About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly.
• Write, analyze, optimize, and debug product application code to maximize performance and quality.
• Create automated unit tests and integration tests.
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release.
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects.
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices.

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js.
• Experience developing in Node.js development.
• Experience with design patterns, performance/memory analysis, multithreading.
• Agile / Scrum experience including TDD, unit testing, and continuous integration.
• Strong analysis and problem-solving skills.
• Excellent interpersonal skills including verbal and written communication skill.
• Communicates well in English.

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps.
• Experience in integrating with RESTful APIs

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

Our client is a top-tier global pharmaceutical powerhouse, committed to pushing the boundaries of medical innovation and delivering breakthrough treatments to patients worldwide. Be a part of a mission to transform healthcare and make an impact on patients' lives.

As the Senior Production Engineer, you'll be at the forefront of R&D manufacturing operations.

Your Role:

• Manage R&D manufacturing operations and be a technical expert in the process.
• Refine manufacturing techniques, lead method validation projects, and be the go-to expert for training operators on Standard Operating Procedures (SOPs).
• Documenting crucial process safety and risk assessments, maintaining the highest standards of excellence.

Requirements:

• Background in a regulated manufacturing environment (pharmaceutical or biotechnology preferred).
• Master's or PhD in Chemistry, Chemical Engineering, or Pharmaceutical Sciences.
• 5+ years of hands-on experience in formulation development.
• In-depth understanding of GMP, process development, validation, and pharmaceutical quality systems.
• Proven track record in pharmaceutical formulation development and technology transfer.

If you are interested, please apply with your CV attached.

Commissioning (Cx) Lead Engineer – Mechanical, Data Centre

Role: Leads the commissioning of all mechanical systems within the data center, with a focus on achieving optimal cooling and environmental control essential for data center operations.

Key Responsibilities:

Develop and implement mechanical commissioning procedures .

Ensure systems are tested for cooling redundancy and efficiency, meeting stringent uptime and temperature control requirements.

Oversee performance testing of cooling systems, including airflow management and pressure tests to prevent hotspots and optimize cooling efficiency.

Collaborate with design and operations teams to ensure mechanical systems align with energy efficiency, environmental, and operational goals of data centers.

Troubleshoot and optimize complex mechanical systems to ensure high reliability and continuous operations.

Provide technical reports on system performance and recommendations for mechanical systems' long-term operation.

Familiarity with ASHRAE data center cooling guidelines.

Expect more. Connect more. Be more at Diebold Nixdorf.

Our teams automate, digitize, and transform the way more than 75 million people around the globe bank and shop in this hyper-connected, consumer-centric world. Join us in connecting people to commerce in this vital, rewarding role.

Attend field service ticket assigned by helpdesk, working on the ticket with status update, interrupt the ticket whenever necessary, close ticket when done with resolution. Follow up with interrupt tickets. Maintain a good manner for parts handling, for return & disposal.

Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises. Provides scheduled inspection, cleaning and other services and performs minor product repairs within an assigned territory. Inspects products for correct operation and resolves noted issues and / or escalates according to established procedure. Schedules services, completes all required paperwork and works with customers to ensure satisfaction with service delivery and understanding of product functionality.

RESPONSIBILITIES

· Gains familiarity with Field Service Technician practices and procedures.

· With guidance and / or in conjunction with more experienced technicians performs any or all of the following: Incident Handling: Utilizes diagnostic tools to perform troubleshooting via detailed analysis of hardware and software failures.

· Performs hardware repairs on a component level.

· Cleans and adjusts mechanical components.

· Configures and installs applicable software.

· Preventive Maintenance: Performs routine checks according to documented procedures.

· Refills consumables as directed.

· IMAC/R: Installs, moves, adds, changes and removes hardware and software products.

· Customer Training: Instructs and trains customers on usage and operation of installed hardware and software.

· Participates in regular hardware and software trainings (on the job, classroom and web based).

· Participates in the implementation of measures to achieve agreed KPIs.

· Assists with special projects as assigned.

QUALIFICATIONS

• Minimum of 1-2 years of relevant experience or equivalent combination of education and experience in Field Services.
• Good written and verbal communication skills.
• Basic Mandarin language skill required due to operational needs.
• Exceptional customer service skills are needed.
• Ability to organize and inventory truck stock parts and tools.
• Sense of urgency, organizational skills, professional presence and work in team environment.
• Ability to pass MVR, background and drug test where required.

ABOUT US

Why should you join Diebold Nixdorf?

Brightest minds + technology and innovation + business transformation The people of Diebold Nixdorf are 23,000+ teammates of diverse talents and expertise in more than 130 countries, harnessing future technologies to deliver personalized, secure consumer experiences that connect people to commerce. Our culture is fueled by our values of collaboration, decisiveness, urgency, willingness to change, and accountability.

–Diebold Nixdorf is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, or disability status.

** To all recruitment agencies: Diebold Nixdorf does not accept agency resumes. Please do not forward resumes to our jobs alias, Diebold Nixdorf employees or any other organization location. Diebold Nixdorf is not responsible for any fees related to unsolicited resumes**

We are a global Company operating in multiple Locations and Entities. As we are keen to find the best solution for our candidates several legal entities might be applicable for a Job offer. A List of our operating entities can be found here - https://www.dieboldnixdorf.com/en-us/about-us/global-locations

Responsibilities

1. Technical oversight and issue resolution

2. Safety and quality management

3. Project administration and progress monitoring

4. Stakeholder management and coordination

5. Reporting and compliance

Key Skills:

1. Technical knowledge

2. Communication and coordination

3. Analytical and problem-solving

4. Safety and quality management

5. Stakeholder management

Qualifications & Experience

1. 8+ years of experience in civil & structural engineering

2. Relevant experience in deep excavation, foundation, tunnel, and building works

3. Recognized Civil & Structural Engineering degree (PEB Singapore)

4. Accredited by JAC (IES/ACES)

5. Proficient in PSSCOC contract administration

6. Strong leadership, supervision, and interpersonal skills

7. Commitment to safety and health

8. Familiarity with statutory codes, quality control, and construction administration

Desired Qualities:

1. Proven track record in leading supervision teams

2. Excellent organizational skills

3. Strong communication and interpersonal skills

4. Ability to manage teams and ensure personnel welfare

JOB SCOPE & JOB RESPONSIBITIES

• Prepare submission and approval of documentation
• Prepare RFQ, evaluate and recommend purchases
• Coordinate with Customer, Consultant and Inter-department
• Tracking progress and prepare reports

JOB REQUIREMENT

• Degree with Mechanical / Electrical / Chemical / Environmental

About Mikomiko Pte Ltd:

At Mikomiko, we are at the forefront of AI Technology and AI Solution development and deployment. Our expertise spans across machine learning, deep learning, multi-model learning, transformer, NLP, frontend, backend, cloud and embedded software development, to focus on AI Generated Content (AIGC) generation and beyond. Join us in shaping the future of AI and revolutionizing industries through innovation and advanced technology.

Job Description:

The incumbent attached under AI Software Development will be involved in AI software and Social Media platform development, frontend and backend development, integration and testing for AI product and AI platform, where AIGC, machine learning (ML), deep learning (DL), computer vision, speech processing, NLP, 3D and Computer graphics and their combination might be used.

Job Responsibilities:

As a full-time employee in AI Software Development, you will be responsible to:

· Lead the architecture, design, and development of robust full-stack solutions.

· Collaborate and work closely with product managers, designers, and AI developers to understand project requirements and design UI, develop and test AI system in docker for commercial applications or to improve existing products.

· Provide technical leadership and mentorship to junior developers.

· Assist the team to develop Web/Mobile application with frontend and backend (full stack) and deploy AI system with cloud service in applications

· Participate in code reviews to maintain code quality and ensure best practices are followed.

· Be involved in system integration and operation in DevOpps, with testing and evaluation work

· Continuously research and evaluate new technologies to drive innovation.

· Troubleshoot, debug, and optimise application performance and AI systems.

· Stay ahead of industry trends, continuously researching and evaluating emerging technologies to drive innovation.

Job Requirements:

· Proven experience as a Full Stack Developer, with strong skills on both front-end and back-end technologies.

· Programming skills with experience in GUI design and implementation, frontend and backend development, and cloud/server system design and integration in the use of programming languages such as C/C++, Python, Java, Javascript/Typescript, Swift programming, C#, web related programming; strong proficiency with Database, React, Angular, Vue.js., NextJS, Nodejs, Docker, embedded software development

· Solid understanding of database systems (SQL, NoSQL).

· Extensive use of APIs and strong understanding of HTTP(S) and REST architecture.

· Knowledge of cloud services and deployment (AWS, Azure, Google Cloud, Firebase).

· Familiarity with DevOps practices and CI/CD pipelines.

· Experience with micro-services architecture.

· Familiarity with containerization and orchestration (Docker, Kubernetes).

· Ability to quickly develop expertise in new domains and products, and eagerness to master new challenges.

· Strong communication, collaborative, leadership abilities along with analytical and problem, solving skills

Additional advantages:

· Experience with data stream processing, data platforms at scale and distributed systems i.e. Spark, Kafka, Hadoop.

· AI application and deployment in limited resource with the performance optimization.

Educational Requirements:

· Bachelor’s degree in Computer Science or related field with of 3 - 6 years hands-on programming experience.

Benefits:

· Gain hands-on experience in a leading AI company at the forefront of technological advancements.

· Work closely with a diverse team of experts and professionals in the AI industry.

· Flexible working hours with official annual leaves, medical leaves, insurance provided.

· Potential for performance-based incentives

Job Description:

Responsible for field test of the mobile communication module, capturing bug log, writing test daily reports, sorting and uploading test logs, etc;

Job Requirements:

1. Be familiar with the basic principle of wireless communication and 3GPP protocol;

Experience in GSM, LTE-related wireless network test optimization, vivo or field test of other mobile phone manufacturers, familiar with mobile phone and network-related interactive signalling is preferred.

2. Skillfully use common log capture analysis tools, such as Qualcomm's qxdm, qpst, qcat, etc.

3. Major in computer and communication, college degree or above.

4. Speak fluently English and local language.

5. Legal visa and residence permit.

6. Can do all local operators post-payment card.

7. Work in an office.

Job Description

• Testing: Setup controllers with motors. Tune the system and perform functionality tests for new functions and features.
• Debugging: Replicating issues that customers face and liaising with R&D to report bugs.
• Advanced Debugging: Looking into the code base to find the bug, and test a fix.
• Feature Development: Customize features for specific use cases.
• Electrical Design: Adhoc designing of interface cables, drawing electrical diagrams. (No pre-requisites for electrical knowledge required)

Qualifications

• Candidate must process at least Bachelor Degree in Mechanical / Electrical / Mechatronic Engineering or equivalent OR-Fresh graduates with relevant knowledge in their course of study are welcome to apply.
• Knowledge in programming and / or experience in automation field are added advantage
• Preferably with 3 Year(s) of working experience in Motion Controls, High precision, Semiconductor, Machine building, Manufacturing.
• Dealt with applications project, delivery to customers, facing with customer and deadline pressure.
• Ability to apply critical thinking to solve a vast spectrum of potential issues.

Other Information

Skillset(s) Requirement:

• Fluency in Chinese, both written and spoken
• Knowing how to speak Hebrew is a huge plus
• Strong communication skills
• Strong social skills and intuitive feel for group dynamics

Attributes:

• Strong communication skills necessary
• Life long learning mindset
• Kind, friendly and approachable

Responsibilities:

• Be a member of the Process Engineering Team for top quality servers & storage products, maintain and update end to end production process & value stream mapping, cover end to end production process for better efficiencies thru process optimization, layout/work station enhancement as well as smart factory / automation projects
• Cooperate with the NPI PM team, Test Engineers, Quality, Production, Planning, Logistic and other departments to support production, including audit
• Support NPI ramp with propose new equipment, manage equipment readiness to support LVO, Engineering Change and customer requirement
• Ability to perform first level process issue triage and resolve issues locally where possible, analyze and identify process issue and deficiencies with follow up actions for resolution and improvement to meet goal for cost, quality and delivery.
• Escalate any process issue found to have major impact on quality, process and or cycle time if not able to resolve locally

Skills and Requirements:

• Bachelor’s Degree in Electrical / Electronics Engineering
• 3+ years of relevant work experience is preferred
• Strong IT background, experience with SAP is an advantage
• Technically know-how on Kaizen, 6 Sigma, PFMEA, DOE and/or 8D is a plus
• Experience with server & storage product is an advantage

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job Description:

• Manage and perform engineering/design execution, planning, and interface and ensure that activities are completed on schedule and within the budget.
• Prepare project execution and quality plans, projects plan of works, initial projects safety review, initial projects environmental review, and project control system.
• Coordinate with project managers, discipline engineers, designers, drafters and field staff, and ensure consistency in execution of project activities.
• Organize and conduct project meetings, technical, and progress reviews.
• Initiate and complete projects close-out and archiving.
• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Ad- hoc duties assigned

Requirements

• Degree in Civil / Structural Engineering recognised by the Professional Engineer Board
• At least 3 - 5 year(s) of relevant experiences in construction industry
• Knowledge of Autocad would be an advantage
• Good communicative skills, able to interact with people of all levels and teamwork
• 5.5 days work week

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

Overall Summary:

Senior Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

Responsible in the preparation of line index, tie-in list, piping layout and information, loading calculation, MTO sketch, BM/BQ, and 2D/3D CAD modeling of piping system, equipment and structure, interference detection, and model review.

Has the technical responsibility for developing stress/vibration sketch/model, and mechanical data, for interpreting moment, stress, reaction force, and displacement, and for coordination these responsibilities with reports to ensure timely completion that meets project schedule and budget.

Duties & Responsibilities:

• Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• Prepares line index, tie-in list, piping layout, piping information, loading calculation, steam trace layout, MTO sketch, BM/BQ, plan and isometric drawing in compliance with project standards, specifications, contract requirements, and accepted engineering and construction practices.
• Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation, prepares mechanical data, and performs calculation for initial displacement with assistance of Senior Piping Engineer.
• Assists in developing model for stress/vibration analysis, interprets and evaluates result, and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.
• Performs highly specialised 3D CAD modeling of equipment, structural, and piping system, interference detection, annotation, model review, and plan drawing extraction according to project 3D modelling procedure and by the use of PDS Intergraph or SP3D CAD software.
• Prepares steam trace piping drawings and pipe support drawings in 2D CAD format.
• Assists the Senior Piping Engineers or project Key Person in field survey work to develop conceptual routing, verify tie-in location, and other related activities.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Bachelor’s Degree in Mechanical or Chemical Engineering with 5 years of experience.
• Training will be provided.
• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software. Capable to utilize AutoCAD/Cad Pipe /Microstation 2D CAD; PDS Intergraph and SP3D softwares with minimal assistance.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyse and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication.

We are looking for a Software Engineer who are inquisitive self starters that are able to thrive well in ambiguity who enjoys being at the forefront of a revolution in technology. You will be challenged with solving complex problems daily. If you are passionate about the future of decentralized finance, with strong desire to leave your mark on the Web 3.0 space, we want you!

Responsibilities:

• Design, architect and implement core features and peripheral contracts
• Design and write thorough unit and integration tests to test the developed smart contracts under various scenarios to ensure the dApp security
• Research and explore other protocols and programming models
• Maintain well-written documentation for internal and external users
• Improve development tooling and productivity in the smart contract team
• Participate in public protocol discussions on Discord or Twitter

Requirements:

• 1+ years of experience in writing smart contracts (in either Solidity, Rust, or equivalent) that have been deployed to a production mainnet.
• 4+ years of experience in software engineering. Able to develop backend and automation scripts in Typescript, Javascript, Shell and/or Python.
• Have good knowledge of data structures and optimisations
• Proficient in verbal and written communication in English
• Remote friendly but must be willing to work around GMT +8 Timezone Primarily

Benefits:

• Basic salary up to 4.8k depending on experience
• Annual performance bonus (min 1 month)
• Annual increment
• Education sponsorship & fully paid external training
• Mobile reimbusement ($50/month)
• Dental claims ($250/year)
• AL starting from 15 days
• Fully covered GP medical fees
• Free company transportation from Clementi MRT

Key Responsibilities:

• Administer core system like Active Directory Services, Data Centre and server storage
• Manage communication tools like video conferencing, audio systems and telephony
• Configure and maintain network devices such as firewalls, routers, VPN and etc
• Ensure systems are backed up automatically and create disaster recovery plans
• Monitor system resources (CPU, storage) and apply patches
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met
• Write and update user guides and administration manuals
• Provide technical support to both Local and Overseas (via LAN/WAN)
• Provide L1/L2 support in IT projects
• Other IT related duties

Requirements:

• Min Diploma in IT or Computer Science, or equivalent
• Familiar with internet architecture designs (TCP/IP, DNS, DHCP, Proxy, Firewall)
• Preferably with experience of Veeam, VMware, and UNIX/Linux
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller would be advantageous
• Bilingual in English and Chinese to liaise with Chinese speaking overseas counterparts

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

The successful applicants will work in the Operations Department – involve in the logistical functions for events and furniture movement, maintain the cleanliness of designated areas, work alongside other members of the school’s traffic control team ensuring the safety of users in the school grounds.

Requirements:

• Minimum completed PSLE

• Able to understand and speak simple English

• Experience in cleaning work and in handling cleaning equipment

• Able to communicate and work well with colleagues

• Willing to work overtime on weekdays and weekends if required

Key Responsibilities

1. Events

• Assist in setting up and tearing down staging/seating for events as required; and
• Assist in preparation and handling of equipment/resources/refreshments for events/ meetings.

2. Logistics

• Assist in moving/transferring/transporting of items both in-house and off-site locations when required; and
• Be responsive and committed to meet the users’ requirements and needs.

3. External Housekeeping

• Maintain cleanliness in designated areas to plan;
• Be proficient in usage of cleaning equipment/machinery; and
• Ensure that the cleaning storage area is tidy and clean.

4. Traffic

• Assist the children in entering/alighting from vehicles at designated drop-off/pick-up points in the school; and
• Assist in guiding vehicles and pedestrians for a smooth flow of traffic.

5. Safety

• To be conscious of safety when carrying out duties in all areas;
• To follow safe work procedure in manual handling, operation of machines, use of electrical tools; and
• Put on personal protective gear provided such as safety glasses, gloves, safety shoes, and water boots.

6. Organization

• To adhere to duties roster as scheduled by the line manager;
• Maintain orderly storage of furniture/equipment/event supplies for operational usage ready;
• Organize and look after areas and equipment;
• Report any organizational problems to the line manager or whomsoever delegated the responsibility as appropriate; and
• Required to put in overtime on a regular basis.

7. Communication

• Communicate regularly with line manager on any organizational issue;
• Communicate with users related to job requests; and
• Build a good working relationship with colleagues.

8. General

• Maintain a high standard of personal appearance, including uniform;
• Maintain a high standard of conduct and behaviour that is sensitive to children;
• Be punctual and have a positive attitude to attendance;
• Be willing to move from one set of duties to another as needs arise; and
• On an annual basis, complete the Review and Development exercise and undertake identified development opportunities. Maintain an accurate and up to date record of all Professional Development opportunities.
• Be responsible for reporting any concerns about a child to the Designated Safeguarding Lead.
• Embrace the School’s commitment to creating a diverse and inclusive environment.

Personal Attributes

• Able to understand and speak simple English;
• Have a commitment to punctual timekeeping and good attendance;
• Be willing to work overtime on weekdays and weekends if required;
• Positive attitude and good initiative and
• Able to work independently as well as a good team player.

The school is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. We will conduct thorough background checks on all successful applicants.

5.5 day week. Interested applicants, please email with an application letter and detailed resume, stating your current and expected salary, date of availability and contact number to [email protected].

(Only shortlisted applicants will be notified)

CPE Registration No.: 196100114C | Period of Registration: 7 June 2023 to 6 June 2029

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Responsibilities

· Design, testing and qualify PCBA/ module in accordance with design specification

· Work closely with peers, such as software, firmware, and mechanical engineering, to design a medical robot.

· Develop and maintain design documentation, including requirements, design documents, and test plans.

· Ensure compliance with relevant industry standards and regulations, such as FDA and ISO standards.

· Collaborate with other functional teams (mechanical design, process, software, manufacturing, and purchasing, etc.) to achieve project goals.

· Produce engineering outputs (BOM, CAD, WI etc.) for manufacturing of products.

· Navigate regulatory testing for Electrical Safety, Functional Safety, Radiated/ Conductor Emission & Immunity.

· Collaborate with product management and stakeholders to identify and prioritize new features and functionality for the robot.

Competency Requirements

· Master’s/ bachelor’s degree in electrical/ Electronic Engineering or other relevant discipline

· >5 years’ experience in product design and development, fresh graduates with keen interest in electrical design are welcome to apply.

· Strong working knowledge with microcontrollers, digital and analog circuitry design

· Strong working knowledge of firmware development

· Strong working experience in CAD software and PCB layout are preferred.

· Strong hands-on skills in debugging/ troubleshooting/ design verification are required.

· Able to work with other discipline to

· Able to provide guidance to junior engineers on development of product.

· Able to work independently, self-motivated and collaborate with peers in design team to design a product in accordance with specification.

· Experience in regulatory test is welcome.