Responsibilities:

- Respond promptly to and handle customer requests and queries.

- Resolve incidents by troubleshooting system and network problems, diagnosing and resolving hardware/software issues, and analyzing system logs for potential issues.

- Fulfill change requests, service requests, and close problem tickets, including applying OS updates, patches, and configuration changes.

- Conduct preventive maintenance tasks and vulnerability assessments to ensure security compliance and system hardening.

Requirements:

- Bachelor’s degree in Computer Science, Information Technology, or related field.

- Preferred certifications: CCNA, CCNP, CCIE.

- 1-3 years of experience in network and security management.

- Have experience in supporting firewall and network equipment such as Cisco switches, Check Point, and Palo Alto Networks.

- Strong problem-solving skills and a proactive approach to information security.

- Ability to work independently and collaboratively in a team environment.

Department Overview:

Aristos Solutions BU focus on creating customised state-of-the-art automation solutions for all possible industries. By utilising Akribis Systems' direct drive linear and rotary system, we are able to achieve high speed and high precision assembly, inspection or testing solution for our customer.

Job Description

• Application support and setup of motion control system, machine vision system, signal and control devices, used in motion control products and automation equipment
• Design of electrical schematic diagram, single line diagram, cable harness and build, for motion controller systems, device and sensors, used in Industrial automation machine and equipment
• Perform DOE for risk mitigation and feasibility studies on design concept
• Creation of Bill of Material of cables assembly and electrical component used in project
• Review and guides the development of product manual and application notes for new products/applications
• Evaluate and recommend product / solutions for new applications according to customer’s specification
• Understand and help to resolve application issues encountered in projects and by customer
• Work with team to fomulate work instructions
• Machine commisioning in factory/customer Site
• Ensure design meets project required milestone and timeline
• Provide training to customer
• Overseas travel is required with short notice period

Qualifications

• Candidate must process at least Bachelor Degree in Mechanical / Electrical / Mechatronic Engineering or equivalent OR-Fresh graduates with relevant knowledge in their course of study are welcome to apply.
• Knowledge in programming and / or experience in automation field are added advantage
• Preferably with 1-2 Year(s) of working experience in Industrial Automation, Semiconductor or any other related field/industry is required for this position.

Other Information

Skillset(s) Requirement:

• Required Knowledge: Power sizing, power distribution, motion control (advantage)
• Required Skill(s): AutoCAD, Solidworks, Motion control software (advantage)

Attributes:

• Strong communication and analytical skills, energetic and willing to work hard
• Ability to prioritize and multi-task in a fast-paced environment
• Responsible, Positive Attitude and able to work well as a team
• Possess good initiative and good critical thinking skill to solve issue at root cause level

Position Overview:

The Principal Electronics Engineer is a senior leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g., software, mechanical, electronics, system, testing, project etc) to assure and advise on the development and/or delivery of products. The Principal Electronics Engineer possess deep technical and industry knowledge with the ability to influence and guide company direction, ensuring strategic alignment. The Principal Electronics Engineer is also responsible for developing products and designs that support the product development and product goals of EOS DS.

The Principal Electronics Engineer will lead and mentor engineers, up to and including Senior Engineers. They may provide technical assistance to multiple teams and provide a high level of support to those teams. In consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

The Principal Electronics Engineer will have extensive engineering experience across the product lifecycle in a Defence environment, allowing them to provide leadership across engineering teams and execute technical authority as allocated.

Primary Duties:

Specific Functions & Tasks

• Provide necessary guidance and direction to produce electronics designs and analysis that satisfy defined product development requirements in the specified time frames and exercise allocated technical authority.
• Work with systems engineers to ensure all requirements are identified, captured and analysed.
• Lead conceptual design and schematic capture of complex electronic circuits.
• Ensure test and evaluation activities on electronics and system designs are undertaken to verify and sign-off of all design requirements.
• Initiate and/or participate in planning on electronics designs.
• Develop, review and champion the electronics engineering process within EOS DS.
• Ensure the preparation and review of all documentation to support designs.
• Perform conceptual, preliminary and detailed design of complex electronics assemblies.
• Simulate analogue and digital circuits.
• Document designs including calculations, design options and decisions.
• Prepare for and contribute to design reviews.
• Perform test, evaluation, characterisation, verification & validation of electronic subsystems in collaboration with test engineers.
• Prototype electronic circuits, wiring harnesses and other systems.
• Work closely with other engineering disciplines to ensure cohesive and complete electronic designs are delivered on time and on budget and meet project requirements.
• Apply DFx principles (manufacturability, testability, excellence).
• Review work and provide guidance and mentorship to Senior Electronics Engineers.
• Engage key stakeholders and subject matter experts across technical engineering and specialty areas to understand the concept of operations and user needs to elicit and decompose electrical requirements.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and influence strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and ensure a high level of leadership and deep industry, defence system knowledge and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence persuasively through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation, and verification activities on integrated system designs and prototypes to verify and provide recommendations for sign-off of all design/product requirements to the Chief Engineer and Design Authorities based on relevant legislative requirements, standards, and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Engineer.
• Support the leadership alongside with the EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide thorough engineering judgement for progress and the advancement of engineering solutions.
• Apply interdisciplinary, collaborative approach to requirements including analysis of functional and non-functional requirements and functional performance specifications to develop effective solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Engineer and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions.

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder
• Uses experience for sound judgement

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

Responsibilities:

• To lead and drive the requirements gathering process.
• To lead and manage a small team of developers to deliver the modules to develop web-based application systems.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based).
• Lead and manage the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

Requirements:

• A Degree/Diploma in Computer Science with at least 3 years' software development experience in Internet technology in Win NT, UNIX or LINUX platform
• Those with leadership experience may be considered for the Project Lead position.
• Technical skills include proven object-oriented programming experience with Java and C++ together with extensive RDBMS through JDBC
• Experience in J2EE, Web Services and XML will be advantageous
• Experience in Elixir reporting solutions will be advantageous
• Very strong in SQL
• Data analysis skill will be an added advantage, although this is not compulsory to have.
• Good interpersonal skills

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

The Senior Mechanical Engineer is a leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g. software, mechanical, electronics, system, testing etc) to enable development of baselined and software designs that support the product development and product goals of EOS DS.

The Senior Mechanical Engineer exercises in-depth engineering technical knowledge within or across specialist disciplines and the ability to enable strategic alignment. Adherence to governance and standards and mobilising people to achieve business outcomes with the appropriate levels of integrity, safety and ethics is critical to the role.

The Senior Mechanical Engineer exercises initiative and judgement in the interpretation and application of policy and procedures. The Senior Mechanical Engineer may lead a small team and are responsible for managing, developing and guiding staff to achieve their full potential. They provide a high level of support to their team, in consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

Primary Duties:

Specific Functions & Tasks

• Lead and support a multi-disciplinary team to ensure the timely and professional delivery of project outcomes.
• Produce mechanical designs that enable and satisfy defined requirements in the specified time frames.
• Work with systems engineers to ensure that all requirements are identified, captured and analysed.
• Work with project engineers to ensure design solutions are delivered on time and on budget and meet identified requirements.
• Produce mechanical designs that satisfy defined requirements in the specified time frames.
• Develop, review, update, modify, and approve mechanical design plans and work schedules.
• Prepare and review all documentation required to support designs.
• Perform conceptual design, models and drawings of complex mechanical assemblies.
• Perform FEA of models.
• Document designs including calculations, design options and decisions.
• Conduct design reviews with the view to endorse mechanical design.
• Perform test, evaluation, characterisation, verification & validation of mechanical assembles in collaboration with Test Engineers.
• Prototype mechanical assemblies and systems.
• Work closely with other engineering disciplines to ensure cohesive and complete system designs.
• Apply DFX principles (manufacturability, testability, excellence).
• Outline and assign work, review work for technical accuracy and adequacy and provide guidance and mentorship the Mechanical Engineers.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and communicate strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and enable a high level of leadership and deep industry, defence system knowledge, and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence stakeholders through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Champion the assessment and use of rigorous development and problem-solving methods to enable safe, secure, and reliable solutions to engineering problems.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation and verification activities on integrated system designs and prototypes (including formal check points) to verify and provide recommendations for sign-off of all design requirements to the lead engineer and design authorities based on relevant legislative requirements, standards and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to enable and ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Technology Officer.
• Enable EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide deep engineering judgement for progress and the advancement of sound engineering solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Technology Officer, Chief Engineers and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder.
• Uses experience for sound judgements

Philips is a global leader in health technology, committed to improving billions of lives worldwide and striving to make the world healthier and more sustainable through innovation. Driven by the vision of a better tomorrow.

But it’s not just what we do, it’s who we are. We are 80,000, wonderfully unique individuals, with two things in common. An unwavering sense of purpose and a relentless determination to deliver on our customers’ needs. It’s what inspires us to create meaningful solutions – the kind that make a real difference – when it matters most.

The world and our customers’ needs are changing faster than ever before and while we are proud of what we do already, we know we can do more. That’s why we need you, to help us tackle increasingly complex challenges posed by ever evolving health and well-being needs.

In this role, you have the opportunity to make life better

Looking at the challenges the world is facing today Philips’ purpose has never been more relevant. So whatever your role, if you share our passion for helping others, you’ll be working towards creating a better and fairer future for all.

You are responsible for

MR portfolio

• Perform corrective maintenance, supported when necessary by tier-2 support helpdesk
• Demonstrate commitments to meet customer needs and requirements by ensuring all given quality standards
• Submit timely and accurate service data, job sheets, reports, expense claims, radiation film badges, field problem reports and other paperwork as assigned
• Be aware of customer needs and potential commercial leads (Philips Lifecycle Solutions – PLS) through customer visits and provide feedback and recommendations to the management, relevant people within the organization
• Support the District Customer Services & Operations Manager and the Customer Services Account Manager as appropriate with contract renewals etc.
• Use company property with care to ensure optimal results with minimal operational costs
• Keep abreast of new technologies likely to affect PH range of products
• Be a professional representative for PH with respect to customer problems, ensuring personal acceptability by the customer in appearance and behavior in accordance with PH policy and targets
• Accuracy of service records with particular attention to test & inspection results
• Adopting appropriate ESD control while servicing PH equipment
• Usage of appropriate electronic measurement equipment in calibration controlled cycle
• Responsible for reporting identified device safety issues according to applicable PH quality standard policy
• Responsible for reporting customer feedback according to applicable quality standard policy and follow up relevant assigned quality & regulatory training in a timely manner

To succeed in this role, you’ll need a customer-first attitude and the following

• Diploma/Degree in Biomedical or Electronics Engineering or equivalent
• At least 3 years of working experience in service or engineering roles, preferably in the medical device industry
• Good troubleshooting skills
• Good communication and interpersonal skills

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

Cyber Security Engineer Job description

- To implement and deploy solutions like SIEM, EDR, and NMS:

o Splunk

o QRadar

o Carbon Black EDR

o SolarWinds NMS

o Other new onboarded products or solutions

- To manage and work/liaise with product vendors, partners, and customers in terms of schedule, expectation, and requirements

- To be able to research and stage test environment for project preparation

- To provide consistent and clear communication to external and internal stakeholders

- To provide informal training to partners and customers

Requirements:

- Diploma/Degree in Computer Engineering, Computer Science, Information Systems or equivalent

- Minimum 2 years of relevant work experience in IT security implementation and deployment

- Minimum 1 year of relevant work experience with relevant product deployment

- Good understanding of operating system technology, such as Unix, Linux, and Windows Server

- Good networking & scripting knowledge

- Technically inclined and hands-on

- Good interpersonal skills, independent, proactive and a team player

- Good communication, presentation, and writing skills

- Able to work independently

- Preferably from a System-Integrator or Distributor background

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

About the Role:

A team member of RRC (Regional Repair Center) and will be responsible to perform repair of medical endoscopes in RRC. He is also responsible to strictly adhered to the process, safety and quality standards required to repair medical equipment. He also has responsibility to maintain the proper condition of repair workbench as assigned.

Roles and responsibilities:

· Perform repair of medical endoscopes

· Carry out workshop maintenance task assignments

· Ensure compliance with GDPMDS requirements at all times

· Perform 5S in individual and scope repair areas at all times

· Any other duties as assigned

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

· A competitive salary package including AWS and Variable Bonus

· 18 days of annual leave in your first year

· Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering

· More than 3 years of Medical Equipment service provision

· Personality: Team Player, meticulous and organized

· Traits: Steady hands and keen eyes to handle delicate components

· Electrical & Mechanical soldering skills

· Require critical thinking and problem solving skills

· Good with Microsoft Office

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

As a Junior Field Engineer at MyRepublic Broadband Pte Ltd, you will play a crucial role in expanding our presence in the market, focusing on Information and Communication Technologies (ICT) and Telecommunications. FRESH GRADUATES ARE ENCOURAGED TO APPLY

How you’ll contribute to MyRepublic’s success:

Job Description

• Provide technical service and customer support during field visits
• Perform onsite installation, troubleshooting, maintenance, testing and verification tasks as provided in work order
• Recommend customers with solution to resolve and enhance customers’ network and infrastructure
• Work closely with Sales Team and Post Sales Team to ensure maximum success rate, reduce repeat visits
• Drive service success that improves customer satisfaction, maximizes customer retention with superior customer experience
• Build positive relationships with customers
• Produce timely and detailed service reports

What we offer in return:

• Exciting opportunities to create and grow in a rapidly growing organization that is a disruptor in the telco space.
• Amazing colleagues and culture that encourages you to do your best work while staying authentic and true to yourself.
• A work culture that puts your individual needs at the core: We focus on outcomes and believe that you can deliver your best work, working anywhere, anytime.
• Wellness first. We believe that wellness goes beyond team celebrations and birthday parties. Our holistic approach to wellness gives you opportunities to recharge, connect and explore, at and outside work.

In addition to the standard leave entitlements, we offer:

• 1 day of wellness leave every quarter for you to take or your health and wellbeing and explore your personal passions.
• 20 days to work from anywhere each year, allowing you more flexibility to explore and connect with your interests while delivering work you will be proud about.

We think you’ll fit in great with us if you:

• Fresh Graduate from Polytechnic, Diploma or higher in Telecommunications, ICT, Networking and IT related discipline.
• Interested in field services work at customer's site.
• Keen interest to learn and pick up knowledge of various common commercial brands of network related hardware (eg. CISCO, Ubiquiti, ASUS, etc)
• Keen Interest to pick up fibre network setup
• Keen Interest to pick up VOIP, SIP services
• Keen Interest to pick up Firewall, L2, VPN, and other network solution
• Self-starter to deliver the desired customer service experience
• Ability to work alone without minimum supervision
• Ability to work on standby shift duties (on emergency call service)

From being the first to launch 1Gbps broadband plans and the first network optimised broadband service for gaming in Singapore, to crafting workplace practices that put wellbeing at its core, our values guide us in everything we do at MyRepublic. It’s the secret sauce that makes us tick. If you espouse the following, we know you would fit in great with us:

Never Settle: We dream big. We are constantly curious and embrace bold ideas.

Stronger Together: We create together. We win together, we fail together. We grow together, we celebrate together. We are at our strongest together.

Empowered to Deliver: We deliver on our commitments. We are empowered to move fast and with confidence to get the right things done.

We Care: We care for ourselves, one another and our customers. We value authenticity and embrace differences. We create the space to recharge, connect and explore to bring our best selves to work.

• Network engineers shall support System Administrators in day to days operations, such as Data Center & network system health checks, network configuration & firmware upgrades, patch record management and serve as Point of Contact for visitor to IT Room.
• Monitor DC temperature and energy consumption of all facility infrastructure components such as power distribution units and computer room air conditioners unit using Data Centre Infrastructure Management tools in place.
• Monitor network devices health status using a network health monitoring tool in place.
• Assist SA in performing scheduled system health check on standalone networks.
• Report any anomaly in readings based allocated baseline or system hardware failure to SA.
• Contacting maintenance team and be the point of contact on site.
• Log finding in the infrastructure health check register.
• Work with tech support team to perform port security lifting on network devices.
• Configure network devices based on given template.
• Verify and ensure network patch details are updated and labeled accurately as indicated.
• New network faceplate and patch cables laid must be updated.

Requirements:

• Degree or diploma in computer science or IT.
• Minimum 1 year exp in Network engineering in Data center environment.
• comfortable for non Camera Phone environment.

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

Remuneration: Basic Up to $7,000 + AWS

Job Description:

• Design, configure, deploy, and maintain Wintel and Linux server environments, including Windows Server (2019, 2022) and Linux distributions (RHEL, SUSE). Conduct server hardening
• Lead virtualization initiatives using industry-standard platforms such as VMware vSphere, Hyper-V, or KVM.
• Design and manage Storage Area Networks (SAN/NAS), ensuring data availability, integrity, and optimal performance.
• Ensure compliance with industry standards and regulations related to infrastructure and data storage.
• Implement and administer key management and encryption.
• Implement and administer Active Directory, including user accounts, group policies, security settings, and domain controllers.
• Implement and administer AD Public Key Infrastructure and Network
• Policy Server RADIUS services.
• Implement and administer monitoring solutions such as eG
• Innovations, PRTG, Splunk, or Kiwi Syslog server.
• Implement and administer backup solutions like Veeam or Acronis.
• Implement advanced system monitoring solutions to proactively identify and resolve performance and security issues.
• Investigate and resolve complex technical issues related to Windows Server systems, collaborating with teams and vendors.
• Coordinate with third-party vendors, IT providers, and external support for effective service delivery.

Job Requirements:

• Bachelor's degree in Computer Science, Information Systems, Information Technology, or a related field.
• Minimum of 5 years of experience in IT infrastructure engineering with a focus on Windows Server administration.
• Storage implementation experience with Dell EMC / NetApp
• Experience with Wintel servers (Dell), VMware, Microsoft server products, Symantec
• Proven experience in designing on-prem data centre architectures.
• Proficiency in configuring, managing, and troubleshooting Windows Server environments.
• In-depth knowledge of Active Directory, Group Policies, and security best practices.
• Familiarity with virtualization technologies such as VMware or Hyper-V.
• Experience with scripting and automation tools.
• Relevant certifications (e.g., MCSA, MCSE, VCP) are highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

Requirements:

• RTOs shall be accredited with Joint Accreditation Committee of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES)
• Proficient in using Microsoft Word, Excel and PowerPoint.
• To carry out supervision and inspection of the works to ensure that works are constructed in accordance to contract specifications and drawings
• At least 2 years relevant working experience in LTA project as RTO.
• Job Duration : 24 months
• Job Location : Central and West region

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

The Job

• Gathering Feedback: Actively collect and analyze feedback from Driver-Partners to understand their needs and improve their experience.
• Code of Conduct Monitoring: Identify and report any Driver-Partners who violate our Code of Conduct (COC) to ensure a safe and respectful environment for all.
• Issue Escalation: Collaborate with the Partner Trust team to escalate issues and feedback, ensuring timely resolution and support.
• Partner Rewards: Implement and manage various campaigns to reward our Driver-Partners for their hard work and dedication.
• Educational Engagement: Conduct educational sessions focused on Safety and Quality to enhance the knowledge and skills of our Driver-Partners.
• Event Assistance: Support engagement events by performing ad hoc duties such as distributing goodies, packing items, and ensuring a positive experience for all participants.

The Talent

• Driving license Class 3 /3Awith min. 2 years’ experience
• Strong communication and interpersonal skills
• Ability to work collaboratively in a team environment
• Detail-oriented with strong organizational skills

Next Step

• Drop your resume and contact us to follow-up, or send your resume to [email protected]
• Email Topic: Driver Engagement
• Only shortlisted candidates will be contacted

Isaac Tan Yang En

EA Licence No: 91C2918

Personnel Registration No: R24123927

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845