RESPONSIBILITIES & DUTIES:

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

QUALIFICATIONS & REQUIREMENTS:

• Min. 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Healthcare/Commercial Project

Job Description:

• Assist Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in January 2025

Job Requirements:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years’ working experience as a Resident Technical Officer.
• Preferably with experiences in Preferably with experience in Hospital/Healthcare/Institution/Commercial developments.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Benefits

• On Job Training, fresh grad are welcome
• Good progresssion X Stable company

Responsibilities

• Carry out Preventive & Corrective Maintenance in accordance with the Standard Operating Procedures and Work Instructions.
• Co-ordination of site works with sub-contractors/customers
• Provide project site & overseas on-site support services for systems testing & commissioning and clients' training
• Attend to any Emergency Service call during & after office hours & PH for weekly standby duty on a rotation basis

Requirements

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.
• Experience in site coordination, PM and installation works.
• Experience in the Installation and commissioning of devices for Electronic Low Voltage (ELV) systems (examples: Intercom, FDAS, ACS, BMS, BGM/PA, Nurse Call, CCTV, Alarm System, etc.)
• Added advantage: Experienced in Service and Facility Maintenance for hospitals, nursing homes and industrial sites.

Additional Information

• 5 working days: Monday – Friday 8.30am – 5.30pm
• Overtime to be required
• Standby 24/7 Duty on weekly Schedule

Responsibilities

• Identifying the challenges upfront and communicate it on time.
• Supporting the UAT test manager in all the JIRA set up, test plans and tracking and following up things on behalf of UAT manager.
• Able to back up UAT test manager, able to work closely and support in all activities of the UAT test manager.
• Maintain accurate and comprehensive test documentation, including test plans, test cases, defect reports, and test summaries.
• Able to track project for the BAU solution, day to day activities of the project, follow up on the open items and bring them to closure accordingly.
• Preparation of the Test Plans for L1, L2 and L3 including test approach.
• Develop and implement comprehensive test plans and strategies that align with project goals and timelines including run plans for different run cycles.
• Lead, mentor, and manage a team of test engineers, providing guidance and support to ensure effective test execution and career development.
• Oversee the execution of test cases, including manual and automated testing, to identify and report defects and ensure thorough coverage of requirements.
• Ensure that all software products meet established quality standards and adhere to industry best practices.
• Collaborate with project managers, developers, and other stakeholders to understand requirements, provide status updates, and resolve issues.
• Identify opportunities for process improvements and implement changes to enhance the efficiency and effectiveness of the testing process.
• Assess and mitigate risks associated with testing activities, ensuring that potential issues are identified and addressed proactively.

Skills Requirement

• Bachelor degree in Computer Science/Information Technology/Engineering
• Hands on experience in setting the project in JIRA, expertise in JIRA, tracking status, preparing different types of reports as per the stakeholders’ requirements.
• Knowledge and experience working on various testing frameworks
• Knowledge of AGILE delivery practices
• Problem-solving skills and the ability to analyze quantitatively, understand requirements and effectively translate to testing deliverables.

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Mechanical Maintenance team as a maintenance expert, responsible for executing maintenance works efficiently and safely to meet planned schedule requirements.

Below are some of the key responsibilities for the role;

• Performing preventive maintenance to ensure smooth operation of plant equipment and auxiliary systems
• Repairing or replacing defective components of machinery and equipment
• Assisting with contractor monitoring and maintaining asset maintenance plans
• Addressing work orders allocated by Mechanical Engineers

What you'll need to succeed

The successful candidate, should have;

• NITEC in Mechanical Engineering or equivalent
• 3 years of relevant experience in Power Plants or related industries (preferred)
• Self-driven and team-oriented with a positive work attitude
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Sabre is a technology company that powers the global travel industry. By leveraging next-generation technology, we create global technology solutions that take on the biggest opportunities and solve the most complex challenges in travel.

Positioned at the center of the travel, we shape the future by offering innovative advancements that pave the way for a more connected and seamless ecosystem as we power mobile apps, online travel sites, airline and hotel reservation networks, travel agent terminals, and scores of other solutions.

Simply put, we connect people with moments that matter.

What you’ll be doing?

The Senior Technical Product Support Specialist is a Level 3 support role, providing advanced technical assistance for Sabre’s Hospitality Solutions. This role involves resolving complex customer issues, collaborating with internal teams, and ensuring the smooth operation of support processes. The specialist will act as a key point of contact for technical escalations, guiding customers and internal staff to best practices while helping improve overall support efficiency.

This role is ideal for someone with a passion for solving complex technical problems, providing excellent customer service, and helping a team grow and succeed.

Key Responsibilities:

· Take ownership of escalated cases from Level 2 support, including urgent and high-priority customer incidents, ensuring timely resolution and preventing recurrence.

· Engage directly with customers via calls, chats, emails, or support portals to address their concerns when necessary.

· Monitor and resolve high-priority issues, ensuring they are addressed effectively and within expected timelines.

· Review and enhance internal support procedures and coach team members to adhere to best practices.

· Participate in regular meetings with product and development teams to prioritize and address software defects, focusing on strategic customer needs.

· Identify and address potential customer issues before they escalate, promoting better product health and customer satisfaction.

· Develop and expand the internal knowledge base by working with product and development teams, creating resources to assist the support team.

· Assess team training needs, provide technical guidance, and contribute to performance reviews.

· Represent the support team in meetings with executives, customers, and other stakeholders.

· Advise customers on the best use of Sabre products to maximize their value.

· Temporarily assist with monitoring support quality to ensure high standards.

· Support organizational goals by driving internal projects and initiatives.

Qualifications And Education Requirements:

· Bachelor’s degree in Computer Science, Information Technology, or a related field.

· Minimum of 5 years of experience in a technical product support role.

· Strong knowledge of cloud platforms (e.g., AWS, Azure), networking (TCP/IP, DNS), and system administration (Linux, Windows).

· Proficiency in debugging tools, APIs, and scripting (e.g., Python, Bash).

· Expertise in analyzing logs, monitoring tools (e.g., Splunk, Nagios), and resolving complex software or integration issues with a focus on security and compliance.

· Familiarity with database troubleshooting (SQL), and performance optimization.

Preferred Skills:

· Understanding of Property Management Systems (PMS), Central Reservation Systems (CRS), and Channel Management.

· Technical certifications such as ITIL, CompTIA, or equivalent.

· Advanced certifications in customer support tools or related technologies.

· Proficiency in Mandarin or Japanese.

Personal Attributes:

· Strong written and verbal communication skills with excellent interpersonal abilities.

· Demonstrates integrity, professionalism, and a high level of ethical standards.

· Analytical mindset with a passion for problem-solving.

· Detail-oriented and committed to delivering exceptional customer service.

· Self-motivated and effective in a matrixed, geographically distributed organization.

Why Sabre?

At Sabre, you'll have the opportunity to work on projects that make a real impact on the travel industry. You'll be part of a collaborative and innovative team that is dedicated to connecting people with moments that matter. Join us and help shape the future of travel.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career. This role focuses on developing world-class engineering solutions that meet the unique challenges of biotech production.

In this position, you will provide support to Process Engineers in the characterization of new and existing products, maintaining and improving metrology tools, and ensuring process excellence in a high-volume biotech production setting. You will collaborate extensively with various departments including Manufacturing, Equipment Engineering, Analytical Sciences, Facilities, Supply Chain, and Quality Assurance to support new product releases and continuous process improvement.

Scopes & Responsibilities

• Assist Process Engineers in troubleshooting, sustaining, and continuously improving production lines for consumables related to new product development, yield, quality, and throughput.
• Design and execute controlled experiments to optimize processes, while documenting and analyzing results.
• Support MES ticket handling and process verification/validation activities.
• Conduct nonconforming material analysis and investigations.
• Recommend and implement process improvements to meet production goals across multiple operations and technologies.
• Coordinate execution of equipment and process validation, data collection, and report summarization.
• Collaborate with Engineering/R&D teams to develop and refine processes for new and existing products.
• Maintain and update technical documentation, including technical requirements, drawings, and work instructions for engineering and consumables production lines.

Qualifications

• Diploma or Bachelor’s degree in Engineering, Sciences, or related field.
• Experience in manufacturing within a FDA-regulated environment is advantageous.
• Strong understanding of manufacturing processes within a regulated biotech or medical devices environment.
• Ability to execute test plans for components, materials, systems, and processes effectively.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).
• Experience with product & process feasibility studies, line validation, qualification, and process optimization.
• Excellent team collaboration, interpersonal, and communication skills.
• Strong documentation and technical report writing abilities.
• Ability to manage stress and handle multitasking across functions effectively.
• Proactive, innovative, and self-motivated.

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Computer Science.
• 8+ years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Microservices, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization.

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices.

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.
• Good command of English, both written and spoken.

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

• To provide supervision services to ensure the Contractors complies with the contract requirements and/or authorities’ requirements;
• To provide professional engineering services for reviews which shall include variation works;
• To review all drawings and specifications, and highlight any discrepancies, non-workable and/or missing details to authority and the Qualified Person (Design) [QP(D)] in a timely manner;
• To provide all relevant endorsements required by authority, BCA, other statutory authorities and agencies;
• To supervise all works or as directed by authority;
• To provide personnel and ensure all site supervision services are carried out efficiently and professionally;
• Any other professional engineering service and other services as set out in the scope of Services in this Tender and or as may be reasonably inferred; and
• Monitor safety and health including taking photos of unsafe acts and conditions and bringing to the authority attention.

Requirement:

• The RTO-C&S shall have a minimum of five (2) years of relevant experience as a RTO, of which at least three (1) years shall be in supervision of works in bored piling and temporary work.
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work
• Pro-active in resolving and managing site issue with good team spirit.
• Must be willing to do shift work

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check mock-ups done on site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• Write daily reports of works done by contractor and record daily manpower status on site.
• Inspect and maintain records of equipment/machinery/licensed machinery operator/permits (both statutory and aviation requirements).
• To ensure that the structural elements or critical works of the construction works are being carried out in accordance with the approved plans and with any terms and conditions imposed by the Commissioner of Building Control where necessary.

Requirement:

• Diploma in Mechanical or Electrical Engineering from a recognized tertiary institution or relevant qualifications.
• Minimum two (2) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and lighting & control systems.
• Accreditation with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore are preferred.
• Certificate in Building Construction Supervisors Safety (BCSS) Course

Job Description

• Industry/ Organization Type: IT/ Cybersecurity
• Position Title: Technical Support Officer (SSL)
• Working Location: Tai Seng
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + AWS + 1 to 3 months VB
• Duration: Permanent

Key Responsibilities

• Interact with customers, resellers, and partners to identify and resolve technical issues.
• Provide first-level technical support for Secure Socket Layer (SSL) certificates via phone and email.
• Coordinate and escalate complex technical issues to the team and/or partners when necessary.
• Document issues encountered and their resolutions for tracking purposes and future reference.
• Conduct basic SSL technical support training for the Sales Support Team.
• Perform any other ad-hoc duties as required.

APPLY NOW!!!

• Minimum NITEC in IT/ Computer Science or its related discipline, with at least 1 year of relevant work experience.
• Strong SSL product and technical background is required.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71349 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

"Join our dynamic team as a Technical Support Officer in our cutting-edge Engineering Lab, where innovation meets excellence!"

Working Location: Woodlands

Working Hours: Monday to Friday, 8am to 530pm

Salary: Gross up to $2500 per month

Contract: 5 months

Job Scope:

• Provide technical support during the preparation and delivery of classes/workshops/events in the lab and support the safe and proper use of lab assets
• Provide support to academic staff members in supervision of students/participants during activities
• Ensure materials and equipment are prepared and in working condition prior to the lab sessions
• Assist lecturers with demonstrations of experiments and equipment and conduct trial run for practical classes when necessary
• Provide assistance in admin duties, procurement of equipment and consumable for labs, receive delivery of items from vendors and assist in conducting annual stock take of assets
• Perform basic troubleshooting in the event of equipment faults and follow-up with external vendor on the repairs/servicing work
• Ensure adherence to QEHS (Quality, Environment, Health and Safety) procedures, including emergency plans, accident procedures, safe disposal of chemical waste, bio-hazardous materials, etc.

Job Requirements:

• Higher NITEC/Diploma in Electronics Engineering/Electrical/Electronic/Mechanical/Mechatronics, Engineering Design with Business or IT-related
• Proficient in IT tools such as Microsoft Office
• Good written and oral communication and administration skills

We regret only shortlisted candidates will be notified, thank you.

I hereby give consent to Certis CISCO Security Pte Ltd and its subsidiaries to access my job applicationfor the position applied and other positions that I may also be considered for and to use and disclose my personal data submitted in or as part of my job application to law agencies, government representatives and prospective clients. (DATA PROTECTION: The Company is committed to respect the statutory rights to privacy of all job applicants. However, we obtain, monitor, process and disclose personal information regarding employees and prospective employees to meet our need and according to applicable laws. For more information on our Personal Data Protection Policy, please visit https://www.certisgroup.com/privacy-policy.

Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker
• Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm

Technical Superintendent

• Salary: S$ 7,000 to S$ 10,000
• Location: Alexandra Point / Fujairah Branch Office (Rotation travel)
• Working hours: 5 days, 9.30am to 5.30pm

The company owns and manages a fleet of coastal tankers and barges operating in Singapore, Malaysia and in the South East Asia region. We are seeking for qualified candidates to take up the challenges of Technical Superintendent based in Singapore and on rotation shift in Fujairah.

Responsibilities:

• Maintain vessels to the requirement of Classification Society, Flag state, Port State, Oil majors and state regulations that the vessels are plying.
• Execute planned maintenance system and ensure compliance.
• Approve and monitor repairs, prepare purchase order and works order.
• Prepare dry-docking / repair specifications and monitor work progress.
• Maintain vessel allocated budget and meet operational standard as required by Owners.
• Carry out internal audits, risk assessment, incident investigation and closing out report.
• Attend to all inspections by Class Society, Flag State, Port State, Underwriters and Oil Majors.
• Liaise with Terminal Representative, Charterers, Agents, Operators and Fujairah Freezone Official.
• At the Fujairah branch office, to be the first point of contact for vessel matters.
• Assist Crew Department in coordinating crew matters.

Requirements:

• COC Class 1 or 2 holders with sailing experience on product tankers
• Minimum 3 to 5 years’ experience ashore as a Technical Superintendent in tanker companies
• Experience in handling Foreign going vessel
• Must be willing to travel abroad (Fujairah) on a rotational basis
• Familiar with Oil Majors vetting’s and inspections requirements

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Position Overview:
The Technical & Marine Assistant is directly accountable to the Fleet Manager, providing support in overseeing and managing the technical aspects of fleet operations. Responsibilities include assisting with vessel maintenance, ensuring compliance, handling technical documentation, and coordinating with various departments to facilitate smooth operations. Additionally, the role encompasses administrative duties such as arranging travel and managing related tasks for the Fleet Manager.

Key Responsibilities:

• Technical Support:Assist in the preparation and review of maintenance records and technical reports.
  Support the Fleet Manager in organizing and overseeing maintenance schedules and repair activities.
  Track and resolve technical issues, ensuring timely documentation and follow-up.
  
• Documentation and Compliance:Maintain and update technical records, including manuals, compliance certificates, and safety documentation.
  Ensure fleet operations adhere to maritime regulations and industry standards.
  Prepare and manage documents for audits, inspections, and regulatory processes.
  
• Communication and Coordination:Serve as a point of contact between ship management, crew, and shore-based technical teams.
  Coordinate with suppliers and contractors for parts procurement and service needs as required.
  Attend technical meetings, providing organizational and logistical support.
  
• Data Management:Analyze technical data to identify performance trends and suggest improvements.
  Contribute to the creation and refinement of technical procedures and best practices.
  
• Emergency Response:Provide assistance during technical emergencies or incidents, supporting troubleshooting and resolution efforts.
  

Qualifications:

• Education: Degree or diploma in Marine Engineering, Mechanical Engineering, or a related field.
• Experience: Prior experience in marine engineering, ship management, or related technical fields is advantageous.
• Skills:Strong knowledge of shipboard systems and technical operations.
  Proficiency in handling technical documentation and data analysis.
  Effective communication and coordination skills.
  Ability to multitask and perform well under pressure.
  
• Certifications: Relevant maritime certifications or qualifications are desirable.

Working Conditions:

• Environment: Primarily office-based, with occasional travel to ships or shipyards.
• Hours: Full-time role, with the possibility of irregular hours based on operational demands.

ROLES & RESPONSIBILITIES

• To assist in fixing Vending Machines (non-electrical works), such as

1. Removing and fixing Vending Machine’s columns
2. Basic testing of Vending Machine
3. Regularly lift and/or move objects

• Cleaning of cylinders
• To assist logistics supervisor in delivering machine to location
• To upkeep 5S housekeeping at Technical Services
• Ability to do welding.
• Any other duties assigned by Superior

REQUIREMENTS

• No experience required, training will be provided
• 2 months contract until February 2025.

Work Location: Kaki Bukit View

• Central-North location
• 5 days work week
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural/ geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Job Purpose

Technical Officer (TO) works in a team to perform preventive and corrective maintenance of railway signaling and communications systems to improve its reliability. TO assists in the preparation of maintenance activities and is technically inclined and adept in handling electronics and computer-based systems and equipment for maintenance.

TO also supervises the works of contractors and external stakeholders to ensure adherence to operating requirements, quality standards and safety standards. O can communicate effectively within the team and able to multi-task and can prioritize assigned maintenance workload in supporting maintenance activities.

Duties & Responsibilities

1. Work in any of SMRT depots, tracks, and facilities, as assigned by supervisors.

2. Work in rotating or fixed shifts (i.a.w. MOM guidelines), as assigned by supervisors.

3. Perform Preventive and Corrective on railway infrastructure assets, as assigned by supervisors. (Training and qualifications will be provided by company).

4. Operate equipment, locomotives and/or specialized track maintenance vehicles within depot and mainline tracks, as assigned by supervisors. (Training and qualifications will be provided by company).

5. Ensure the railway infrastructure system defects are identified, classified, and mitigated/rectified promptly.

6. Ensure that railway infrastructure defects are recorded and reported accurately in accordance with the maintenance procedures or OEM technical manual.

7. Ensure all works are done in a safe manner in accordance with the organisational procedures or OEM technical manual.

8. Ensure that the railway infrastructure system defects and maintenance records are properly documented and updated in the Maintenance Tracking System.

9. Assist supervisor to conduct training as required.

10. Perform Possession Master (PM) / Person-In-Charge (PIC) / ground shunter duty, as assigned by supervisors. (Training and qualifications will be provided by company).

11. Operate company forklift and/or aerial work platform, as assigned by supervisors. (Training and qualifications will be provided by company).

12. Drive company vehicle for the purpose of work. (For holders of Singapore Driving Licence. Familiarisation and authorisation will be provided by company).

13. Observe and report any safety concerns at the workplace.

14. Undertake any other tasks or functions that are supplementary to the performance of the works, as assigned by supervisor. (Training and qualifications will be provided by company, as required). Examples include (but not limited to):

a. Responding to emergency operations

b. Assist in the execution of projects including testing & commissioning, attendance to contractors, etc

c. Supervise contractors' work

d. Preparation of reports

e. Provide logistics support

f. Housekeeping

Physical Requirement

1. Able to work on a Shift Roster system in accordance with the MOM guidelines and Collective Agreement.

2. Able to work in harsh environment with present of dust, oil, grease etc.

3. Able to work at height.

4. Able to climb staircase ladders, work undercarriage in limited space, squat and stand for long duration up to 4-6hours.

5. Able to lift, carry and install heavy tools/equipment up to 15kg.

Qualifications and Work Experience

1. Higher NITEC in Electrical Engineering, Electronics Engineering, or equivalent

2. Preferably 2 years’ experience in a maintenance environment

Responsibilities

⦁ Partner with Advanced Infra Services' Sales Specialist and Account team in building pipeline through consultative selling approach, driving net new business opportunities within the existing regional account base as well as supporting client acquisition activities.

⦁ Take lead and/or work as part of a team with other functional teams to review overall solution taking into consideration the deliverable aspects as well.

⦁ Supports the Sales Team by providing views and input which is relevant to pricing considerations and provides the necessary technical proposal.

⦁ Architect the technical solution in response to customer requirements.

⦁ Supports technical representation in Bid Management and Review process.

⦁ Keeping abreast of market trends and product & competitor landscapes

⦁ Conducts enablement / client briefing on relevant solution to both clients & internal teams.

Requirements

⦁ Relevant technical certifications (eg. CISSP, CISM, CompTia Sec+, CEH, etc) with at least 8 years experience within the industry,

⦁ Familiar with architecture within security domains. e.g. PAM, endpoint protection, data protection/governance, threat prevention, SASE, DLP, SIEM etc.

⦁ Strong understanding of security architectures, solutions, processes, frameworks, and components

⦁ Incident response including security monitoring, network and endpoint visibility, threat management, and forensics is a plus

⦁ Knowledge in information security technologies & cyber threat actors, cyber-crimes and fraudulent activity targeting the technology or various industries

⦁ Familiar with PDPA, GDPR regulatory requirements and compliance standards in the ASEAN region (i.e. SG, MY, etc)

⦁ Business acumen, able to communicate effectively with all level of stakeholders

⦁ Able to adapt to a dynamic and fast-pace environment

RESPONSIBILITIES & DUTIES:

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

QUALIFICATIONS & REQUIREMENTS:

• Min. 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Any interested candicate please forward your resume to [email protected].

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Bloomberg ignites the power of information and technology to bring clarity to a sophisticated world. A global financial information and news leader that provides influential decision makers a critical edge by connecting them to a dynamic network of information, people and ideas. The company delivers data, news and analytics through innovative technology and provides real time financial information to more than 325,000 subscribers globally.

What’s the role?

Bloomberg Technical Support is responsible for deploying and supporting Bloomberg’s variety of products and services. This high-profile role requires experience across general technical areas pertaining to hardware, software and networking, in addition to experience with coordinating the implementation of technology solutions.

The Technical Support team is seeking a qualified individual to provide leadership and direction to the team in Singapore. You will possess a strong customer focus, passion for leadership and high interest in technology. In addition, you have good attention to detail with excellent coaching and communication skills. You will work closely with a range of stakeholders to deliver access to the Bloomberg infrastructure while meeting our clients’ connectivity needs.

As a confident and well-organized communicator you will also be responsible for handling key accounts, regularly liaising with market data and technology personnel, as well as telecommunication providers, service vendors, and partner with a variety of internal stakeholders to ensure the highest quality of service to our customers.

You will work towards developing a collaborative team environment that fosters creativity and places a high value on providing quality customer service and technical support. Striving for excellence in both team productivity and customer happiness is at the heart of this position. You will be responsible for the hiring, on-boarding, evaluation and continued development of your team members.

We'll trust you to:

• Maintain quality relationships with your team on both a group and individual level
• Ensure that your team's performance is on track to meet departmental goals across multiple metric categories such as productivity and quality
• Provide tailored coaching that improves individual productivity and performance
• Empower your team to innovate and challenge traditional thinking on how to best tackle clients' technical issues
• Establish strong global & interdepartmental relationships and strategies to make valuable contributions to the business
• Build and drive strategies for your team that aligns with the department and business goals in the region
• Be involved in recruiting, hiring, and identifying candidates with potential to be successful at the role

You'll need to have:

• Minimum 3 years of working experience in technical support or a similar role that engages with internal or external clients in a technical capacity
• Minimum 1 year of experience in leadership, mentoring, coaching or training
• Business proficiency and fluency in Mandarin to support Chinese-speaking clients
• Excellent written and verbal communication skill in English
• Demonstrated people management, project management and change management skills
• Extraordinary level of customer service and a good understanding about our business
• Experience managing workflow or projects for our product and its technical area (software, connectivity, data, etc.)
• Strong stakeholder management skill, including networking and communication skills
• Experience working in a global, team-oriented, and collaborative environment
• Ability to quickly prioritize and take appropriate actions in handling escalated cases
• Strong interest in learning Bloomberg products and its technical concept and architecture
• Demonstrated continuous career growth within an organisation
• Bachelor’s degree or degree-equivalent qualifications

We'd love to see:

• Experience and knowledge of our product implementation workflow including the installation, relocation, and removal of new Terminals, routers, and circuits
• Experience and knowledge in troubleshooting client issues related to the Bloomberg software, hardware, SFTP, FIX and API products
• Experience and knowledge of PC hardware, operating systems and software suites
• Knowledge of networks with an understanding of but not limited to IP addressing, sub-netting, routing and Secure File Transfer Protocol

If this sounds like you:

Apply if you think we’re a good match. We’ll get in touch with you to let you know the next steps but in the meantime feel free to browse this: http://www.bloomberg.com/professional