IT SECURITY engineer

We are a leading Regional IT and Cyber Security system integrator headquartered in Singapore with a presence in Malaysia & the Philippines. We are hiring talented individuals with a positive attitude to join us. We run SOC, a cybersecurity consultancy, and other professional services to local and regional customers.

Primary Functions:

· Responsible for providing technical assistance and support related to computer systems, hardware, or software

· Responds to queries, run diagnostic programs, isolate the problem, and determines and implements a solution

· To ensure that clients get prompt and quality service

· To document troubleshooting and problem-resolution steps

· To participate and provide knowledge transfer to customers when necessary

· Professional services implementation including but not limited to Linux, Wintel Server, Networking, CyberSecurity project implementation

· Create training manuals, documentation, and knowledge transfer documents

· Install and modify computer & Infrastructure based on in-house best practices

· To implement security control on the system and network devices

· Follow up with customers to ensure the issue has been resolved

· Provide technical assistance and support for queries and issues related to computer systems, Local area network (LAN), Wide area network (WAN), and other hardware/software via phone, email, and/or onsite according to stipulated SLA

Requirements and Skills:

· Diploma holder in IT and other IT Security certifications will be a plus

· Minimum 1-year experience in IT

· Fresh graduates are welcome as we will provide relevant training

· A good understanding of IT network, data storage, network, Wintel Server

· Resourceful, creative, independent, and able to work well in a team

· Required to work on-site when necessary

· Taking ownership of technical issues and working with customers and partners to resolve more advanced issues when necessary.

· Good written and verbal skills; excellent phone and email manners.

· Understanding of TCP/IP, OSI Layer, network security, Internet, DNS, network routing, switching, SMTP email, Linux, and Microsoft Windows

Other Information:

· Office Location: 67 Ayer Rajah Crescent #02-10 S139950

· Working hours: Mon-Friday, 9 am-6 pm

· Depending on the season and customer request may require to work outside working hours

· Monthly basic salary commensurate with qualifications and experiences

· Other benefits such as annual leave, medical, insurance, training opportunities, regional exposures, etc

· Additional performance bonus based on individual contribution towards company strategy and its financial performance

Contact: [email protected]

Job Description

The Applications Development Engineer role is within the product division that designs and manufactures inspection and review equipment for the semiconductor manufacturing industry. Based in Singapore, the Applications Engineer will be responsible for product penetration/adoption and process optimization at customer facilities in fabs.

This includes gaining expertise on KLA equipment and customers’ semiconductor fabrication processes and applying them to solve critically important production problems.

The role also includes training customers and other applications engineers, handling/driving local applications issue processes, investigating customer technical needs/problems and providing solutions, conducting final acceptance, demonstrating products, and understanding competitive situations, methodology, and performance group analysis.

Characterization of new systems and features includes crafting and conducting experiments, collecting data, and publishing results and recommendations in the form of application notes, best-known methods, or

characterization studies.

Minimum Qualifications

• Minimum Bachelor's Level Degree in Engineering and related work experience of 8 years.
• Work experience in semiconductor processing or the equipment industry is preferred.
• This role requires up to 70% travel on short notice, including extensive international travel and working with other global cultures.
• Teamwork is critical, so having a good balance between technical skills and people skills is important.

Assurity Trusted Solutions (ATS) is a wholly-owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

Middleware Administration

• Responsible for providing technical services to support environment provisioning, software integration and projects from deployment planning, setup & testing, pre-production readiness to production cutover;
• Hands-on experience on Middleware technologies such as Webserver Apache, IIS, WebLogic, JAVA & .NET based Application server, SSO server, Scheduling and Enterprise Backup;
• Responsible for software upgrades and patching ensuring that the platforms are performing to their potential & meet security compliance;
• Collaborate with Cyber Security and identify solutions for remediation of vulnerabilities in the web and middleware infrastructure;
• Developing and maintaining infrastructure/process logs, documentation, process metrics and capacity trending will be part of the daily activities;
• Participate in 24/7 support by acting as an escalation point for any production issues;
• Responsible for monitoring and optimizing the performance of middleware systems. This may involve diagnosing and resolving issues related to scalability, throughput, latency, and overall system efficiency.
• Work closely with developers, system administrators, and other stakeholders to understand their requirements and provide technical support;
• Stay current with trends and incorporate emerging technology to benefit the platform for on premise and cloud solutions;

Requirements

• At least 3-5 years of Middleware support experience, preferably in large-scale government projects;
• Candidate with strong infrastructure/technical background with knowledge on message-oriented applications in cloud-native architecture will have an advantage;
• Strong understanding of high-availability architectures. Hands-on experience in Clustering, Load Balancing and failover management;
• Work under minimal supervision and take ownership of middleware incidents end to end
• A good working knowledge in UNIX-platform based Web-App administration is a must;
• Good verbal and written communication skills.
• Strong analytical and problem solving skills.
• Good interpersonal and team management skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

• Recognised degree in civil engineering, construction management or related field.
• Minimum 5 years of experience in construction planning and preferably in MRT or large scale infrastructure projects.
• Profeciency in construction progress planning, data analysis and using BIM software such as Primavera P6, AutoCAD, Navisworks, Power BI & etc.
• Strong understanding and knowledge of tunnelling and underground construction and cut and cover technigues.
• Proven ability to analyse critical paths, manage project timelines and adapt plan effectively.
• Monitor project progress and adjust plans as necessary to mitigate risks and meet deadlines.
• Preparation of progress reports by forecasting and identifying delays and bottlenecks.
• Familiarity with ERSS walls, pile extraction, contaminated ground, railway protection requirement, WSM and large diameter bored tunnels.
• Able to work under pressure and manage multiple priorities.
• Applicants are required to submit their detailed CV and indicate the current and expected salary.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

In this role you will be accountable for:

• Design and conduct bench-scale test and pilot testing related to the company's separation process technology. Some tests may required rotating shift schedule.
• Develop and review validation protocols for bench-scale test and pilot testing
• Investigate and resolve discrepancies identified during bench-scale test and pilot testing
• Collaborate with process engineers to develop new technologies and improve existing ones
• Work with the sales team to develop commercialization strategies for new technologies
• Stay up-to-date with industry trends and emerging technologies related to separation processes

To succeed in this role, you will need:

• Degree in Chemical engineering, Biochemical engineering, Environmental engineering or related fields
• 2 to 5 years of analytical testing experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• Knowledge of separation processes such as distillation, liquid-Liquid extraction, and crystallization.
• Experience designing and conducting bench-scale tests and pilot testing, as well as experience developing and reviewing validation protocols is an advantage.
• Basic knowledge and experience in analytical chemistry, including experience with various analytical equipment is an advantage.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• With process engineering background are welcome to apply.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

Project Overview

The AMR IRG is an interdisciplinary community of biologists, engineers, and clinicians from MIT and Singapore, sharing a state-of-the art research facility and united by a commitment to providing a supportive intellectual environment where students and staff can learn, grow, and contribute to solving a pressing societal problem.

The objective of this project is to advance the field of RNA analysis by developing and implementing innovative analytical tools. These tools will be used in a comprehensive study of all forms of RNA -- the ribonucleome -- and the >170 RNA modifications -- the epitranscriptome -- in disease pathobiology, host-pathogen interactions, biomarker development, and therapeutic target discovery.

Responsibilities

The Research Engineer will plan and conduct experiments with the aim of studying the roles of RNA modifications in human immunue diseases. The candidate will work primarily on cell culture, RNA isolation, and chromatography-coupled mass spectrometry analysis. As part of this work, the candidate will prepare results for publication, be a liasion with the AMR IRG community, work with external collaborators, and develop strong experimental and communication skills.

Requirements

• B.S. or M.S. in biochemistry, molecular & cell biology, bioengineering, chemical engineering, or a related field.
• Experience in cell culture, RNA extraction, high-performance liquid chromatography or mass spectrometry are prefered. Strong proficiency in oral and written communication in English. Ability to work well with others and as part of a team.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notifie

Responsibilities:

• Performs the set-up, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies
• Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams.
• Tests and troubleshoots assemblies and/or final systems. May complete rework on assemblies and/or systems as a result of testing.
• Prepares technical reports summarizing findings and recommending solutions to technical problems.
• May assist in the selection and set-up of specialized test equipment.

Requirements:

• Diploma or Bachelor Degree in Engineering.
• Ability to read technical drawings/procedures and use a variety of precision testing and measuring instruments.
• Previous hands-on experience with semiconductor equipment
• Experience with optics alignment will be adventagous
• Strong troubleshooting and analytical skills to resolve technical problems, set up experiments, and perform data analysis.
• Excellent communication, teamwork, and people skills are required.
• Comfortable working in shifts and cleanroom environment

Position Summary:

This is for the Central Patch Management Service under the Systems Technologies which focuses on using BigFix for patch deployment, compliance, and reporting.

Roles And Responsibilities:

• Oversees the entire operation and understands how to use the tools & reports.
• In charge of the BigFix infrastructure, including servers, relays, SQL and updating of the software infrastructure.
• Control access to BigFix components.
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks related to patch management.
• Develops custom reports for stakeholders.
• Setting up content for distribution to endpoints.
• Creates baselines, writes custom fixlets and analysis.
• Develop and maintain groups inside of BigFix.

Requirements / Qualifications:

• Minimum Bachelor's Degree or Professional Degree in Computer Science / Information Technology or equivalent.
• Proficient in BigFix architecture or SCCM
• Minimum 5 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating complex incidents and deep underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities.

# Risk Management & Project Management

# Network Migrations - LAN & WAN, Network security

# Experience in Data Centre Project

Job Description:

• Plan and execute data centre migration
• Oversee procurement of new servers and network equipment
• Manage data migration and verification processes
• Set up new Server Room compliant with Green Book standard
• Other ad-hoc tasks assigned
• 
  
• Diploma/Degree Holder and above
• At least 5 years of experience of handling ICT projects such as DC relocation etc
• Relevant IT certifications (eg. ITIL, CISSP, PMP) preferred

Send your cv to [email protected]

As an Manufacturing Central Team Assembly and Test Automation Project Engineer Automation Project Engineer, you are member of the Global Operations Team responsible for the worldwide portfolio of Automation projects aligned to Assembly and Test Operations objectives and corporate strategies and initiatives. You will develop, facilitate, and/or lead data-driven program management capabilities during Initiation, planning, and execution phases. You will identify risks early, manage issues, and drive initiatives to closure.

Job Responsibilities

• Collaborate with network teams - site automation, central/ site Process and Equipment Engineering, procurement, safety EHS in managing the automation projects
• Identify Project partners and manage expectations
• Identify and manage program projects dependencies
• Collect and document partner requirements
• Identify and resolve issues and conflicts
• Control project scope
• Communicate project expectations to team members and partners
• Coach, mentor, motivate, supervise, and provide recognition for projects
• Maintain project support through interaction with senior leaders
• Promote Program Management value and business practices to the organization
• Develop and deliver progress reports, proposals, requirements documentation, and presentations
• Identify potential crises, and develop and implement resolution plans
• Facilitate transition of system and business processes from project closure to long term sustainment
• Follows Company/Department Policies and Group expectations.
• Maintains a clean and safe working environment by proactively assessing the work (and surrounding) area and submitting work orders as needed.
• Recognizes and reacts to safety alarms (EES, fire alarm, MDA, etc.)
  Remains within Micron’s attendance policy.
• Displays a positive attitude toward Micron and its policies
  Holds self and other team members accountable for adherence to all company-wide safety procedures (PPE, EIPS).
• Observe all established EHS policies, requirements, and procedures.
• Understand and follow EHS guidelines included in work instructions.

Requirements:

- Bachelor's in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.

- Minimum 3 years working experience in engineering semiconductor project management field

- Strong verbal and written communication skills

- Capability to lead teams and manage project team members

- Project Management Certifications are preferred

- Knowledge in automation, semiconductor process and systems are beneficial

- Experiences in supporting and leading global teams/projects

As a Metrology/ Real-Time Defect Analysis (RDA) Engineer in MSB, you have the opportunity to work with a multi-functional team from different areas of the plant/ process areas to understand their tools and processes so as to create measurement recipes that can provide quick and accurate feedback on the product integrity, thus ensuring quality output. As technology advances, you will be constantly challenged with the need to innovate for newer, faster and better modes of monitoring. You will collaborate closely with vendors to explore best known methods to maintain high tool performance and embark on possible ways of cost reduction to ensure our product retains its competitiveness in the market. Additionally, you are required to work in both clean/non-clean room environment

Enable production Metro/RDA needs.

• Provide first level of support for engineering requests, recipe maintenance, tool recovery and basic troubleshooting of tool issues
• Set daily priorities and enable efficient communication.
• Schedule and perform preventive maintenance on assigned tool sets
• Ensure all Special Work Requests (SWRs) are processed correctly and in a timely manner
• Optimize tool maintenance schedules and utilization
• Resolve sampling strategy to meet business requirement

Ensure all Metro/RDA tool meet measurement and inspection standards.

• Set up tool qualification criteria, implement, supervising through SPC.
• Make decisions on how to address tools and products that are out of control for established SPC rules for both process and defect related issues
• Develop and handle projects designed to reduce cost, reduce tool measurement variability, improve availability, and find solutions to ongoing problems
• Partner with Process, Equipment Owners and vendors for equipment upgrades/enhancements to improve tool performance
• Perform periodic assessment, tool-to-tool matching and GR&R, etc. to ensure tool measurement accuracy.
• Evaluation and enable next generation tool to close metrology gaps.
• Partner with the metrology/inspection tool vendors to develop new hardware, software, and technologies.
• Perform tool evaluation and buy-off

Seek and drive methodology breakthrough to improve efficiency in metro/RDA function.

• Drive process improvement through new recipe creation that helps to provide accurate and faster feedback to the line, thereby improving the confidence level of the product.
• Participate in world-wide discussions for continuous improvement on the toolset(s) assigned across Micron sites.
• Set up processes, design and implement process monitoring, control methodologies.
• Establish business process standards, specifications and documents.
• Work with peer groups to test and vet new or continuously improve the Reaction Mechanisms and Procedures based on feedback from the end users.
• Write and publish reports that summarize projects, detection capability improvements, manufacturing productivity and cost reduction work.

Requirements:

• Bachelors in engineering/science/Statistics
• More than 2 years’ experience in Metrology/RDA in Semiconductor industry
• Knowledge of semiconductor Metrology/RDA equipment and understanding of Statistical Process Control (SPC), process control and its reaction mechanism
• Strong problem solving and critical thinking skills and able to identify root causes
• Ability to facilitate meetings and achieve cross area engagement /empower a group of people toward a common goal / work and lead team project.
• Good documentation skills with strong attention to details
• Validated strong analytical and data summary skills
• Experience in MSA (Measurement System Analysis) is an added advantage
• Experience in Python and Tableau is an added advantage
• Good communication skills

Keen on the role? Apply now!

Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

Summary:

• Basic up to 6k
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Contract Period:

• 16 January 2025 TO 15 January 2026

Deployment:

• Mondays to Thursdays: 9:00am to 6:00pm, inclusive of 30 minutes lunch break
• Fridays: 9:00am to 5:30pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays except by special arrangement with off-in-lieu provision
• Service not required on gazetted public holidays

Scope of Works:

Technical Support Officer Art:

1. To assist the art dept with acquisition of materials (receiving, DO processing of purchases, sorting and keeping purchases) as well as do paperwork for condemnation of obsolete or damaged items, carry out disposal
2. To manage maintenance and upkeep of Art rooms and resources in the Art Block (6 Art rooms and Kiln room, Woodwork room, darkroom and other related areas, including art materials and assets. E.g, Drill press, Bend Saw, 3D printers)
3. To supervise students at work when no teaching staff is around, invigilate tests and internal exams when called upon for assistance.
4. To provide support in managing the attendance of Sec 1-4 AEP Centre students and communicate with sending schools and parents on results and other admin matters
5. To oversee security of the art rooms by monitoring CCTV data, locking up rooms at 6pm.
6. To provide support and logistical assistance for department and students’ participation (Eg SYF Art Festival) and organisation of art exhibitions (Eg in 2025, Art Festival)
7. To assist in photo-documentation of students at work for purposes of T&L review
8. To oversee any repairs or renovation works being carried out (Eg Renovation of art gallery)

Music:

1. To assist the music dept with acquisition of materials and resources/instruments, repair of instruments as well as all related admin related to procurement of goods or services (receiving, DO processing of purchases, sorting and keeping purchases)
2. To assist in the maintenance and upkeep of the 5 music-learning rooms, including management of the library, cataloguing and stock taking
3. To supervise students at work on occasions when teaching staff is not around.
4. To oversee security of the art rooms by monitoring CCTV data, locking up rooms by 6pm during term time.
5. To assist in setting up for lessons in terms of instruments / computer / electronic set up
6. To assist in setting up of video cameras for practical examinations

Requirement:

• Good communication and interpersonal skills
• Good team player with a high level of initiative and independence.
• Proficient in MS Office and Excel
• Candidate with prior working experience in schools (at least in the last 2 consecutive years), directly with students.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• NOC Financial Aid & Awards - Collate applications and process submissions; schedule and host interviews; compile interview results; collate acceptance letters, process fund disbursements, collate and file post-program reports/letters to donors
• VIP Grants - Collate applications and process submissions; schedule and host interviews; compile interview results; collate acceptance letters, process fund disbursements, collate and file mid-term and final reports, recover unused funds
• NHouse - Collate and process residents’ applications; process subsidies/claims for student leaders/staff, coordinate interviews for student leader selection & staff appointments; coordinate logistics for in-house events (e.g. venue booking, procurement, event registration, etc.).
• Alumni Relations - Pre and post event support, including sending invitations and collating RSVPs, logistics coordination (e.g. venue booking, procurement, event registration, etc.).
• Data management - Maintain/assist in data entry for Alumni, Financial Aid and VIP grants (e.g. events registration lists, alumni contact updates, VIP project tracking, report generation and compilation).

This is an hourly rated position.

Qualifications

• Polytechnic diploma, “A’ levels or higher
• Proficient in MS Office suite
• Good communication skills and attention to detail
• Strong organization and planning ability
• Basic graphic design skills (e.g. for e-posters) is helpful but not a must
• Prior experience in administrative roles is preferred

Contract Period:

• From 01 Jan 2025 to 31 Dec 2025 (12 months) + Optional 2 years

Deployment:

• Mondays to Fridays: 12:30pm to 7:00pm, inclusive of 1hr meal break
• Service not required on Saturdays, Sundays and gazetted public holidays

Scope of Works:

1. Ensure that the day-to-day operation and administration of the general office and the school library is efficient and that the system, resources and equipment are well maintained, including:

• Collating of data for the college
• Administer daily student loan of laptops, uniforms, etc.
• Administer daily booking and usage of discussion rooms
• Administer student / staff information
• Organise office stores and physical library resources
• Design and decorate the general office and library spaces
• Maintain a collection of newspaper articles suitable for use as supplementary resources to support teaching and learning
• Assist in coordinating with supplier(s) on the delivery of office supplies, teaching resources and library resources
• Loan of ICT/AV equipment
• Printing, photocopying and filing of materials
• Set up refreshments for meetings
• Any other duties as assigned by AM

• Manage and configure IT systems (e.g., Active Directory, servers, backup, video/audio systems).
• Maintain network devices (firewalls, routers, VPNs, wireless).
• Ensure system backups and recovery plans are in place.
• Work with vendors to meet Service Level Agreements (SLAs).
• Create and update technical documentation.
• Provide IT support to local and overseas users.
• Source products and vendors for projects.
• Offer L1/L2 support and lead/support projects.

Job Requirements:

• Diploma/Degree in IT or Computer Science, or CCNA certification.
• At least 1 year of relevant experience.
• Knowledge of WAN, LAN, VPN, and network devices.
• Experience with Microsoft Server, Microsoft 365, and Google Suite.
• Familiar with TCP/IP, DNS, DHCP, and Firewalls.
• Understanding of CyberSecurity and PDPA.
• Bonus: Experience with Veeam, VMware, UNIX/Linux, or API/Database management.

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Troubleshoot IT Network issues, help desk ticket support, hardware setups and software applications

• Support system upgrades, installations, and software updates
• Assist in the administration of user accounts, permissions, and access rights and set up email accounts
• Maintain accurate and up-to-date IT inventory records, including equipment and software licenses
• Provide IT support to local and remote users (Hardware/ Software/ Network)
• Attend to ad-hoc service repair calls
• Assist in web design and graphic design work
• Any other duties assigned by the Superior

Requirement

1. Diploma or degree in Computer Science, Information Technology

2. Interested in marketing IT tools and web services

3. Good communication skills. People-oriented and able to speak in public/zoom briefing

4. Provide support outside of normal operating hours as required

5. IT Savvy and familiar with IT tools such as Microsoft Office and Microsoft Access, SQL database, Phyton, C++, Java, etc

6. Able to commit to a minimum 6-month to 12-month intern contract.

SPH Media is looking for a diligent individual to join the Business Support team, which is responsible for the accurate processing of print and digital orders for our publications, as well as performing administrative duties.

The scope of responsibilities includes the following:

• Responsible for order processing of print & digital newspaper, school and magazine titles.
• Work closely with different stakeholders to ensure all orders are taken in accurately.
• Responsible for preparing & generating newspapers labels and delivery note (DN) for customers.
• Liaise with Production to ensure timely submission of orders, labels & documentations.

• Support the Operations Manager in vendor area allocation duties including vendor performance appraisal process.

• Process purchase requisitions and invoices for the department.

• Provide general administrative support to the department such as filing, typing, copying, binding, scanning etc.

• Support any other assigned ah-hoc duties.

Required Qualifications:
Diploma in Business or related fields

Required Competencies / Skills / Knowledge:

• Proficient in Microsoft Excel and/or Google Sheets
• Able to multi-task and savvy with the use of multiple systems
• Strong numerical aptitude and good written skills

• Effective in interpersonal and communication abilities
• Self-motivated and takes initiative to deliver high-quality work

• Independent, meticulous and mature
• Adaptable to fast-paced and evolving work settings

We are seeking an engineer with opto-electronic product development experience, tasked with the mission of design, build and manufacturing of Si Photonics chips. The candidate must possess expertise in one of the following areas: opto-electronics, photonics, electronic circuit development, electronics board design, packaging design, or FPGA development.

Responsibilities

• Perform system-level optical and electronic test and measurements
• Prepare and develop prototype to products based on Photonics IC specifications and designs
• Source suppliers, establish supply chain and photonics manufacturing and collaborate with ODM/OEM/contract manufacturing partners

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• At least 2 years of working experience
• Candidate is expected to have experience in any one of the following areas: circuit and system, FPGA Development, or Advanced Packaging
• Experience in commercial Si Photonics product design and product engineering is preferred.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred

Quantitative Product Development Engineer (Trading)

Job Responsibilities:

• Actively participate in the development and maintenance of equity and futures products, ensuring consistent improvement in online service quality through technical solutions, and take responsibility for the reliability of live trading.
• Collaborate closely with researchers to enable various strategies, regardless of type or scale, to operate efficiently in live trading and generate substantial returns.
• Conduct research and integration of programmatic trading platforms, including implementing and deploying microsecond-level software solutions.
• Optimize the performance and latency of trading and order execution systems across dimensions such as computation, storage, networking, and hardware.

Job Requirements:

• Bachelor's degree or higher in Computer Science or a related field from a well-known domestic or international university, with over 2 years of work experience.
• Proficient in Linux operating systems and meet at least one of the following:a. Skilled in C++ and one scripting language.
  b. Skilled in Python 3 and one statically-typed language.
• Familiarity with production and iterative processes for online services, along with techniques for improving service reliability.
• Experienced with best practices such as Git, code review, and CI/CD, with a strong focus on tool-building and excellence in execution
• Experience in maintaining large-scale, highly complex, mission-critical products.Strong system design skills with expertise in performance, reliability, and availability.Hands-on development experience in any of the following areas: operating systems, databases, storage systems, or distributed systems.

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Join our R&D team within Chemtech division in Singapore as Electrical and Instrumentation Technician/Engineer.

Your main tasks and responsibilities:

• The job holder is responsible for the execution of preventive maintenance, troubleshooting, repairs, and maintenance of all pilot plant facility as well as maintaining the calibration program of all instruments.
• Develop electrical and instrumentation systems tailored for ATEX or IEC classified environments. This includes designing control panels, crafting intricate wiring diagrams, and meticulously mapping out instrumentation layouts.
• Oversee the installation, commissioning, and maintenance of electrical and instrumentation systems. Troubleshoot and resolve electrical and instrumentation issues to minimize downtime and ensure safety. Conduct routine inspections and preventive maintenance on electrical and instrumentation equipment.
• Ensure all electrical and instrumentation systems adhere to relevant safety standards and regulations. Participate in safety assessments and develop strategies to mitigate risks associated with electrical and instrumentation systems.
• Maintain accurate documentation of electrical and instrumentation designs, configurations, and maintenance records. Prepare technical reports, drawings, and documentation for internal and external stakeholders.
• Identify opportunities for process optimization and efficiency improvement in electrical and instrumentation systems. Stay updated on industry trends and emerging technologies to recommend upgrades and improvements.

To succeed in this role, you will need:

• Diploma or Degree in Electrical Engineering with relevant experiences in pharmaceutical, chemical or petrochemical industries.
• >7 years for Diploma or 3-5 years for Degree experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• •Hands-on experience in ATEX or IEC environment, preventive maintenance, troubleshooting, repairs, maintenance of automation and equipment, as well as maintaining the calibration program of all instruments.
• Ability to conceptualize and provide design for electrical, instrument and control wiring diagrams.
• Requires skills in analyzing malfunctions in control systems and making appropriate repairs. This includes troubleshooting PLCs, field sensors, control wiring, general I/O wiring, & networks/communications wiring.
• Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• Proficiency in AutoCAD or other relevant design software.

Location: We are based in Cleantech 3 (This role is for our new R&D Test Centre)

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable