Key Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electronics Engineering
• Min 2 years of relevant work experience in electronics manufacturing indusrty

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

• Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).
• Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.
• Installs, configures, and tests operating systems, application software, and system management tools.
• Ensures the highest level of systems and infrastructure availability.
• Evaluates the existing systems and provides the technical direction.
• Plans and implements system automation as required for better efficiency.
• Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Experience:

• Computer science degree
• Scripting and programming proficiency
• OS and Network experience
• Certification may be helpful

Job Description

The job involves the supervision of MRT projects Cross Island Line.

For those with less than the specified 3 years of relevant experience, training will be provided.

Job Requriements

RTO shall have diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and accredited by and registered with IES/ACES with minimum 3 years relevant experience in supervision deep excavation/ basement works.

- MRT experience will be an advantage.

- To assist RE & SRE to monitor all site activities

- Willing to work on night & rotation shifts

Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both

mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and

applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job

Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Job Responsibilities:

• Develop and implement maintenance schedules for machinery and equipment.
• Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Conduct routine inspections and preventive maintenance to optimize machinery performance and extend equipment lifespan.
• Liaise internally between operations teams to address machinery breakdowns and operational concerns.
• Coordinate data collection on auxiliary materials from operations teams and report accordingly.
• Manage receipt, maintenance, and monitoring of machinery parts inventory.
• Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.
• Undertake additional tasks as required to support operational needs and project requirements.

Job Requirements:

• Bachelor's Degree in Mechanical or Mechatronics Engineering or Equivalent.
• Preferably with at least 3 years of working experience dealing with machinery.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

JOB DESCRIPTION:

Plan, schedule, organize and co-ordinate site installation works of security and communication and related systems projects, which include;

• Planning and scheduling of site installation works;
• Monitor site installation progress of sub-contractors, prepare progress reports,
• Attend site and co-ordination meetings, and technical meetings, prepare site documentation
• Plan equipment installation schedules, and schedule system testing and interfacing works
• Reports to the Project Manager and assist in carrying out specific site related tasks.

Qualifications:

• Polytechnic Diploma/ Degree/ Master in Civil Engineering/Construction
• At least 2 years of relevant working experience
• Good team player, able to lead and multi task
• Excellent interpersonal and communication skills
• MS Office skills – Excel/Words/Powerpoint

• Expertise/ working/ practical knowledge of containerization platforms – particularly openshift
• Working/ practical knowledge of operating environments & platforms – virtual machines, Linux, Windows; databases – MariaDB. MSSQL; application/middleware/web servers – jboss, ssh, apache, tomcat, kong, nginx
• Fundamental understanding of networking – network load balancing, DNS
• Working/ practical knowledge in security – server / os hardening, ssl, network vulnerability assessments, penetration testing; component security
• Troubleshooting; technical advisory/ consultations; project status reporting; organize calls with partners
• Work in multicultural & multiracial environment
• Occasional (rare) overtime

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company
• Career Advancement
• CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess own vehicle

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Salary up to 6k+
• MNC company - stable revenue
• Transport allowances
• Own a vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC
• Own a car

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team & Resident Engineer on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To attend site, progress, variation and coordination meetings
• To coordinate with Resident Engineer with respect to C&S engineering works, architectural and M&E engineering works
• Period: 36 months
• Start from: December 2024

Requirement:

• Min Diploma in Civil Engineering, Construction Engineering, Architectural or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Summary

The Water Treatment Marketing Support Engineer will provide technical support to the marketing team, focusing on membrane filtration technologies and water treatment solutions. This role involves collaborating with sales teams, customers, and engineering departments to effectively communicate product benefits, conduct market research, and support business development initiatives.

Key Responsibilities

1. Technical Support: Provide in-depth technical knowledge of water treatment processes, particularly membrane technologies (e.g., Nano Filtration, Reverse Osmosis) to assist the marketing and sales teams.
2. System Design: Develop and optimize designs for membrane filtration systems, including Nano Filtration and Reverse Osmosis technologies.
3. Water Quality Assessment: Analyse raw water quality data to determine treatment requirements and evaluate the effectiveness of membrane technologies.
4. Membrane Selection: Evaluate and select appropriate membranes based on performance specifications and project requirements.
5. Process Optimization: Identify opportunities to enhance system efficiency and increase water recovery rates.
6. Troubleshooting: Support operational teams in diagnosing issues related to membrane fouling, scaling, and maintenance.
7. Documentation: Maintain accurate records of system performance, maintenance activities, and compliance with quality standards.
8. Customer Engagement: Engage with customers to understand their requirements and provide tailored solutions that meet their specific water treatment challenges.
9. Training and Education: Develop training materials and conduct workshops for internal teams and customers on product features, benefits, and applications.
10. Marketing Materials: Contribute to the creation of marketing collateral such as brochures, case studies, and technical papers that highlight product advantages and applications.
11. Feedback Loop: Gather customer feedback on products and services to inform future product development and marketing strategies.

Qualifications

1. Diploma, equivalent or higher, with a major in Chemical Engineering, Environmental Engineering, Water Resource Management, or a related field.
2. Knowledge of design and visualization software such as AutoCAD is a plus.
3. Experience: Minimum of 3 years of experience in water treatment processes or related fields with a focus on membrane technologies.
4. Communication Skills: Excellent verbal and written communication skills for interacting with technical teams, customers, and stakeholders.
5. Presentation Skills: Ability to present complex technical information clearly and effectively to diverse audiences.
6. Bilingual in English and Chinese is required.
7. Technical Skills:

6.1. Strong understanding of membrane filtration technologies (Nano Filtration, Reverse Osmosis).

6.2. Familiarity with water quality parameters and analytical methods.

6.3. Experience in market analysis and product positioning.

Desired Attributes

1. Strong analytical skills with a problem-solving mindset.
2. Ability to work collaboratively within cross-functional teams.
3. Proactive approach to identifying opportunities for improvement in products and processes.

Working Conditions

1. The position may require occasional travel for customer visits, trade shows, or training sessions.
2. Flexibility to work in a dynamic environment with changing priorities.
3. Salary (commensurate with experience): S$3200 – S$ 4200.
4. A part-time position is also available for application.

Application Process

1. Interested candidates should submit their resume along with a cover letter detailing their relevant experience and qualifications.
2. Interested applicants, kindly forward above required document and indicating earliest availability / notice period required, current and expected salary via email to: [email protected]

We regret that only shortlisted candidates will be notified.

Working Location: Defu Industrial City/PUB Water Exchange

· Ability to present ideas in business-friendly and user-friendly language appropriate to both executive and managerial audiences.

· Ability to effectively manage relationships with other implementation teams, application teams, stakeholders, business and customer representatives.

· Organizational skills with attention to task details, documentation and target dates.

· Strong written, oral, and interpersonal communication skills.

· Team orientated, willing to share knowledge and collaborate with peers.

· Proven analytical, strategic vision drawing on strong problem-solving abilities.

· Able to prioritize and execute tasks in a high-pressure environment. ·Ability to conduct research into server, storage, virtualization issues, standards, and products.

Requirement:

· VMWARE Cloud, Virtualization, Server and Storage vendor Certifications Preferred.

· 10+ years of previous Implementing / Architecting & virtualization experience, across multiple vendor and technologies.

· In-depth understanding of Cloud, Server, Storage, and Virtualization architecture design techniques, theories, principles, and practices.

· Solid experience in implementing enterprise Cloud, Virtualization, Server and Storage systems within a broad spectrum of technologies.

EDUCATION/CERTIFICATION / KNOWLEDGE:

· Excellent Knowledge of Private, Public and Hybrid Cloud environments

· Excellent Knowledge of Cloud Orchestration platforms

· Intermediate knowledge of Windows Server, Linux, in HA/DR type configurations.

· Excellent knowledge of Sever hardware platforms: x86

· Excellent knowledge & working experience of VMWare ESXi, vSphere, vSAN, vRA, VRO, VROPs, vRLI, NSX-T, Horizon View

· Excellent knowledge of SAN, NAS, DAS, RAID, SCSI, Fibre Channel, Backup to Disk, clustering, encryption technologies from multiple vendors.

· Should be extremely proficient in PowerShell, Shell scripting / Python / Ansible development

The resources will have the below qualifications:

• Required skills include 3+ years of experience in the implementation, maintenance and analysis of data center facilities, hardware, communications infrastructure, strategies, tools and effective troubleshooting techniques.
• Basic background on enterprise data center facilities and infrastructure environments such as PDUs, RPPs, network and SAN infrastructures. In depth knowledge on complex, Enterprise class inter-networked environments involving a combination of switched/routed/shared Ethernet, TwinAx (100GigE, 25GigE,10GigE, GigE, 100M, and 10M), token ring, SAN, and wide area connectivity.
• Strong knowledge of WAN technologies (OC-x, DS-x), subnetting and TCP/IP protocol a must.
• Knowledge of trouble ticketing systems, change control, Project processes and associated tools.
• Logical problem- solving techniques and associated experience in system, data center facilities, and telecommunications.
• Experience with project management.
• Financial Services industry knowledge a plus.

Interested candidates, please send over your resume to [email protected]

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Philips is a global leader in health technology, committed to improving billions of lives worldwide and striving to make the world healthier and more sustainable through innovation. Driven by the vision of a better tomorrow.

But it’s not just what we do, it’s who we are. We are 80,000, wonderfully unique individuals, with two things in common. An unwavering sense of purpose and a relentless determination to deliver on our customers’ needs. It’s what inspires us to create meaningful solutions – the kind that make a real difference – when it matters most.

The world and our customers’ needs are changing faster than ever before and while we are proud of what we do already, we know we can do more. That’s why we need you, to help us tackle increasingly complex challenges posed by ever evolving health and well-being needs.

In this role, you have the opportunity to make life better

Looking at the challenges the world is facing today Philips’ purpose has never been more relevant. So whatever your role, if you share our passion for helping others, you’ll be working towards creating a better and fairer future for all.

You are responsible for

MR portfolio

• Perform corrective maintenance, supported when necessary by tier-2 support helpdesk
• Demonstrate commitments to meet customer needs and requirements by ensuring all given quality standards
• Submit timely and accurate service data, job sheets, reports, expense claims, radiation film badges, field problem reports and other paperwork as assigned
• Be aware of customer needs and potential commercial leads (Philips Lifecycle Solutions – PLS) through customer visits and provide feedback and recommendations to the management, relevant people within the organization
• Support the District Customer Services & Operations Manager and the Customer Services Account Manager as appropriate with contract renewals etc.
• Use company property with care to ensure optimal results with minimal operational costs
• Keep abreast of new technologies likely to affect PH range of products
• Be a professional representative for PH with respect to customer problems, ensuring personal acceptability by the customer in appearance and behavior in accordance with PH policy and targets
• Accuracy of service records with particular attention to test & inspection results
• Adopting appropriate ESD control while servicing PH equipment
• Usage of appropriate electronic measurement equipment in calibration controlled cycle
• Responsible for reporting identified device safety issues according to applicable PH quality standard policy
• Responsible for reporting customer feedback according to applicable quality standard policy and follow up relevant assigned quality & regulatory training in a timely manner

To succeed in this role, you’ll need a customer-first attitude and the following

• Diploma/Degree in Biomedical or Electronics Engineering or equivalent
• At least 3 years of working experience in service or engineering roles, preferably in the medical device industry
• Good troubleshooting skills
• Good communication and interpersonal skills

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

• OS Expertise: Extensive experience in troubleshooting and supporting Windows 10/11 operating systems.
• Image Creation and Deployment: Experience creating, maintaining, and deploying OS Images in a large enterprise environment.
• Endpoint Management: Proficiency with endpoint management tools such as Microsoft SCCM, MDT, Intune, or similar.
• Security Practices: Strong knowledge of endpoint security best practices and implementation.
• Technical Understanding: In-depth understanding of Active Directory, Group Policies, Networking, and Endpoint Security.
• Scripting and Tools: Experience with PowerShell, command-line scripts, and SysInternals tools.

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

Position Overview: The Senior Mechanical Engineer is a highly skilled and experienced professional responsible for leading and contributing to the design, development, and implementation of mechanical systems and products. This key technical role involves overseeing complex engineering projects, providing technical expertise, and mentoring junior engineers. The Senior Mechanical Engineer plays a critical role in ensuring the successful execution of projects, adherence to engineering standards, and the delivery of high-quality mechanical solutions.

Key Responsibilities:

1. Mechanical Design and Development:

• Lead and participate in the design and development of mechanical systems, components, and products from concept to production.
• Utilize engineering principles and software tools to create detailed 3D models, simulations, and prototypes for testing and validation.

2. Technical Leadership:

• Provide technical leadership and guidance to a team of mechanical engineers, fostering a collaborative and innovative work environment.
• Mentor junior engineers, offering expertise, knowledge transfer, and professional development support.

3. Project Management:

• Take ownership of complex engineering projects, creating project plans, setting milestones, and managing resources to ensure timely completion.
• Collaborate with cross-functional teams, including electrical engineers, industrial designers, and project managers, to achieve project objectives.

4. Analysis and Testing:

• Conduct engineering analysis, simulations, and tests to evaluate mechanical systems' performance, strength, and reliability.
• Analyze test data, identify areas for improvement, and iterate on designs to achieve optimal outcomes.

5. Compliance and Standards:

• Ensure designs comply with relevant industry standards, codes, and regulations, as well as company-specific quality and safety guidelines.
• Keep abreast of changes in industry standards and incorporate them into the design process.

6. Cost Optimization:

• Work with procurement and manufacturing teams to optimize designs for cost-effective production without compromising quality or performance.
• Identify opportunities for value engineering and suggest design modifications to reduce production costs.

7. Prototyping and Manufacturing Support:

• Collaborate with prototype and manufacturing teams to oversee the transition from design to production, resolving manufacturing challenges.
• Support the manufacturing process by addressing design-related issues and providing design documentation.

8. Continuous Improvement:

• Continuously improve engineering processes, methodologies, and best practices to enhance the efficiency and effectiveness of the engineering team.
• Stay updated with advancements in mechanical engineering and related technologies to drive innovation.

Qualifications and Requirements:

• Bachelor's or Master's degree in Mechanical Engineering or a related field.
• Proven experience as a Mechanical Engineer with several years of progressively responsible roles and demonstrated achievements in design and development.
• Proficiency in computer-aided design (CAD) software and other engineering analysis tools (e.g., FEA, CFD).
• In-depth knowledge of mechanical engineering principles, materials, and manufacturing processes.
• Strong problem-solving skills and the ability to troubleshoot complex mechanical issues.
• Experience leading and mentoring engineering teams, with strong leadership and communication abilities.
• Familiarity with project management methodologies and the ability to manage multiple projects simultaneously.
• Excellent analytical and critical thinking skills to assess designs and make data-driven decisions.
• Familiarity with relevant industry standards and regulations.
• Adaptability and a continuous learning mindset to keep up with emerging technologies and advancements in the field.

Note: The specific responsibilities and requirements for a Senior Mechanical Engineer may vary depending on the industry and the nature of the company's products. This job description serves as a general outline of the role's typical responsibilities.