• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Tuas Naval Base

The Job:

• Planning, engineering, and executing maintenance of LPG Tanker and Chemical Tankers
• Monitor the performance of the vessel and crews to ensure compliance with safety regulations

Requirements:

• Ship Engineer of Class 1 COC or Class 2 COC with 2-3 years of sailing experience onboard an LPG / Chemical Vesesl.
• Working experience in a Shipyard and Ship Management Company will be an advantage
• Good knowledge of I.S.M code, Class, and Regulatory matters.
• Team player with a strong sense of responsibility, initiative, and willingness to travel

Please include the following when submitting your application via email to [email protected] :

• Detail resume with sea service record
• Earliest availability date
• Status in Singapore

We regret that only shortlisted candidates will be notified by Email

By applying for this role, you consent to ENEOS Ocean Shipmanagement Pte Ltd collecting and using your submitted personal information to process your application.

Primary Responsibilities (2 vessels)

· Technical management of the assigned Multipurpose Heavy Lift vessels including drydocking.

· Methodical and systematic review of Daily, Weekly, and Monthly Reports to ensure proper technical running of vessels and identification of risks.

· Management of ‘Defect Lists’ aligned with ‘Requisition Trackers’ to have full control on vessel’s condition (Deck & Engine) including raising of new defects and closure of existing defects.

· Management of Inventory Management System (IMS) with Purchase department as a running system always updated for supply & consumption of relevant items ensuring all unusable spares / stores / deck materials are discarded/ disposed in line with disposal regulations keeping vessels clean of unusable items.

· Full management of Planned Maintenance System (PMS) with vessels to have full control on vessel’s condition (Deck and Engine), checking authenticity of tasks completed and adherence to PMS schedules.

· Management of shore-based requirements in accordance with ‘Defect Lists’ and to maintain a record of all Shore Service Reports for services carried out on vessels.

· Carry out sailing visits / vessel inspections to ensure accuracy of Defect List and raising new defects, quality of closed defects, IMS, PMS, Accommodation upkeep, HSE and SMS. Identify competency of engineers and officers during the visits. Prepare Inspection reports capturing the status of the vessel after the visit.

· Carry out technical interviews / evaluations for all engineers in the fleet ensuring the right quality and experience. Carry out briefings for sea staff visiting the office to ensure their familiarity with the company procedures, ongoing initiatives, and accidents / learnings from the fleet. Carry out sea staff evaluations during all interactions with the vessel and feedback to crewing department.

· Liaise with Class for arranging annual and periodical surveys.

· Liaise with makers as required on troubleshooting technical problems & advising vessels accordingly.

· Liaise with HSE / Crewing / Accounts Department for smooth operation of vessels.

Requirements

· Shore experience as Technical Superintendent minimum 3 years with extensive experience in working with 4 stroke Engines. All vessels have 4 stroke Main Engines and hence extensive experience of working with 4 stroke Main Engines is essential.

· Experience with heavy lift vessels preferable.

· Sailing experience as Chief Engineer of minimum 3 years on board foreign going vessels

· Diligent, self-starter, independent and result oriented individual with excellent oral and written communication skills

· Proficient in Microsoft Office applications and general computer knowledge, attentive to detail.

This role comes with good base salary and attractive bonuses depending on sales performance.

Job Responsibilities

• Provide pre-sales support for a range of CCTV and network technical solutions, including proposal development and technical presentations
• Identify and develop business opportunities with clients, promoting solutions and delivering tailored technical proposals
• Design and deliver competitive product solutions, ensuring alignment with client requirements
• Collaborate with the sales team to ensure client needs are met, and provide technical expertise to drive sales growth
• Build strong relationships with clients, understanding their business and technical needs, and providing timely support for inquiries and technical issues
• Deliver product training to clients, enhancing their understanding and adoption of CCTV and network solutions

Job Requirements

• Proven experience with CCTV products and solutions
• At least 1 year of experience in the CCTV or networking domain
• Excellent communication and influencing skills, with the ability to negotiate and align technical solutions with customer needs
• Strong technical troubleshooting skills, with experience in resolving complex technical issues
• Preferred certifications: CCNA, CCNP, or other relevant networking credentials

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R1332294

Business Registration Number: 201735941W

Licence Number: 18S9037

Job Description:

• Quotation and Tender Preparation: Prepare accurate and detailed quotations for clients, ensuring alignment with project specifications, costs, and timelines.
• Tender Submission: Prepare and submit tender documents for projects, ensuring all requirements are met and deadlines are adhered to.
• Cost Estimation: Analyze project details to estimate costs for materials, labor, and other resources, ensuring competitiveness and accuracy.
• Vendor and Supplier Coordination: Work with suppliers and subcontractors to gather necessary pricing and technical details for tenders.
• Technical Support: Provide technical assistance in reviewing and responding to project inquiries, ensuring the right solutions are proposed.
• Documentation and Record-Keeping: Maintain accurate records of quotations, tenders, and all related correspondence.
• Follow-up and Feedback: Follow up with clients post-submission to address any questions or revisions needed.

The Role:

Dow Jones is looking for a Technical Analyst to be part of the global Automation & Reporting team. The team uses SQL, Python, JavaScript and more to build solutions and robust reporting capabilities to help our partners manage and analyze high volumes of articles and data points across the Dow Jones products.

As a Technical Analyst within the team you will partner with multiple business teams to report on the databases they own and design innovative solutions to automate their business processes. You will work on multiple deliverables in parallel, be comfortable eliciting reporting requirements and translating these into solutions, prioritizing and communicating progress and blockers in an effective manner. You will report to the Director, Automation & Reporting.

You Will:

• Design, develop and maintain optimized solutions that meet reporting or process improvement needs.
• Manage a portfolio of solutions, work with multiple stakeholders and communicate progress and blockers with the project team and sponsors.
• Design and own reporting processes that are business centric and will improve the operational efficiency.
• Identify high impact business problems and elicit requirements for solution development.
• Write clean and readable code and optimized SQL queries.
• Develop ETL (Extract, Transform, Load) jobs, visualization dashboards and tools that support processes.
• Adopt existing best practices or contribute to improving them, including solution design, development, validation and documentation practices.
• Work on ad hoc and urgent requests

You Have

Essential Qualifications:

• Undergraduate degree, preferably in a quantitative field such as Computer Science, Data Science, Statistics, Mathematics, or related disciplines, or equivalent combination of training and 3+ years of experience in SQL and Python with applications for data analysis and data processing.
• Excellent communication skills, being able to communicate technical information clearly to both technical and non-technical audiences
• Self starter able to work independently, coordinate with multiple partners and complete projects start to finish
• Detail oriented with focus on assuring quality, consistency and accuracy in data and processes
• Experience in working with version control systems like Git.
• Experience in delivery through agile practices
• An openness to different views and opinions and an appreciation for team diversity

Preferred Qualifications:

• Experience in ETL development.
• Experience working with large datasets in a fast-paced and fluid environment with the ability to understand and solve complex non-routine problems.
• Experience in working with Google APIs.
• Experience in using AI tools (Copilot, ChatGPT).
• Proficiency in data visualization and dashboard building.
• Experience with cloud services (AWS, GCP) including S3, Athena, Glue.
• Knowledge in Data Science and predictive modeling.
• Knowledge of other programming languages (JavaScript).

Job Responsibilities:

• Operate, maintain, and repair central chiller plant equipment, including chillers, cooling towers, pumps, and related components.
• Carry out preventive maintenance of properties and attend to all work orders issued by tenants and management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• Maintain and monitor building systems
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to plumbing, sanitary installations, fire sprinkler, alarm systems, lifts and escalators etc

Key Requirements:

• Minimum 5-7 years of related building maintenance experience
• Skilled in Building Works, M&E, Air-Con and/or Electrical
• Independent, proactive and responsible team player
• Flexibility to work shift hours
• Effective communication skills to work collaboratively within a team and communicate with tenants and management.

Job Summary :

We are seeking a highly skilled Project Manager to lead the overall engagement.

The ideal candidate will have expertise in managing end-to-end delivery of atleast 2-3 applications, good client communication skills, stakeholder management ability.

Have good technical knowledge in Pega with the ability to take Architectural decisions and solutioning. Additionally, domain experience in Airlines is good to have.

The candidate will play a crucial role in driving techno-functional excellence and ensuring successful project delivery.

Required Skills :

• Pega Case Management ,Pega Cloud ,Pega Integration ,Pega Platform, Project Management, Cloud deployment.

Roles & Responsibilities :

• Managing the overall project delivery and ensure delivery schedule is adhered
• Prepare delivery schedule, effort and cost based on the client requirements and provide walkthrough o client on the same
• Project Manager will be liable to achieve client sign-off on schedule, effort and cost presented
• Providing weekly status reports to stakeholders
• Ensuring that the project is timely by setting time marks
• Facilitates daily scrum, sprint planning, sprint demo and retrospective meetings.
• Tracks and manages product backlog, burn-down metrics, velocity, and task break-down
• Helps product owner to make the product backlogs in good shape and make them ready for the next sprint
• Responsible to provide architectural solutions and do hands on with the team members to deliver technical requirement in Pega.

Qualifications:

• A solid understanding of project end-to-end delivery
• Excellent verbal, written and presentation skills
• ·Ladership skills
• Ability to motivate IT staff
• Logical problem solver who can operate under constraints
• Strong organisational skills
• Ability to juggle multiple tasks

Certification(s) Required :

• CSSA, PMP, Scrum Master, Good to have CLSA

Ackcio Pte Ltd builds reliable wireless monitoring solutions for industrial applications. Our Ackcio Beam suite of products runs off our core technology, a long-range, low-power radio wireless mesh communication to reliably transmit industrial sensor data in real-time both underground and above ground. Currently our technology is widely used in construction, mining, infrastructure, and rail industries to automate the monitoring process, improve productivity, and make the activity safe. We now help major clients in 45 countries across 6 continents monitor their projects with our technology.

Ackcio was incorporated in Singapore in 2016, and has drawn investments from prominent investors including Wavemaker Partners, Enterprise Singapore, Accelerasia, Aletra Capital Partners, Foundamental, and EF.

Responsibilities

• Be the go-to person for clients, helping them get the most out of our products.
• When customers run into challenges, you’ll work with them to come up with easy, clear solutions.
• Suggest ways to improve user experience and get more people using our products.
• Guide clients on the best ways to use our products and how they can get the most value.
• Look for ways to help customers expand how they use our product and offer them more value.
• Share customer feedback and ideas for improvement with the rest of the team.
• Share your product expertise in customer interactions to help them succeed.
• Communicate with customers via email, and phone to help them get the hang of our products.
• Provide ongoing support to ensure customers continue to succeed with our solutions.
• Represent customer needs and issues to make sure they’re heard across the company.

Requirements

• A background in technology, computer science, or IT/networking.
• Fluent in English; additional languages are a plus.
• Willing to travel for customer site visits with on-site troubleshooting work if required.
• Excellent communication skills and a friendly attitude.
• Strong problem-solving abilities and quick to learn.
• Ability to handle multiple tasks and meet deadlines.
• A self-starter, both independent and team-oriented.
• Proven track record in customer support and problem resolution.
• Passionate about helping customers succeed.

Monitors and controls the safe and cost efficient technical operation of all assigned vessels using the available resources, within the defined parameters of cost, commercial viability and operational excellence in line with Owners expectations. Ensure environmental compliance policies are upheld.

Ship technical support

• Understands the contractual agreements with customers to be able to deliver the same with regards to the ship management services for each assigned vessel, in a safe and cost efficient manner.

• Monitors the effective operation of the equipment and machineries of the assigned vessels, identifying potential discrepancies from operational standards and proposes and/or implements solutions that will enhance the efficiency, performance and safety of the vessels.

• Participates in the development of the maintenance and repairs plan for the assigned vessels and monitors its accurate execution in order to identify compliance of operations according to time schedule, quality of deliverables and budget.

• Projects the requirements in maintenance and repairs activities, spare parts and technical training of the assigned vessels in order to provide valuable information for the development of the budget and maintenance plan of the vessels. Upon approval, follows-up its accurate execution, identifying, reporting and providing solutions in potential discrepancies.

• Monitors all vessels trading certificates to ensure compliance with existing maritime legislation, safety regulations and operational standard requirements of all regulatory bodies.

• Oversees and monitors the overall technical operation of the assigned vessels, ensures the timely and accurate completion of dry-docking on budget and of other relevant shipboard maintenance and repair activities, in order to support the operational effectiveness of vessels and increase customer’s satisfaction and commitment.

Execution of technical inspections

• Manages all vessel visits, audits and inspections effectively right from planning

Education and Qualifications:

• B.S. degree in Mechanical, Electrical or Marine Engineering, Naval Architecture or equivalent, or

• Chief Engineer’s qualification.

Work Experience:

• 5 years of sailing experience as Senior Officer, or

• 5 years of shore experience as a technical superintendent with a ship management/owning company, or

• 5 year of combined experience of the above positions.

Job-Specific Skills:

• Strong knowledge of bulk vessels’ technical requirements and voyage regulations

• Excellent project management skills

• Very good negotiation skills

• Very good people management skills

• Team work and cooperation

• Very good organisational skills

• Worldwide operations require fluency of the English and Chinese language

• Willing to travel or relocate

We invite highly motivated, dynamic professionals to join our growing Experience & Change practice. As customer experience rises in importance, customer outcomes are pivotal to key business decisions in order to achieve sustainable growth in today’s dynamic market. The Experience & Change team helps our clients across industries extend their relationship, capture and grow the value of their customers.

We provide them with the insights needed to help them meet their strategic and financial goals through:

• Rapidly driving growth and creating customer value
• Transforming the customer experiences that add most value to the organisation
• Making transformation and business decisions based on what customers value

Successful candidates will play a significant role in working on client engagements spanning customer strategy, customer experience design, service and sales transformation, and customer-centric operational improvement.

Roles & Responsibilities

• Provide expert guidance on technical aspects of Salesforce implementation, leveraging deep understanding of Salesforce platform capabilities and limitations for Pre-Sales and Project Delivery
• Conduct thorough analysis of business requirements and recommend solutions that align with Salesforce best practices, ensuring scalability, maintainability, and compliance with industry standards
• Collaborate with internal and external stakeholders, including business analysts and project managers, to ensure that the Salesforce solution meets business objectives and regulatory requirements
• Act as a liaison between business stakeholders and technical teams, translating business needs into technical requirements and vice versa, facilitating effective communication and understanding
• Provide strategic direction and thought leadership, advising on emerging technologies, industry trends, and innovative solutions to enhance the Salesforce implementation and drive business value
• Design the overall Salesforce architecture, including data model, application design, security model, and integration strategy, ensuring alignment with business goals and scalability requirements
• Lead technical discussions and decisions, providing guidance to development teams on architectural choices, platform limitations, and optimization techniques, fostering a culture of technical excellence
• Collaborate closely with stakeholders to gather and prioritize requirements, ensuring that the technical solution meets functional and non-functional requirements, and aligns with the enterprise roadmap

Skills & Qualifications

• Bachelor’s degree in computer science, Information Technology, engineering or equivalent
• Minimum 8-9 years of experience in delivering Salesforce projects
• Multiple relevant Salesforce certifications
• Extensive experience in Salesforce architecture and design
• Strong knowledge of integration patterns and best practices
• Excellent problem-solving and decision-making skills
• Prior experience within the public sector and real estate industry would be advantageous
• Implementation of multiple complex projects in Singapore or ASEAN countries
• Proficiency in multiple CRM applications
• Ability to translate requirements into design and managing implementation
• Strong project management, communication, written, analytical, organisational and problem-solving skills
• Ability to assess the practical aspects of business operations

Only shortlisted candidates will be contacted by KPMG Talent Acquisition team, personal data collected will be used for recruitment purposes only.

At KPMG in Singapore we are committed to creating a diverse and inclusive workplace. We believe that diversity of thought, background and experience strengthens relationships and delivers meaningful benefits to our people, our clients and communities. As an equal opportunity employer, all qualified applicants will receive consideration for employment regardless of age, race, gender identity or expression, colour, marital status, religion, sexual orientation, disability, or other non-merit factors. We celebrate the different talents that our people bring and support every staff member in their journey to achieve personal and professional growth. One of the ways we do this is through Take Charge: Flexi-work, our flexible working framework which enables agile and innovative teams to help deliver our business goals.

Responsibilities

• On-site Supervision of the following areas: Architectural;
• Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings;
• Highlight discrepancies, feedback site progress, safety and non-conformances to Consultants / Employer;
• Assist the Resident Engineer in carrying out supervision works on site and also assist in supervising & co-ordination with other consultants’ site staff;
• Carry out administrative works and other duties as required by QP / Consultant / Employer;
• Quality control of all civil, structural and architectural works such as inspecting materials and workmanship and performing tests to check the quality of materials;
• Assist in the review of contractor's method statements and working procedures and ensure that contractor proceeds in accordance to approved method statement;
• Keep, maintain and submit daily site record on progress of works, instructions given to Contractors, materials delivered to site, daily activities and weather conditions at site, number and visitors at site and any other significant information;
• Attend site/coordination meetings as directed;
• Prepare defects snagging list, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified;
• To ensure all the contractor’s works are in statutory compliance; *Provide full-time supervision of structural works in large building works

Requirements

• Minimum 5 years of site experience in the supervision of various types of developments;
• Must be accredited with the IES-ACES Joint Accreditation Committee (JAC);
• Prior experience in precast construction and architectural finishes;
• Able to work overtime when required by schedule.

Job Description:

At least 2 years of hands-on experience in data center infrastructure, network hardware, and communications systems implementation and maintenance.

Knowledge of data center environments, including PDUs, RPPs, SANs, and network infrastructures.

Understanding of complex inter-networked environments, such as Ethernet, TwinAx (100GigE, 25GigE, 10Gig, 100M etc) token ring, and WAN technologies (OC-x, DS-x).

Familiarity with TCP/IP protocols, subnetting, and WAN technologies.

Strong analytical and troubleshooting skills to identify and resolve system and network-related issues.

Excellent written and verbal communication skills to interact with vendors, team members, and stakeholders.

Experience in managing or coordinating technical infrastructure projects is an advantage.

While not required, familiarity with the Financial Services industry is a plus.

Roles and Responsibilities:

Hardware & Network Installations: Perform installation, de-installation, relocation, and testing of network hardware (routers, switches, firewalls, encryptors) and systems within the data center. Ensure that all installations meet the required service-level standards.

Carrier Circuit Management: Install, relocate, and test carrier circuits to ensure network connectivity across various hardware.

Cabling & Infrastructure Management: Manage the installation, relocation, and testing of patch cabling for systems and network hardware, maintaining organized and effective cabling practices.

Vendor Coordination: Collaborate with facilities, electrical, and communications vendors to facilitate the installation of infrastructure elements such as power circuits, cabinets, and network components.

Network & SAN Infrastructure Support: Assist in coordinating the installation and management of network configurations and SAN cabling, ensuring that performance and reliability standards are met.

Consumables Management: Oversee the management of critical consumables (cables, labels, rail kits, etc.) to ensure efficient day-to-day operations.

Work-Life Balance: This role will be 12Hour Rotating shift from Thursday to Sunday. 3days off to rest/ recharge.

Career Development: Gain invaluable experience in managing enterprise-level data center operations and network infrastructure.

Our client is a US established MNC company, world-class developer, manufacturer, and marketer of lubricant and fuel additives and chemicals designed to help enhance the performance of all types of transportation and industrial equipment.


Duration: 12 months
Working Hours: 5 days - Mondays to Fridays, 7:45am to 4:45pm
Working Location: Jurong Island (Company transport provided - Paya Lebar, Bishan, Yew Tee, Jurong East & Boon Lay)

Roles and Responsibilities:

• Organize material through Operations Trainers and complete technical writing assignment (Operating Manual and Procedures) with focus on order, clarity, conciseness, style, and terminology.
• Coordinate with Operations Trainers and other stakeholders to establish technical content and update relevant document through Operations Trainer guidance
• Edit, standardize, or make changes to document material as instructed by Operations Trainers
• Support Operations Trainer in the draft, review, validate, approval and publishing documents through SharePoint workflow and other Procedure databases
• Execute Document Review process through Operations Trainer guidance - Publish materials (Available in SharePoint) and execute revisions or changes in scope, format, and content according to Electronic Operating Manuals (EOM) Standards and Procedure Standards.
• Maintain records, files of work and revisions of all documents in Procedure databases
• Need to work with photographs, drawings, sketches, diagrams, and charts to illustrate material.
• Draw sketches using Microsoft Visio to illustrate specified materials or valve line-up sequence.
• Administrative and Logistics coordination support in terms of L&D work processes

Requirements:

• 3 years or more experience in a Technical Writer role or Ability to prove Technical Writing skills in Oil and Gas industry sector
• Diploma / Degree in Chemical Process, Communication or English. In lieu of degree, prior experience in Oil and Gas Industry sector in a technical writing capacity
• Strong writing skills. Strong communication and organization skills
• Strong MS Word knowledge and proficiency in MS Outlook. Proficient in other MS application (Excel, Power BI, Visio) preferred

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Job Summary

The Partner Technical Lead (PTL) role is an integral member of NetApp’s partner sales team as the primary technical resource for assigned partners. In this role, the PTL is responsible for driving growth for NetApp partners through product evangelization, education on products, tools and selling strategies and hands on facilitation of partner opportunities.

Additionally, the PTL acts as the technical liaison between the partner and NetApp sales, support and engineering.

You will be responsible to foster a community of highly skilled and engaged partners who advocate for NetApp solutions and drive business growth in your assigned region.

Essential Functions

The overall responsibilities of Partner Technical Lead are to provide technical leadership and serve as the primary technical point of contact for partners. You will be responsible for driving excitement and interest in NetApp solutions and technologies, provide advanced technical guidance and support to partners, develop and deliver technical training sessions and workshops to partners.

Specific areas of responsibility include:

• Understanding current technical capabilities and developing strategies to ensure pre- and post-sale technical competency for NetApp solutions and tools needed to support the partner’s business plan and growth objectives.
• Build strong, trusted advisor relationships with key people like the technology leaders and principals at top partners and alliances.
• In collaboration with the Partner Business Manager, and other members of the partner team, construct a business plan and technical sales, support and enablement strategy (Technical Account Plan) that will address both the Partner needs and NetApp’s account strategy.
• Work closely with internal teams (e.g., sales, presales, product management, engineering) to provide feedback from partners and influence product development.

Requirements

• Deep understanding of the company's products and technologies.
• Create and curate compelling and interesting content around the NetApp Portfolio with a ‘partner lens’ helping them to identify how our products and strategy will make their business successful.
• Strong background in relevant technical fields (e.g., cloud computing, networking, storage solutions)
• Assist with the ongoing improvement and evolution of partner programs.
• Identify and influence the improvement of key channel business processes across NetApp.
• Proven track record of successfully supporting and enabling partners.
• Excellent verbal and written communication skills.
• Ability to clearly convey complex technical concepts to both technical and non-technical audiences.
• Ability to work effectively in a cross-functional team environment.
• Strong interpersonal skills and the ability to build and maintain relationships with partners.
• Drive overall channel PTL program consistency, teaming, and integration of all PTL activities when applicable.
• Provide continuous learning opportunities through workshops, certifications, and hands-on labs.
• Identify areas for improvement and work with partners to enhance their technical capabilities and performance
• Ensure partners achieve and maintain the relevant certifications
• Facilitate communication between partners and internal stakeholders to ensure alignment and address any concerns.
• Responsible for Partner advocacy to build a strong NetApp Champion Community across ASEAN.
• Organize regular community events, webinars, and meetups to foster collaboration and knowledge sharing among champions.

Education and Experience

• A minimum of 12 years of experience in customer facing organizations within IT industry or equivalent
• A Bachelor of Sciences Degree in Electrical Engineering, Computer Science; or related field is required
• Experience working with partnerships (e.g. VAR/VAD, System Integrators, Technology Partners) preferred
• Successful experience in building long term personal relationships with senior level Partners.
• NetApp technical skills preferred.
• Specialized knowledge in infrastructure including virtualization & server/network/storage. Knowledge and experience in Cloud Technologies preferred.

The ideal candidate will be responsible for driving the company's key performance indicators by delivering an exceptional user experience. In order to do this, the candidate will develop, strengthen and lead an effective technical service team, ensuring and maintaining high quality of standards.

Responsibilities

• Drives sustainable annual growth of service business.
• Supports field service engineers in resolving technical issues, workflow enhancement and career growth.
• Improves quality of service operations and delivery.
• Supervises service jobs, monitors service contract take-up rate, analyzes market trends and customer feedback to make strategic decisions.
• Enforces service team's faithful adherence to quality protocols, observance of local and international regulations.

Daily operations include:

• Builds positive team engagement to align with corporate objectives.
• Identifies and assigns team members for upskilling or other skill developments which are required in the jobs.
• Assists scheduling and job assignments to engineers, ensuring optimized deployment of resources according to each month's requirements.
• Highlights significant technical issues for the attention of the management.
• Motivates service team members to encourage customers to sign up for service contracts.
• Prepares and submits monthly reports for revenue, operations and technical matters to the management.

Requirements

• At least a bachelor's degree in engineering / chemistry / science.
• At least 2 years of experience in leadership/manager roles with direct subordinates. Familiar with performance appraisal and evaluation for promotion.
• Good hands-on attitude with track record in positive customer feedback.
• Good at managing team dynamics and operational challenges, able to resolve issues without escalation.
• Good verbal and written communication skills in situational reporting in English.
• Able to perform data analysis using Excel Pivot / Power BI to make strategic decisions.
• Possesses a logical thinking approach to analyze technical issues, be proactive and diligent in resolving challenges.
• Embraces (KAIZEN) philosophy with a strong desire to always improve work processes and decisive in execution.

We regret that only shortlisted candidates will be contacted.

Summary of the role

As a Technical Consulting Analyst, you will manage customer relationships, communicate complex Revenue Management and Dynamic Pricing concepts, and ensure customer satisfaction by solving problems and maintaining trust. You will develop business acumen in airline practices, train customers on best practices, and analyze data to provide insightful reports. Additionally, you will identify upsell opportunities, participate in pre-sales engagements, and contribute to internal and team growth by networking.

In this role you’ll / Your main responsibilities:

• Manage and deliver activities related to Revenue Management and Dynamic Pricing.
• Communicate complex concepts to various audiences.
• Anticipate and eliminate any roadblock to customer satisfaction and business adoption, identify and mitigate with your customer any risk on the project delivery, scope or timeline, articulate and justify accordingly the relevant alternatives and remedies.
• Maintain customer trust.
• Understand airline business practices and our capabilities, identify and implement best practices.
• Train customers on best practices.
• Understand and explain the methodology used in our solutions.
• Analyze and present large datasets to customers.
• Develop business adoption roadmaps.
• Identify upsell opportunities.
• Participate in pre-sales engagements.

About the ideal candidate

• Master’s or university degree in business management, engineering, or operations research.
• Experience in the airline industry (preferably in revenue management, pricing, network planning, or sales and marketing).
• Experience in information technology (preferably in travel and tourism).
• Skills in data science and visualization, and operations research.
• Curious and eager to learn.
• Passionate about the airline industry.
• Customer-centric.
• Accountable and results-driven.
• Flexible, open to changes, and proactive.

We are looking for a few Technical Leads to work on a banking project.

Job Description & Requirements

Responsibilities:

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options, and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree and 10-15 years of technical experience within architecture development, integration of backend systems and development. Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Micro services, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.

Argyll Scott Consulting Pte Ltd

Job Responsibilities

1. Supervises all technical aspects / performance of assigned vessels' operation including maintenance, repair, safety and environmental protection to ensure that these are carried out in a flawless, efficient, competitive and customer focused operation and according to the international and flag state legislation and to initiate corrective actions when such performance is not compliant with the Company's standards. Collects all necessary information in order to timely compile the dry-docking and major repair specification and participates in the planning and monitoring of major repairs and/or dry-docking repairs and services.

2. Drafts and controls fleet's technical annual budget (e.g., spares, stores, lubricants) in order to develop and implement competitive budgets and maintain the commercial competitiveness of the fleet.

3. Monitors the superintendent engineers' visits on the vessels in order to check and evaluate their condition and maintenance progress; to issue further instructions on maintenance and repair activities; to file, record and report findings to the Technical Director.

4. Reviews and evaluates quotations for all technical spares, supplies, repair services, lubricants, paints, and engine stores to be purchased and authorizes the purchase order depending on the costs.

5. Cooperates closely with the claims department for the process of damage claims and collect all necessary technical information in order to provide technical back-up in support of such claims.

6. Informs immediately the Technical Director in case of emergency.

7. Coordinates and liaises with other departments within the company to collectively provide an efficient ship management service. More specifically, assists the Insurance Dept. on collection of necessary documentation; interacts with the Purchasing Dept. for procurement cycle follow up, spares, supplies and services in coordination with the vessels; coordinates with MSQ Dept. and the DPAs to ensure that assigned vessel are in full compliance with company's SMS (:e.g., certificates, NCRs, documents etc.); works with Crew Dept. and contributes to the recruitment, training and appraisals of the seafarers employed by the company; and cooperates with other superintendents (i.e., marine) and/or fleet operators to safeguard fleet's and company's best interest and achieve optimum vessels' performance.

8. If needed, visit the managed vessels to assess their condition during PSC and/or attends dry-dock and repairs in order to monitor their progress and ensure their effective completion.

About the role

McConnell Dowell seeks an experienced RTO for one of our major infrastructure projects in Singapore.

Key Responsibilities

• Inspection and supervision of Archi work, including but not limited to ALC wall & drywall, off-site precast toilet units, off-site precast façade panels factory, epoxy flooring, vinyl flooring, carpet flooring, plastering, painting, raised floor system, ceiling, screeding, tiling, waterproofing, room handover, defects, auto-door testing, lift interior, & resolving conflicts between Architectural, Structural & M&E works.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

About You

To be considered for this role, you will have;

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.
• Able to work alt sat work week.

If you are interested in adding value and contributing success to building a key infrastructure project, we encourage you to apply for this exciting opportunity with McConnell Dowell.

About Us

McConnell Dowell – Creative Construction

Our purpose is Providing a Better Life. We do that through delivering projects that connect, support and sustain communities, and through providing career opportunities that challenge, reward and grow our people.

From remote major resources and energy projects to city-shaping transport and water infrastructure, we have constructed thousands of high-quality, complex projects for our customers and communities over more than 60 years, in Australia, New Zealand, the Pacific Islands and Southeast Asia.

Why join us?

The work you’ll do will have a tangible positive impact on people’s lives, including yours. The diversity of our projects, roles and locations means greater development opportunities. We invest in our people to set and reach personal and professional goals and we have some of the best mentoring minds in the business to help you do that. Because when you grow, we all grow.

McConnell Dowell actively seeks and celebrates diversity, inclusion, and individuality. In a culture low on ego and high on support, we encourage everyone to make an impact. We're big enough to take on community-shaping projects, but agile enough for you to have an influence on how we do things.

So, join us, be you, and help us create better together. Apply now!

This role is being sourced through McConnell Dowell directly and not accepting applications via external recruitment agencies.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 11 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

Responsibilities:

• Manage and control revisions of all documentation to ensure consistency of AEDAS deliverables as defined by the Team leader.
• Responsible for specific areas of the design and project development. where required by the project leader
• Assist in the process of coordination with external design teams, organizations or companies, managing its digital related aspects as directed.
• Prepare, develop and edit, under the guidance of the project leader or nominated architect, Sketches, Drawings, Models, Images, Specifications and other documents relating to a project or competition.
• Assist Architects / Designers & Project Leaders in controlling change i.e. Preparation of RVO’s and historical records reflecting change.
• Understand project statutory submissions and controls and to ensure comprehensive compliance documents are prepared as directed.
• Manage the CORENET interface for all submissions work.
• Understand and be familiar with the Singapore BIM standards and guides.

Requirements & Attributes:

• Diploma or Technical Certificate in Architecture/Building Construction
• Minimum 5 years relevant experience in architectural draughtsmanship and technical coordination;
• Proficient with the latest versions of AutoCAD, project information databases and specification writing;
• Experience in BIM and Revit will be an advantage;
• Construction drawings skills;
• Familiar with Singapore standards and e-submissions;
• Familiar with Singapore statutory requirements;
• Self motivated, organized and enthusiastic.

Job Title: Marine Technical Engineer (ID8359)
Location: Bukit Batok, Singapore
Must have technical and operations knowledge on marine vessel operations & maintenance
Salary: $3400 - $5000

Job Description:
- Managing and Overseeing daily vessel operations, including movements, documents and risk management.
- Ensuring compliance for Port state.
- Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
- Tracking and reviewing of approved purchase requisition for all vessel.
- Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
- Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
- Improving ship efficiency and reduce operational risk
- Engaging and deploying sea staff for vessel assignments.
- Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirement:
- Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
- Knowledge of international maritime regulations and environmental standards.
- Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
- Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
- Proficient in English (Spoken and Written) & Microsoft Office.
- Team player and able to work within time constraints.
- Strong sense of integrity and professionalism.

• Position Title: Sales Engineer
• Location: Woodlands Horizon
• Working Days: Mon - Fri, 5 days
• Working Hours: 9am – 6.00pm
• Salary: $2,400 + Comms

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities & Duties :

• Service knowledge including pricing, cost and profitability, market acceptance, channel, and competitive dynamics.
• Offer technical support and expertise advice to customers
• Increase sales primarily through direct contact or/and new/existing channel partners.
• Regularly monitors and reports on Key Performance Indicators (KPIs).
• Other duties may be assigned.

Professional Qualifications

• Diploma mechanical/Chemical Engineering with field experience is preferred.
• 1 to 3years relevant experience in handling sales
• Proficient with Microsoft Office & One Drive.