• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Tuas Naval Base

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

Job Description

• Industry/ Organization Type: Electrical Equipment Manufacturer/ Production
• Position Title: Technical Support Engineer
• Working Location: Ubi
• Working Hours: Monday to Friday, 8.30 am – 5.30 pm; Saturday 8.30 am – 12.30 pm
• Salary Package: Up to $5,000 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to customers for UPS, DC Systems, and Battery installations, commissions, repairs, and maintenance.
• Coordinate with end-users on-site to ensure smooth installation, commissioning, and maintenance activities.
• Collaborate with customers and engineers to ensure safe execution of site work.
• Deliver training to customers on the startup and operation of UPS and DC Systems.
• Monitor and follow up on maintenance contracts to ensure work is completed promptly.

APPLY NOW!!!

• Minimum Diploma in Electrical/ Electronics Engineering or its equivalent.
• At least 3 years of relevant experience in the UPS and DC power industry.
• Willing to travel across Asia on short notice.
• Immediate availability and own transport required.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,. The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Responsibilities:

• Design, develop, and maintain MS SQL databases, ensuring efficient data storage and retrieval. Perform database optimization, query tuning, and management of large-scale data sets.
• Develop and maintain PowerShell scripts to automate repetitive tasks, system monitoring, and report generation. Ensure smooth integration between different systems and platforms.
• Write high-performance, maintainable, and scalable code using C++.
• Develop scripts for managing and automating server tasks, ensuring reliability and optimal performance of systems.
• Design and implement RESTful APIs, ensuring seamless communication between services and applications. Develop efficient and scalable solutions in line with modern development standards.
• Troubleshoot and debug complex technical issues, identifying and applying solutions timely.
• Maintain clear and up-to-date documentation for all developed systems, scripts, and APIs.

Requirements:

• Min 5+ Years of experience of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

ONSITE JOB PROFILE

a) Support the client in production / industrial engineering activities throughout the product realization activity

b) Study the Project requirements

c) Study the Concept design, development and production support of “tooling equipment” like Jigs and fixtures by employing ‘Computer Aided Design’ (CAD), for all components

d) Understand the Feasibility evaluation and testing of the tooling equipment

e) Prepare“3D CAD models” for the components in confirmation with the client’s standard operating procedures and practices for each production process.

f) Coordination of ECO (Engineering Change Orders) activity as per manufacturing customer’s standards and procedures through the use of SAP tools.

g) understanding and familiarization of the customer’s product and process requirements and training the delivery support team accordingly..

REQUIRMENTS TO PERFORM THE JOB DUTIES

h) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS/ Diploma) in Mechanical Engineering.

i) 2-4 years of experience in CAD and ECO coordination.

j) Knowledge of Solidworks software is required.

k) Desire for continuous education and training effort.

l) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.

TECHNICAL MANAGER Duties and Responsibilities:

• Serve as the technical expert for detailed design and construction aspects of the project

• Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

• Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

• Prepare detailed installation plans, methodology, processes and procedures for support of construction team

• Propose and oversee timelines for engineering proposals and submissions are met

• Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

• Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

• Communicate and collaborate with other managers, suppliers, and contractors

• Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

• Analytical and mathematical mind, capable of evaluating and solving various complex problems

• Leadership skills necessary to manage and develop a teamwork ethics

• Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

• Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

• Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

• Ability to work independently as well as part of a team

TECHNICAL MANAGER Duties and Responsibilities:

• Serve as the technical expert for detailed design and construction aspects of the project

• Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

• Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

• Prepare detailed installation plans, methodology, processes and procedures for support of construction team

• Propose and oversee timelines for engineering proposals and submissions are met

• Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

• Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

• Communicate and collaborate with other managers, suppliers, and contractors

• Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

• Analytical and mathematical mind, capable of evaluating and solving various complex problems

• Leadership skills necessary to manage and develop a teamwork ethics

• Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

• Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

• Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

• Ability to work independently as well as part of a team

Roles & Responsibilities:

· Collaborate with stakeholders to elicit, document, and prioritize business requirements related to payment systems.

· Analyse and translate business needs into functional and technical specifications.

· Work closely with development teams to design and implement File conversion requirements using the mapping specifications.

· Act as the primary liaison between business units, IT teams, and external vendors to ensure alignment and clear communication.

· Support User Acceptance Testing (UAT) by preparing test cases, validating results, and ensuring defects are resolved.

· Make changes to ANSI x12 and EDIFACT map

· Ensure delivered solutions align with business objectives and user expectation

Conduct workshops and presentations to gather feedback and validate requirements.

· Build and maintain strong relationships with key stakeholders to foster trust and collaboration.

· Encourage a collaborative and inclusive work environment that promotes knowledge sharing and teamwork.

Mandatory Skills:

· Knowledge of ISO 20022 messaging standards.

· Knowledge of Boomi Integrations

· Knowledge of APAC Payment types

Requirements:

· Bachelor’s degree in business administration, Finance, Computer Science, or a related field.

· Minimum 5+ years of experience as a Business Analyst, preferably in the payment banking domain and Industry Standards ANSI X12, EDIFACT

· Strong knowledge of payment systems, including TT, FAST. GIRO and other digital payment solutions.

· Proficiency in tools like JIRA, Confluence, MS Office, and process modelling software.

· Handson Experience in Communication Protocols AS2, FTP, FTPS, SFTP, HTTP, FSA etc.

· Handson and minimum 5 years’ experience in EDI Software’s like Sterling Integrators, GHX, SAP, Dell Boomi.

· Good Knowledge in Prototyping Tools Axure RP 8, Balsamiq and IO Draw with Mapping Tools SI Map Editors (8.0)

· Experience with agile and waterfall project management methodologies.

Technical Programmer |

Responsibilities:

• We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,.
• The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Requirement:

• 3 to 5 Years of experience In field of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

Interested candidates, please send your CVs on [email protected]

Regret to inform that only shortlisted candidates will be notified.

CEI: R1988671

EA License: 14C7275

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Job Descriptions:

• Execute sales strategies to penetrate the target market and expand the customer base.
• Conduct presentations and demonstrations that showcase the features and benefits of our smart workspace solutions.
• Manage relationship with clients to understand their unique needs and tailor solutions that align with their business objectives.
• Work closely with technical experts to design customized solutions that address client challenges.
• Provide regular updates on sales activities, pipeline, forecasts, and performance metrics to senior management.

Job Requirements:

• Candidate must possess at least Diploma/Bachelor's degree in Business, Marketing, or a related field.
• Experience in hospitality would be an added advantage
• Self-motivated and results-oriented, with a proactive attitude toward problem-solving.
• Willingness to travel locally for client meetings and industry events as required.
• Highly motivated, resourceful, and independent worker who is proactive and customer-focused.
• Fresh graduatesare welcomed!

Rewards:

• Opportunities for career advancement
• Free lunch in office provided
• Free transport to/from office

1. development of new repair project

2. supervise engineers' work & train engineers to improve their skill

3. report to management

4. at least bachelor graduation

5. at least 20 years of experience

6. Fluent English and Korean

7. strong technical back ground

8. design jig and test batch to confirm repair work

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Technical Engineer provides innovative solutions in ACMV industry. This person must be a highly skilled problem-solver who has the business knowledge and technological expertise to implement strategies, evaluate processes, and build upon an infrastructure that supports the ever-changing needs of customers. In this role, the technical engineer will work with complex systems, designing, developing, and integrating them at every stage of a project lifecycle. The ideal candidate can reliably deliver mission-critical solutions that boost accessibility, optimization, and security.

Roles and Responsibilities

• Participate and perform on site testing and commissioning for ACMV system.
• Participate and perform Integration testing and commissioning,
• Coordination of internal resources and external partners (contractors) and clients for testing.
• Provide information by collecting, analyzing, and summarizing tests results and issues.
• Support or lead Investigation activities for the problem areas
• Improve operations by conducting analysis and recommending changes in policies and procedures
• Protect operations by keeping information confidential.
• Have strong negotiation, conversational and relationship skills to manage resources, and clients.

Requirements

• Diploma / Bachelor's Degree in Mechanical Engineering or related field,
• At least 3 years of desired knowledge and/or experience - Proven working experience in T&C in ACMV
• Good knowledge of T&C processes and electrical equipment

Responsibilities:

• Provides safety engineering guidance and support to other disciplines, ensuring assurance of technical safety aspects in design.
• Ensures major hazards are identified, adequately assessed, evaluated, and managed in accordance with relevant statutory, client and project specific requirements.
• Identifies safety engineering elements are not fully integrated into the design and propose solutions to rectify the situation.
• Identifies change in regulatory requirements and advise relevant departments of requirements to comply.
• Develop specifications, terms of reference and scopes of work for specific safety engineering studies.
• Gather necessary information and provide inputs to safety studies.
• Develop or supports safety philosophies: Passive Fire Protection, Escape Evacuation and Rescue, ESD,
• Knowledge of Fire & Gas Detection, Fire Fighting Develop or support functional safety management: FSMP, SRS
• Supports the development of ESD and F&G Cause & Effect design.
• Leads hazardous area classification studies, Writes procedures, specifications, and material.

Requirements:

• Degree in Chemical/Petroleum Engineering with relevant experience in Process/Technical Safety
• Engineering degree with a Master's or Diploma in Process Safety and Risk Engineering, and experience in Technical Safety will be strongly considered.
• 3 years of relevant working experience
• Possess positive and willing to learn attitude.
• Able to multi-task and able to work in a fast-paced environment.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Confirm compliance with IMO, classification society (Class NK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Manage ship-related operations, with operational efficiency and troubleshooting skills.
• To check Ship design drawings and technical specifications
• Maintain appropriate technical drawings, specifications and reports.
• Identifying and resolving problems in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification society, manufacturers, etc.) to ensure smooth operations.
• Thorough control and rapid response in spare parts stock management, repairs and maintenance.

Requirements:

• Minimum 9 years of engineering experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Minimum 4 years of engineering experience in civil construction.
• Proven track record in the construction of;

o Experience in large size of civil construction project sites over SGD 1000M.

o Dredging works

o Reclamation works

o Caisson manufacturing work

o Construction using a large floating crane (SWL 3,000t or more)

• Good knowledge of marine engineering and structural mechanics.
• Good knowledge of Class NK and Japanese Government ship surveys.
• Experience in planning maintenance and management for working vessels.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.

Responsibilities:

• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Manage budgets and procure and manage materials and equipment appropriately.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Thorough control and rapid response in spare parts stock management, repairs, and maintenance.
• To formulate plans, check progress and control quality accurately.
• Facilitate coordination with relevant parties (shipyards, classification society, manufacturers, etc.) to ensure smooth operations. Identifying and resolving problems in the field and proposing improvements to increase efficiency and quality.
• Prepare progress reports and report them to head office.

Requirements:

• Minimum 4 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Electrical and or Electronic Engineering
• Experience in working at civil construction sites such as Jetty construction, Dredging, Ground improvement
• Experience in dredging and planning electrical equipment.
• Experience in Dredger salvage operation.
• Experience in dredging works using Grab dredgers.Good knowledge of Electrical circuit diagrams such as Electrical wiring for the assembly-type dredger.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Sufficient skills and experience are required in ship-related operations, as well as operational efficiency and troubleshooting skills.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Responsibilities:

· Develop and articulate a comprehensive product vision and strategy for managing risks in cryptocurrency operations.

· Identify market opportunities and trends in cryptocurrency risk management.

· Define product roadmaps, set priorities, and establish key performance indicators (KPIs).

· Conduct thorough risk assessments to identify potential threats and vulnerabilities in cryptocurrency operations.

· Analyse risk data to understand trends and impacts on the organization’s crypto- related activities.

· Develop and implement strategies to mitigate identified risks through digital solutions.

· Collaborate with engineering, design, and data teams to develop and launch risk management products.

· Create detailed product requirements, user stories, and acceptance criteria specific to cryptocurrency risk.

· Engage with key stakeholders, including risk management, compliance, IT, and business units focused on cryptocurrency.

· Gather and prioritize requirements from stakeholders and ensure alignment with product goals and regular updates and reports on product progress and risk metrics.

· Ensure digital products comply with relevant regulatory and industry standards specific to cryptocurrencies.

· Stay updated on changes in regulations and adjust product strategies accordingly.

· Collaborate with legal and compliance teams to address regulatory challenges in cryptocurrency operations.

· Advocate for user-centric design principles to create intuitive and effective crypto risk management tools.

· Develop training materials and conduct user training sessions to ensure effective product adoption.

Required Qualifications:

· Bachelor’s degree / Masters in top tier university

· 3+ years of experience in IT/product management, with a focus on risk management or digital security products.

· Proven track record of successfully launching and products in the cryptocurrency space.

· Strong understanding of cryptocurrency markets, technologies, and risk management principles.

· Knowledge of blockchain technology and digital security trends.

· Business level German speaking is required as the candidate will be required to liaise with German stakeholders, vendors and counterparts on daily basis.

· Familiarity with cryptocurrency compliance standards and regulations (e.g., AML/KYC)

Project Description

TLM Smart stream application upgrade along with development and reconciliation automation for a large bank in Singapore.

Responsibilities

• Development and configuration of solutions utilising smart stream TLM Application suite including TLM Control, TLM Smart studio, TLM Recon admin to support enhance and develop the platform
• TLM Solution config and implementation working with users/project team to design, build, test and deliver the solutions
• Create and maintain documentation
• Execute the unit testing, system integration & user acceptance testing
• Configuration/code management and maintenance of dev/test environment
• Follow the delivery governance model and regular updates to project & Business stakeholders

Requirements

- 5+ years of relevant experience
- Solid knowledge of a RDBMS in particular at least one of Oracle, Sybase & SQL Server. Certified DBA qualifications would be advantageous.
- Solid knowledge of at least two operating systems including Windows, Unix, and/or LINUX
- Has solid solution configuration/ implementation skills including the ability to configure business applications using front end tools, database table updates, and data transformation tools (ETL).
- Strong experience in smart stream TLM Application suite including TLM Control, TLM Smart studio, TLM Recon admin to support enhance and develop the platform
- Have worked on TLM Solution config and implementation working with users/project team to design, build, test and deliver the solutions
- Experience in unit testing, system integration & user acceptance testing,
- Writing test case, test design and configuration/code management and maintenance of dev/test environment
- Good communication skills and stakeholder management

Job Description:

This position works in the Learning & Development team of Operations function primarily supporting technical writing of Operation procedures and minor administrative support on work process

• Organize material through Operations Trainers and complete technical writing assignment (Operating Manual and Procedures) with focus on order, clarity, conciseness, style, and terminology.
• Coordinate with Operations Trainers and other stakeholders to establish technical content and update relevant document through Operations Trainer guidance
• Edit, standardize, or make changes to document material as instructed by Operations Trainers
• Support Operations Trainer in the draft, review, validate, approval and publishing documents through SharePoint work flow and other Procedure databases
• Execute Document Review process through Operations Trainer guidance - Publish materials (Available in SharePoint) and execute revisions or changes in scope, format, and content according to Electronic Operating Manuals (EOM) Standards and Procedure Standards.
• Maintain records, files of work and revisions of all documents in Procedure databases
• Need to work with photographs, drawings, sketches, diagrams, and charts to illustrate material.
• Draw sketches using Microsoft Visio to illustrate specified materials or valve line-up sequence.
• Administrative and Logistics coordination support in terms of L&D work processes

Job Requirements:

• 3 years or more experience in a Technical Writer role or Ability to prove Technical Writing skills in Oil and Gas industry sector
• Fresh Diploma / Degree in Chemical Process, Communication or English. In lieu of degree, prior experience in Oil and Gas Industry sector in a technical writing capacity
• Strong writing skills. Strong communication and organization skills
• Strong MS Word knowledge and proficiency in MS Outlook. Proficient in other MS application (Excel, Power BI, Visio) preferred

• Should be PEGA LSA Certified having 8+ years of in-depth hands-on development experience in implementing PEGA applications and must have recent experience using Pega 8.x Platform
• Must have 8+ years of experience in Software Quality Engineering processes, including modern CI processes and Test Automation and well-versed with Agile methodology and global delivery model.
• Should be a good team player with professional attitude towards work, having excellent verbal and written communication skills and be able to work independently.

CoreCompetencies:

· Pega 8.1.X or above experience is must

· Pega Guardrails and Best Practices

· Development Areas:

o Case Management, Rule Resolution & Availability, Class Design,

o Data Model, Flows, Activities, Data Pages, Declarative & Decision Rules, UI, Agents, Integrations, SLA

o Preferred: SSO, LDAP, Pega Upgrade, Production Support

· Debugging tools

o Live UI, Tracer, Clipboard, Logging,

o Preferred: PAL, Alerts, PLA, AES, SMA

· DB Areas:

o Declare Index, Triggers, OBJ Vs RDB

o Preferred: SQL, Column Population, Stored Proc

· Security

o Access Group, Roles and Privileges

o Preferred: Access Deny, Access When

· Other Core Technologies:

o Java

Other Preferred Competencies:

· Understanding of Object Orient Programming and Functional Programming paradigm

· Knowledge of JavaScript and technologies around it, like NPM, Node.js

· Understanding on HTTP and RESTFul API’s

· Good understanding of HTML, CSS, JSP, AJAX and JQuery.

Technology Skills

• Hands on experience in designing and developing applications using Java EE platforms
• Object oriented analysis and design using common design patterns.
• Profound insight of Java and JEE internals (Class loading, Memory Management, Transaction management etc)
• Experience in developing web applications using Struts, Spring MVC and EJB
• Excellent knowledge of Relational Databases, PL/SQL. Experience in Oracle preferred.
• Excellent knowledge of ORM technologies (Toplink/Hibernate)
• Experience in Rule Engine is a plus (Strata/Experian)

Role Interaction Points

• Interacts with the Technical Lead, BAs and testers for the project during the project lifecycle
• Interacts with the Client managers for status review meetings
• Ability to work on multiple tasks concurrently

Others

• 8+ years of development experience using Java/J2EE, BPM & related technologies
• Should possess good communication and problem solving skills
• Should have Aptitude and Attitude of learning and mastering new technologies and tools
• Working in client facing environment is a plus
• Working in Agile Methodology is a plus

Responsibilities

· At least 2 to 5 years of relevant experience

· In-depth experience in Java

· Working knowledge of Object-Oriented

· Working knowledge on any web framework, with understand MVC concept on the web-based application

· Working knowledge on conceptualizing and designing web-based application

· Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.

· Possess a passion in software engineering/development, with drives to be an effective team leader