Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Roles & Responsibilities

1. Oversee overall logistic operations

2. Schedule of time in and time out of vehicles daily

3. Ensure that vehicles are timely delivered to customers

4. Welding jobs

5. Producing and manufacturing of Company’s products

6. Ensure that all workshop workers are adhere to safety standards

7. React in time for emergencies; for example non-delivery and accidents, and report to the management immediately

8. Assist in all logistics matters

9. Any other duties as may assign from time to time

Job Scope

●Troubleshot complex multi-vendor network service provider issues.

Assisted with implementation and support of network monitoring

tools.

●Provided network support services for devices such as hubs, bridges,

routers, and other hardware.

●Managed, tracked, and coordinated problem resolution and

escalation processes.

●Develop technical solutions and system design.

●Generate solution design, project document and Bill of Material for

customer requirement.

●Conduct in-house evaluation and Proof of Concept trial with

stakeholders

Assist the project engineers during Technical Project

implementation and conduct of training.

●Handle system administration, network support, implementation,

troubleshooting in Windows / Linux.

●Perform network troubleshooting to isolate and diagnose network

problems.

●Created VPN infrastructure and allowed for secure remote

connections.

●Installed, supported and maintained company hardware and

software infrastructure according to best practices.

●Upgrade network hardware and software components as required,

while ensuring adherence to Cybersecurity Act, Cybersecurity Code

of Practice (CCOP).

●Document functional requirements/specifications documents for all

the necessary systems pertaining the network designed or

implemented and the necessary routing.

●Conducted product testing and demonstrations to customers and

end-users.

●Analyzed, troubleshot and enhanced network performance to drive

efficiency.

●Developed network test and validation processes to maintain

alignment with solution design.

Requirements

-Bachelor Degree or Diploma in computer science or related technical discipline

-At least 1-3 years’ experience in network design and planning

-Very comfortable Familiar with Microsoft Windows and in LINUX operating

environment (Ubuntu, Red Hat, etc)

-Min 1 years experience in complex project implementations;

-Strong understanding of cyber security, cryptography, security protocol, network

security, TCP/IP networking.

-Strong understanding of Risk Management, Disaster Recovery, Business

Continuity and IT Regulatory Compliance

-Experience in architecting or deploying Virtualization solutions for enterprises

would be advantageous

-Understanding the on-premise/hybrid and cloud networking model

-Ability to work independently with minimal supervision.

-Hands on experience in installing hardware such as servers, network switch,

cables, hubs, routers, and setting up required software environment/applications

-Solid CCTV and Audio/Video knowledge and experience

-Experience with IP communication technology such as IP PBX, video conference

and network management system

-Possess certifications like CCNP Routing & Switching, CCNP Wireless, CISSP or

-equivalent on Networking and Security technologies would be an added advantage.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Key Responsibilities

- Report to the Project Director / Manager in Charged of the WTW system.

- Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.

- Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.

- Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.

- Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools. - Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.

- Develop operating, maintenance and safety procedures for the WTW system.

Qualification & Requirements

- Degree in Mechatronic or equivalent

- Min 5 years working experience in Marine Industry or shipyard environment. - Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.

- Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).

- Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting. - Strong leadership with problem-solving skills. Added advantage with understanding in structural design.

- Teamwork: Ability to work effectively with all team members at all levels.

- Communication: Ability to communicate clearly and concisely with team members, vendors, fabricator and clients.

- Ability to produce written report and presentation.

– able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.

- Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

- The candidate must be willing to travel and work in marine and offshore environment.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW.

Alternatively, you may send your application and resume in MS Words format to [email protected] or Whatsapp to 8767 9648

We regret that only shortlisted candidate will be notified.

K N Tan
Registration Number: R1768143
EA Licence No: 17C8778 (JIH SUN EMPLOYMENT AGENCY)

R: N12OPF12

Job Description

• Industry/ Organization Type: IT Consultancy Firm
• Position Title: IT Sales Executive/ Sales Engineer
• Working Location: Ang Mo Kio
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4,000 + Commission + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Drive growth and meet sales targets by acquiring new customers.
• Develop and implement a strategic sales plan to expand the customer base.
• Provide sales, revenue, and expense reports, along with realistic forecasts, to the management team.
• Recognize emerging markets and market changes while staying informed about new products and competitive landscape.
• Comprehend the characteristics of our ideal customers and their connection to our products.
• Foster and maintain strong, long-term customer relationships by collaborating with them and addressing their needs.

APPLY NOW!!!

• Minimum Diploma in IT, Computer Science or related discipline.
• At least 2 years in Enterprise Software/ Security Software channel sales or channel partner development.
• Able to travel to Asia Pacific countries as and when needed.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70399 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

1. Assist M&E/ Design Consultants in reviewing the design intend and identify system discrepancies or improve system performance if necessary.
2. Carry out value engineering to the system whenever necessary without compromising the system performance and compliance to the local authorities’ requirements / Local Code of Practices.
3. Perform Equipment selection in accordance to the engineering calculation done and approved by M&E Consultants.
4. Perform sizing and selection of the Electrical system material in accordance to the engineering calculation done and approved by M&E Consultants.
5. Liaise with the equipment suppliers and material suppliers to ensure selection of the equipment are relevant and compliance to the technical specification/requirements.
6. Prepare technical submission to M&E Consultants for approval and follow up on the comment (if any) related to the submission.
7. Work closely with the associate team members to see that overall Electrical system design development are meeting the design intend of M&E Consultants.
8. Take charge in the overall planning and execution of Electrical system Testing & Commissioning.

About the Role:

We are seeking a motivated and detail-oriented Junior Test Engineer to join our team. In this role, you will be responsible for ensuring the quality and reliability of our operations system through testing and continuous improvement. If you are passionate about quality assurance, have an eye for detail, and are eager to grow in the field of software testing, we would love to hear from you!

Objectives of this Role:

1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.

2. Develop suitable testing plans and frameworks that align with our customers' needs.

3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:

1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Able to leveraging on inhouse GenAI for test case creation and enrichment

3. Ensure test runs and results are completed within the given time frame.

4. Develop and execute test plans to validate software functionality against requirements and specifications.

5. Identify, report, and track software defects and issues.

6. Perform functional, performance, security, and regression testing of software products.

7. Report test results and defects to the development team and other stakeholders, and work on their resolution.

8. Provide suggestions and feedback to improve the quality of the software development process across teams.

9. Stay updated with the latest testing tools, techniques, and methodologies.

10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:

1. Degree or diploma in computer science, engineering, or similar technical certifications.

2. At least 1-3 years of experience in testing, quality assurance, or similar roles in the banking industry is non nego

3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:

1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

Internal ref: 9278

Regards,

Lini

Recruitment Consultant

R22108463

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

RESPONSIBILITIES:

· Site works, inspection, planning, technical support to Project Manager and other site activities.

· Able to coordinate well with Sub-contractors, suppliers and consultants.

· Responsible for all inspection activities being carried out.

· Supervising team and ensuring safety and compliance of work on site.

· Liaise with authorities on technical matters.

REQUIREMENTS:

· Educational qualification in Structural, Civil Engineering or its equivalent.

· At least 3 years working experience in condominium projects

· Good organizational and communication skills

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

1.Attend vessel performs inspections,calibration, testing and troubleshooting on electrical & automation systems

2. Service/overhauling automation/electrical equipments in workshop

3.Good communication with shipcrew and superintendent

4.Good communication with shipyard

5.Prepare reports after finished the service job

A. Main Responsibilities

1 Responsible for all on-site technical and engineering matters.

2 Ensure works carried out meet company’s quality standards & contractual requirements.

3 Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification.

4 To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5 Assisting Project Manager in monthly progress claims and monthly progress reports.

6 Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements. 7 Ensuring Environmental, Safety and Health practices are carried out at all times.

8 Other ad-hoc duties assigned from time to time

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1.Knowledge of Electrical & Mechanical

2.Few years of hands on experience on repair and servicing of machineries.

3. To assist for new machine installation, maintenance, troubleshoot and repair.

4.Able to work and communicate well with customers and colleagues.

5.Good working attitude

6. Travelling required and able to travel within short notice

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Some responsibilities of a project engineer include:

• Planning, scheduling, predicting, and managing technical tasks
• Solving complex problems, such as transportation planning and grid interconnection
• Making decisions
• Providing leadership
• Using math skills
• Managing projects
• Communicating effectively

Project engineers are concerned with the engineering aspects of a project, while project managers are concerned with the business aspects.

Duties & Responsibilities:

• Study drawings for the projects and understanding requirements
• Determine operation requirements and preparing schedule
• Liaise with internal/external parties for the execution of works
• Ensure timely delivery of projects according to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties related to project execution
• Any other ad-hoc duties assigned

Requirements:

• Diploma/ Degree in Civil Engineering or any equivalent
• Min. 2 years of experience
• Able to work independently and as a team
• Good communication and interpersonal skills

12 months renewable contract through Encora

Design, implement, and manage storage systems for organizations. They ensure data is stored efficiently, securely, and reliably.

Key Responsibilities

1. Design and implementation: Plan and deploy storage systems, including SAN, NAS, and object storage.

2. Storage management: Monitor, maintain, and optimize storage systems for performance, capacity, and availability.

3. Data protection: Implement data backup, replication, and disaster recovery solutions.

4. Troubleshooting: Identify and resolve storage-related issues.

5. Capacity planning: Forecast storage needs and plan for upgrades and expansions.

Nice-to-Have Skills

1. Certifications: Storage-related certifications, such as EMC, NetApp, or VMware.

2. Cloud certifications: Cloud computing certifications, such as AWS, Azure, or Google Cloud.

3. Virtualization: Knowledge of virtualization technologies, such as VMware or Hyper-V.

4. Networking: Understanding of networking fundamentals, including TCP/IP, DNS, and DHCP.

Education and Experience

1. Bachelor's degree: In Computer Science, Information Technology, or a related field.

2. Experience: 2-5 years of experience in storage engineering, system administration, or a related field.

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Record information for unfinished calls prior to shift change.

Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Ensure adherence to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.

Marriott International is an equal opportunity employer. We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law.

Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To do prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in construction industry
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills