Responsibilities:

• Design of heavy structures made of aluminium alloy
• Liaise with clients, vendors and third parties on technical issues
• Cooperate with project team on the project planning and execution
• Supervise/check the design drawings and material take-off
• Perform structural analysis and prepare structural analysis report

Requirements:

• Degree in structural/marine/naval architecture/civil/ engineering
• Min. 5 years experience in structural design in offshore/marine/civil industry
• Strong technically and competent in structural design and analysis
• Familiar with and experience in international structural design codes, standards and project specifications and structural design software packages
• Experience in aluminium design is not required as training will be provided
• Good written and spoken English
• Come and convince us why you are the best person for the job

Install, service, and maintain of

Bolding machines. (TBM)

- Electrical Wiring

- PLC Based control system

- Motor control systems

Pump system

- Motor installation and Repair

- Commissioning

Filter Press Machines

Decanter Centrifuge Machines

Verify lighting installations against design specifications and drawings.

Determine load balance and distribution to ensure optimal electrical system performance.

Create single-line diagrams for household electrical wiring systems. (troubleshooting & repairing)

Install and commission household electrical systems and equipment.

Perform power calculations and distribution analysis for substation design and operations.

Conduct high voltage testing on equipment prior to operation.

Provide technical support on electrical system & equipment to project team.

Other adhoc duties to support project team.

PERSONIL SKILL

- Highly organized and efficient

- Excellent communication and fluency skills

- Strong work ethic and willingness to learn

- Quick learner with adaptability

- Proven leadership abilities

- Self-motivated and results-driven

- Independent worker with excellent teamwork skills

Job Responsibilities

• Assist in the design, build, wiring and testing of R&D prototypes.
• Sourcing of components, materials, etc.
• Liaise with vendors & suppliers on technical issues.
• Hands on troubleshooting and maintenance of existing systems.
• Perform other ad hoc duties as requested by management.

Job Requirements

• Diploma or Degree in Mechatronics/Electrical engineering.
• Entry level will depend on applicable skills and experiences.
• Must be able to comprehend electrical schematics and wiring diagrams,
• Hands-on experience in mechanical work would be an advantage.
• Able to work with minimal supervision and keen on learning new technologies.
• Team player and motivated to succeed.
• Fresh graduates with strong interest may apply as Assistant Electrical Engineer.

Electrical Engineer

Job Responsibilities:

• Design control systems.
• Preparation of drawings for customer approval.
• Preparation of drawings/BCM for shop floor production.
• Co-ordinating with clients, consultants and internal departments.
• Drafting work with the use of CAD system (AUTOCAD/SOLIDWORKS).

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands-on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.
• Excellent analytical thinking and problem-solving abilities.
• Team player and good communication skills.
• Physically fit and able to work in strenuous circumstances.

Job Responsibility

• Design, develop and maintain software for in-house designed parking system and /or automation solutions
• To provide adhoc remedial repair service as required by customers
• Meeting desired Service Level that is expected of from the customers/sites assigned
• PC software/system development for parking system / automation solutions
• Responsible for system design, support and recommend improvements and customization to conventional systems
• System integrations
• Product maintenance and customer services
• Microcontroller firmware development
• Study customer’s requirements implement new features for products improvement.
• Support system and service works on site as required. Choose best approach based on available resources for system development
• Brainstorming for ideas on creating or acquiring new resources
• Analyze the system symptoms or performance of system and make appropriate recommendations or solutions
• Implement or execute solutions to address feedbacks received

Job Requirement

• Minimally a Technical Diploma/Degree in Computer Science, Software Engineering, Electronic Engineering or its equivalent.
• At least 1 year of relevant experience relevant industry
• Knowledge in SQL skills and management
• Knowledge in coding skills such as C & Python
• Strong knowledge and experience in Visual Basic (VB.NET), WPF, C#, and/or ASP.NET
• Database knowledge such as MS Access, MSSQL
• Ability to discuss highly technical concepts
• Strong verbal, written, and interpersonal skills

Working Location : West side, near Pioneer MRT

Job Highlights

• On-the-job training and coaching.

• Immediate Hiring

Job Description

Job Responsibilities:

1. Participate in the design, implementation, and test of firmware systems for logistics automation.

2. Manage lab equipment and conduct PoC (Proof of Concept) tests for potential customers.

3. Work with colleagues in Korea and China to maintain and continuously improve system demonstrations at the Singapore lab.

4. Assist to manage the implementation of automation projects according to customer requirements.

5. Supervise project implementation and manage contractors, to maintain project schedule.

Qualifications / Skills:

1. Diploma or Bachelor of engineering in mechatronics, mechanical or electrical engineering, manufacturing, or other related discipline required.

2. 1~3 years of PLC programming or robotic programming.

3. Training will be provided.

4. Experience in logistics automation systems will be an advantage.

Install, service, and maintain of

Bolding machines. (TBM)

- Electrical Wiring

- PLC Based control system

- Motor control systems

Pump system

- Motor installation and Repair

- Commissioning

Filter Press Machines

Decanter Centrifuge Machines

Verify lighting installations against design specifications and drawings.

Determine load balance and distribution to ensure optimal electrical system performance.

Create single-line diagrams for household electrical wiring systems. (troubleshooting & repairing)

Install and commission household electrical systems and equipment.

Perform power calculations and distribution analysis for substation design and operations.

Conduct high voltage testing on equipment prior to operation.

Provide technical support on electrical system & equipment to project team.

Other adhoc duties to support project team.

PERSONIL SKILL

- Highly organized and efficient

- Excellent communication and fluency skills

- Strong work ethic and willingness to learn

- Quick learner with adaptability

- Proven leadership abilities

- Self-motivated and results-driven

- Independent worker with excellent teamwork skills

· Managed project lifecycle from BOM creation in SAP B1 to overseeing commissioning and handling after sales enquiries.

· Provide technical field assistance, in maintenance, installation, operation, and start-up for all CPM equipment; prepare customer field report after each trip.

· Assist customers service and the sales team, providing technical and process information for after-market sales.

· Coordinate customer service and purchasing department for after-market sales and delivery.

· Regular visits the prospects, customers, and agents to provide technical advice and generate sales opportunities.

· Maintain and analyses records of opportunities, quotes and contacts and knowing how to act on them.

· Engineering design & improvement of current parts

· Perform equipment assembly related task (quality check on incoming items, urgent assemblies, electrical I/O and PLC)

· Perform other related duties as assigned

QUALIFICATION AND SKILLS

· Bachelor’s degree in engineering (Mechanical Engineering preferred), or equivalent 5 years relevant working experience

· Ability to travel as needed. up to 30-50% possible.

· Customer service, sales support, or project management experience a plus

· Experience with ERP systems (SAP Business One is preferred), Excel, CAD (AutoCAD & Inventor is preferred)

Job Overview:

The Applications Engineer (AE) represents technical aspects of business development and project definition. AE is responsible for providing full technical support for Business Development/Sales of all Anaergia Projects from the origination phase through contract negotiation and hand over to Anaergia Project Execution Team with all required specifications and budget development. Consistently manage the assigned engineering activities in preparing project documents in compliance with project schedule and observing the correctness and the completeness of the provided information.

The AE’s goals can be summarized as follow:

· Design phase: providing technical support to the Sales Team by assessing technical information and develop conceptual/preliminary design of integrated solutions for projects using both Anaergia and third party technologies.

· Proposal phase: Cost and price calculation using Anaergia tools and basing design on Anaergia Design Manual recommendations, lessons learned and best practices

· Provide technical documentation and cost data for the Contracts, Sales, and Marketing teams and help negotiate technical issues at customer level.

· Permanent support to Sales during the proposal phase interfacing with client, client engineers, subconsultants, contractors and permitting agencies as required.

· Quickness and flexibility in responses to urgent questions from project managers, project Engineers and sales managers.

· Provide integrated view of the project and forge strong links between all internal and external project stakeholders to ensure a consistent and coordinated technical approach for all projects.

Job Responsibilities:

The AE’s tasks includes:

· Provide technical and commercial support and product advice for existing and future product portfolio within the areas of solid waste treatment, anaerobic digestion, biogas utilization, nutrient recovery and wastewater treatment.

· Develop Front End Engineering Documents (FEED) including Block Flow Diagrams (BFD), Process Flow Diagrams (PFD) and Process & Instrumentation Diagrams (PID) and general arrangement drawings during bid development and project development as necessary.

· Liaise and develop new Asian vendor database.

· Review and appraise customer specifications and provide summary notes including the specification’s alignment or otherwise with Anaergia’s Products and Technologies.

· Design systems, including biological processes using existing tools and process blocks in coordination with the Global Process Engineering Team.

· Process customer inquiries and orders; Analyze customer requirements and development of offers in close consultation with the Sales Team; Obtain, compile and process information about competitors and the market.

· Prepare proposals and price calculation according to the company guidelines and the implemented processes; Request quotations from defined and selected subcontractors and pre-negotiate the received quotes.

· Actively participating in Offer Preparation during the proposal phase to note any deviations; Participate in finding solutions in coordination with internal manufacturing departments and the sales manager.

· Compile all relevant technical documents for the proposal and / or for the contract.

· Support Sales department in request phase for pre-qualifications.

· Record all project relevant documents and costing data on the within the database.

· Perform continuous maintenance of costing data base in conjunction with the Global Applications Team.

· Support and coordinate preliminary design activities during project development of Anaergia Build Own Operation Business including site/civil, electrical, mechanical, structural as well as permitting and grant application activities as necessary.

Job Requirements:

Education and Experience

· Holds a bachelor’s degree in: Chemical Engineering / Mechanical engineering/ Environmental Engineer/ Residential water management or another high technical education or equivalent with a focus on municipal and environmental engineering.

· Fresh graduates are warmly welcomed. 1 to 3 years of working experience as an Applications Engineer or Process Engineer within the Industrial Plant business, preferable in solid waste treatment, wastewater treatment is considered highly advantageous.

· Understanding of all MS Office tools and ability to adapt to new digital tools.

· Basic understanding of process plants including chemical processes.

Technical Skills

The AE has the following technical skillsets:

· Good understanding of basic processes like wastewater treatment, biogas, anaerobic digestion and/or municipal solid waste (will be preferred).

· Understanding of mass and energy balance, equipment sizing.

· Ability to use MS office tools, AUTOCAD software (will be preferred).

The AE has the following Key Personal Attributes -

· Excellent interpersonal skills and a positive attitude to get things done.

· Passionate, highly driven, and hard-working, portrays an Entrepreneurial spirit, a great team player and gets things done. Has the ability to self-start tasks without dropping the ball waiting for responses from others. Inquisitive, solutions oriented. “Can do” attitude

· Always reading on new technologies, technically deep and detail oriented.

· Team player, humble. Meets promises internally and to external clients and project stakeholders and participants

· Aligned and motivated by our company Mission.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Assists Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements
• Understand the contract and scope of work for topsides with sub-contractor
• Prepares key project documentation as per project specification requirements
• Manages project topsides related drawings and controls technical documentation across disciplines
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget
• Assists topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assists topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Supports topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Reviews the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull
• Co-ordinates between discipline to utilize the shared license based-on work priority;
• Monitors & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer
• Records & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager
• Expedites the information required by each discipline prior to start & complete the topsides design works
• Monitor 3D model clashing issues with other discipline
• Prepares Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM
• Assists topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering
• Minimum 10 years working experience in offshore oil and gas project managing topsides design works
• Able to liaise with internal and external parties
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose of the Job

To achieve monthly and annual rental & sales revenue by servicing new and existing customers through renting & selling of Choon Huat’s construction equipment to the construction industry.

Job Description

• Create new accounts and identify new business opportunities in the equipment rental & sales business;
• Development of new customers and new applications / solutions for existing customers;
• Resolves customer complaints by investigating problems, developing solutions and making recommendations to the management;
• To ensure that the network of current and potential customers is expanded and maintained through weekly external face to face and telephone sales calls;
• Coordinate and liaise with Operation Department pertaining to sales order and after sales supports;
• Communicate technical expectation to the customer relating to the proposed solution, Choon Huat’s fleet, installation, operation and maintenance of all services provide;
• Take on call responsibility as required, and promote all Choon Huat products and services at all times;
• Cultivate relationships with existing and potential customers; and
• Submit sales activity reports regularly.

Requirements

• No prior experience required. Bonus if the candidate has an experience in renewable energy technologies (solar, wind, energy storage, etc.).
• Excellent communication and presentation skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and negotiation skills.
• Product training will be provided.
• Possess a valid Singapore driving licence.

Benefits:

• Working Schedule Monday to Friday 8am to 6pm
• Working Location – West area (Nearest MRT station – Joo Koon)
• Cell Phone
• Company Vehicle
• Attractive commission scheme, Performance bonus