What you will do

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• High-speed NPU/GPU/CPU Subsystem RTL Integration experience or IP/Block/SoC Design experience is preferred
• Experience with Synopsys ICC2/FC (preferred) or Cadence Innovus tools from netlists to GDS
• Experience in high-speed processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Experience with timing signoff tools such as PrimeTime and Tempus and timing closure tools such as Tweaker and PrimeClosure
• Knowledge of high-speed/low power IP and custom circuit design
• Good communication and scripting skills

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

Main Responsibilities

1. Plan and execute layout designs for modules or single-chip circuits, including routing and verification tasks such as DRC, LVS, and EM checks.
2. Enhance product performance through optimized layout design techniques.
3. Collaborate effectively with design engineers to achieve layout design objectives.
4. Prepare and review tape-out data for accuracy and completeness.
5. Draft layout design documentation.

Requirements

1. Bachelor’s degree or higher in Electronics, Microelectronics, or related fields.
2. Direct experience in analog and mixed-signal IC layout design; familiarity with EDA tools such as Virtuoso, Calibre, and EM verification tools.
3. Proficiency in CMOS/BCD MOS processes and device structures, as well as layout handling for common package types.
4. Familiarity with common ESD protection device structures, principles, and full-chip latch-up protection methods.

5. Strong written and verbal communication skills in both English and Chinese.

6. Proactive, diligent, and capable of working under pressure; excellent learning, communication, and teamwork skills.

This role welcomes both fresh graduates and experienced engineers.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:

• Architect and lead the development of high-performance, user-centric iOS applications.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure application reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in iOS development, with experience in leading large-scale projects.
• Mastery of Swift, Objective-C, and iOS development frameworks.
• Extensive experience with performance optimization and profiling tools.
• Advanced knowledge of mobile security standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job title: IT Engineer

Work Location: Singapore, On-Site

Position Overview:

The IT Engineer is responsible for the IT Operations and Maintenance of the company. You will work closely with our Global IT Department to ensure the optimal performance, security, and reliability of our IT infrastructure.

Responsibilities:

IT Environment and Policy:

• Ensure a seamless IT working environment by implementing and enforcing IT policies and procedures according to our company guidelines.
• Provide responsive IT Helpdesk services and conduct necessary training sessions internally to enhance team proficiency.

IT Procurement Management:

• Oversee IT procurement activities, including but not limited to laptops, desktops, monitors, accessories, network devices, and software.
• Collaborate with vendors to ensure cost-effective and timely acquisition of IT equipment and services.

Server Management:

• Install and provide support for server hardware and operating systems.
• Manage Microsoft Active Directory, ensuring user accounts, permissions, and security policies are properly configured.
• Configure and maintain essential server components such as Antivirus servers, File and Print infrastructure, and other critical services.

Networking:

• Monitor, manage and enhance WAN/LAN accessibility and security.
• Collaborate with the network team to optimize network performance and address issues promptly.
• Implement improvements to ensure the reliability and efficiency of the network infrastructure.

Security Services:

• Implement and enforce IT security policies to safeguard organizational assets.
• Conduct vulnerability management to identify and address potential security risks.

Qualification/ Requirements:

• Bachelor’s degree or higher in Computer Science or related technical field.
• Minimum of 3 years of practical experience in IT.
• Hands-on experience in networking configuration, IT device maintenance, troubleshooting, and security reinforcement.
• Familiarity with Linux operating systems and system optimization is a strong plus.
• Proactive approach to handling responsibilities with a strong sense of duty.
• Excellent communication skills to effectively interact with team members and end-users.

Summary:

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

You will join the 'Thales Gemalto Digital First' project team to push forward the vision of 'Banking as a Service', combining card digitization, onboarding and risk evaluation platforms all in one for financial institutions to deliver optimized mobile-first experience for their customers.

You will be part of the driving force of our DevSecOps transformation, where we envision multiple teams working together on the same code base allowing full autonomy in solving problems presented by our customers.

Responsibilities:

• Implement solutions using Gitlab as a platform for source code, continuous integration and deployment
• Implement frontend component to provide generic secure services and cloud solution
• Be responsible for development/testing/deployment for the overall solution
• Participate in the design, implementation, maintenance, validation and documentation within a Scrum Team.
• Ensure quality metrics are met in terms of performance, scalability, maintainability, reliability.

Requirements:

• Minimum 5 years of relevant work experience in either JavaScript and TypeScript
• Knowledge on Java, version control system (Mercurial/GIT), build system (Jenkins/GITLAB)
• Familiar with agile methodology (Scrum)
• Understand the concept of DevSecOps
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills
• Knowledge in Kubernetes, Splunk, DataDog is a plus
• Knowledge in Docker, NoSQL (DynamoDB/MongoDB), MySQL is a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.

Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

Responsibilities:-

• Ensure precast produced in accordance to shop drawings
• Update of precast production status
• Carry out checks between precast plants
• Ensure precast quality in accordance to specifications

Requirement

• Minimum 2-3 years’ experience in precast management as a supervisor /
• engineer
• Able to work independently with minimal supervision
• Applicants with Precast Concrete Construction Course certification will have an
• advantage

The Service Provisioning Engineer is responsible for planning, configuring, and deploying telecommunication services to meet customer requirements. This role ensures efficient provisioning of voice, data, and internet services, working closely with internal teams and external clients to ensure high-quality service delivery and customer satisfaction.

Make an Impact by:

• Service Deployment: Configure, test, and activate telecommunication services, including voice, ethernet, and DWDM services.
  Implement network solutions to meet customer specifications and contractual commitments.
  Perform end-to-end service testing and troubleshooting during the provisioning phase.
  Integrate new customer services into existing network infrastructure.
  
• Technical Support: Provide technical guidance to customers and internal teams during service activation.
  Diagnose and resolve provisioning issues within SLA guidelines.
  Provide Level 2/3 technical support for provisioning-related issues.
  
• Collaboration: Coordinate with network engineering and vendors for smooth service implementation.
  Work with third-party vendors and partners to deliver seamless connectivity solutions.
  
• Documentation and Reporting: Maintain accurate records of provisioning processes and configurations.
  Prepare and update technical documentation, workflows, and user guides.
  Generate reports on service delivery performance and provisioning timelines.
  
• Process Improvement: Identify areas for improvement in the provisioning process to enhance efficiency.
  Assist in automating repetitive tasks and optimizing workflows.
  

Skills for Success:

• Diploma in IT or equivalent.
• Ability to work under pressure and meet tight deadlines in a fast-paced environment.
• Minimum 3 years of experience.
• Working on Saturdays (9am – 1pm) on a rotating basis will be required after the candidate trained.
• Working on rotating after office hours standby will be required after the candidate is trained.

Roles & Responsibilities

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and has impact on: Support production and operational functions.

Reports to: Global Service Lead, Cloud & Data Centre

Function: Global IT

Work Location/Site: Singapore, Global Headquarters

Role Overview

The Senior Global Infrastructure Engineer is part of the Global Infrastructure and Operations Team to ensure the stability, security, and efficiency of IT infrastructure services globally. The role is responsible for overseeing and managing Organization’s Azure cloud and on-premises IT Infrastructure. This role requires a proactive individual with strong technical skills and project management.

Duties and Responsibilities

1. Azure Cloud Management

• Deploy, configure, and maintain Azure Virtual Machines to meet organizational requirements.
• Design, implement, and manage Azure virtual networks, subnets, and connectivity solutions.
• Deploy, configure, and maintain Azure storage.
• Manage Azure Backup and disaster recovery to protect critical data and systems.
• Administer and secure access to Azure resources using IAM best practices, policies, and RBAC configurations.
• Set up, manage, and optimize AVD environments.
• Configure and utilize Azure Monitor for performance tracking, log analytics, and proactive issue resolution.
• Develop and enforce governance standards using Azure Policy to maintain compliance across the organization.
• Monitor and optimize Azure resource utilization and cost.
• Ensure timely patching and updating of Azure-based resources to maintain security and compliance.

2. Window Server Administration

• Install, configure, and maintain Windows Servers in VMware environment to ensure service delivery.
• Continuously monitor and optimize windows server performance, perform configuration changes to ensure optimal functionality and minimize downtime.
• Manage server roles and features such as AD, DNS, DHCP and file services.
• Implement and enforce Group Policies to maintain security and compliance across systems.
• Perform regular system updates, apply patches and backups to keep systems secure.

3. Storage and backup

• Implement, maintain, monitor and troubleshoot storage issue for SAN and NAS.
• Monitor storage performance and capacity, perform optimizations to maintain efficiency.
• Implement, maintain, monitor and troubleshoot Veeam backup.
• Ensure compliance with data retention policies and regulations.

4. Project Management

• Leading the implementation of IT Infrastructure projects.
• Deliver project scope, and deliverables as per agreed schedule.
• Proactively coordinate and communicate with stakeholders and team members.

5. Documentation and Reporting

• Maintain comprehensive documentation of IT infrastructure and processes.
• Prepare regular reports on IT infrastructure availability, performance and project status.

Experience

• 8+ years of experience in IT infrastructure management.
• Professional certifications e.g. Azure Administrator Associate, Window Server Administration, and VCP are highly desirable.
• Strong technical expertise and hands-on experience in Azure infrastructure solutions.
• Strong technical expertise and hands-on experience in Window Server services, Domain Controller, VMware, Netapp storage, Veeam backup.
• Experience in Linux environment is a plus.
• Ability to express thoughts and complex IT solutions clearly and in a simplified manner.
• Excellent problem-solving and analytical skills.
• Proven experience managing infrastructure projects and out of the box thinking to resolve challenges.
• Strong communication and interpersonal skills.

Skills/Accreditations

• Fluency in Mandarin language is a plus.

Academic Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or any diploma with an IT background

Travel requirements

• Occasional

*Position title and salary will be commensurate with relevant experience and qualifications.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.