What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Title: Engineer (ID6008)
Location: Depend on project
Working Hours: Mon to Fri 8：30am-5：30pm
Salary: $5,000 to $7,500

Job Description:
--To coordinate with consultants / subcontractors on the shopdrawings / samples / method statements and keep all involved parties updated of the latest changes.
--To attend to project / technical meeting and resolve site issues with owner / consultants in order for the site progress to proceed smoothly.
--To verify the work done on site are in accordance to the approved drawings / specifications / authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.
--To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimise delay to the construction progress.
--To ensure that the related documentations are updated and ready for ISO audit.
--To cooperate with the safety department and carry out the assigned duties within the safety framework.
--Assist site management team in project Planning & coordination.
--Plan and schedule work sequences for construction operation.
--Arrange and prepare documents for authorities’ submission for Conquas, RI, TOP etc.
--To study tender / construction drawings, specifications, and contracts to understand project requirements.
--Understanding of critical project criteria related to schedule & productivity.
--Must be a team player and ability to work in a cross-functional team environment.
--Strong oral and written communication skills.
--Able to work independently, proactive and self-motivated.
--Able to provide guidance to new staff / junior staff.
--Minimum of 5 years of relevant experience.

Work Location:
depend on project

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the Project Team of TopSKY-ATC (HE).

ROLE DESCRIPTION SUMMARY

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Verification and Validation Engineer, you are accountable for:

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

1. Mechanical experiments and design
   • Experiments - e.g. designing variations to the grout extruder to allow less waste and better reliability
   • Design - e.g. most of the upcoming v4 robot is being designed by interns with Jakub supervising them
2. Mechanical manufacturing, assembly and testing (only for R&D, our manufacturing is outsourced)
   • 3D printing - Slicing prints (often for multi-filament printing), managing and repairing printers (we have Tenlog TL-D3, TL-D5, Ender 3, Prusa i3)
   • Outsourcing manufacturing - specifying cabling, machining etc. to manufacturers
   • Machine tools - making some parts by hand when we need to quickly iterate
   • Assembly - putting in inserts, bolting parts together, waterproofing
   • Testing - testing the robot’s grout extrusion and cleaning, making minor adjustments to make sure everything is running properly and robot produces nice grout lines
3. Electrical experiments and design
   • Design - most of our PCBs have been designed by interns, aiming to minimise free wires in the robot, speed up assembly, allow easy modification where needed. Generally connecting all modules, controlling power, providing a physical user interface…
   • Experiments - e.g. sourcing and testing various motor and driver combinations to pick for our drive system
4. Electrical assembly (only for R&D, our manufacturing is outsourced)
   • Outsourcing production of cable assemblies and PCBs
   • Where necessary to make modifications - soldering PCBs, soldering power cables, crimping cables
5. Embedded programming
   • Writing object oriented C++ code
   • Keeping the code clean and maintainable
6. Robotics DevOps & Real World Industry Trials (expect to be on site 1-2 times a week)
   • Understand the whole project and run our ROS2 stack on real HW.
   • Create reproducible testing methodology and evaluate metrics on the HW.
   • Be in charge of the robots on the construction site.
   • Explore and procure new parts/new materials for robot functionality improvement

A great candidate would possess the following:

• Motivation to build a great product and great codebase using the most recent tech stack for the slowly coming robotics revolution
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Excited about robotics and similar technical areas and exploring them in extracurricular projects
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals

Site engineers are responsible for planning, marking out and levelling construction sites before any building work takes place. They also build roads, drainage systems and other vital facilities to make sure construction projects go off without a hitch.Organizing materials and ensuring sites are safe and clean.

• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

About Antina

Founded in 2020, Antina is a JV between Starhub Mobile and M1 and is responsible for the rolling out of the 5G Standalone (SA) Radio Access Network (RAN) in Singapore for the two mobile network operators.
The Standalone 5G (SA) RAN is a game-changing ultra-high speed, low-latency network, and one which will enable new use cases across entertainment, cloud gaming, transportation, education and healthcare. 5G is used across three main types of connected services, including enhanced mobile broadband, mission-critical communications, and the massive IoT.

Non-standalone 5G (NSA) was the first stage of 5G, using a new 5G radio (or 5G NR) access network overlaid on an existing 4G LTE network core. Standalone (SA) 5G uses the 5G NR access network on a brand new 5G network core. Both approaches provide value, but many of the most exciting new features and innovative use cases of 5G can only be realized through a standalone 5G network.

Purpose

The primary role of our Operations Engineer is to monitor and maintain 3.5GHz C-Band RAN systems to ensure operational efficiency and continuity for the company’s business.

Duties and Responsibilities

1. Carry out 24 x 7 daily monitoring of the 3.5GHz C-Band RAN systems’ faults and alarms.
2. Issue trouble tickets and tracked the fault resolution to ensure that any fault raised is responded to and resolved within the agreed SLA.
3. Coordinate with StarHub and M1 to develop, implement and maintain processes/procedures for daily operations, system configuration and maintenance activities.
4. Coordinate with StarHub and M1 to assess, plan, align, schedule and implement Change Request (CR) raised by StarHub and M1.
5. Generate monthly network performance and usage reports or any ad hoc reports upon request by StarHub and M1.
6. Coordinate and work with the equipment vendor, StarHub and M1 to test all gNode B software upgrade and patches with their respective 5G Core Network to ensure end to end compatibility.
7. Coordinate with equipment vendor, StarHub and M1 to schedule a mutually agreed timeline to load the software upgrades/patches to the live network.
8. Administer all system and user management functions of the 5G RAN OSS, which includes managing the access right of StarHub's, M1's and the equipment vendors, performing software and hardware upgrades, security functionalities and system maintenance (such as database maintenance).
9. For 5G Exploratory Platform (5GEP), to be the interface with IMDA to update on changes to network configurations, software versions and procedures.
10. Coordinate with StarHub and M1 to support project implementation and network expansions.
11. Interface with vendors and contractors on all operational and project support activities.

Requirements

Qualifications:

1. New graduate with NITEC, Diploma or Degree in Electrical/ Electronic/ Telecommunication or related qualification or possess at least two years of related working experience.

Technical Skills:

1. Preferable to have some knowledge in telecommunication networks, knowledge of cellular network would be an advantage.
2. Preferable to have some basic IP knowledge.

Interpersonal skills:

1. Maintain a strong learning attitude and able to keep up in a fast-paced environment.
2. Able to work independently and is also a good team player.
3. Possess good communication skills.
4. Strong commitment to work and have good initiatives.

How to apply

Apply here via myCareersFuture or send your CV directly to [email protected].

Antina is a company driven by ability and hardwork. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Visit our company website at www.antina.com.sg for more information.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Nitto Denko Asia Technical (NAT) Centre is looking for a highly motivated Field Marketing Specialist to support business development and operational efforts in the field of medical devices and digital health in new markets e.g. Indonesia.

Established in 2008 and backed by a 100-year-old Japanese corporation, Nitto Denko Corp., NAT seeks to elevate quality of life through innovative biosensing solutions.

We are transforming clinical research and health management through our proprietary technology developed in-house. Our years of research has led to the creation of multiple products, and we are now focused on driving adoption for a connected ecosystem behind our health wearable and a novel urine albumin to creatinine screening medical device. If you are looking to contribute meaningfully to the future of biosensing solutions and do work that can change the lives of people, we would be pleased to learn more about you.

By working with NAT, you will join a multidisciplinary team of thinkers and doers who come from different backgrounds. Everyone on our team is fully committed to realizing the potential of biosensing technologies to improve human health and wellness. You will report to Marketing Innovation Manager, and be responsible for both assigned, as well as self-initiated pilot projects. In the medium term, you will be tasked to assist with commercial planning in alignment with the organization’s business goals which include market research, business model identification and innovation, risk assessment to create sustainable business relationships with partners. You will also lead commercial assessment, discussions, and evaluations with potential collaborators. Your role will be impactful and diverse.

If the above resonates with you, please read on.

You are someone comfortable with ambiguity and will be highly independent. You see and create opportunities proactively and thrive on multiple initiatives in a fast-paced environment. You provide comprehensive assessment with minimal information and can handle both technical discussions as well as business conversations. You have an eye for detail and are a great listener, taking a consultative approach towards internal and external stakeholders. You create trust and optimism in your engagement with people.

Responsibilities and Duties:

• Assist with the identification and sourcing of business opportunities in the field of medical devices and digital health
• Create and develop a range of materials (e.g. presentation materials, fact sheets) to assist with internal reporting and external engagements
• Demonstrate product features and function, as well as support external stakeholders (e.g. customers or partners) with their queries and decision making process
• Drive Go-To-Market by leveraging on the lean start-up methodology
• Execute comprehensive competitive and commercial market research covering commercial traction, regulatory pathways, business model planning and execution
• Initiate and facilitate partner discussions and build a network of trusted partners and KOLs
• Manage internal and external commercial projects and be responsible for documentation and reporting
• Develop financial models and be comfortable with financial valuation methods and concepts such as break-even analysis, IRR, DCF etc
• Collaborate with consulting companies to drive project success and accelerate NAT’s goals
• Contribute to our culture of constant learning and improvement

Requirements:

• Degree in Business Management, Economics, Finance, Business or its equivalent
• At least 1-2 years of experience in digital health or medical device, highly motivated applicants with no prior experience are also welcome to apply
• Track record of successful engagements and negotiations with distributors
• Fluent in English and Bahasa Indonesia so as to liaise with the stakeholders of those speakers, proficiency in Japanese Language is an advantage
• IT-savvy
• Excellent written and oral communication
• Fast learner and team player
• Great time management skills, comfortable handling multiple projects simultaneously
• Possesses an “Always Day One” and execution mindset
• Is comfortable with ambiguity and can thrive independently in a fluid environment
• Focused on problem solving and passionate about our products and mission
• Some degree of international travel will be expected for the role

Job Description:

1. Attend Customer Design discussions.
2. Help Customer with Network Integration Activities.
3. Network Acceptance Testing
4. Help Customer with Network Migration activities.
5. Network Monitoring after migration or integration.

Job requirements:

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Basic understanding of software development processes, IT infrastructure, or other technical fields relevant to the organisation.

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. More than 4-year industrial work experience is preferred

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

· Attend technical clarifications meeting and/or presentations with customers

· Perform Wake frequency calculations (WFC) calculation including Thermowell design recommendation

· Create and issue Wake frequency calculations (WFC) certificate per Sales request

· Provide technical advice to internal staff and customers

· Perform design, prepare technical drawings and documentation as per customer’s requirement

· Provide technical support and/or propose alternative technical solutions to meet customer’s requirement

· Plan and establishes work schedules and gives direction to technical support engineers

· Provide advice to problem resolution

· Liaise with sales team for customers’ technical requirements and demands

· Provide technical advice to internal staff and customers

· Other technical or company process related activities that the manager would require

· Liaise with HQ person in-charge of explosion proof (ATEX, IECEx, FM Approval,) certification in case of changes to the design and technical documentation.

Candidates must be:

• 2D AutoCAD
• Experience Industrial Piping
• Instrumentation Background
• Comfortable to communicate with subsidiary in India and also Indian Drafter.

Job Duties:

• Complete responsibility for all aspects of WET department / sub function or has professional leadership within the company on a broad unique subject.

• Develops new methods of problem solving for department

• Integrates work of own department with other departments. Has to consider impact of solutions to other departments and find overall solutions; can be in global environment

• Generally solves issues in principle, leaves specifics to staff

• Has full staffing responsibility

• Highest authority of subject matter content

• Balances short term and long term goals

• Balances financial, resource and people issues

• Integrates subject matter and industry expertise within a defined area

• Accountable for budget and end results for area managed including cost management.

• Provides advice and counsel related to the operation of the business to leadership teams based on deep subject matter expertise.

• Work is guided by functional strategy and area goals and operational objective.

• Sets area objectives and work plans in alignment with functional strategy.

• Ensures that procedures, processes and standards are continuously reviewed, tested and aligned with the business.

Qualification

• Bachelor degree or above in Electrical, Electronics, Mechanical, Mechatronics, Microelectronics Engineering.

• 8+ years of relevant experience in process engineering, preferably in Electronics, Electrical industry.

• Fab 12" knowledge is preferred

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

• Designing and developing: Designing, developing, installing, managing, and maintaining equipment for monitoring and controlling engineering systems
• Ensuring safety: Ensuring that systems and processes operate effectively, efficiently, and safely
• Collaborating: Working closely with colleagues across several functions, including operations, purchasing, and design
• Preparing documents: Preparing and maintaining engineering project schedules, documenting and controlling engineering deliverables, and writing reports and documentation
• Analyzing data: Analyzing and interpreting data
• Providing technical support: Providing technical support

This position requires the applicant to be responsible for engineering and technical aspects within every project.

He/She will schedule, plan, forecast, resource and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion.

Job Scope:

Execute and revise project work plans to cater to changing needs and requirements

Supervise subcontractors’ works to ensure timely completion and adhere to various standards

Liaise with clients, senior engineers in preparation for site work and plan schedules

Keep Project Manager well informed of status of project and coordinate communications between various departments

Liaise with the design specialists on drawings, amendment and re-submission to clients

Assist in conducting site measurement and inspections

Communicate with subcontractors and other suppliers

Monitor the delivery schedule of equipment/material to site

Coordination and checking of engineering deliverables.

Prepare and submit project documents

Attend site and office meetings and prepare progress reports

Job Requirements:

Minimum Diploma in Civil and structure or equivalent

Fresh Graduates welcome

Keen to learn, possess positive attitude and able to work independently

Competent in MS Excel and Words

Working hours: Mon to Fri: 9am to 6pm, Sat: 9am to 1pm

Required to work on construction sites