• Guide and oversee a team of technical professionals, including project and system engineers, to deliver project management, system commissioning, technical support, and pre-sales services. The aim is to meet customer requirements and fulfill the company's objectives.
• Set up clear communication within the team. Keep everyone informed about project updates, organizational changes, and other important information.
• Evaluate performance, establish goals, and offer feedback to team members to boost their performance and promote career development.

Requirements:

• Degree in Electronics Engineering or equivalent.
• At least 5 years of supervising a group of engineers experience in Security Industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic , other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will commensurate with skill and experience

5 days work week

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

RF Engineer

Location: Singapore

Nature of Job: Field + Office

Duration: 1 Year Extendable

Required Skills:

• Knowledge of Radio frequency and telecom basics.
• RF Survey Skills
• LOS Survey Skills
• Drive Testing/walk testing Skills using Tems/Nemo laptop based and handheld solution.
• Log File analysis and DT report preparation using post processing tools like Tems discovery,
• Nemo Analyzer or Actix.
• Basic Cell parameter Knowledge.
• Prior experience of 4G/5G Network Drive testing and walk testing must.

Job Description:

• Qualified candidate will be doing Drive test, walk test of a Singapore Telecom Network for
• single site verification, cluster/site optimization, feature testing and various other purposes when needed. Candidate will have to export log files and create report for the same.
• Candidate should be flexible to work 24*7

Company Reg No.: 201131609D, Licence No.: 11C4684, Reg No: R1655133, Ashraf Ali

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

The Innovation Labs team is responsible for exploring new technology areas and related opportunities, proposing new ideas and translating new ideas all the way to production.

A week in the life of an R&D Software Engineer:

• In this role, the Software Engineer will be working together with a team developing proof of concept (POC) solutions of new ideas.
• The role is suitable for developers, who are comfortable with either front-end or back-end coding languages, development frameworks and third-party libraries. Knowledge on cloud platforms such as Azure, AWS and GCP will be a plus.
• The Software Engineer must be able to work together with agile teams located at different geographical location.

Requirements:

• Bachelor/Master’s Degree in Computer Science or equivalent with minimum 5 years of relevant experience.
• Strong proficiency in one or more programming languages such as JavaScript / Go / Rust / C++ and frameworks such as Node.js / Flutter.
• Strong OO design and analytical skills.
• Experienced with prototyping software solutions involving client-server projects.
• Knowledge of software security and cryptography is an advantage.
• Good working knowledge of version control tools, continuous integration/delivery (CI/CD)
• Unit/function/system testing experience.
• Experience with Agile methodology is preferred.

Responsibilities

· Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc

· Once the plant is in operations, carryout routine maintenance activities

· Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.

· Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives

· Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.

· Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.

· Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.

· Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.

· Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.

· Plan and execute preventive and corrective maintenance works for plant turnaround.

· Perform strategy planning for control system expansion, upgrading and renewal.

Requirements

· Degree in Electronics/Electrical Engineering, major in control and instrumentation is preferred.

· Minimum 5 years of experience working and maintaining process control systems, especially Honeywell DCS, Siemens PCS7 and Triconex PLC. Familiar with the engineering tools and programming languages of these systems.

· 3-5 years working experience in the refinery or petrochemical industry environment.

· Experience and knowledge in field instrumentation and control valve are added advantage.

· Experience in control system expansion, upgrading and renewal projects.

To apply, please visit to www.gmprecruit.com and search for Job Code: 20721.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793| EA Personnel: Lionel Liew | Registration No: R1330693

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

The E-commerce Global Supply Chain and Logistics team is dedicated to enhancing clients' shopping experience and reducing logistics operational cost in TikTok E-commerce. We are currently looking for talented software engineers that have a deep understanding of machine learning (ML), operations research (OR), data mining and statistical inference.

Responsibilities

- Design and develop machine learning algorithms for various tasks, including but not limited to customer segmentation, scoring, outreach, marketing, characterization, and incentive optimization.

- Support marketplace growth business goal attainment through optimizing outreach based on click through rate estimation, outreach timing selection, target audience selection and causal studies.

- Collaborate with data scientists, analysts, and subject matter experts to define data mining objectives and develop strategies to address complex business problems and opportunities.

- Apply feature engineering techniques to derive relevant features and embeddings from raw data and improve the performance of data mining models.

- Evaluate and benchmark different machine learning approaches, algorithms, and tools, and recommend the most appropriate solutions based on performance, scalability, and interpretability.

- Stay updated with the latest advancements in data mining, machine learning, and related fields, and apply this knowledge to enhance the team's capabilities and identify new opportunities.

- Communicate findings, insights, and technical concepts effectively to both technical and non-technical stakeholders, fostering a collaborative and data-driven decision-making culture.

Qualifications

- Master's or advanced degree in Computer Science, Data Science, Statistics, or a related field.

- At least 1 year of experience as a Machine Learning Engineer, Data Scientist, and experience in Deep Learning is preferred - Work experience in user growth, marketing algorithms, recommendation algorithms, advertisement algorithms or related fields is preferred.

- Proficient in using SQL + Python and experience with data manipulation and analysis libraries, experience with TensorFlow or PyTorch is preferred.

- Experience with big data processing frameworks (e.g., Hadoop, Spark) and distributed computing for efficient data mining on large-scale datasets.

- Solid understanding of machine/deep learning concepts and techniques, including feature engineering, model evaluation, and optimization.

- Strong analytical and problem-solving skills, with a demonstrated ability to handle and derive insights from complex and unstructured datasets.

- Excellent communication and collaboration skills, with the ability to work effectively in cross-functional teams and convey technical concepts to non-technical stakeholders.

- Publications at KDD、NeurIPS、WWW、SIGIR、WSDM、CIKM、ICLR、ICML、IJCAI、AAAI and related conferences.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

• Monitor contractors' daily activity, site progress, schedule and safety on site
• Carry out administrative works and other duties as required by QP/Superintending Officer/Consultant/Employer
• Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.
• Highlight discrepancies, feedback site progress and non-conformances/irregularities to QP/Consultants/Employer.
• Assist in reviewing of contractor's method statements and working procedures and assure contractor followed on site.
• Prepare lists of defects, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified.
• To ensure all the construction works have complied statutory requirements

Requirements

• Candidate must possess at least Higher secondary/Pre-U/A level/College.
• Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post-Graduate Diploma/Professional Degree in any field.
• At least 1 Year of working experience in the related field is required for this position.
• Must be registered as Resident Technical Officer (RTO) with BCA/IES/ACES
• Required Skill(s): Microsoft Office, Autocad
• Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Shall have a certificate in Building Construction Supervisors Safety (BCSS) Course
• Candidate with civil/infrastructure experience will be considered earlier.
• Must be a team player with strong leadership, communication, and supervision skills
• Immediate vacancy

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Authorizing technical drawings and engineering plans.
• Coordinate and monitor work progress at site including periodic site inspection and attending meetings during the course of the construction of the project.
• Proven problem-solving and achievements work progress according to the work schedule
• Prepare submission of shop drawing / Materials / MOS/ Monthly progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.

Company description
Julian Grey represents a renowned engineering multinational client based in Singapore, globally recognized for pioneering technological and production advancements.

Benefits
Enjoy performance bonuses twice a year, complemented by attractive Annual Wage Supplement (AWS) incentives.
Experience the convenience of having your daily commute costs reimbursed, making your journey to the office hassle-free.
Revel in yearly cash benefits and enjoy up to 21 days of annual leave.


Responsibilities:
Review and analyze technical aspects of project design
Design, modify, and issue elevator parts and installation drawings
Maintain design documents and ensure compliance with safety standards
Adhere to project schedules and deadlines
Computerize and document the design process, including program maintenance
Implement design improvements and conduct fault analysis
Demonstrate knowledge in coding
Utilize AutoCAD for design tasks
Monitor and follow up on outstanding issues; respond to inquiries
Prepare quotations for spare parts

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Juni
Reg No. R23116080
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Responsibilities

• SAP Business One implementation experience
• Experience and knowledge of key integration points between SAP modules Added Advantage Should have experience in HANA
• Defining and documenting requirements for software customizations and custom reports
• Developing software customizations using SAPs software development kit and supported development platform providing ongoing customer maintenance and support

Desired Skills and Experience Experience and Qualities:

• Minimum 3-4 years of related experience
• Good experience in Add - on development, B1 integration framework, .NET, VB.NET, C#, SQL, HANA.
• Hands-on experience of implementing SAP Business One within a variety of companies and industries.
• You must be able to communicate and develop positive relationships with a wide variety of clients, and must be a team player.

The primary role of an IT Support Engineer with our global company, Human8, is mainly to provide IT support to all internal users / employees by following the best practices in place, in a 1st and 2nd line multi-purpose role.

The position will involve a high level of customer service and support, proactive problem solving and an expectation of continuous service improvement of the Human8 infrastructure and support desk.

We are looking for a Service Desk Engineer to join our Global IT Operations team and support the growth of Human8 and its international expansion.

Together with your team members in the IT Operations team you will be responsible for the IT Service desk & support of all hardware and software.

You are able to align different service desk and regions in 1 unified process and maintain an international IT infrastructure.

With your knowledge and passion for technology, applications and IT systems you can take us a step further than the competition. You will share your knowledge with the users and guide them with training.

Provide support for 800+ users in +25 office locations around the globe, with occasional travel to other offices if required. Because of the different time zones you have to support there is willingness to work in different time zones (early or late shift).

Responsibilities

• Supporting our end users on hardware and software used at Human8.
• Maintenance and setup of end user devices (Windows & Mac).
• Managing the service desk.
• Creating documentation and training materials.
• Management of Office 365 and other licenses.
• Stock and asset management.
• Installation and support of IT equipment (Wi-Fi access points, printers, videoconferencing,…).
• Deploying new software.
• You will be involved in security operations (access control, configuration, patches, security updates, vulnerability scanning).
• Contact & follow-up with external suppliers for hardware purchases.
• Asset management and stock management (including wiping and disposal of devices).
• Monitoring of the IT environment.
• You can do magical things with scripting (small office automation tasks).
• You make and maintain procedures and other documentation.

Qualifications

• Bachelor in computer science or higher (or a proven track record in IT).
• Remote working techniques: Citrix, VPN, Remote desktop…
• You’re familiar with: routers, switches, TCP/IP, DHCP, DNS, FTPS, VPN, HTTPS, …
• Other relevant skills: Nessus, Qualys, antivirus, …
• Background of IT security techniques is a plus (technology, procedures, …) and you can help with maintaining the ISO 27001 certificate and improve our ISMS.

Knowledge of helpdesk software (FreshService, Zendesk, Jira, …):

• Good knowledge of software deployment automation and unattended installs
• Knowledge of IT networks, systems & security
• Security operations mindset

Excellent knowledge of Microsoft products and related services:

• Windows 10, Windows Server
• Active Directory, GPO, WSUS, DFS, Exchange Server, IIS, …
• System Center Configuration Manager
• Office 365 management and migrations
• Azure or cloud environments
• PowerShell scripting

You have at least 3 years of professional experience, but if you feel you’re the right candidate for the job please don’t hesitate to reach out!

Benefits & Perks

• Local perks & benefits
• Global hybrid working culture
• Diversity & Inclusion initiatives
• Team bonding events

About Human8

We're Human8, the human-driven consultancy, that connects brands with people and culture to drive positive change.

Human8 is the coming-together of 10 game-changing agencies from around the world: InSites Consulting, Direction First, Columinate, eÿeka, Join the Dots, ABN Impact, Answer Global, Space Doctors, Gongos, and Happy Thinking People.

We unite a creative, smart and ambitious group of +900 people across 23 locations under one vision: making brands more human by better understanding people and culture, empowering brands to take action, and enhancing the lives of the people they serve.

Responsibilities:

• Responsible for projects management, planning and the design of electrical building systems
• Meeting clients & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Analyze & selection of systems and evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as mentor junior staff
• Responsible for making e-Submission to authorities for utilities services and related building regulatory submissions

Requirements:

• Degree in Electrical Engineering accredited by Professional Engineer Board, Singapore.
• Minimum 3 years of experience in the industry, preferably in consultancy firm
• Able to work independently with minimal supervision
• Singaporean only

If you have the drive and capabilities to take our challenge, please send full details of your experience, qualifications, current and expected salaries via Sembcorp Career Page: https://hrsembcorp.darwinbox.com/jobs/jobsdetailed/id/a6458886983c34/grp_company/a632dab40df257.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

Job Description:

Our Embedded Engineers form a world-class, skilled engineering team that develops applications and drivers for our embedded products. As an Embedded Engineer, you will work closely with our software and hardware engineers to work on product evolution as well as support existing products. This role requires a highly versatile skill set and you will have opportunities to contribute to all relevant domains. Your responsibilities will include development and enhancing of new and existing products.

Requirements:

• Bachelor's Degree in Computer Science or MSc/MEng or related field preferred
• Minimum 5 years of relevant working experience
• Deep understanding of RTOS and bare metal programming on MCUs
• Hands on experience in developing peripheral drivers for I2C, SPI, GPIOs, SDRAM, ADC, Timers etc. on ARM Cortex M based Microcontrollers
• In-depth familiarity with U-Boot
• Experience in developing optimized and time critical code in C/C++
• Hands on FPGA programming (Altera or Xilinx) experience is a plus
• Experience with software architecture and/or API design, complemented by robust integration skills
• The ability to communicate technical information clearly and succinctly to both technical and non-technical team

• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

The E-commerce Global Supply Chain and Logistics team is dedicated to enhancing clients' shopping experience and reducing logistics operational cost in TikTok E-commerce. We are currently looking for talented software engineers that have a deep understanding of machine learning (ML), operations research (OR), data mining and statistical inference.

Responsibilities

- Deeply involved in the construction of domestic and international e-commerce smart supply chain, reponsible for aggregating dimensions and product dimensions forecasting work

- Based on massive e-commerce data from live streaming rooms, short videos, shelf scenes, etc., combined with machine learning algorithms, accurately predict various dimensions of sales volume, order quantity, GMV, etc., at different lead times. Integrate the forecasting results into high-value business scenarios such as production capacity preparation and inventory planning.

Qualifications

- Bachelor's degree or above, with practical experience in Machine Learning, familiar with Deep Learning algorithms;

- Proficient in Python and SQL, familiar with at least one of the following language: Java/Go/C++, able to proficiently develop in Big data distributed environment;

- Self-driven, able to deeply understand the business, adapt to rapid business changes, have good personal expression and communication skills, and be able to promote project implementation.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Key responsibilities

• Responsible for ensuring all aspects of the studio are in order, including studio set, equipment and all necessaries are in order to ensure a smooth production of news & current affairs programmes for CNA and all news bulletins transmission on Mediacorp channels.
• Assist Automation Directors on all responsibilities for the execution of daily news bulletins and current affairs programmes for both automated and traditional galleries
• Liaise with Producers, Automation Directors and Graphic Designers to meet technical and operational requirements during live transmission
• Liaise with Producers, Automation Director and all production stakeholders to ensure that editorial intentions are met and highest production standards maintained. You'll be equipped with the right skills and new and developing tools to deliver high quality production.
• Provide creative and technical expertise in regard to the preparation of the studio floor and studio control room for the production of live programs and pre-recordings.
• A high level of multiskilling is required and knowledge of areas such as robotic cameras, handheld cameras, jib, vision switching, EVS playout, operate news automation software, outside video and audio sources set up in the control room, technical and lighting set up as well as other essential studio equipment is needed.
• Ensure all work practices, including studio cleanliness and WSH guideline are met.
• Uphold and maintain News and Current Affairs programme quality by performing regular checks, reviewing feedback and identifying areas for improvement necessary

Key requirements

• Minimum a Nitec/ Higher Nitec in Video Production/ Diploma in Electronic/Electrical/Audio Engineering or its equivalent
• Must be able to adapt to changes easily, allow for flexibility with the schedule, and have strong attention to detail
• A demonstrated ability work without supervision in a high pressure environment is essential
• Experience with studio production with a strong understanding of studio equipment include switchers and audio board will be an added advantage
• Good organizational and project management skills are necessary
• A good team player and must be willing to work nights, on irregular shift including weekends and public holidays
• Proficiency in the English language and at least one other language, Chinese, Tamil or Malay is an added advantage to be able to understand the languages of the program.

Those with more years of relevant experience can be considered for a senior role.

KEY RESPONSIBILITIES

· Provide first-level technical support for our products, including troubleshooting and issue resolution.

· Monitor and maintain the operational status of the datacenter infrastructure.

· Respond to alerts and incidents in a timely manner, following established procedures and escalation paths.

· Perform routine datacenter operations tasks, such as equipment checks, environmental monitoring, and inventory management.

· Coordinate with internal teams and external vendors to resolve technical issues and ensure service continuity.

· Document and report incidents, activities, and maintenance tasks according to standard procedures.

· Contribute to the continuous improvement of support processes and datacenter operations.

WHAT WE ARE LOOKING FOR

· Prior experience in a technical support role, preferably in a product support or datacenter operations capacity.

· Strong understanding of IT infrastructure, including servers, networking, and storage systems.

· Ability to work effectively in a 24x5 shift environment, including nights, weekends, and public holidays.

· Excellent problem-solving and communication skills.

· Familiarity with ticketing systems and ITIL best practices is a plus.

· Relevant certifications in IT support and datacenter operations are advantageous.

Immediate 1 Year Project assignment for Singapore Citizen to join as Security Engineer

Mon to Fri Office hours

24*7 Standby Support if required.

CAT 2A Clearance required in this project

Attractive Basic Salary + HP Claim S$50 Monthly + up to 1 month performance bonus upon completion

Job Scope:

· Point of contact to assist and advise client for any ICT security related

· Lead and support customer in the matter of security incident response and resolution

· Manage, configure and upgrade a wide variety of security technologies (e.g. FW, UTM, IDS/IPS, SWG/SEG, VPN, EPP, DLP, ATP, 2FA, PAM, etc.)

· Respond managed security technologies fault alerts and/or customer escalation

· Use strong fundamental knowledge (e.g. TCP/IP) and product-specific knowledge to perform troubleshooting on common technical issues on the managed security technologies

· Perform escalation to internal product domain experts and/or external product vendors

· Work with internal experts/external vendors to resolve technical issues

· Prepare Incident Reports on high severity incidents

· Respond to inbound Change Requests (CRs), Service Requests (SRs), Queries on managed security technologies, in a timely manner (within stipulated SLA).

· Perform regular configuration backups on managed security technologies

· Plan and coordinate Maintenance Windows with customer on necessary software patching and version upgrades.

· Create and update technical documentations on managed security technologies

· Generate monthly reports according to service scope requirements

· Adhere to policies, procedures and security best practices

· Resolve problems independently and understand escalation procedure

Job Requirements:

· A Bachelor degree / Polytechnic Diploma in Computer Science, Information Technology or Information System

· At least 5 years’ working experience in IT Infrastructure Operation and/or Support

· Sound fundamental knowledge on IP networking (e.g. TCP/IP, routing, etc.) and operation systems (e.g. Windows, Linux, etc.)

· Strong critical thinking and problem-solving skills and a passion for information security

Technical Skills & Expertise:

· Professional certification and/or practical working expertise on some/most the below security technologies:

o RSA / SafeNet (2FA)

o Cisco ASA / CheckPoint /Fortinet / Palo Alto / SonicWall / AlgoSec (Firewall)

o Trend Micro / McAfee (NIPS / HIDS / NSM)

o CyberArk / BeyondTrust (PAM)

o Symantec BlueCoat / McAfee Web Proxy

o DSM (AV, HIPS, Host FW, etc)

o Container Security

o Imperva Securesphere

o Tripwire Enterprise

o AWS / MS Azure (Cloud)

Job Responsibilties:

• Responsible for projects management, planning and the design of Mechanical & Electrical building systems
• Meeting clients, permitting authorities & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Analyze, building computer models & selection of systems and evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as mentor junior staff
• Ensure the smooth completion of the project

Job Requirements:

• Degree in Mechanical Engineering accredited by Professional Engineer Board, Singapore.
• Minimum 5 years of experience in engineering design work for building services
• Singaporean only

If you have the drive and capabilities to take our challenge, please send full details of your experience, qualifications, current and expected salaries via Sembcorp Career Page: https://hrsembcorp.darwinbox.com/jobs/jobsdetailed/id/a64049e32e3679/grp_company/a632dab40df257.

Only shortlisted candidates will be notified. Thank you for applying.

The position requires engineer to carry out tasks related to IT security assessment, remediation and mitigation of security risks, carry out security patching, Operating System updates, monitoring of critical infrastructure, endpoint security, corrective and schedule preventives maintenance for broadcast IT system and support implementation of broadcast IT system projects.

• Provide technical support to broadcast equipment and systems in News Studios & News Post Production and asset management system, Outside Broadcast production van, News Room Computer System and etc.
• Document, communicate, collaborate, and handle security incidents
• Assess system vulnerabilities and provide guidance, remediate and mitigate the security risks
• Perform troubleshooting and repair of broadcast equipment and system.
• Perform preventive and corrective maintenance broadcast and IT equipment.
• Work with different business units to provide technical solutions to enhance existing operation and setup
• Evaluate and recommend new broadcast IT equipment and system.
• Support project implementation of broadcast IT system and infrastructures.
• Perform shift and standby duty to support broadcast system and infrastructures.

Requirements

• Degree or Diploma in Information Technology, Information Systems, IT Security or equivalent. CISSP, CompTIA Security, Certification in Information Technology Security field is an advantage.
• Microsoft certifications such as MCSA preferred
• Project management experience preferred.
• Relevant work experience (1-3 years) in cyber security related field preferred. Fresh graduates are welcome to apply.
• Basic understanding of cloud / enterprise security best practices
• Network troubleshooting skills of IT devices maintenance and experience with management and configuration of networking devices (switches, routers, firewalls) will be preferred.
• Perform shift and standby duty to support broadcast system and infrastructures.