• Allocate work to contractors and subcontractors to facilitate the smooth workflow process.
• Assess the degree of hazards and risks to ensure workplace safety is maintained.
• Communicate with the management, contractors and sub-contractors on the adjustments to cost estimates.
• Conduct the negotiations during the course of the project in order to ensure issues are resolved.
• Control project scope to meet project objectives in order to enhance project deliverables and key work activities.
• Develop cost reduction strategies to enhance the overall value of the project.
• Monitor project costs to ensure the objectives of the project are achieved in accordance to building contract law.
• Oversee and ensure compliance with standards.
• Prepare tender and contract documents in accordance to the building and construction regulations.
• Prepare the cost analysis for the project in order to ensure the overall value is enhanced.
• Provide advice on contractual claims so that the project scope is managed.

Job Description

• Mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including piping/valve/mechanical equipment calculation, specification & data sheet, piping/equipment layout, pipe/equipment support & platform, material take off, etc. Review the piping isometrics and as-built drawings.
• Provide mechanical input (such pipe loading, etc.) and coordinate with other disciplines (including the BIM modelling team) for the design, procurement, installation and T&C work.
• Technical review of equipment/piping/valve vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work, including the cost estimation.
• Prepare the mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments.
• Manage the equipment/piping/valve suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning.
• Support on the installation and testing and commissioning work, and other tasks assigned by the management.

Requirements

• Minimum 4 years of experience in mechanical design (such as piping design, etc.) in process plant (water/wastewater treatment plant, incineration plant, etc.) with Degree in Mechanical Engineering. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects.
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization.
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD and MS Office.
• Able to work in Tuas area.

Responsibilities

• Design, control, and implement electrical systems and products
• Develop manufacturing processes according to global engineering codes and standards
• Manage engineering projects and deliver them on time
• Define customer needs and requirements
• Ensure that installations and applications are in line with customer needs and safety standards
• Collaborate with engineers and technicians to design and apply new system processes
• Perform quality and performance analysis on new and legacy IT systems
• Summarize data and report on test results
• Examine needs on new equipment, calculate costs and help prepare budgets
• Monitor maintenance and inspection plans

Requirements and skills

• Proven expertise as an electrical engineer
• Hands-on experience using design and calculation software
• Deep knowledge of electrical manufacturing processes
• Understanding of electrical engineering codes and safety standards
• Problem-solving abilities
• Attention to detail
• Strong organizational and communication skills

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Minimum 5 years of experience as a DevOps Engineer, Site Reliability Engineer, or in a similar role within a GCC (AWS). Required experience on GCC SHIP2.0
• Proficiency in CI/CD tools (e.g., Jenkins, GitLab CI,) and configuration management tools – Terraform
CI/CD Pipeline Design and Optimization:
• Collaborate with development and operations teams to design efficient CI/CD pipelines that streamline the build, test, and deployment processes.
• Implement GitLab CI/CD best practices and optimize pipelines to reduce build times and improve deployment efficiency.
• Develop and manage infrastructure as code scripts to automate GitLab infrastructure provisioning and configuration.
• Leverage GitLab APIs and CI/CD scripts to automate repetitive tasks, reduce manual intervention, and enhance team productivity
• Able to design and create release management- managing multi release deployments and env management.
• Strong knowledge of AWS services for Network, compute, storage, security, scalability, monitoring, and alert management
• Strong scripting skills in languages such as Python, Bash, or PowerShell.
• Experience with IaC tools (e.g., Terraform, AWS CloudFormation) and version control systems (e.g., Git).

Top Mandatory skills
1. CI/CD tools (e.g., Jenkins, GitLab CI,etc
2. Configuration management tools (Jira/confluence/gitlab Wiki)
3. GCC SHIP2.0
4. IAC setup for Inrfa - terraform

Skills which are good to have / optional
. knowledge of Python/API development
2. setup and development of CI/CD pipeline
3.experience on AWS chimes/Kinesis/Gen AI (bedrock)

Job Description

• Industry/ Organization Type: Energy Equipment and Solution Provider
• Position Title: Technical Support Engineer (Electrical)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5 days (Mon to Fri: 8 am-5 pm or 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS
• Duration: Permanent

Key Responsibilities

• Deliver technical support for after-sales service to both local and regional clients.
• Oversee the provision of immediate and efficient technical support through on-site visits, phone, email, and other virtual means for a variety of products.
• Offer expert technical guidance and propose solutions for resolving customer issues.
• Communicate with the internal team to elevate product concerns and ensure consistent follow-up with customers regarding the progress and resolution of these issues.
• Coordinate with the headquarters and affiliate companies concerning any product-related or technical concerns.
• Conduct hands-on training sessions for the internal team, such as technicians, to fully prepare them to conduct comprehensive product and system tests that verify functionality and compliance with specifications.
• Assist QA team in system testing, including conducting Factory Acceptance Testing, Interface Factory Acceptance Testing, and on-site testing tasks.

APPLY NOW!!!

• Min. ITE in Electrical Engineering
• Min. 1 year of quality engineering experience working in a manufacturing environment
• Comfortable to travel
• Experience in auditing to the requirement of ISO quality system standards will be an added advantage
• Training provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66245 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Up to $4,000
• Changi Airport Project

• Responsibilities:
• Execute and complete scheduled operations and maintenance (O&M) tasks, along with ad-hoc maintenance activities, within set timelines and with the highest quality standards.
• Conduct routine inspections and checks of each equipment and process unit, accurately filling out and submitting checklists to the supervisor without delay.
• Perform scheduled preventive and predictive maintenance tasks, submitting maintenance records and checklists promptly to the supervisor.
• Address equipment breakdowns with corrective maintenance, ensuring all checklists and records are submitted to the supervisor.
• Report any equipment abnormalities or failures to the supervisor and assist in implementing rectification plans.
• Support operations activities as needed.

Requirements:

• Diploma in engineering or Higher Nitec (mechanical, electrical, or industrial)
• Minimum of 3 years’ exp erience in facilities engineering or similar
• Knowledge of fire alarm systems.
• Understanding of building regulations and health and safety.
• Excellent communication skills, including the ability to work well with non-engineering colleagues.
• Problem-solving skills and the ability to troubleshoot on the spot.
• Must be physically able to climb ladders.
• Must be willing to travel to Changi T4

OTHER INFORMATION:

• Salary: From $4,000-$5,000 / Negotiable (Salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

• Coordinating and ensuring new engines upon receipt and installation.

1. Coordinate paperwork and processes upon new engines arrival
2. Engine Commissioning for all Industrial and Marine Engines
3. Work closely with the relevant stakeholders to ensure smooth process of installation
4. Troubleshoot if not able to start up during testing
5. Escalate if there are any deviation or issues

• Before Maintenance or Repair Event for Engines Secure that right information, tools and spare parts are available.

1. Carry out routine and preventive maintenance related work seeking data and using SDP. 3, diagnostics, MULTI, or other applicable system/tools according to service manual
2. Collect, understand and start up work order
3. Collect additional information
4. Secure access to right tools
5. Pick up spare parts

• During Maintenance or Repair Event for Engines Through well-known and described working methods and standards perform maintenance or repair on time in a correct and safe way.

1. Carry out work in a structured and methodical way according to checklists.
2. Prepare Industrial/Marine engines and or components
3. Complete visual inspections
4. Search for additional information in systems
5. Secure spare parts for additional jobs
6. Perform maintenance or repair on engines/component
7. Manage deviations
8. Return not used spare parts
9. Clean exchange parts
10. Return special tools
11. Restore engines to handed-in condition
12. Inform next level about additional faults or findings

• After Maintenance or Repair Event for Engines Secure minimized lead time of invoicing. Through clear description of performed work and/or communicated what needs to be done if the work is handed over to a colleague.

1. Clarify performed work in work order and put signature
2. End work order
3. Complete handover
4. Ensure all job cards, work orders, service sheets and component failure reports are filled and completed correctly.

Chan Chee Meng
EA 07C3069
R1110620

Job Responsibilities:

• Ensure vessel certificates are up-to-date and maintain e-documents within the system.
• Assist the Technical Superintendent or Manager in the preparation, monitoring, and control of repair and maintenance budgets for the fleet.
• Support the Technical Superintendent/Manager with the quotation and requisition processes for services and stores.
• Contribute to the creation of technical specifications for dockings and related operations.
• Review and follow up on Planned Maintenance System (PMS) reports from vessels.
• Oversee the tracking and submission of month-end reports from vessels.
• Carry out other ad-hoc tasks as assigned by the Technical Superintendent/Manager.

Job Requirements:

• Diploma/ITE in Marine Engineering or a relevant field (preference for Maritime or engineering majors).
• Excellent communication and interpersonal abilities.
• Proficient in MS Office software.
• Able to work independently.
• Ability to complete tasks within set deadlines.
• Effective team player.

Enterprise Data Access Control Technical Lead.

Are you a data professional with a passion for new technology and data governance trends? Do you understand the challenges of managing data at an enterprise scale? Are you excited about enabling data and analytics users by providing self-serve product-centric capabilities? If so, we invite you to join our team and help design and build our company's innovative data-driven future. As the Technical Lead for Enterprise Data Access Control, you will oversee all technical aspects of the design and development of EDAC, our self-service data access control product.

Responsibilities

• Oversee all technical aspects of the design and development of EDAC, our self-service data access control product.
• Lead a team of experienced data engineers and developers, working with the Product Manager and other product teams integrated in the EDE Product Line.
• Form a close relationship with technology vendors of industry-leading data products and help shape and deliver our product roadmap.
• Participate in new technology evaluations to identify opportunities and estimate effort to support the product roadmap with new tools.
• Manage the development team, working closely with the Scrum Master, the Product Manager, the Solution Architect, and other product teams in the product line.
• Run an agile delivery team, clarify requirements, design features, assign tasks in JIRA, support developers, produce and track estimates, oversee the development lifecycle and documentation, and escalate issues to the Product Manager or the Solution Architect as needed.
• Liaise with support and maintenance teams and infrastructure teams providing services to host your product.
• Work closely with key technology and service partners to ensure their products are correctly configured and delivering to help our product roadmap.

Qualifications

Required

• Bachelor’s degree in computer science, Information Technology, or related field.
• 8+ years of experience in software/data engineering and architecture.
• 5+ years of experience in data and analytics delivery initiatives.
• Ability to work in a fast-paced environment, driving results while collaborating with multiple simultaneous projects.
• Ability to work collaboratively with global teams across multiple departments, including offshore teams operating in different time zones.
• Proven track record of delivering projects on time and within budget.

Preferred

• Understanding of data or related trends such as Data Fabric, Data Mesh, Zero Trust, Data-as-a-Product, data ownership, and governance strategies.
• Knowledge of the AWS cloud ecosystem from a data and analytics standpoint, including a working knowledge of devops.
• Knowledge or experience of industry data access control products such as Immuta, Okera, Privacera, Apache Ranger, Security.ai, Cyral, Axiomatics etc.
• Knowledge of Enterprise metadata catalog tools such as Collibra, Amazon Glue, Informatica, Alation, Apache Atlas, Zaloni, etc.
• Data layer tools such as Databricks, Starburst Trino, Amazon Redshift, dbt, Matillion.
• Understanding of AI & Machine learning life cycle management and AI/ML model life cycle, tools like Amazon Sagemaker, DataRobot, Dataiku.

Job Description

• Industry/ Organization Type: Manufacturing – Pipes & Tubes
• Position Title: Pre-Sales Technical Consultant/ Pre-Sales Technical Consultant (HVAC)
• Working Location: Benoi
• Working Hours: Monday to Friday (8.30 am – 5.30 pm)
• Salary Package: Basic + AWS + Bonus +Transport Allowance
• Duration: Permanent

Key Responsibilities

• Collaborate with M&E consultants, business holders, and stakeholders at the design stage of projects.
• Recommend and advocate for the use of our products in various projects (eg HVAC/Cooling Systems).
• Offer technical expertise and consultation to ensure product suitability and compliance with project specifications.
• Develop and maintain strong professional relationships with clients and stakeholders.
• Prepare and deliver detailed technical proposals and presentations.
• Coordinate with the sales team to facilitate a smooth transition from pre-sales to the sales process.
• Monitor industry trends and competitor activities to enhance product positioning.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Technical or engineering qualifications.
• Strong communication and relationship-building skills.
• Experience in pre-sales or technical consultancy is advantageous.
• In-depth knowledge of piping products is preferred.
• Excellent problem-solving and negotiation abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67817 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Overview (Summary of the Role)

ARC(Advanced Response Center) Tier 1 (or Level 1 Technical Support) is required to work in a secure ARC environment. ARC is a type of call center that specializes in providing technical support or customer service for products or services. An ARC typically employs trained and specialized agents who are knowledgeable about the product or service being supported. They may also use advanced technologies such as artificial intelligence, chatbots, and automation to assist with customer inquiries and support.

ARCs often handle more complex issues that cannot be resolved through standard support channels.

They may also provide 24/7 support and have multilingual capabilities to serve a global customer base.

In addition to providing technical support, an ARC may also be responsible for proactive monitoring and management of the product or service being supported, identifying, and resolving issues before they become problems for customers. This can help to improve overall customer satisfaction and reduce downtime for critical systems or services.

Overall, an ARC plays a critical role in ensuring that customers receive high-quality technical support and service for products and services.

ARC Tier 1 is responsible for providingfirst level technical support to the Client’s customers. ARC Tier 1 will work closely with ARC Tier 2, Team Leads & Technical Support Engineers to achieve this purpose. ARC Tier 1 is the first line of technical support. This team is responsible for basic customer issues/enquiries/request/alert. It is the same as 1st Level support which provides basic technical or non-technical support functions.

Responsibilities

• Perform log & route [to Tier 2 or Resolver Team(s)]
• Server and network monitoring
• SOC (Security Operations Center)monitoring
• Perform 1st level troubleshooting on End-User Computer/Server/Network
• Basic POS troubleshooting
• Application troubleshooting
• Event monitoring
• Respond to the incoming enquiries/incident/request (Call, Email, Webchat, EUP, IVR handling)
• Record and manage all issues in Service Management System
• Broadcast notification
• Zscaler L1 troubleshooting and request fulfillment.
• Password reset and unlock.
• Provide timely status update on issues escalated and to close tickets within service level agreement.
• Ensure daily tasks are executed according to SOP (Standard Operation Procedure)

Job Requirements

• Willing to perform 12-hour Shift Work or Office Hours.
• At least 1 year IT support experience preferably in the IT service desk environment.
• Candidates who do not meet the experience required will still be considered if they can demonstrate proficient technical skills.
• Have technical knowledge & skills in following :-

- O365

- MS Excel (Pivot, filter, graphs)

- MS PowerPoint

- MS Windows

- Basic Desktop Troubleshooting & Resolution

- Basic Network Troubleshooting & Resolution

- BMC Remedy / ServiceNow

- Cloud Telephony system

• Good communication skill in English
• Good customer service skill
• ITIL4 Foundation certified advantageous
• Knowledge of service quality skill
• Knowledge of service level management
• Able to multi-task.
• Ability to work in a team.

Are you looking for a chance to work in a fast-paced and challenging environment that will utilize your creative abilities and CAD skills? We are looking for a dedicated and accurate mechanical drafter with an interest in mechanical engineering and a self-motivated attitude. You will be working with our expert engineering teams to create a variety of technical drawings and 3D models and will be able to contribute to the design process as well. We foster a positive and encouraging work atmosphere and offer plenty of opportunities for on-the-job mentoring and practical experience with several departments, including manufacturing and project management. Join our team and enjoy competitive pay and benefits as well as the chance to further your professional education and career prospects.

Job Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• Create technical drawings, and 2D and 3D digital models of mechanical equipment designs, using measurements, specifications and additional data from engineering team
• Collect initial drawings, calculations and design ideas from engineers, and combine all relevant data into coherent and complete initial design models for review and modification
• Coordinate directly with engineers and project managers to understand project requirements, verify design details and recommend modifications as needed according to company standards and best practices
• Annotate and verify all numerical designations and specifications in technical drawings and schematics, using Auto CAD and solidworks
• Provide support to engineering team as needed by creating technical drawings and 3D models within deadlines and utilizing multiple methods to ensure deliverables include all relevant design details
• Assist in ongoing project to standardize and unify design document standards by participating in meetings and preparing presentation materials as necessary
• Prepare project reports and check on updated drawing completion
• Meet with custmer to understand the design requirment
• Follow up with new enquiry to support sales team

Job Skills & Qualifications

Reqiured:

• Associate Deploma /degree in Mechanical
• Proficient with AutoCAD , Solidworks.
• Excellent technical communication skills with engineers and manufacturing personnel
• Strong attention to detail
• Able to work within strict deadlines

Preferred:

• Experience with mechanical manufacturing process

Benefits:

• Work From Home or meeting with cusomter at site & Flexible
• Opportunities for advancement
• SGD 3,000 – SGD 5,000 + Variable bonuses

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as an:

Application Engineer

Job description

· Handling various projects under the Service Division and technical support for projects under maintenance.

· Design Building Management System based on Technical Specifications

· Program equipment (ACMV, Electrical, Plumbing, etc.) under BMS based on the sequence of operation.

· Design and implement the graphical user interface, reports, and dashboards based on project requirements.

· Support Testing and commissioning of BMS projects

· Provide Root cause analysis for system faults/issues.

Key Requirements

• Engineering graduate, with knowledge is MS Office.
• Knowledge in MS SQL, VBA, online collaboration platforms and other programming languages is a plus.

Remuneration:

• $2,500.00 - $4,000.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $4,000.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

• Assist and report to the Project Manager at site.
• Ensure that the works are carried out according to the approved drawings and compliances to Authorities’ requirements, quality procedures and EHS requirements.
• Coordinate and work with Consultant, Sub-Contractor and team member for smooth completion of work.

EA Licence No. 16C7962

• Attend to customer enquiries and recommend preventive measures, provide prompt and effective solution to technical problems.
• Provide guidance, pre-sales preparation, costing, quotations, technical assistance, testing and commissioning.
• Attend meetings, site survey and coordinate for smooth operation of works

EA Licence No. 16C7962

• Produce industrial products costing, quotations and engineering data to customers.
• Commitment to customer satisfaction and quality.
• Comply with the requirements of the work environment.
• Know the business environment and market trends and advise to customers.

EA Licence No. 16C7962

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job objectives and qualification

STATE Aviation is seeking aviation technical experts to support an aircraft manufacturing company in design engineering and showing of compliance for transport category airplanes / large aeroplanes. Prospective candidates should have significant and proven working experience in one or more of the following areas:

• Systems Safety Engineering: Including but not limited to assessing and managing aircraft design according to ARP4761 and/or ARP4761A, and ARP 4754A.
• Software and/or Embedded Electronics Engineering: Including but not limited to defining and developing software / embedded software / airborne electronic hardware according to DO-178C and DO-254.
• Design Engineering Management: Including but not limited to the management of aircraft and aircraft systems design in compliance with Part-21 or equivalent regulations.

Primary Responsibilities

The Senior Technical Experts (STE) will work with the relevant team members of an assigned aircraft manufacturing company (Client) to support the generation of documents, test plans, and reports as required for design and showing of compliance. The aim is to grow the Client’s team to high levels of the right expertise by being technical mentors and by leading-by-example. The STE may also be asked to assist and advise the Client in reviewing engineering designs, plans, and organizational procedures to ensure that their organization has the right capabilities for effective design assurance.

Responsibilities:

To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

Prepare method statements, design plans, and specifications.

Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

Determine project requirements and estimate resources such as manpower, materials and equipment.

Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

Other job duties as assigned.

Requirements:

Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.

At least 1 year(s) of working experience in the related field is required for this position.

Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.

Familiar with Civil, Archi & Steel Structural Works

Experience in process plants handling both consultants with client will be added advantage

• Assist and report to the Project Manager at site.
• Ensure that the works are carried out according to the approved drawings and compliances to Authorities’ requirements, quality procedures and EHS requirements.
• Coordinate and work with Consultant, Sub-Contractor and team member for smooth completion of work.

EA Licence No. 16C7962

• Produce industrial products costing, quotations and engineering data to customers.
• Commitment to customer satisfaction and quality.
• Comply with the requirements of the work environment.
• Know the business environment and market trends and advise to customers.

EA Licence No. 16C7962