Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs.
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market.

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information.

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies.

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus.

Key Responsibilities

• Serve as part of our Global TKM Operations & New Business Readiness Team, with primary purpose of leading program management of new TKM startups w/in APAC. Candidate will act as liaison between Spares Business Unit, Field Service, Planning, Logistics & Operations and be responsible for operating independently, driving meetings, meeting milestones and progress reporting.
• Ensures that specific project and program objectives are defined for areas of responsibility, and that necessary preliminary activities (e.g., determination of outcomes, milestones, viability studies, and resource planning, among others) are completed to allow for effectiveness and focus during later stages of completion.
• Ensures that all projects and programs assigned are completed in accordance with predetermined requirements, with specific attention to product/process specifications, project/program costs, resource utilization, and timeliness for completion.
• Ensures that all phases of project, program, and/or process development are documented and that information required in other functional areas is reported, disseminated, or transferred, as appropriate. Ensures compliance with Company policies regarding Engineering/Lab notebooks, patents, confidentiality, and safety.
• Ensures that the utilization of all material and financial resources is carried out in an effective manner.
• Effectively work with other staff to maximize productivity for the project/program.
• Spearheads research and development of new technologies, as appropriate, and ensures that newly created processes, designs, and/or methodologies are incorporated into Applied Materials products/services, and/or disseminated to other areas as needed.

Requirements

• A bachelor's degree is required. Master of Business Administration (MBA) is a plus.
• 3-10 years of project management experience and familiar with business cycles.
• Proven record as a facilitator to drive/manage different functional stakeholders to meet the project's goal.
• Supply chain-related experience is a plus.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines and auxiliary power units. The company offers a well-balanced portfolio of engines for next generation fighters and commercial aircraft, and leads the industry with our game-changing PurePower® family of engines and patented Geared Turbofan™ technology. Today, we are an established aviation player in Asia Pacific, with more than 30 years of presence in the region. We manufacture engine parts including components for PurePower® engines, as well as operate businesses that provide aircraft engines and parts repair and overhaul.

Responsibilities:

• Lead and supervise repair cell; group leaders, technicians and repair specialists, to meet cell targets and goals for quality and on-time delivery.
• Assist manager in production and overtime schedules and procedures, as well as support cell leader on manpower and resources planning.
• Implement management tools to track production activities, material flow and inventory used by the cells to achieve cost, quality and delivery targets.
• Develop & maintain adequate repair process control to achieve consistent quality products.
• Track production and repair yield and quality targets set by management.
• Enhance current repair procedures & improve process robustness & output, through process improvement and standard work.
• Work with the various business functions such as Engineering, Quality, HR, ROCs and Materials to achieve department objectives and company’s goals
• Actively engage and participate in company initiatives such as Customer Oriented Results and Excellence (CORE), Technology & Automation and Lean manufacturing activities
• Support capacity ramp up initiatives through workforce hiring, planned skills training, resource scheduling and development programs.
• Assist the Department Manager in performance reviews on a regular basis in order to facilitate or maintain a high operating efficiency for the repair cells
• Develop potential talent in pipeline and champion employee development to ensure repair team stability and continuity.
• Carry out any other duties as assigned by the Department Manager

Requirements:

• Diploma in Mechanical/Aeronautical/Production Engineering with 3 years of relevant aviation experience
• Experience in aircraft engine workshop practices and maintenance & repair work process will be advantageous.
• Ability to perform basic machining on components using the Lathe, Milling, Jig Bore, EDM and Grinding machines will be advantageous.
• Ability to perform basic bench repair on components will be advantageous.
• Good working knowledge of MS Office software (Word, Excel, Access and PowerPoint)
• Analytical with strong leadership and supervisory skills
• Highly motivated with a strong drive for success
• Good team player with strong communications and interpersonal skills

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”.

• Be part of Technical team responsible for maintaining and ensuring the serviceability of all systems and equipment at Inflight Catering Centre (ICC) 1 & 2
• Be technically proficient in all aspects of maintaining, repairing and troubleshooting the full range of ICC systems and equipment (e.g. warehouse systems, material handling and automation systems, refrigeration systems, kitchen equipment, packaging and inspection machines, washing machines, waste management systems, etc.) and other technical related knowledge
• Manage, perform and ensure all maintenance activities and repair works are timely follow-through according to the assignment, maintenance schedule, procedures, checklists, manufacturer recommendation and completed within the timeframe
• Manage, perform and ensure all technical purchase requisition of spare parts, contracts and services are in accordance to the Company policies and follow-through to support the maintenance activities
• Manage, communicate and work professionally with all stakeholders to minimize systems and equipment downtime
• Be proactive in resolving technical faults, contributing initiatives and continuous improvements
• Always observe and follow all Safe Work Procedures and Food Safety requirements
• Always ensure Safe Work environment by housekeeping of all work areas and report any safety hazards immediately
• Perform and support other relevant duties and projects assignments if required

Job Description

Key Responsibilities

1. Complete definition and design of complex components, modules and sub systems. Contribute to the system engineering specification both within the field of one's expertise and broadening into other disciplines. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand sub system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a subsystem.
2. Conduct detailed engineering analysis of sub systems using vast knowledge of design concepts and functional requirements pertaining to field of technical expertise and broadening into other disciplines. Assist in creating concepts for architectural design approaches. Evaluate architectures to provide recommendation for best system solution approach.
3. Build and qualify prototypes of new designs, or procure entire subsystems from outsourced suppliers and test for compliance with detailed specifications
4. Problem identification and troubleshooting a variety of difficult engineering problems in field of technical expertise, including serviceability and manufacturability.
5. Support System Integration during the assembly and final testing of new product designs.
6. Perform and coordinate tests as per internal as well as industry-accepted reliability specifications. Make suitable design or operational changes as required.
7. Support system engineering projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design, and understand the underlying system implications.
8. Provide remote and onsite support to field support personnel as required.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Responsibilities:

· Provide sales and administrative support to sales team.

· Handling of sales enquiries.

· Manages shipment and receipt of products, materials, and supplies.

· Asist in sourcing materials, goods, products, and services.

· Prepare sales quotations and service reports.

· Keep track of timelines for submission and completion of sales reports.

· Prepare power point slides for presentation.

Requirements

· Min ITE. Fresh graduates arewelcome.

· Proficient in MSoffice.

· Confident & self-motivated with good communication & interpersonal skills.

· Ability to work in a fast-paced environment, multitask and manage work priorities in a pro-active and flexible

manner.

· Ability to meet tight deadlines.

· Prior shipping experience is added advantage.

· Prior sales experience is added advantage.

· Singaporean.

Job Responsibilities

As a Piping Design Engineer (Drafting) specializing in piping projects, you will be responsible for designing, drafting, and optimizing piping systems within manufacturing facilities. You will work closely with project managers and engineers, and other stakeholders to ensure that piping designs meet regulatory requirements, safety standards, and project specifications. Your role will involve creating detailed drawings, including IFC shop drawings, conducting analysis, and coordinating with multidisciplinary teams to deliver high-quality piping solutions.

Job Requirements:

· Proficient in using CAD software, such as AutoCAD and Plant3D, Inventor, Revit

· Prepare technical drawings, including piping isometrics, 3D/BIM model

· Minimum Diploma in Mechanical Engineering

· 2 to 3 years relevant working experience piping design & drafting

· Experience in pharmaceutical piping design & drafting would be desirable

Working Location:

8 Loyang Crescent Singapore 509016 (head office)

Construction worksites around Singapore (including Tuas)

Responsibility

· Provide IT support and perform initial troubleshooting or escalate to our outsourced IT specialists for complicated cases, or provide alternatives to resolves the cases.

· Support HQ and project sites regarding IT-related issues.

· Monitor and maintain in-house networks and servers.

· Manage and maintain computer hardware and software systems, Inventory, and deployment to users.

· Upgrade, install and configure new hardware and software to meet company objectives.

· Create user accounts and set up email accounts for new staff.

· Perform diagnostic tests and debugging procedures to optimize computer systems.

· Document processes, as well as backing up and archiving data.

· Develop data retrieval and recovery procedures.

· Perform any ad-hoc assignment as instructed by superiors.

Requirements

· ITE, Diploma or Higher qualification in computer science, information technology, information systems, or related fields.

· Preferable with at least 1-2 years of relevant working experience in a similar role.

· Responsible, meticulous, fast learner.

Job Scope:

As an IT Admin Staff your primary responsibility is to support the IT team in maintaining a smooth and efficient IT environment. You will be part of our dynamic IT team, assisting in the management and maintenance of our organization's network infrastructure. Here is a simplified breakdown of your key tasks:

1. Administrative Support:

Assist the IT Administrator/IT Manager with daily administrative tasks.

Keep track of IT inventory, including hardware and software licenses.

Help with procurement processes by reviewing vendor and preparing purchase orders and tracking deliveries.

Manage and organize IT-related documentation, such as manuals and user guides.

Assist in data entry and data cleaning.

2. User Support:

Assist with setting up user accounts and access permissions.

Aid in onboarding new employees with IT resources.

3. Maintenance and Monitoring:

Perform routine checks on IT equipment and report issues.

Assist with maintaining backups and monitoring system performance.

4. Security and Compliance:

Assist in enforcing IT security policies and practices.

Promote cybersecurity awareness among colleagues.

Follow data protection measures and user access controls.

5. Documentation and Reporting:

Keep detailed records of IT activities, incidents, and resolutions.

Assist in creating reports on IT performance and usage.

Qualifications:

• High school diploma or equivalent; IT certifications or relevant coursework a plus.
• Strong organizational skills and attention to detail.
• Basic knowledge of computer hardware, software, and operating systems.
• Good communication and teamwork skills.
• Willingness to learn and adapt to new technologies and processes.

Job Description

• Perform water and lavatory servicing to all types of aircraft.
• Provide and operate full ground support equipment such as ground power units, air-start, air conditioning units and Brake Cooling Unit.
• Operate Conventionally and Towbarless Airtug for Pushback and Towing on all types of aircraft.
• Performs Equipment preventative and routine inspection.
• Carry out other duties associated with aircraft water/lavatory systems and full ground support equipment.

Requirements

• Minimum Nitec/ Diploma in Engineering or equivalent
• 1-3 years of relevant working experience in aviation or related industries
• Possess LTA Class 3 driving license
• Able to perform 12 hours rotating shift work arrangement

Job Responsibilities:

• Basic data entry (SAP system)
• Picking, packing, stock taking and inventory management
• Organizing and maintaining the store
• Issuing/Receiving aircraft spare parts and tools

Job Requirements:

• Minimum 'O' Level with 1 - 2 years experience in warehouse / logistics
• Must be comfortable to perform rotating shift-work
• Basic computer skill required
• Experience in SAP will be highly advantage
• Class 3 /Forklift driving license will be an advantage

Job Responsibilities:

• Prepare work packages and ensure spare availability prior to work commencement.
• Prepare work packages and provide support to technical crew.
• Liaise with technical crew and various departments to ensure smooth and timely completion of planned tasks.
• Perform data input and analysis.
• Plan and track monthly programs for completion.
• Answer customer queries.
• Any other duties required

Job Requirements:

• Minimum Higher Nitec / Diploma holder in Engineering/Automotive/Aerospace/Transport/Business
• Comfortable with 12 hours rotating shift
• Proficient in Microsoft Word, Excel and PowerPoint
• Good communication and interpersonal skills

• Work on electrical/electronic system for product design, design verification and validation activities.
• Participate in solving electronics and software/firmware related problems.
• Generate product documentation such as specifications, risk assessment, test protocols and reports that contribute to the Design History File.
• Involve in design review to ensure the product is designed for testability and manufacturability.
• Develop test fixtures/jigs and test program with R&D and manufacturing teams.
• Provide engineering support for manufacturing and test systems in production.
• Work closely with a multidisciplinary team on design verification, manufacturability, quality and reliability.
• Provide technical ownership for product design aspects for developmental and commercial products throughout their entire lifecycle.
• Resolve technical problems by working closely with internal and external stakeholders.
• Propose solutions for technical problems using systematic problem-solving methodologies and engineering principles.
• Follow Design Control for medical devices to ensure compliance with the company’s Quality Management System and ISO 13485.

Education

· Min Degree in Electronic Engineering or related field.

Experience

· Preferably to have minimum of 3 years professional experience working on electrical/electronic product development and related activities.

· Working experience in product design, design Verification and debugging.

· Candidates with more relevant work experience or expertise might be considered for a senior level position.

· Strong understand of product testing, troubleshooting and test fixture development.

· Experience with electronics hardware design, review, verification and troubleshooting.

· Experience in testing electrical and electronic systems, PCBAs and hand-on experience in configuring equipment (oscilloscope, spectrum analyzer, safety tester, etc.) is a plus.

· Experience with PCB design software (e.g., PADS, Altium Designer) is preferred.

· Experience with EMC and safety regulatory certifications is a plus.

· Experience with IEC60601/IEC61010 is a plus.

Skills

· Good knowledge in power, microprocessor, PCBA, high speed signals designs.

· Strong knowledge of technical standards related to video and electrical safety.

· Outstanding communicator with strong troubleshooting skills.

· Excellent documentation writing skills.

Key Responsibilities

1. Understand, research, and resolve internal and external application and systems issues.
2. Create, test, and verify installation/upgrade instructions for Applied Materials’ product releases.
3. Participate in product testing, documentation reviews, and user conferences.
4. Provide off-hours customer support via pager and cellular telephone as scheduled. Provide telephone coverage as scheduled.
5. Attend Applied Materials’ classes in designated product line and external classes for third-party software.
6. Provide on-going training to customers for technical and systems issues.
7. Deliver updates and reports to managers, partners and peers

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Key Roles and Responsibilities

· · Software development and coding - write, modify, and debug software for various applications.

· Update and maintain existing software applications to address evolving user requirements, resolve bugs, and enhance performance.

· Perform software unit test based on white box testing, integration and system test based on black box testing.

· Develops and implements software testing protocols to validate product quality and functionality.

· Supports the development, modification, and execution of software test plans.

· Maintains design specification and technical documentation during Product Life Cycle

· Support Software hazard analysis, FMEA and risk analysis for any software design changes.

· Perform other ad-hoc duties as assigned by immediate supervisor.

Requirements

Education

· Min Degree in Computer Science, Engineering, or other related technical degree.

Experience

· Proficiency in one or more programming languages relevant to the job (e.g., C++,Java, Python).

· Familiarity with the principles of IEC 62304

· Familiarity with version control systems, such as Git

· Proficiency in various testing techniques, including manual testing, automated testing, regression testing, and performance testing.

Familiarity with FPGA development tools would be advantageous

Skills

· Strong understanding of software development principles, practices, and methodologies.

· Knowledge of software design patterns, architectural principles, and system design.

· Proficient coding skills and experience in debugging and troubleshooting.

· Ability to develop test plans, test cases, and testing strategies based on software requirements and specifications.

· Strong communication skills and the ability to work effectively in a team environment.

Awareness of and adherence to security best practices in software development.

Job Description

Key Responsibilities

• Develops code and documentation for a variety of difficult software projects, and design and implement bug fixes.
• Designs a variety of difficult software projects.
• Defines software specifications.
• Interfaces with internal customers for requirements analysis and schedule.
• Troubleshoots a variety of difficult software problems.
• Performs software tests on code and enhancements.
• Interfaces with external customers regarding software issues.
• Compiles data for regularly scheduled or special reports, analysis and statements.

Requirements

• Bachelor's degree in Computer Engineering, Software Engineering, Computer Science or equivalent
• Have experience in C++, C#, Python and object-oriented programming
• Expected in business travel
• Vision algorithm, machine language and automation skill preferred
• Ability to speak Mandarin would be an additional advantage in order to liaise with Chinese-speaking counterparts

Job Description

Key Responsibilities

• Design, collect data, analyze and compile reports on a variety of difficult CVD process engineering experiments, within safety guidelines
• Perform CVD hardware characterization on a variety of difficult systems, within safety guidelines
• Troubleshoot a variety of complex problems, perform Root Cause Analysis and resolve a variety of difficult process engineering issues
• Generate internal and external documentation for products, presentations and technical reports
• Interact with customers to resolve a variety of difficult process engineering issues/problems with limited supervision
• Measure film properties and interpret data
• Identify, select and work with vendors and suppliers with limited supervision
• Implement new technology, products and analytical instrumentation

Requirements:

• PhD/ Master Degree in relevant Engineering/ Science/ Physics studies
• At least 5 years of relevant working experiences in semiconductor process development
• Prior experience with CVD technology is highly desirable
• Ability to work in cleanroom/ lab environment
• Resourceful, meticulous and problem-solving attitude

Job Description

Key Responsibilities

1. Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.
2. Uses escalation policies as required to keep management informed of down situations.
3. Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.
4. Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.
5. Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.
6. Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.
7. Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.
8. Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Roles & Responsibilities

• Provide operational support in maintaining processes in SAP B1, Crystal Reports, and Power BI to increase productivity.
• Offer cause-analysis of IT related problems, including recommending cost-effective solutions.
• Lead integration of company’s software with SAP B1.
• Manage IT infrastructure, implementation, integration and security.
• Manage all IT assets (computers and servers).
• Design, develop and implement systems, policies and procedures for IT department and ensure alignment with Company’s policy to meet business and user needs.
• Ensure the security of data, network access and backup systems.
• Continuously analyses current process, technologies, and vendors to identify areas of improvement.
• Train employees on both software and hardware, assist to troubleshoot, and provide technical support when needed.
• Source and evaluate IT Vendors.
• Project management role in managing project scopes. Ensuring business requirements are translated into technical requirements and meeting completion timelines.
• Design and develop disaster recovery plan.
• Any other ad-hoc responsibilities assigned

Qualification & Experience

• Diploma or Degree in IT, Computer Science, or equivalent.
• At least 3 years of relevant experience, preferably with knowledge in SAP processes.
• Possess strong troubleshooting and good problem-solving IT skills in relation to diagnosing and solving both technical hardware/software faults.
• Preferably with work knowledge on SAP B1 SDK or C# web database programming
• Work Knowledge on MS SQL and MySQL (Stored procedure)

Preferred Skills

• Good Interpersonal relationships and observing discretion for sensitive data and information
• Ability to communicate at all levels
• Good analytical and problem-solving skills
• Adaptability and flexibility
• Highly motivated and hardworking with positive attitude

Job Description

Key Responsibilities

• Design, collect data, analyze and compile reports on a variety of difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on a variety of difficult systems, within safety guidelines
• Troubleshoot a variety of complex problems, perform Root Cause Analysis and resolve a variety of difficult process engineering issues
• Generate internal and external documentation for products, presentations and technical reports
• Interact with customers to resolve a variety of difficult process engineering issues/problems with limited supervision
• Measure film properties and interpret data
• Identify, select and work with vendors and suppliers with limited supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Bachelor Degree in Engineering or higher relevant qualifications
• Experience with PECVD technology, specifically prior process engineering experience on CVD deposition technology highly desirable
• Some understanding of Plasma technology and use in semiconductor processing preferred
• Understanding of film characterization techniques including thickness, optical parameters, stress measurement, defects etc.

Job Description

Key Responsibilities

• Provides highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems.
• When necessary, works closely with customer to optimize tool performance to meet customer process and integration requirements.
• Checks and approves operational quality of system equipment. Instructs customers in the operation and maintenance of the system.
• Knowledge of 2 or more processes on 1 or more technologies

Requirements

• Bachelor of Engineering with minimum years of experiences/ internship experiences
• Have interest and basic understanding in semiconductor industry and semiconductor chip-making processes
• Strong in stakeholder and customer management
• This role requires you to work at customer site daily (either North or East)

Job Description:

• Establish sales channels;
• Expand the customer base and maximize the market coverage;
• Promote and sell company’s range of fire protection products;
• Attend to sales enquiries and prepare sales quotation;
• Providing pre-sales technical assistance and product education;
• Assist in formulating business strategies and identify new business opportunities;
• Preparing and negotiating tender and contract terms and conditions to meet both client and company needs;
• Providing after-sales support services;
• Build & maintain good relationship with clients;
• Supporting marketing activities by attending trade shows, conferences and other marketing events;
• Making technical presentation and demonstrating how a product meets client’s needs.

Requirements:

• Diploma or Degree in Business Management or any related field
• Hardworking, proactive, self-motivated with good working attitude
• Aggressive and strong customer oriented service mentality
• Possess strong communication and interpersonal skills
• At least have 3 years of working experience

Job Description

Key Responsibilities

1. Helps to coordinates project activities. Will update matrix for process improvements.
2. Assists in the coordination of project schedule and task details Helps prepare reports and tracking charts,
3. Will track the progress of resources within the business unit to meet project on-time and budget performance objectives.
4. Prepares request for quotes (RFQ). Coordinates completion of the in-use and Final Sign-off (FSO) milestones with all parties.
5. Revises non-technical aspects of the Statement of Work (SOW).
6. May communicate with internal customers to determine progress against project objectives. Under supervision reports progress against stated objectives.

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Has the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining a neat and orderly work area. Demonstrates a positive attitude in less than optimal customer situations.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

​

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Responsibilities:

• Conduct regular inspections of facilities to identify maintenance needs, safety concerns, and operational issues.
• Develop & implement preventive maintenance programs to ensure the reliability and longevity of building systems & equipment.
• Coordinate & supervise maintenance activities, including repairs, installations and renovations.
• Manage relationships with external vendors and contractors for facility-related services.
• Implement energy-saving initiative and sustainable practices to enhance facility efficiency.
• Oversee compliance with health & safety regulations, ensuring as secure work environments for all occupants.
• Plan & execute emergency responses procedures, including evacuation plans and disaster recovery.
• Maintain accurate records of facility maintenance activities, expenses, and equipment performance.
• Collaborate with cross-functional teams to support space planning, office relocations, and facility expansions.
• Monitor and manage budgets related to facilities maintenance and improvement projects.
• To perform other tasks as may be assigned by the Head of Facilities Management Department.

Requirements:

• Bachelor's degree in Facilities Management, Engineering, or a related field.
• Proven experience in facilities management, preferably in a corporate or industry setting.
• Proven experience of minimum 3-year in similar field or related industry.
• Strong knowledge of building systems, HVAC, plumbing, electrical, and fire protection systems.
• Familiarity with local building codes, regulations, and safety standards.
• Good project management and organizational skills.
• Ability to analyze complex issues and provide effective solutions.
• Strong communication and interpersonal skills for effective collaboration with internal teams, vendors ,and contractors.
• Understanding of sustainability practices and green building concepts is a plus.
• Responsible for any other ad hoc duties assigned.
• Important to have a can-do attitude, willingness to self-learn and guide others.