As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Responsibilities:

• Team Leadership: Manage and mentor a development team of 5 – 10 members.
• Project Management: Provide accurate estimates and oversee project deliverables .
• Frontend Development: Lead front-end development using Node.js, JQuery, Bootstrap, and related tools
• Technical Expertise: Utilize Java, Python, Groovy & Grails, Spring MVC, Hibernate, and other frameworks for full-stack development.
• Banking Experience: Develop secure and compliant banking-related applications.
• Quality Assurance: Conduct code reviews and maintain coding standards.
• Consulting: Propose technical solutions to client challenges and improve system efficiency.
• Product Demonstrations: Present project outcomes to clients and stakeholders.

Qualifications and Skills:

• Experience: 10+ years in software development projects, with a strong focus on banking solutions.
• Leadership: Proven ability to lead development teams of 5 - 10 members.
• Banking Expertise: Hands-on experience with banking systems, processes, and compliance.
• Technical Skills: Proficient in Java,Python, Groovy & Grails, Spring MVC, Hibernate, and frameworks like Node.js
• Frontend Development: Expertise in JQuery,Bootstrap, BackboneJS, and related tools.
• Database: Experience with Oracle,PostgreSQL
• Communication: Strong ability to manage client expectations and liaise effectively.

Responsibilities:

• Responsible for Network related incident and change management
• Responsible for the commission, de-commissioning and tech refresh of network devices
• Facilitate in problem solving and collaboration
• Manage the smooth delivery of network operations in accordance with stipulated Service Level Agreements
• Provide firmware updates for network devices
• Ensure network infrastructure complies with security policies
• Prepare and maintain assets to ensure availability and update of capacity reports
• Update process and procedural documents
• Any other ad-hoc duties as required or assigned

Requirements:

• Bachelor Degree or Diploma in Information Technology/Information Systems/Computer Science, Business IT or its equivalent
• At least 5 years of experience in administration and implementation
• Good knowledge of the following, but not limited to:Firewall technologies (high availability, virtual firewall concept)
  IP load balancer
  Distribution and core switches
  LAN and WAN administration
  
• Good understanding of a services business in a high-tech environment from a supplier, integrator or operator’s perspective
• Strong analytical and problem solving skills, combined with ability to provide quick resolution to problems
• Proficient in troubleshooting skills
• Effective communication skills
• Self-driven and ability to work independently

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://sg.go.persolkelly.com/job/apply/10416>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Responsibilities

• Troubleshooting and resolution of issues within define SLAs.
• Preparation of System Operation manuals
• Process standardization
• Maintenance of source code libraries.
• Preparation and Deployment of application packages.
• Requirements gathering, impact analysis, solution consideration and effort estimation for CR

Work or Professional Experience & Functional or Technical Competencies

• Programming and development skills with JAVA, SQL, Powershell.
• Knowledge of Windows Server, Oracle DB server, SQL Server, WebOTX ESB, HULFT File Transfer
• Fluent in English and good writing skills in Design, Technical documents, and manuals.
• Ability to work independently and in a team setting.

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://go.persolkelly.com/job/apply/6041>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

We are looking for an Assistant Principal Engineer to join our ILS O&S Team. In this position, you will be responsible for in-service vehicle matters, item obsolescence and vehicle upgrading proposal. You will work closely with the Design and O&S team as well as the End Users in order to maintain the availability of the in-service vehicles.

Job Responsibilities:

• Meet up of End Users to understand their issues and matters on hand.
• Work with different departments, local vendors, overseas OEMS to submit design/pricing proposal.
• Monitor progress of outstanding issues and/or submitted proposals.
• Monitor allocated budget for the given year.

Job Requirements

• Degree in Mechanical Engineering.
• Knowledge and/or experience in mechanical design. Proposal writing and budgeting experience will be an advantage
• Self-motivated and able to work systematically
• Team player with good communication and presentation skill
• Singaporeans only

Field Engineer (Security System), West area, $3,500-4,200, START ASAP

• West area
• 5 days per week
• START ASAP
• AWS, Variable Bonus, Allowances, Performance Bonus

Job description:

· Participate in projects or maintenance services involving General Security Systems, Alarm Systems, CCTV Systems, Access Control Systems, and Server & Network Infrastructure as needed.

· Perform installation, implementation, configuration, and testing of system/storage equipment and setups.

· Diagnose and resolve issues encountered on-site.

· Conduct OS hardening, patching, and updates on servers and virtual machines (VMs).

· Create implementation, migration, and acceptance test plans for projects.

· Conduct user acceptance testing and address any findings or issues.

· Collaborate closely with Project/Maintenance Managers to plan and execute implementation tasks.

· Maintain accurate and consistent work instructions and service delivery processes.

· Prepare As-Built documentation for project handover.

Requirements:

· Possess at least a Professional Certificate/NITEC, Diploma, Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic/Information Technology) or a related field.

· At least 2 years of experience in the Operational Technology or Information Technology industry.

· Strong understanding of networking and IP/TCP protocols.

· Proficient knowledge of CCTV, Access Control Systems, and System Servers.

· Hands-on experience in security-related tasks, such as OS hardening, patching, updating, and virus scanning, is an added advantage.

· Must possess a valid Class 3 driving license.

Interested applicants, kindly WhatsApp to 87511349 and email your updated resume to [email protected] and we regret that only shortlisted candidates will be notified

Yvonne Chai Cheng Man

Reg No: R23115356

EA License: 23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Job Description

· Build data pipelines (ETL) to enable scalable processing of large volumes of data in AWS environment (Informatica, Pentaho)

· Organise, build and maintain data stores (e.g., RedShift, RDS) of structured and unstructured data (e.g., text, customer transactional data, work-flow/ticket/log data)

· Co-evaluate business needs and objectives

· Identify opportunities for data acquisition

· Conduct data analysis, working independently or with data analysts, and report on results

· Analyze and organize raw data

· Interpret trends and patterns

· Prepare data for prescriptive and predictive modeling

· Combine raw information from different sources

· Explore ways to enhance data quality and reliability

· Work with stakeholders to identify and solve business needs related to advanced data processing



Job Requirements

· Minimally a Degree in Computer Science, IT, or similar field

· At least 1 year experience working with SQL or as a data engineer or in a similar role.

· Proven work experience with ETL tool such as Pentaho Data Integration (KETTLE), Informatica.

· Excellent SQL knowledge and with proven experience with Data Analysis, Data Profiling and Data Processing.

· Good knowledge of working with databases such as Oracle, PostgreSQL, RedShift.

· Experience working with Tableau or similar BI tools.

· Technical expertise with data models, data mining, and segmentation techniques

· Ability to integrate data /data streams from different sources

· Great numerical and analytical skills

· Detail-oriented, with excellent organizational skills and experience

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd
• RCB No. 200007268E • EA License No. 01C4394
• Reg. <R21100074> <Cheryl Thng Wei Lin>

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Key Responsibilities

• Accurately document all equipment deliveries and removals.
• Conduct routine audits to ensure inventory integrity and compliance.
• Use equipment such as pallet jacks to facilitate safe item movement.
• Work within a ticketing system to manage tasks and assignments effectively.
• Execute the secure destruction of data-storing devices, including hard drives and SSDs.
• Manage shipping, receiving, and inventory processes.
• Prioritize and resolve tickets, escalate issues, and handle blockers to sustain inventory operations in line with service agreements.
• Be prepared to work outside standard business hours, including weekends or holidays, as needed.

Qualifications and Skills

• Diploma or Degree in IT, Computer Engineering, or a related discipline.
• At least one year of experience in IT Support or Systems Monitoring (fresh graduates with a proactive attitude are encouraged to apply).
• Minimum six months of experience in Inventory Control, Logistics, or Warehouse Management.
• Capable of performing physical tasks, including lifting and working at heights, with or without equipment assistance.
• Excellent communication skills in English, both spoken and written.
• Motivation to grow and learn new technical skills.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description & Requirements
• Apply technical knowledge, hands-on and customer insights to operate and administrate a cloud infrastructure
• Ensure all configuration conforms to high levels of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning to design documentation specifications
• Ability to codify or implement/deploy configurations with the principles of automation by default in new projects with proper documentations will be advantageous
• Ability to codify or maintain cloud systems in an automated fashion using tools like Ansible, CloudFormation, Terraform etc with proper documentation will be advantageous
• Participate in Cloud Migrations for VMs using tools like CloudEndure, Azure Migrate with more than 20 VMs migration or Databases would be preferred
• Collaborate with team members to engage clients in operational meetings, discussions, process betterment and contribute to optimisations for the client’s environment
• Maintain technical skills, certifications and knowledge of market trends and competitive insights; collaborate and share with the technical community specifically in the cloud space
• Ability to resolve issues with proper resolution/documentation technically and SLAs is required for this role

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd
• RCB No. 200007268E • EA License No. 01C4394
• Reg. <R21100074> <Cheryl Thng Wei Lin>

Maintenance Engineer | Up to $4k | 5 Days | Tuas

Location: Tuas Avenue 6
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Involve in one or more teams in supporting and maintaining systems, keep them up and running smoothly

• Report to the Team Lead/Service Delivery Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement.
• Assist Team Lead/Service Delivery Manager to deliver contract obligation within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.
• Liaison with procurement and equipment vendors.
• Perform 24/7 off-site standby for fault activation after office hours.
• Arrange and attend monthly meeting with customers.
• Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management.
• Provide solutions to technical problem associate with RF communication systems.
• Work location at Ang Mo Kio or Integrated Work Force (IWF) at customer premises if required. Office hours – 8.30am to 6pm. 5 days work week
• Required to travel to sites for work

Requirements:

• Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity. Fresh graduates may be also considered.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns)
• Preferably with experience in System-Level Maintenance in the following disciplines is highly preferred (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in written, verbal and interpersonal skills
• Proficient in MS Office (Words, Power-point & Excel)
• Preferably with Class 3 Driving License

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

5 days Mondays to Fridays: 8:30am to 6pm
$6500 – $8500
Pandan Road Singapore (Clementi)

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Position: Senior Software Engineer
Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

The Opportunity

• Our Client, US established MNC company
• E&I Engineer
• Monday to Friday: 7:45am - 4:45pm
• Location: Jurong Island, Singapore
• Basic Salary: $5500 - $6900(Based on experience)
• Completion Bonus

The Talent

• Bachelor's Degree in electrical engineering, instrumentation or maintenance engineering
• Min 3 years of experience in Electrical and Instrumentation Maintenance in chemical, petrochemical or pharmaceutical plants operations
• Knowledge of field instrumentation, electrical systems, control systems
• Excellent in communication and interpersonal skills
• Ability to stay current with new technologies
• Able to start in a short notice / immediately

The Job

• Expert in E&I equipment failures and ensures the reliability of equipment
• Troubleshoots critical and major plant issues related to E&I, participate in Root Cause Analysis to identify solutions
• Troubleshoot and maintain PLC
• Expertise in maintaining electrical system, switch-gear, transformers, MV/LV switchboards, fire alarm and CCTV
• Mentor technicians in executing preventive and corrective maintenance tasks
• Ensure the plant HSE standards environment

Next Step

• Prepare your updated resume
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Title: Software Test Engineer

Job Type: Contract - 2 Years

Job Location: East, Singapore

Job Responsibilities

• The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including test planning, analyzing business and system requirements.

The candidate will also responsible:

• Preparing the test environment, designing, and developing the test cases.
• Preparing the test environment, executing the test procedures.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Create traceability to requirements, analyze gaps and address them.
• Logging and tracking defects to closure
• Conducting test reviews with internal and external stakeholders.
• Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.
• Develop design documents and user manuals which would effectively describe and provide clear instructions on the test automation solution to the end users who include testers and stakeholders.

Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering
• At least 3 years’ relevant experience in executing testing and developing test automation solutions involving devices (UI-based or embedded) and/or back-office systems with familiarity on the full system development lifecycle from requirement, development, to testing and deployment.
• Good written and verbal communication skills.
• Able to work well both independently as well as in a team.
• Certification in software testing preferred.
• Experience in Micro-payments/Automatic Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage.

This is an outsourced role.

If you are looking for an opportunity and your skills align with this job, please send your updated CV/resume (in Word format) to Mounika at [email protected].

Mounika Tanuku

EA Regn. No. R22109193

EA Licence No. 93C4403

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

This is a 12-months contract as a Technical Support Engineer.

Job Description:

• Provide technical support and handling urgent escalation from external or internal customers or users in production environment with high-volume of transaction traffic;
• Strong collaboration, communication and interaction with all stakeholders including customers, product manager, developer and management team;
• Analyse service ticket data, identify incident root cause, draft Root Cause Analysis (RCA) report and follow possible maintenance for system-level improvement;
• Work closely with product and developer teams in global offices, participate and follow up in iteration, release and roadmap planning timely;
• Very flexible with capability to prioritize multiple incidents and deadlines to facilitate well in a fast-paced, rapidly evolving organization;
• High responsibility in continuous improvement in service quality and efficiency;
• Ability to provide coaching, training, identification, optimization and documentation of the customer or business support processes.

Job Requirements:

• BS/MS in Computer Science, Math or related scientific disciplines (Software Development is a plus);
• 4-8+ years of experience in similar roles - e.g. Technical Support Engineer, SL3 Engineer, Application Owner, etc;
• Must have strong capabilities to identify, analyze and resolve problems logically and systematically;
• 3+ years Unix/Linux with shell scripting, etc;
• 2+ years databases experience (Oracle, MySQL);
• 2+ years Web or App related project support experience with HTTP protocol, JavaScript, RESTful, Json, Web Service, TCP/IP, Linux/Unix;
• Understanding of software development methodologies and coding standards;
• Experience with software application debugging and troubleshooting;
• Familiar with technical support process and escalation management;
• Passionate with technical support to solve complicated customer issues;
• Ability to present or speak fluently to engineers, product manager and customers.

We regret to inform that only shortlisted candidates will be contacted.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job responsibility

• Technical advice on the commissioning of OCGT project
• Supervisor on the commissioning of OCGT project after GT fire

Job Requirement

• More than 3 years of experience in commissioning of Gas Turbine Combined Cycle power plant
• Advanced knowledge of auxiliary equipment start-up for Gas Turbine Combined Cycle power plant.
• Advanced knowledge of gas turbine control system and sequence.
• Work experience at construction sites.

>> Job title: Technical Supervisor

>> Location: 82 LOR 23 GEYLANG

>> Working hours: 8.30am to 5.30pm

>> Salary: $3500 - $5500

>> Preference: Full-time job

HIGHLIGHTS:

- One-on-one coaching system

- Personal Development Training

- Overtime and Transport 


RESPONSIBILITIES:

- Supervises and coordinates activities of workers engaged in one or more occupations.

- Establishes or adjusts work procedures to meet production schedules, using knowledge of capacities of machines and equipment.

- Minimum 3 -4 year relevent experience.

- Develop and improve operational processes to ensure the efficiency and effectiveness.

- Responsible for providing timely and accurate reports and/or metrics that align to the department reporting as necessary

REQUIREMENTS:

- Team Player

- Good Learning Attitude

- Citizen or PR preferred

DM Advertising Welcome you to join our team!

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Roles & Responsibilities:

• Assist Project Manager with coordinating, planning, and forecasting to optimize utilization of resources to fulfil budgetary and project milestones
• Perform site study for PV system recommendation
• Manage solar project site team to ensure compliance with safety standards.
• Monitor site work progress to ensure projects conform to specifications, schedules, and budgets
• Plan and prepare Bill of Materials (BOM) for projects.
• Coordination with procurement team to raise sales request and ensure timely delivery of materials
• Create checklists for review or inspection of solar projects.
• Assist in Investigation and troubleshooting of M&E issues during and post project implementation in coordination with clients, contractors, other stakeholders
• Assist LEW with site testing and inspection of installation.
• Assist Design and draft electrical single-line diagram (SLD), solar module layout and string-connection drawings for using AUTOCAD software.
• Assist Design and draft mechanical drawing of solar PV systems
• Prepare project documents for submission to authority and ensure smooth delivery of the project completion
• Assist with ad-hoc duties as assigned

Job Requirements:

• Diploma in Mechanical or Electrical Engineering or other related discipline preferred
• Knowledge in AutoCAD, Solidworks, and other modelling software (like sketchup, PVsyst, Helioscope) is an advantage.
• Ability to work independently and handle multiple projects concurrently
• Prefer to possess Class 3 driving license (Manual)
• Detailed Oriented

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669