Job Description :

We are looking for a skilled and proactive AV/IT Engineer who can take the lead on AV/IT initiatives and offer expert advice on AV/IT design and project plans, ensuring project needs are met, maintain, and monitor project timelines, intervening when necessary, onsite installation, upgrades, troubleshooting, take ownership and coordinate with others to support daily audio visual technical requests. Supervise and assist in the setup, troubleshooting and maintenance of audio visual systems. Perform preventative maintenance to ensure equipment is ready for use. Identify defective or failed equipment and resolve issues as they arise. Compile and analyze weekly reports, incident reports, and service report submissions, networking, and other in-house projects at customer premises. Programming, and basic construction setups Manage, test, and commission necessary devices. Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Requirements :

*Pass experience with working with Telcos is a must.

Core Responsibilities:

• Will normally work with a Site Engineer with the same areas of work.
• Execute, monitor and ensure the timely completion of the project
• Liaise with the Consultant Representative on project matters
• Coordinate with Site Engineer on the project matters.
• Coordinate with all Subcontractors on matters pertaining to site and quality issues;
• Ensure all contractual requirements are complied with agreed procedures.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Site Engineer.
• Implement cost control measures to meet project budget.
• Co-ordinate with QAQC Engineer to ensure quality performance of project to meet customer requirements.
• Check working drawing, identify discrepancies for resolution.
• Check for quality of work according to specification and requirement;
• Maintain inspection records of works, materials and all completed works;
• To assist environmental aspects and impacts, and other environmental issues relating to EMS.
• Review project specifications, technical clarification and construction drawings.
• Coordinate with architect, structural engineer and M&E consultant and vendors to resolve construction and installation issues.

Site Based.

Report to Senior Engineer and Director.

Job Specifications

• Degree in Mechanial Engineering / Building Engineering or other building-related disciplines.
• 1-3 years' experience in building and construction projects.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

Position Overview: The Senior Mechanical Engineer is a highly skilled and experienced professional responsible for leading and contributing to the design, development, and implementation of mechanical systems and products. This key technical role involves overseeing complex engineering projects, providing technical expertise, and mentoring junior engineers. The Senior Mechanical Engineer plays a critical role in ensuring the successful execution of projects, adherence to engineering standards, and the delivery of high-quality mechanical solutions.

Key Responsibilities:

1. Mechanical Design and Development:

• Lead and participate in the design and development of mechanical systems, components, and products from concept to production.
• Utilize engineering principles and software tools to create detailed 3D models, simulations, and prototypes for testing and validation.

2. Technical Leadership:

• Provide technical leadership and guidance to a team of mechanical engineers, fostering a collaborative and innovative work environment.
• Mentor junior engineers, offering expertise, knowledge transfer, and professional development support.

3. Project Management:

• Take ownership of complex engineering projects, creating project plans, setting milestones, and managing resources to ensure timely completion.
• Collaborate with cross-functional teams, including electrical engineers, industrial designers, and project managers, to achieve project objectives.

4. Analysis and Testing:

• Conduct engineering analysis, simulations, and tests to evaluate mechanical systems' performance, strength, and reliability.
• Analyze test data, identify areas for improvement, and iterate on designs to achieve optimal outcomes.

5. Compliance and Standards:

• Ensure designs comply with relevant industry standards, codes, and regulations, as well as company-specific quality and safety guidelines.
• Keep abreast of changes in industry standards and incorporate them into the design process.

6. Cost Optimization:

• Work with procurement and manufacturing teams to optimize designs for cost-effective production without compromising quality or performance.
• Identify opportunities for value engineering and suggest design modifications to reduce production costs.

7. Prototyping and Manufacturing Support:

• Collaborate with prototype and manufacturing teams to oversee the transition from design to production, resolving manufacturing challenges.
• Support the manufacturing process by addressing design-related issues and providing design documentation.

8. Continuous Improvement:

• Continuously improve engineering processes, methodologies, and best practices to enhance the efficiency and effectiveness of the engineering team.
• Stay updated with advancements in mechanical engineering and related technologies to drive innovation.

Qualifications and Requirements:

• Bachelor's or Master's degree in Mechanical Engineering or a related field.
• Proven experience as a Mechanical Engineer with several years of progressively responsible roles and demonstrated achievements in design and development.
• Proficiency in computer-aided design (CAD) software and other engineering analysis tools (e.g., FEA, CFD).
• In-depth knowledge of mechanical engineering principles, materials, and manufacturing processes.
• Strong problem-solving skills and the ability to troubleshoot complex mechanical issues.
• Experience leading and mentoring engineering teams, with strong leadership and communication abilities.
• Familiarity with project management methodologies and the ability to manage multiple projects simultaneously.
• Excellent analytical and critical thinking skills to assess designs and make data-driven decisions.
• Familiarity with relevant industry standards and regulations.
• Adaptability and a continuous learning mindset to keep up with emerging technologies and advancements in the field.

Note: The specific responsibilities and requirements for a Senior Mechanical Engineer may vary depending on the industry and the nature of the company's products. This job description serves as a general outline of the role's typical responsibilities.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. With a minimum of 7 years relevant industrial work experience

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Nitto Denko Asia Technical (NAT) Centre was established in 2008 and backed by a 100-year-old Japanese corporation, Nitto Denko Corp. NAT is situated in Biopolis, heart of Singapore’s biomedical hub. NAT’s mission is to develop the Integrated Organic Optoelectronic for Biosensor Application. To achieve this mission, NAT is carrying out many concurrent research projects with top research institutions both locally and overseas.

Are you passionate about creating disruptive innovations that will shape the future of Southeast Asia’s emerging markets? We are seeking a visionary and entrepreneurial Business Development Strategist to lead our efforts in discovering, designing, and launching groundbreaking businesses across Southeast Asia. This is a newly created position.

As part of our fast-growing team, you will be responsible for identifying new business opportunities, leading market research, and collaborating with our talented engineering team to turn ideas into reality. This role offers the exciting opportunity to impact the region’s dynamic economies while playing a key role in the expansion of our company’s presence throughout Southeast Asia.

You will:

• Drive the end-to-end development of new business initiatives, from ideation to launch, with a focus on scalability across Southeast Asia.
• Conduct thorough market research, identify trends, and analyze opportunities within various industries across Southeast Asia, adapting strategies to different cultural and economic contexts.
• Collaborate closely with our engineering and product teams to develop innovative solutions that meet market needs and align with our overall business goals.
• Build strong business models, define the go-to-market strategy, and ensure successful execution and market penetration.
• Lead the validation process through testing prototypes and gathering customer feedback, iterating on ideas to ensure product-market fit.
• Establish partnerships with local stakeholders, investors, and key players across Southeast Asia to support business growth and regional expansion.
• Manage and track project performance, financials, and key metrics to ensure the business meets its targets and delivers impact across the region.

Skills/Qualifications:

• Experience: Proven experience in business development, new business creation, or entrepreneurship, particularly in Southeast Asia or similar emerging markets. Experience in tech startups or innovative industries is highly valued.
• Market Knowledge: Deep understanding of Southeast Asia’s economic, social, and business landscapes, with the ability to navigate diverse markets and adapt strategies accordingly.
• Analytical Skills: Strong analytical and problem-solving abilities, with experience in market research, competitor analysis, and data-driven decision-making.
• Innovation-Driven: Passion for innovation and the ability to translate complex ideas into actionable business strategies. Experience in product development or service design is a plus.
• Collaboration: Ability to work effectively with cross-functional teams, including engineers, product managers, and external partners. Strong communication and leadership skills are a must.
• Entrepreneurial Mindset: Self-starter who thrives in fast-paced, ambiguous environments. Willing to take ownership of projects and drive them forward with limited oversight.
• Cultural Sensitivity: Ability to work across different cultural contexts in Southeast Asia, building relationships and partnerships that respect local nuances.
• Languages: Fluency in English is required. Proficiency in regional languages (e.g., Japanese, Mandarin, Bahasa, Thai, or Vietnamese) is an advantage.
• Flexibility: Willingness to travel across Southeast Asia to meet partners, conduct market research, and oversee projects on-site.
• Internal alignment: Our HQ is in Japan. Internal alignment experience with Japanese company are needed
• Education: A bachelor’s degree in Business Administration, Economics or equivalent.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

You will report to the Business Development Manager and will assist to answer questions from customer about our company’s products and/or services.

Delivering information about our company’s offering, understanding potential customer’s needs to pitch for new sales. And support existing customers by helping them to resolve their service issue, determining the root cause, rectifying the necessary and explanation or addressing the matter if required. Contact relevant internal stakeholder to rectify and then clarifying with customer, quickly escalate the situation internally for customer if necessary, and follow up with internal stakeholder and customer until customer issue has been resolved.

Responsibilities

• Coordinate for sales team by managing schedules, filing confidential documents and communicating important and relevant information.
• Price update to internal stakeholders and system. (Monthly, quarterly or new model
• Update sales performance (weekly) and record sales department KPI
• Generate reports (Weekly & monthly basis)
• Communicate and coordinate with internal departments on sales planning
• Respond promptly to customer inquiries, manage all incoming customer queries, issues or grievances with patience, positivity and professionalism over the phone and/or via emails;
• Keep records of customer interactions, record details of inquiries or complaints and actions taken by relevant colleagues;
• Follow up to ensure that appropriate actions were taken on customers' issues or requests and that customer issue has been revolved successfully;
• Report unresolved customer grievances or special requests to Business Development Manager for further investigations
• Communicate with customers to chase payment for unpaid invoices while maintaining professionalism and strong customer relationships.
• Any other ad-hoc duties.

Requirements

• Candidate must possess at least Professional Certificate / O’ Level / NITEC or recognised diploma in a related field;
• Minimum 1 year of experience in similar position;
• Experience in international movements of goods, freight forwarding or logistics industry would be an added advantage;
• Excellent communication skills; proficiency in Microsoft Office applications
• Mature, detail oriented & well organized; able to work independently with minimal supervision;
• Good team player, positive attitude and willing to learn;
• Skilled in working cross culturally and in developing relationships with colleagues;
• Preferably Junior Executive Level

You will report to the Business Development Manager and will assist to answer questions from customer about our company’s products and/or services.

Delivering information about our company’s offering, understanding potential customer’s needs to pitch for new sales. And support existing customers by helping them to resolve their service issue, determining the root cause, rectifying the necessary and explanation or addressing the matter if required. Contact relevant internal stakeholder to rectify and then clarifying with customer, quickly escalate the situation internally for customer if necessary, and follow up with internal stakeholder and customer until customer issue has been resolved.

Responsibilities

• Coordinate for sales team by managing schedules, filing confidential documents and communicating important and relevant information.
• Price update to internal stakeholders and system. (Monthly, quarterly or new model)
• Update sales performance (weekly) and record sales department KPI
• Generate reports (Weekly & monthly basis)
• Communicate and coordinate with internal departments on sales planning
• Respond promptly to customer inquiries, manage all incoming customer queries, issues or grievances with patience, positivity and professionalism over the phone and/or via emails;
• Keep records of customer interactions, record details of inquiries or complaints and actions taken by relevant colleagues;
• Follow up to ensure that appropriate actions were taken on customers' issues or requests and that customer issue has been revolved successfully;
• Report unresolved customer grievances or special requests to Business Development Manager for further investigations
• Communicate with customers to chase payment for unpaid invoices while maintaining professionalism and strong customer relationships.
• Any other ad-hoc duties.

Requirements

• Candidate must possess at least Professional Certificate / O’ Level / NITEC or recognised diploma in a related field;
• Minimum 1 year of experience in similar position;
• Experience in international movements of goods, freight forwarding or logistics industry would be an added advantage;
• Excellent communication skills; proficiency in Microsoft Office applications
• Mature, detail oriented & well organized; able to work independently with minimal supervision;
• Good team player, positive attitude and willing to learn;
• Skilled in working cross culturally and in developing relationships with colleagues;
• Preferably Junior Executive Level

The resources will have the below qualifications:

• Required skills include 3+ years of experience in the implementation, maintenance and analysis of data center facilities, hardware, communications infrastructure, strategies, tools and effective troubleshooting techniques.
• Basic background on enterprise data center facilities and infrastructure environments such as PDUs, RPPs, network and SAN infrastructures. In depth knowledge on complex, Enterprise class inter-networked environments involving a combination of switched/routed/shared Ethernet, TwinAx (100GigE, 25GigE,10GigE, GigE, 100M, and 10M), token ring, SAN, and wide area connectivity.
• Strong knowledge of WAN technologies (OC-x, DS-x), subnetting and TCP/IP protocol a must.
• Knowledge of trouble ticketing systems, change control, Project processes and associated tools.
• Logical problem- solving techniques and associated experience in system, data center facilities, and telecommunications.
• Experience with project management.
• Financial Services industry knowledge a plus.

Interested candidates, please send over your resume to [email protected]

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Responsibilities

• Administer, upgrade, maintain high availability, performance, and security of Linux, Windows, storage clusters, virtualization clusters (VMWare and Kubernetes), and critical middleware services.
• Oversee, monitor, improve infrastructure and critical services health through performance optimization, security hardening, patch management, service updates, and scalability assessments.
• Drive the adoption of automated practices such as Infrastructure as Code (IaC) for provisioning, configuration, and maintaining infrastructure.
• Develop, maintain, improve automation scripts and tools to streamline continuous integration (CI) pipelines and deployment processes for software development and IT operations.
• Design and implement monitoring solutions or observability tools to track infrastructure performance, logs, and application health.

Requirements

Educational Background:

• Diploma, Degree or higher in Computer Engineering, Computer Science, Engineering, Information Technology, or a related technical field. Advanced certifications are a plus.

Professional Experience:

• Minimum 6 years of hands-on, professional experience in IT operations, infrastructure management, software development, or a closely related field.

Technical Skills:

• Proven experience in managing and supporting critical services across Linux, Windows, and middleware platforms.
• Strong background in Linux administration and management.
• Strong expertise in Windows Server administration, including AD, GP, Windows-based infrastructure services.
• Extensive experience in virtualization platforms (ESXi) and container orchestration (Docker).
• Hands-on experience in network and software-defined storage technologies (Ceph, NAS, NFS).
• Proficiency in CI/CD processes, automation tools (GitLab CI, Jenkins), deployment workflows.
• Knowledge in infrastructure monitoring, alerting, logging tools (ELK Stack, Grafana, Loki, Prometheus).
• Experience in Infrastructure as Code (IaC) tools (Ansible, Chef, Puppet).
• Strong willingness to learn, collaborate, and contribute to continuous improvement.

Preferred Skills

• Proficiency in scripting and automation with Bash, Python, Shell, PowerShell, Go, YAML.
• Strong knowledge of security protocols and best practices in infrastructure management and DevOps.
• Familiarity with hardware storage technologies (DAS, FC, iSCSI, RAID, SAS, RAID).
• Experience with common IT integrations (LDAP, SIEM, SMTP, REST).
• Knowledge in CI/CD methodologies and tools.

What We Offer

• Competitive salary, bonuses, attractive benefits package.
• A flat hierarchy with minimal bureaucracy, where all technical leads are also hands-on.
• Freedom to pursue your interests within reason.
• Learning opportunities through courses, seminars and conferences.
• A stable working environment with flexible hours.
• A chance to make a meaningful impact on society through your work.

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Responsibilities:

• Be the Hadoop Subject Matter Expert to engage with customers to provide technological solutions as well as operational improvement recommendations Hadoop infrastructure platforms & Hadoop eco-system incl. Linux & storage
• Lead the teams on technical directions for the different Hadoop platforms that run 24x7 and support customer critical production operations
• Major Incident support (service recovering & root cause troubleshooting) for Hadoop and Hadoop eco-system incl. Linux & storage related issues, including communications to senior management and customer.

· Required to get “hands-on” where needed and work along the technical team

· Support the Hadoop Platform with the tools OOZIE, Apache Ni Fi, Java & Unix must knowledge

· Well-versed knowledge on Network, Storage and API’s creation and debugging

· Knowledge on supporting the applications on Big data platform and Debugging knowledge of YARN

· Write/debug Python code for the designed frameworks

· Control the Hadoop clusters with proper access controls and apply the security with the tools Ranger, Kerberos

· Coordinate with product vendors to setup/configure infrastructure, network, nodes

· Write automation scripts for any alerts and monitoring dashboards from automation perspective with Python

· Maintaining and troubleshooting the Environment with Ambari

· Integrate Solution knowledge between Hadoop and Reporting tools like Tableau, MicroStrategy, SAS, HDF

· Solutioning different Disaster Recovery approaches for Bigdata

· Tuning and scaling up clusters with several proposals

· Migrating the HDP clusters to CDP cluster or to the Azure cloud

Skillset:

· Hadoop Hortonworks admin or support L3 Knowledge

· Cloudera data platform admin

· Hive /Hbase SQL Tuning for map reducer jobs

· Shell/ Python Scripting experience

· Certification CDP Administration

· Certification RedHat Linux Administration added advantage

· MySQL/postgreSQL knowledge

· VMware Virtualization knowledge preferred.

· Knowledge on Pure and Isilon storage, S3 file systems is added-advantage

· Must be able to engage with technical people but also with semi-technical senior stakeholders and customer’s application teams

Years of Experience:

7 to 12 years overall Experience and 5+ Years of Big data Engineering and Production support