Responsibilities:

· RTO shall be in charge of both M&E and Interior Design (ID) Works for this project

· Review all project drawings (including working drawings, shop drawings, authority submission drawings and as-built drawings) and specifications including architectural works, and raise any discrepancies and / or possible problems before the ACMV, Plumbing & Sanitary, Electrical, Fire Protection System, ID and architectural work commences on site and progressively throughout the entire course of the project

· Submission of weekly RTO report for the completed M&E and ID works, which shall highlight the progress or any quality issues

· Attend site meetings and site walks with Owner and consultants

· Administer the Safety Management System and conduct periodic inspections on the provision of safety measures together with the Contractor’s site safety supervisor or Contractor representative to ensure that the Contractor complies with the Safety requirements

· Check on site quality of works, materials and samples delivered to site, take measures to rectify any non-compliance and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications

· Ensure that the contractors carry out their work in compliance with Codes of Practices and requirements of authorities and government agencies

· Observe and comply with site safety, submit all reports as directed, and ensure that works are carried out in a safe and proper manner

· Supervision of all M&E and ID works as required under the project and mandated under the Building Control Act & Regulations

· Monitor the progress of work and certify contractor monthly progress claim according to actual work done on site

· Date of commencement: Jan 2025

· Contract Period: 14 months with option to extend on a monthly basis for total of 6 months

Requirements:

· Diploma / NCCS holder or higher in M&E discipline

· Must be experienced in reviewing M&E and Interior Design Works

· Min. 5 years of experience as RTO on local projects for clubs, restaurants, function rooms, commercial projects etc

· Experience in ACMV, Plumbing & Sanitary, Electrical and Fire Alarm System, ID projects

· Good communication skills

· Accreditation of M&E RTO Certificate by IES

· Required experience in supervision work for chilled water system, electrical system, fire protection system, plumbing and sanitary works

Working Hours

· Working hours shall be from 8.30 am to 5.30 pm Mondays to Fridays (inclusive of one hour lunch break) and on Saturdays, from 8.30 am to 12.30 pm (4 working hours).

· In view of the nature of your work, you may be required to work beyond the hours stipulated as and when required.

Gratuity

There will be no gratuity for this employment contract

Sales Executive | Up to $4.5k | Beauty World

Working Hours: Mon to Fri - 9am to 6pm (lunch break 1 hour) &

Sat - 9am to 1pm

Address: Eng Kong Park (Beauty World)
Salary : $3000 - $4500

Requirement:

• Possess at least Nitec or Diploma in Business, Sales & Marketing, Construction or related field
• At least 3 to 5 years of sales experience in the construction or related industry
• Proficient in MS office application
• Able to read technical drawing and specification
• Possess Class 3 driving license / own vehicle (preferable)

Job Scope:

• Identify sales opportunities and prospects to achieve continuous growth in business
• Identify potential customers, initiate customer visits, prepare sales proposals, quotations and contracts, follow up and engage in negotiations with customers
• Build customer relationships, support customers' project requirements and enquiries
• Identify new market trends, business opportunities and generate monthly reports
• Develop and implement effective sales strategies to expand our client base
• Manage and ensure achieving monthly sales target
• Account management/servicing from pre-sales, post-sales and commissioning
• Handling sales enquiries, generate quotations, product presentation and addressing customers’ requirements
• Follow up on customers’ payments
• Perform other ad-hoc duties as assigned by immediate superior

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Description

• Industry/ Organization Type: Energy Equipment and Solution Provider
• Position Title: Technical Sales Manager (Telco/DC Power Solutions)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5 days (Mon to Fri: 8 am-5 pm or 9 am-6 pm)
• Salary Package: Up to SGD 5500 + Allowances + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Identify and pursue new business opportunities within the Telecom sector for DC power solutions in Singapore and neighbouring countries
• Cultivate and maintain relationships with key decision-makers and stakeholders
• Develop and implement effective sales strategies to achieve revenue targets
• Collaborate with the marketing team to create compelling sales materials
• Possess in-depth knowledge of DC power systems and their applications in the Telecom industry
• Conduct product presentations and demonstrations for potential clients
• Nurture and maintain strong relationships with existing clients to ensure customer satisfaction and repeat business
• Address customer inquiries and concerns promptly and professionally
• Stay informed about industry trends, competitor activities, and market dynamics
• Provide feedback to the product development team based on market insights
• Collaborate effectively with cross-functional teams, including marketing and technical support

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering
• Min 3 years of working experience in Sales, specifically within the Telecom industry specializing in DC Power Solutions
• Proficient in Microsoft Office and CRM software

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66251 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Perform testing, diagnostics, maintenance, and repair of electrical and electronic devices or systems.
• Conduct component-level repairs on printed circuit boards using tools like multimeters, oscilloscopes, and similar equipment.
• Update, reset, and restore product software and systems as needed.
• Execute repair, troubleshooting, and upkeep tasks both in-house and occasionally on-site.
• Diagnose and resolve system and equipment issues on-site in various environments, such as indoor locations, outdoor areas, or vehicles.
• Participate in the setup, testing, and commissioning of equipment and systems.
• Take on project responsibilities or other tasks as assigned.

Requirements:

• Possess strong practical skills in electrical/electronic systems; experience with soldering is a plus.
• Ability to read and interpret schematics and technical drawings.
• Open to working beyond regular office hours and performing outdoor fieldwork when required.
• Holding a Class 2 or Class 3 driving license is advantageous.
• Preferably experienced in diagnosing and repairing industrial or electrical devices, automotive systems, or PCBA components at the component level.
• Holds an ITE or Diploma in Electrical, Electronic, or Mechatronics Engineering (or similar), with at least 1-2 years of field service experience.
• Candidates with a relevant degree or more than 5 years of experience in a similar role may qualify for senior positions.

• Location: Commonwealth
• Working Days: 5 days
• Working hours : 9am-6pm
• Salary : $5,000 - $8,000

Roles & Responsibilities

• Collaborate with functional consultants to develop add-on solutions for customers.
• Develop programs in Dynamics NAV and Dynamics 365 Business Central (on-premise or online).
• Participate in business requirement study.
• Develop Power BI Report and Dashboard.
• Develop Apps for Business Central using Power App.
• Manage & review team of outsource employees’ projects

Requirements:

• Skill in NAV C/AL, Business Central AL, JSON, .Net programming.
• Business Central Reports design.
• Webservices & API programming.
• Possess minimum a Diploma / Degree in IT.
• Minimum 5 years of relevant working experience.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Salary: $7,000 to $10,000
Location: Alexandra Point / Fujairah Branch Office (Rotation travel)
Working hours: 5 days, 9.30am to 5.30pm

The company owns and manages a fleet of coastal tankers and barges operating in Singapore, Malaysia and in the South East Asia region. We are seeking for qualified candidates to take up the challenges of Technical Superintendent based in Singapore and on rotation shift in Fujairah.

Responsibilities:

• Maintain vessels to the requirement of Classification Society, Flag state, Port State, Oil majors and state regulations that the vessels are plying.
• Execute planned maintenance system and ensure compliance.
• Approve and monitor repairs, prepare purchase order and works order.
• Prepare dry-docking / repair specifications and monitor work progress.
• Maintain vessel allocated budget and meet operational standard as required by Owners.
• Carry out internal audits, risk assessment, incident investigation and closing out report.
• Attend to all inspections by Class Society, Flag State, Port State, Underwriters and Oil Majors.
• Liaise with Terminal Representative, Charterers, Agents, Operators and Fujairah Freezone Official.
• At the Fujairah branch office, to be the first point of contact for vessel matters.
• Assist Crew Department in coordinating crew matters.

Requirements:

• COC Class 1 or 2 holders with sailing experience on product tankers
• Minimum 3 to 5 years’ experience ashore as a Technical Superintendent in tanker companies
• Experience in handling Foreign going vessel
• Must be willing to travel abroad (Fujairah) on a rotational basis
• Familiar with Oil Majors vetting’s and inspections requirements

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Etch, Clean, and Strip (ECS) Technical Lead

Working hours : 9 am–5:45 pm
Working Days: Mon - Fri
Working location: Gul Circle
Salary: S$ 7,500 - 8,000

DEPARTMENT : PRODUCT APPLICATION LAB
REPORTS TO : ASSISTANT GENERAL MANAGER, APPLICATION & PRODUCT MGT.

About the company:

A privately held, global company with a belief in innovation and employee empowerment. With over 1000 employees worldwide, a global supplier of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems to the electronic component, printed circuit board, semiconductor, industrial finishing and decorative industries.

Job Description

RESPONSIBILITIES

This role will be responsible for our Product Application Lab for Semiconductor applications. Working closely with the Sales team and global technical resources, the selected candidate will support the development and growth of Semiconductor industry products in the region, focused on Southeast Asia. The initial focus will be on Strip, Etch, and Clean (SEC) solutions, but will also grow to include the Elevate® line of electroplating products. Specifically, the duties will include:

• Having a deep understanding of Technic products for the Semiconductor industry,
• Keeping abreast of industry developments and market position/performance of comparable competitive products.
• Working with Sales team to select appropriate customer and application targets
• Visiting customers across the territory to understand their equipment, process, and product performance requirements.
• Starting-up and operating the Technic Wafer Processing and Failure Analysis lab
• Conducting product functional performance testing & measurements either on-site or coordinating with other Regions to generate test results remotely.
• Advising on laboratory upgrades needed to better serve customers
• Liaising with customers during qualification tests and providing trouble-shooting advice after installation
• Recommending the best product for the application based on product experience and/or laboratory trials
• Hiring and supervising at least one technician to maintain the lab and support customer trials
• Developing specifications and facility recommendations for local manufacturing of SEC products, either at Technic or third-party facilities
• Advise on hiring and lead training of operators for local manufacturing
• Set operating procedures, quality targets and release specifications for any eventual locally made semiconductor products
• Developing external collaborations with co-suppliers, Universities, or Government Research Institutes to strengthen our offering, improve our market visibility, or secure funding to advance our product offerings.

Requirement

• The role may require regular travel Overseas (1-2 times per month) & less frequent travel to France and the US (1-2 times per year)
• Qualifications: Graduate degree (Masters or PhD) in Chemistry or Chemical Engineering
• Experience: 10 Years of experience in Semiconductor Wafer Processing industries

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Duties

• Functional specification

a. Responsible to analyse and define detailed functional specifications based on the functional and non-functional requirements document.

b. Collaborate with Functional Business Analyst to clarify functional and non-functional requirements.

c. Define and ensure traceability from functional specifications to business requirements.

• Technical Design

a. Responsible to create technical design.

b. Ensure technical design adheres to architectural roadmap, Development practices, and security requirements.

c. In case of vendor implementation: Ensure vendor resources create technical design document.

d. Collaborate with developers and infrastructure teams to clarify functional specification and technical design during build, test and deployment phase.

e. Collaborate with Production Support to establish IT operations procedures and document as part of Tech Design.

f. Coordinate execution of threat modeling process with assistance of Security Architect to ensure implementation of safeguards is comprehensive in accordance with threats.

• Testing & Scope Management

a. Clarify test findings escalated by Test Manager and classify the findings accordingly (either as a defect or change request).

b. Provide input to impact assessment and estimation for Project Change Request.

c. Work with Test Manager to review test plan and functional test scope.

Requirements:

1. You will typically be assigned to work on specific projects and is expected to support the Application Delivery.

2. Manager (ADM) in all relevant technical matters, end-to-end, within the project.

3. You are expected to ensure your work are adequately documented and transferred to the production team post-cutover.

Essential:

• Commitment.
• Minimum 3 years of working experience in application testing, development and delivery.
• Good understanding and experience in Software Development Life Cycle (SDLC).
• Ability to work in a fast-paced, team-oriented environment.
• A strong & assertive communicator in speaking & writing Analytical mindset and good problem solving skills.

Good to have:

• Experience in working in vendor environment.
• 1 - 2 years working experience with AML (specifically transaction monitoring, ACTIMIZE) will be nice to have.

Key Domain/ Technical Skills:

• Experience with Oracle PL/SQL, Oracle SQL.
• Good to have: Batch Scripting, Control M, DevOps.
• Database (Ability to use and understand for the purpose of analysis and design an investigation)
• Analyse Requirements and form solutions for the application.
• Works with external application/user teams on E2E executions.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

5 days Mondays to Fridays: 8:30am to 6pm
$6500 – $8500
Pandan Road Singapore (Clementi)

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Brief Summary

• Basic $4000 + AWS + VB + Medical benefits
• 5 Days : 8.30am-5.30pm
• Working Location @ West
• AL 14 Days, Birthday Leave, Annual health check-up, Customized Gift for holiday season
• Required to attend a 2-week training session in Shanghai HQ
• New Headcounts

Responsibilities

• Assembly, testing, and maintenance of mechanical, electronic, or automated equipment.
• Adhere to operational protocols to ensure quality control and proper functionality of equipment.
• Collaborate with engineers to diagnose malfunctions and enhance system performance.
• Assist in documenting testing procedures and results.
• Maintain a safe and organized work environment, complying with workplace safety standards.
• Conduct wafer testing on the wafer platform according to the schedule.
• Perform die testing on the die platform as scheduled.
• Execute die sorting on the sorting platform based on the timeline provided.
• Uphold and manage 6S standards within the Fab environment.

Requirements:

• Min 1 year relevant experience
• Proficiency in handling mechanical, electronic, or automated equipment.
• Singaporean only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

EA Reg. No: R1988238

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date
• Lead and enhance any other HSE related improvement projects/activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma / Degree in Engineering, health, safety, or environmental field of study
• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• 5 days Mondays to Fridays: 8:30am to 6pm
• $5000 – $9000
• Pandan Road Singapore (Clementi)
• Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Conduct mooring analyses, installation analyses, riser analyses, sea fastening design, and diffraction analysis
• Deliver engineering deliverables to support specific projects either independently or through the management of internal and external resources
• Develop operational procedures for offshore utilization
• Identify equipment requirements for projects, including rigging design, and interface with sales and/or rental departments for procurement and delivery
• Develop mobilization and demobilization plans
• Create, maintain, and report project schedules as required
• Attend meetings with clients and sub-contractors
• Actively participate in HIRAs and QHSE-related activities
• Produce scopes of work for sub-contractors
• Attend and oversee offshore operations during execution phases to ensure adherence to procedures and guidelines
• Travel offshore and internationally as required

Requirements:

• Honours degree accredited by the Engineering Council in Naval Architecture
• Min 5 years' experience working within the Energy Industry, specifically Oil and Gas or Renewables
• Competency in a mooring analysis software with a knowledge of Orcaflex, Ariane, Hydrostar, Moses, GMOOR (or similar) being advantageous
• Project experience coupled with business acumen, the ability to apply knowledge, and the confidence to act as required.
• Ability to travel offshore and internationally as required

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Job Descritption:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion.
• Patrol / Check machine condition / Report / Service proposal w quotation & manage prospectives / secure order / execute maitenance job by team
• Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis

Job Requirement

• Minimum 3 year experience in aftersales service
• Experience in handling compressor/Valve/Pump
• Minimum diploma in Mechanical engineering

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Senior/Project/Site Engineer (LTA project, A1 main contractor)

Our client is a reputable A1 main contractor with an impressive portfolio in mixed-use developments, residential, commercial and MRT projects. In line with their ongoing progress in iconic landmark LTA projects, they’re now on a look out for Senior/Project/Site Engineers for their LTA Cross Island Line project. This role will be 5.5 days of work per week and performance bonuses to be provided.

Job Responsibilities

• Assist the Project Manager in coordinating, planning, and executing the project plan on-site
• Participate in site meetings, inspections, and monitoring to report on the project's progress.
• Coordinate with architects, consultants, and other stakeholders to ensure all technical drawings and plans are followed.
• Oversee day-to-day construction activities, ensuring compliance with health and safety regulations
• Coordinate site logistics, material deliveries, and equipment usage to ensure smooth project flow.
• Assist in managing project budgets and monitoring cost expenditures.
• Assist in troubleshooting project issues and delays, proposing corrective measures.
• Supervise to ensure productivity & quality of sub-contractors’ works, in compliance to specific requirement

Requirements

• Diploma/degree in Civil Engineering, Construction Management, or related field
• Minimum 3 years of relevant experience with civil/LTA projects

Location: East

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Marine Service Engineer

Location at Tuas, Work on site (sea)

5 Work Days 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary Open for Discussion + AWS(dec) + Variable Bonus (Jan) + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• Must DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

• Position title : Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours : 830 a.m. to 530p.m.
• Salary : $3,000 - $4,500 (depends experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Basic: $2,400 - $2,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683