Job Responsibilities

• Responds to Attractions recovery and repair of Ride & Show mechanical, electrical, hydraulic, and pneumatic equipment in USS (Universal Studios Singapore).
• Troubleshoots failed components using basic test equipment, schematics/prints and specialized tools, equipment and resources.
• Report to Team Lead during reset of Ride & Show system to ensure safe operation.
• Support Attractions Operation team on the safe evacuation of guests from Ride vehicles during downtime.
• Operate company forklift or specialised vehicle such as high-reach boom lifts when required for recovery of Rides and Shows (Training will be provided by company.)
• Operate equipment and tools safely in accordance with general handling practices and Safe Work Procedures.
• Logs completion of inspections, corrective action and/or repairs made and listing of applicable parts used.
• Generate the required Work Orders for repair work performed.

Job Requirements

• Diploma in Mechanical/Electrical/Mechatronic Engineering or related field of studies
• 3-5 Years experience in troubleshooting and repair of basic to moderately complex systems which include - electrical/PLC controls, electro-mechanical devices, hydraulic, pneumatic, and mechanical equipment will be an advantage.
• Ability to troubleshoot electromechanical problems and use good judgment in high pressure situations.
• Able to work at height.
• Able to perform 12 hours shift work permanent day and weekends/public holidays.

Preparing and implementing project plans.

Monitoring and optimizing safety procedures, production processes, and regulatory compliance.

Doing feasibility assessments and site inspections.

Developing detailed designs.

Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

We are searching for a dynamic Technical Project Manager to lead our platform team in developing and delivering next-generation solutions. This role requires a strong background and deep understanding of web3 technologies, Hadoop and blockchain protocols.

Responsibilities

• Define and communicate a clear product vision aligned with the company's objectives and market trends.
• Provide technical guidance and expertise to cross-functional teams, ensuring successful execution of product initiatives
• Implement agile methodologies and best practices to streamline development processes and accelerate time-to-market
• Conduct market research and competitor analysis to identify opportunities for differentiation and innovation.

Requirements:

• Strong technical background in computer science or software engineering, with experience in managing complex systems.
• Deep understanding of web3 technologies, including blockchain protocols, decentralized applications (dApps), and smart contracts.
• Proven track record of working effectively with engineering teams, both internally and externally, to deliver high-quality products on time and within budget.
• Excellent communication and interpersonal skills, with the ability to articulate technical concepts to non-technical stakeholders and engage with the Web3 community.
• Involve in writing Map Reduce jobs and giving input to HDFS for further processing.
• Responsible for data movement from client library and relation database to HDFS using Sqoop.
• Writing Pig Latin scripts and HiveQL.
• Managing and deploying on Hbase on Pseudo distributed cluster
• Experience across range of technologies/platforms/tools – Cloudera Hadoop, Spark, Hive, YARN, HDFS, MARIADB, Spark Streaming, Kafka, Spark SQL, Zeppelin, Grafana

Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

C&S Resident Technical Officer

Institution Project

Job Description:

• Assist RE/Consultant Team to attend to technical and design issues at site and report issues to RE/Consultant Team
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in October 2024

Job Requirement:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years working experience as a Resident Technical Officer.
• Preferably with experiences in Institution projects.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.

WHAT YOU WILL DO

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyse energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyse energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyse key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyse and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing
• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

Technical Competencies

• Advance in Energy Conservation Technologies, Proven Energy Savings Program, Standards and Benchmarking.
• Advance in the practical application of theoretical engineering knowledge
• Advance in the development and monitoring of engineering budgets
• Advance in planning of engineering and non-engineering activities in support of role
• Advance in the principles and application of risk based decision
• Consistently applies and promote LSS, MPS and change management tools

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for Quality Management System – Plant Maintenance Calibration.

Problem Solving

• Demonstrate creativity, maturity and foresight in providing solutions which are highly innovative, practical for implementation and may have strategic impact
• Lead cross-functional teams in the evaluation and resolution of complex problems with potential impact across business units and demonstrates ability to make rapid rational decisions under pressure

ACCOUNTABILITIES

• Undertakes activities to realize cost reduction, energy reduction or continuous improvement projects to be on time, on budget and to meet compliance requirements
• Effectively implements the Performance Management Process (PMP), ensures that objectives are developed, provides timely continuous feedback to direct reports, and appropriately rewards team members based on performance and demonstration of our leadership standards
• Implement effectively any tasks or projects as assigned by Supervisor as prioritized by business need.

WHAT YOU MUST HAVE

• Engineering Degree or equivalent
• Singapore Certified Energy Manager (preferable)
• Advance degree, such as Masters, would be a plus
• Work experience required with 5-10 years’ experience in engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behavior in alignment with our leadership standards

Functional Competencies

• Demonstrated project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance and calibration.
• Demonstrated capability in vendor service contracts management.
• Demonstrated knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-cantered, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.
• Demonstrated capability in the application of appropriate troubleshooting and problem-solving techniques.
• Effective communication skills, ability to lead cross-functional teams.
• Performance planning: objectives setting, metrics, action plan, reviews and performance management.
• Understands the site value stream and is customer focused.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with more than 2 years working experience
• Open to two years contract

​

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Job Responsibilities

• Responsible for troubleshooting and maintenance/repair of the aquarium filtration electrical components.

• Assist in troubleshooting of processes.

• Assist to operate and maintain aquarium filtration systems.

• Designated roster work by Supervisor.

• Ensure high standard of safety.

• Ensure high standard of water quality and clarity.

Job Requirements

• NITEC/Higher NITEC/Diploma in electrical engineering or related discipline.

• Willing to learn on the operation and maintenance of the aquarium filtration system.

• 5 years of relevant experience in electrical repair & maintenance of pumps, air compressors, control panels, VFD, actuators, ozone generators, PLC, HMI and etc.

• Background in electrical service and maintenance is essential.

• Experience in water filtration equipment and maintenance will be an advantage.

Responsibilities:

• Lead big Data Design and Development Activities
• Design, Development and Maintenance of Big Data MIS Application while working in an Agile team.
• Work with system analysts/business analysts to understand business/functional requirements and implement those in Java Spark/Scala Spark
• Identify and implement non-functional requirements in Java Spark/Scala Spark
• Identify opportunities for automation and lead automation activities.
• Provide L3 Support for Big Data MIS Application
• Conduct peer code reviews and ensure High Quality releases in Production.
• Guide and mentor junior developers.
• Participate in the research, design and development of scaling strategies.
• Ensure compliance with company procedures and security policies.

Requirements:

• Bachelor’s or master’s
• Problem-Solver with analytical and lean-agile mindset
• Strong experience in Java Spark/Scala Spark programming
• Must have experience in debugging and performance tuning of Spark Jobs
• Experience across range of technologies/platforms/tools – Cloudera Hadoop, Spark, Hive, YARN, HDFS, MARIADB, Spark Streaming, Kafka, Spark SQL, Zeppelin, Grafana
• Experience in Git/Bitbucket/Jenkins & Linux shell scripting.
• Sound foundation in algorithms and data structures.
• Understanding of Agile SDLC, DevOps and Site Reliability Engineering (SRE)
• Strong experience with Visualization Tool such as Tableau is desirable.

Summary

Responsible for product line quality and efficiency so as to achieve production KPIs. Introduce productivity improvement through Lean processes, automation, preventive maintenance and better tools / jigs / fixtures design. Managing engineering projects such as Digitalization, Automation, Localization, Cost Saving and NPI. Support Industry 4.0 digitalization of the entire production lines in Singapore Site.

Key accountabilities

• Managing engineering projects including Industry 4.0 digitalization
• Responsible for product line yield and quality
• Support/lead Continous Improvements and Lean initiatives
• Support ISO9001, ISO14001 and Iso45001 audits
• Conduct RMA/DOA evaluations
• Incorporate ECs in production and ensure its full implementation
• Create, update work instructions and train production technicians
• Support mass production of NPI
• Ensure complete, up-to-date, accurate and accessible engineering records as well as maintain accurate BOMs, routings, work instructions and ISO documents

Requirements

• Minimum Diploma in Engineering/Science disciplines. Bachelor’s degree in engineering.
• At least 3 years of relevant experience in manufacturing / production engineering
• Experience in Industry 4.0, Lean and Six Sigma
• Lean 6 sigma and Industry 4.0 experience
• Knowledge in analytical instruments will be an advantage
• Knowledge in ISO 9001, ISO 14001and 45001
• Experience in developing Work Instructions, BOM structure and routing hour
• Good communication skills both verbal and written

• Offer comprehensive technical support for ‘in service’ Terex AWP/Genie machines
• Collaborate and communicate effectively with fellow Technical Services, Sales and team members within other business functions
• Gain a comprehensive commercial understanding of the Terex AWP strategy and route to market and customer base. Through this awareness identify and support commercial opportunities within the Technical Services team
• Thorough Examination and certification - perform mandatory inspections on all AWP machinery to Genie or local governing standard
• Service and repair of machines at customer locations / sites or Terex facilities as required to ensure conformance with manufacturers specifications and company policy
• Carry out assessments/inspections and report findings (including BOM, estimated Labour and plan of action) on AWP machinery
• Interact with fellow team members to ensure accurate and timely sharing of information both technical and commercial
• Notify appropriate team member of any defective or unsafe equipment
• Inspect and test wiring and circuitry and replace faulty parts
• Clean parts and equipment using chemical solutions
• Apply finishes and surface coatings to products, using chemicals or by spray painting
• Carry out basic quality checks and support the quality program though closed loop reporting
• Accurate and timely completion of all relevant reports and documentation in support of standard operating procedures

Education / Qualifications:

• Technical Diploma or Degree in Engineering
• Minimum of three years’ experience gained working on MEWP’s in the Powered Access Industry
• Previous experience working in plant, diesel engines, auto electrics, hydraulics, diagnostic fault finding with lifting equipment and servicing MEWPsDriving Licence
• Preferred candidate will have IPAF operators’ licence or Genie operator’s licence
• Valid forklift licence (preferred)
• Valid CAP Certification (IPAF Competent Assessed Person) (preferred

Job Responsibilites:

* Set up and operate meal packing lines

* Troubleshoot packing line and improve efficiency

* Maintain and repair kitchen and packing equipment

* Ensure equipment operation safety

*Others adhoc duties as assigned

Requirements:

* Min 3 year experience in food production

* Good understand of food processing & packing equipment and process

* Hands-on mechanical/electronic/electrical skills

* Able to work in shifts

Job Responsibilities:

• Minimum 7 years worked in IOT and Blockchain technologies.
• Proficient in identifying/and understanding needs, focusing on the important real issues; translating issues into technical actions and implementing code and/or delegating coding to local team members.
• Expert coding with a proven track record of success in creating new software from concept to release; migrating existing software; leveraging existing code & tools; and integrating with code done elsewhere.
• Experience in Design and Architect for new requirement of project and existing application.
• Comprehensive understanding of client’s needs for the proper management and delivery of projects.
• Experience with building web applications using Node.js, MySQL, Express, Mongodb, JavaScript, HTML, CSS, graphs API’s using highchart and Angular chart and REST API services.
• Experience in query optimization and performance tuning. Load balancing and scaling server.
• Experience with Blockchain Ethereum solidity programming, testing, build setup with web3 and truffle environment
• Well-versed in understanding of Algorithms and Data Structures specially related to Blockchain i.e Merkle tree, Hashing, Mining, Consensus Algo ie Proof of Work(POW), Proof of Stake(POS), double spend problem and mining. HD wallet (Bitcoin, Ethereum) , ICO and Metamask integration for authorisation using cryptography.
• Experience with IBM Hyperledger fabric using playground, hyperledger-composer using nodejs chaincode.
• Extensive knowledge of Git internals and SVN.
• Experience on multiple Sensors and Raspberry Pi using Python and Nodejs library.

Job Description:

• Understand the project specifications, design and customer requirement.
• Determines project schedule by studying project plan and specifications; calculating time requirement.
• Maintains project schedule by monitoring project progress; coordinating activities and resolving problems.
• Control project cost by approving expenditures and manpower requirements.
• Scheduling of moving/set-up of tools to meet project objectives & deliverables
• Ordering of components required for the tools. Liaise with Procurement for ordering of components
• Support all aspects of process and engineering matters
• Ensure that Health, Safety and Environmental standards are met
• Supervision of other project team members

Job Requirements:

• Candidate must possess at least a Degree in Mechanical/Chemical Engineering.
• At least 3 years of working experience in the construction industry.
• Related experience in chemical/mechanical construction industry.
• Excellent interpersonal and communication skills

· Implement plant continuous improvement projects and cost saving efforts.

· Lead and implement projects streaming workflow and processes within the company.

· Manages Capital and Expense Cashflow accuracy for site projects.

· Manage various improvement programs and workstreams in the plant, track and report benefits of projects.

· Lead cross function team through the entire project lift cycle inclusive of preparing the business case of project, sourcing for vendors for quotation, change control, site execution and qualification activities to meet performance KPI deliverables.

· Any other duties as assigned by supervisor.

Job Description:

• Design and Development of Embedded Firmware for ARM Core/CORTEX-M/8051
• Design and Development of Embedded Hardware based on ARM Core/CORTEX-M/8051
• Work with Cross-Functional Teams to develop Project Goals and Requirements.
• Develop Embedded Firmware Architecture and Specification
  Develop a Functional Test Plan to evaluate Firmware

Requirements:

• Degree in Electrical & Electronics Engineering, Computer Engineering or equivalent.
• Good programming skills in C/C++
• Experience working with embedded peripherals like CAN, I2C, SPI, USB, PWM, ADC.
• At least 2 years of experience in Firmware Development or completed at least 2 Product Development cycle.
• Experience with Altium Design CAD
• Experience in Hardware Design to control Actuators, Servos, Solenoids
• Experience with Firmware Development in ARM Core/CORTEX-M/8051
• Experience in Hardware Design with Microprocessor/Microcontroller
• Design and Develop Customised Firmware/Embedded for Control Application
• Understand Control Theories and Algorithms in Position and Speed Control Systems
• Familiar with Analog Circuit Design
• Familiar with Functional Safety in Firmware Development

JobScope

· Capable to produce P&ID, E/R arrangement, Shafting drawings

· Familiar with IMO, Class rules & regulation and industrial standard.

· Familiar with marine system and equipment

· Experience in marine vessel P&ID system design, equipment sizing and arrangement, propulsion and power generation.

Requirement

· Diploma/Degree in Naval Architecture, Marine Engineering, or relevant courses

· Preferably with 3 to 4 years Mechanical Field related to shipbuilding. Fresh graduate may apply and 6-months OJT will be provided.

· Able to do calculations, develop ship piping system, Engine Room Layouts, HVAC, Shafting, etc

· Advanced level skills in drafting and MS. Office (Excel & PPT)

· Possess good interpersonal and communication skills

· Able to multi-task and able to work in a fast-paced environment

· Applicants without prior experience are also welcomed to apply

*We regret that only shortlisted candidates will be notified.*

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Clash checking in AVEVA
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Clash checking in AVEVA
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting,plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement form AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layoutand Piping General Arrangement from AVEVA
• Etraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and oyther discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

As a project engineer you will be responsible for the following duties:

• Manage the timeline and budgetary cost set for the project management, ensuring compliance with formal contractual obligations and performance criteria.
• Serve as a primary, day to day customer point of contact, communicating directly with the applicable members of the Nalco sales representatives.
• Work as an extension of the customer’s management team and provide contract compliance and fulfilment.
• Maintains excellent written and oral communication with customers and applicable Company contact.
• Work with project developers and field organization representatives to meet the deadlines in all related work assigned,
• Maintain a high degree of technical knowledge of the industry by monitoring new developments, new products, new research, new concepts, etc in the industry.

Requirements:

• Bachelor’s degree in chemical, mechanical or electrical engineering
• At least 1 - 2 years of industry experience ( ie: Water treatment, Oil & Gas / Pharmaceutical )
• Proficient in Auto cad software
• Strong project management skills
• Excellence interpersonal, communication and presentation skill
• Resourceful and a team player with the ability to work independently and collaboratively in a dynamic & challenging environment

Job Responsibilities

• Plan and monitor project progress to ensure timely delivery.
• Liaise with contractors, consultabt, design team, client etc,
• Manage project resources availability to meet project needs e.g. manpower, build components, equipment.
• Monitor and control project cost.
• Conduct risk assessment for projects
• Arrange O&M work as required.

Job Requirements

• Good knowledge of solar power system desihn.
• Good communication and interpersonal skills which is essential for project work.
• Self-motivated, hardworking and enthusiastic.
• Experience in solar PV installation.
• Diploma/Degree in solar/Renewable/Electrical engineering or related field.
• Proficient in PVSyst/CAD/MS Office (Project/Word), PowerPoint, etc..
• Familiar with fieldbus and other industrial communication protocol including Modbus, TCP/IP etc..

Job Description:

• Manage customer’s RFQ, review quote package
• Collaborate with customers and internal resource to define requirements
• Generate accurate and detailed quote summary for review
• Apply work knowledge to improve quote formats and output efficiency

Job Requirement:

• Diploma / Higher Nitec, preferably in Mechanical or Precision engineering.
• Preferably with 5 years experiences in precision machine shop environment.
• Must be able to interpret technical drawings, BOM and GD&T.
• Review material specifications, surface coating and material pre/post treatment
• Familiar with CNC metal machining process like turning and milling etc.
• Meticulous and excellent with details
• Pleasant personality and able to communicate well with customers for their request.
• Well verse in Microsoft WORDS and EXCEL.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Supervise and oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have working knowledge of all applicable electrical industry standards and recommended practices, e.g. NEC, IEEE, ANSI, ISA, NEMA, CP5 etc.
• Must have the knowledge and experience of instrumentation used to control and monitor processes in the chemical processing/Oil & Gas industry.
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software.
• Experience and ability to manage electrical and instrumentation engineering projects with knowledge of how to establish estimates for VO/Change Order works.
• Managing, allocating resources and ensuring completion of E&I work orders.
• Leading the electricians and instrument techs in finding and executing solutions to E&I problems on site.
• Planning and organization of some non-capital E&I project work, including plant shutdowns/TAR works.
• Able to have understanding the control system architecture and software sufficient to find and modify elements.
• Communicating with Project Engineer/QC engineer to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Nominating and training Instrument/Electrical Techs capable of doing works well.
• Assist to set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis.
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements.
• Resolve any unexpected technical difficulties and other problems that may arise at any time.
• Produce procurement schedules for the jobs and liaise with the procurement department to ensure site have adequate resources to complete the tasks.
• Produce ITP’s with QC Engineer and Task Briefings.
• Produce 2 week look ahead in conjunction with the Site Agent.
• Comply with company procedures and legal obligations.
• Promote and comply with environmental compliance.
• Deliver the works safely and to deadline.
• Promote best practice for Safety , Quality and Productivity.
• Ensure work is delivered defect/snag free.
• Endeavour to spot and highlight value engineering opportunities and innovaive ideas and closely working with CM.
• Coordinate with client and other Contractors for the project interface activities.
• Managing project scope and change control with commerical or without commercial impact.
• Monitor and ensure supervisor plan and instruct and monitor in DWI.
• Update and report daily progress status and lookahead minimum 3days plan with Supervisor.
• To Accurate and timely setting out of the works.
• Timely handover of works and Quality records without outstanding defects.
• Production of accurate records, drawing registers and weekly Reports.
• Must have good relationship with Site team & client technical representative.
• *FRESH GRADUATES ENCOURAGE TO APPLY*

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Together with site supervisor, review and ensure that engineering drawings issued for construction should be completed with site constructability.
• To learn on how to Check and to review issued BOM (Bill of Material) MTO’s for discrepancies and any non-construability or discrepancies shall be follow up and take actions.
• Together with material controller personnel in charge and manage for the respective construction areas to maintain an efficient and effective workflow and minimize wastage of all construction material and equipment.
• Immediate action if have any material shortage that is highlight from construction team and resolving any areas of concern at site as soon as possible.
• To learn on how to Coordinate for site arrangment to resolve any unexpected technical problem and liase with client personnel if have any engineering problem or design issues, if requested.
• Together with HSE personnel to resolve and close any finding at site.
• Together with QA/QC personnel to resolve and close any finding at site.
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements.
• To learn on how to Set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis or MTO.
• To learn on how to Prepare and develop MSRA before start execution any activity.
• To learn on Possess of techical knowledge, skills and international standards (eg. ASME, API etc)
• To learn on how to Oversee and monitor works progress as per project schedule.
• Update and report daily progress status and lookahead minimum 3days plan.
• Learn and conduct tool box meetings.
• *FRESH GRADUATES ENCOURAGE TO APPLY*