• Collaborate closely with the technical manager or team lead to meet project SLA (Service Level Agreement) objectives.
• Responsible for the installation, configuration, and providing post-sale support for IT security solutions.

Requirements:

• Diploma and above.
• At least 2 years of experience in an IT security environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Major Responsibilities & Deliverables

• Manage the automation commissioning and design for a greenfield project.

• Design and implement process automation systems and solutions, to control and optimize pharmaceutical manufacturing operations.

• Ensure compliance with Standard Operating Procedures (SOPs), Health, Safety and Environment (HSE) regulations and Current Good Manufacturing Practices (CGMPs).

• Coordinating Automation Vendors to drive Department Objectives.

• Support the development in devising automation solutions that improve productivity, business operations and safety/quality standards.

• Assist the automation manager in terms of Design deliverables and proactively support the automation documentation activities.

• Take up responsibility to be on field and perform any troubleshooting for automation systems.

• Prepare and perform IQ/OQ, Test plans, SDLC documentation ensuring document meets the standards.

• Develop Automation protocols and assist the C&Q team.

• Ensure and manage the documents from the Vendors are delivered on time ensuring the quality.

• Read and understand the company Procedures and implement right procedures at right time.

• Review the technical documentation from vendors and approve as necessary.

• Urge to learn new technology and present the latest technologies available for automation and implement them as necessary.

• Manage the Production equipment from basis design to implementation stage.

• Expected to lead the software design, hardware design of the assigned production equipment.

• Work closely with Automation manager to ensure relevant timelines are met, quality of testing activities and ensure proper documentation is followed.

• Review the hardware panel and instrument selection by the team and ensure it matches the vision of the project.

• Implement the industry standard architecture and panel design by optimizing the cost with the highest quality deliverables.

• Manage the timelines with Vendors and ensure the project costing is kept under control.

• Review the System architecture, hardware/software design specifications, sub-systems interfacing points, detailed point schedules, control panel drawing etc.

• Review and validate technical choices compliance with the design (based on Technical Design Process).

• Ensure documentation relating to the project is properly and promptly dealt with in the correct contractual manner.

• Work with Vendors to support the Digitalization and IIOT to ensure the data storage and integrity is managed properly as per Standards.

• Work with suppliers to implement the latest off the shelf technology to ensure the product life cycle is managed as per industry standards.

• Manage the FAT of the instrument panels, controller panels on the vendor locations and ensure the system is qualified and maintained throughout the life cycle.

Required Experience & Qualification

• Principles of automation, automatic control systems and automatic manufacturing technologies.

• Must have worked on Bio process equipment such as Bioreactor, Chrome, VI, Filtration skids etc.

• Must have worked on DeltaV implementation (preferably greenfield).

• Should possess min of 15yrs of proven bio process experience and implementation in DeltaV.

• Communication protocols such as Profinet/Ethernet IP are must. Bus communication such as Profibus PA is added advantage.

• Proven SAT experience commissioning the production equipments.

• Responsible for hardware and software installation and maintenance.
• Assist in Microsoft Dynamic Navision ERP system and make Jet Reports.
• Develop and execute new EDI solutions and applications.
• Create and maintain EDI integration using XML.

Requirements:

• Diploma in IT or equivalent
• At least 3 years of hardware and software installation and maintenance experience and Navision Application support in Manufacturing function.
• Good knowledge of web development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a leading MNC company that manufacturing electrical & electronics components.

Job Scope:

• Development of Analog/Mixed-Signal circuits from specification to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation and integration.
• Schematic entry, corner simulation, layout consideration and post layout simulation.
• Work closely with layout engineer to conduct the physical implementation (layout), LVS/DRC layout verification, and chip floor planning.
• Responsible for layout optimization, error debugging, and post layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects and layout engineers to achieve full-chip integration, place and route, top-level verification and tape out.

Job Requirement:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Experience on CMOS Analog IC design
• Good design experience in Analog IC design involving two or more blocks
• Good design knowledge in ESD and Latch-up

Interested candidates who wish to apply for the advertised position, please click "apply now" or email us an updated copy of your resume in MS Word format.

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd

EA License No : 01C4394 | Ng Theng Yee | Reg No: R22108658

Job Responsibilities:

1. Process Optimization: Analyze and optimize plastics extrusion processes to meet product quality and consistency. Implement changes to enhance efficiency and productivity.
2. Quality Assurance: Develop and implement quality control measures to ensure final products meet or exceed industry standards. Collaborate with cross-functional teams to resolve quality-related challenges.
3. Equipment Management: Oversee and maintain extrusion equipment, ensuring proper functionality and addressing any issues promptly.
4. Data Analysis & Documentation: Collect and analyze process data to identify trends, variations, and areas for improvement. Maintain accurate and up-to-date documentation related to process parameters, equipment settings, and quality control measures.

Requirements:

1. Diploma or bachelor’s degree in chemical or plastics related field.
2. Experience in plastics extrusion processes, preferably in manufacturing environment would be an added advantage.
3. Strong knowledge of extrusion equipment, materials, and related technologies.
4. Excellent problem-solving and troubleshooting skills.
5. Effective communication skills and ability to work collaboratively in a team.

• Guide and oversee a team of technical professionals, including project and system engineers, to deliver project management, system commissioning, technical support, and pre-sales services. The aim is to meet customer requirements and fulfill the company's objectives.
• Set up clear communication within the team. Keep everyone informed about project updates, organizational changes, and other important information.
• Evaluate performance, establish goals, and offer feedback to team members to boost their performance and promote career development.

Requirements:

• Degree in Electronics Engineering or equivalent.
• At least 5 years of supervising a group of engineers experience in Security Industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

We're Bloomberg. From the largest sell-side institutions right through to the two-person hedge fund - we're an integral part of the financial markets workflow in every corner of the world. We provide our users with up to the millisecond market moves and analytics as well as connecting them with their counterparts and the wider community of 350,000 Bloomberg Terminal subscribers.

Our Sales teams are industry renowned for their subject matter expertise and platinum service levels. You'll have industry renowned training, not just when you join us, but continually throughout your career here. Just like we invest in our products, we invest in our people. It gives us the edge.
The Team:

Customer Account Management Support (CAMS) assist Enterprise Sales by managing large client projects and helping to tackle ongoing or complex unresolved issues. By having a detailed understanding of Bloomberg processes and procedures, CAMS can act in an advisory role to identify opportunities to improve internal efficiency and to enhance the client's experience. CAMS is a liaison between the customer, sales, and other internal groups; we follow-up with customer concerns and objections, and navigate them through to resolution. All whilst supporting company initiatives and maintaining excellent customer support.

The department is an exciting next step for somebody who excels at problem solving and project management, has strong communication skills, and who enjoys working directly with internal stakeholders and external clients. A passion for client relationship management and the ability to build a strong internal network within Bloomberg is crucial to be successful in this role.

As a CAMS representative, you will look after your own group of Sales teams and you are encouraged to be independent in this area by looking for ways to grow their business and educate their teams.

We’ll trust you to:

• Serve as a liaison between customers, financial product sales and all Bloomberg operational departments addressing customer requests
• Take ownership of escalated customer issues and bring them to resolution
• Analyze complex issues and formulate next steps and a clear path forward
• Collaborate with and influence internally various stakeholders and subject matter experts across business functions and levels
• Support projects around company initiatives and sales with ad-hoc reporting and requests
• Manage multiple projects at a time, while maintaining sharp attention to detail
• Think out-of-the-box in finding new solutions
• Identify opportunities to improve efficiencies and/or enhance the customer experience

You'll need to have:

• 3+ years of experience working in a Financial Services or Financial Technology company
• Previous support experience in a client facing environment (sales support, customer support, etc..)
• Experience managing multiple sales oriented projects
• Experience working with a wide range of internal teams and departments (i.e. legal, COO, sales, technical support, etc..)
• Strong organizational skills and attention to detail
• Tenacious and creative problem solving skills
• Self-starter with the ability to take a proactive approach in their role
• Strong presentation and communication skills in English
• Demonstrated continuous career growth within an organisation
• Bachelor’s degree or degree-equivalent qualifications

We'd also like to see:

• An interest in developing a career within the financial markets industry
• Demonstrated experience delivering high quality customer support experiences to clients
• Additional Asian language skill, for supporting our teams and clients across the APAC region

If this sounds like you:

Apply if you think we're a good match. We'll get in touch to let you know what the next steps are, but in the meantime feel free to have a look at this: https://www.bloomberg.com/professional/.

Why Bloomberg?

We’re individuals with diverse backgrounds, talents, and experiences who take on big challenges and create even bigger impact through our work. We’re interested in what makes you you, and how we can create opportunities for you to channel your unique, personal energy and grow to your fullest potential.

Learn more about our office and benefits:

Singapore | www.bloomberg.com/singapore

Bloomberg is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of age, ancestry, color, gender identity or expression, genetic predisposition or carrier status, marital status, national or ethnic origin, race, religion or belief, sex, sexual orientation, sexual and other reproductive health decisions, parental or caring status, physical or mental disability, pregnancy or maternity/parental leave, protected veteran status, status as a victim of domestic violence, or any other classification protected by applicable law.

Bloomberg provides reasonable adjustment/accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable adjustment/accommodation to apply for a job or to perform your job. Examples of reasonable adjustment/accommodation include but are not limited to making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment. If you would prefer to discuss this confidentially, please email [email protected](Americas), [email protected](Europe, the Middle East and Africa), or [email protected](Asia-Pacific), based on the region you are submitting an application for.

Audio Visual Engineer

• Salary: $3,200 - $3,750
• Working Days & Time: Monday to Friday (9am-6pm)
• Working Location: Ubi Tech Park

Job Scopes:

• System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Extron, Crestron, Yealink, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc.
• Study the schematic drawings to understand the technical & functional requirements to implement each solution.
• Assist in post deployment support.

Job Requirements:

• ITE/ Diploma in IT/Engineering/Audio Visual.
• Must have minimum 1 year of experience in System configuration, Testing & Commissioning for Audio Visual solution.
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, Yealink, Cisco, Logitech, etc.
• Experience in Crestron, Extron, AMX, Kramer automation programming will be an added advantage.
• Experience in DSP programming will be an added advantage.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Assistant Service Engineer / Service Engineer

• Salary: $2000- $3500
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Job Description:

• Must be able to perform troubleshooting on various electrical circuitry
• Engine and hydraulic knowledge with 2 years working experience in automobile industry (Electrical & Mechatronics) will be an advantage
• Assist Service Manager to manage the service department
• Able to lead a team of technicians and engineers to provide excellent service support

Requirements:

• Minimum Diploma in electrical and electronic or mechatronics engineering
• Posses Class 3
• Min 3 yrs experience

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Field Engineer

Salary: $4000 - $4500 + OT
Working Hours: 9am-6pm
Working Days: 5 Days [Monday - Friday]
Working Location: Bukit Batok

Responsibilities

• To Program KNX ETS program for upcoming projects
• To be able to handle electrical wiring and troubleshoot.
• To be able to handle project management on site.
• Able to coordinate with other sub-contractor on site for both lighting and lighting control system.
• To be able to operate 24/7 in the event of a maintenance contract project.

Requirements

• Higher Nitec in Electrical Engineering related field from a certified college.
• Certification in Electrical Technician field from an accredited institution
• Prefer 1 to 2 years’ experience in Building Automations
• Able to Identify and troubleshoot various electrical issues.
• Knowledgeable in lighting control systems
• Preferred Certificate of KNX Installer

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Conduct regular PLC and control system maintenance to optimize performance.
• Monitor system performance continuously to achieve maximum uptime.
• Coordinate projects for automation improvements, ensuring seamless implementation.
• Identify and troubleshoot system abnormalities, offering technical solutions.
• Initiate and lead continuous improvement projects for enhanced efficiency.

Requirements:

• Degree in Electrical Engineering or equivalent.
• Minimum 2 years in related working experience.
• Experience in PLC systems.
• Experience in ELV systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Summary / Purpose of Position:

Collaborate with traders and researchers to design, develop, test, and support proprietary trading platform to capture opportunities in electronic capital markets.

Essential Duties & Responsibilities for this Position:

- Build and maintain robust, scalable, and low latency trading software

- Participate in collaborative discussions and problem solving with multiple stakeholders

- Help improve and evolve software design and maintenance workflows and practices

- Mentor team members and improve knowledge acquisition and sharing

Qualifications, Skills and Knowledge Required:

- Bachelor’s degree or equivalent in a STEP/STEM field such as computer science, engineering, mathematics, or physics.

- Expert knowledge of modern C++

- Working knowledge of Python

- Experience with test driven development and continuous integration

- Experience developing software for Linux

- Understanding of software design principles and algorithmic complexity

- Desire to solve complex and novel problems in a collaborative environment

- Strong sense of ownership and urgency

- Ability to communicate clearly with stakeholders

- Logical problem solver with the ability to quickly understand new and complex concepts

- Pragmatic self-starter with a flexible can-do mentality

Summary / Purpose of Position:

Provide technical support across the company.

Essential Duties & Responsibilities for this Position

· Setup, configure, maintain, and troubleshoot third party software packages to support trading and development.

· Setup and configuration of desktops, laptops, printers, phone systems, and cameras.

· Maintain existing office infrastructure and design, plan, and implement improvements based on evolving needs on the business.

· Select and liaise with vendors for various office related projects.

· Update and maintain hardware and software inventory.

· Able to provide support off hours or perform ad hoc duties as required

Qualifications, Skills and Knowledge Required

· Diploma in an IT related field.

· Minimum of 3 years’ experience as an IT support specialist.

· Ability to provide technical support and resolve queries in a timely manner.

· Strong network troubleshooting and tech support skills.

· Clear communication skills in English.

Responsibility:

● Responsible for the research, design, development and application of smart

contract related technologies;

● Analyze current DeFi ecological projects and protocols, including but not limited to

decentralized payments, transactions, lending, derivatives transactions, etc.;

● Develop and connect related decentralized platforms according to project needs;

● Analyze the advantages and disadvantages of decentralized projects, security, etc.,

and provide constructive advice to the community;

● Mentor team members to refine their technical and architectural skills.

Requirements:

● Bachelor's degree in information security, computer science, or related.

● 5+ years of industry experience in software engineering;

● Proficiency in the development of Solidity smart contracts, experience in Dapp/Defi

development; experience in contract security;

● Advanced proficiency in programming languages, such as C++, Java, and Python,

Golang, etc..

● Understand the mechanisms of Compound/dYdX/Kyber/0x/makerdao;

● Ability to quickly iterate and ship code using test-driven development patterns;

• Be part of Technical team responsible for maintaining and ensuring the serviceability of all systems and equipment at Inflight Catering Centre (ICC) 1 & 2
• Be technically proficient in all aspects of maintaining, repairing and troubleshooting the full range of ICC systems and equipment (e.g. warehouse systems, material handling and automation systems, refrigeration systems, kitchen equipment, packaging and inspection machines, washing machines, waste management systems, etc.) and other technical related knowledge
• Manage, perform and ensure all maintenance activities and repair works are timely follow-through according to the assignment, maintenance schedule, procedures, checklists, manufacturer recommendation and completed within the timeframe
• Manage, perform and ensure all technical purchase requisition of spare parts, contracts and services are in accordance to the Company policies and follow-through to support the maintenance activities
• Manage, communicate and work professionally with all stakeholders to minimize systems and equipment downtime
• Be proactive in resolving technical faults, contributing initiatives and continuous improvements
• Always observe and follow all Safe Work Procedures and Food Safety requirements
• Always ensure Safe Work environment by housekeeping of all work areas and report any safety hazards immediately
• Perform and support other relevant duties and projects assignments if required

• Collaborate closely with the technical manager or team lead to meet project SLA (Service Level Agreement) objectives.
• Responsible for the installation, configuration, and providing post-sale support for IT security solutions.

Requirements:

• Diploma and above.
• At least 2 years of experience in an IT security environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications, and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions.

As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We currently have an opening for a Capacity Engineer (Data Center) role, to support capacity planning for the Data Center team of our client in Singapore which is a top global investment bank.

Responsibilities:

• Generate weekly reports to analyze DC infrastructure demands in the APAC region.
• Download and analyze the infrastructure demands provided by the Project Manager, and follow up with requestors to rectify them as per the corresponding comments/shortfalls raised.
• Monitor high-risk locations and question discrepancies.
• Assess demands for server additions in data centers, including checking respective data center capacity, tech refresh, installing new servers, and decommissioning old ones.
• Monitor project implementation within designated timelines.
• Track power consumption and physical rack space, including assessing maximum and current capacities for both power and rack space.
• Calculate the record rack space and power consumption values based the demands for each data center location.
• Coordinate equipment placement (EP) to ensure optimal utilization of resources.
• Address defects, ensuring all necessary information, such as justification and associated risks, is provided for approval in each demand.
• Manage decommission reports and ensure accurate data cleanup in the demand central system.
• Generate weekly and monthly reports on data center demands, defects, ad-hoc requests, and project pending fulfillment.
• Compile EP data and convert it into actionable insights for capacity planning.

Requirements:

• Minimum 2-4 years of relevant experience in capacity planning, data center operations, or a related field.
• Strong analytical skills with the ability to interpret data and identify trends.
• Proficiency in project management tools and techniques.
• Excellent communication skills for coordinating with various stakeholders.
• Ability to work independently and prioritize tasks effectively.
• Familiarity with data center infrastructure and equipment is preferred.
• Proficient on Excel and Pivots
• Knowledge in PHP scripting language will be an advantage

Our client is actively searching for a Management Support Officer, Family Medicine 2 yrs contract to join their team!
If you are a dynamic individual seeking a new career opportunity, read further!

The responsibilities of this role are:

This role will support in the planning, coordinating, and operationalising of the Phase I & II programmes under Department of Family Medicine (DFM).

Support team in planning, coordinating and operationalising Phase I & II programmes

• Support in tracking timelines for these programmes to ensure that all aspects are adequately covered.
• Support in tutor recruitment for all programmes.
• Support in planning and scheduling the various programmes. Notify tutors and students on details of teaching events.
• Create and tag tutors and students to learning events, assessment quizzes, teaching hours and feedback on Learning Management System (LMS).
• Populate all teaching materials onto LMS in a timely fashion for tutors and students.
• Create feedback events for all teaching sessions and tag tutors accordingly. Generate feedback reports for faculty’s review.
• Hosting of webinars over Zoom. Support tutors by hosting slides, Poll Everywhere and Zoom quizzes creation for webinars.
• Support and prepare materials (tutors’ handouts, scoring sheets, signages, carpark coupons, stationeries etc) for campus-based workshops.
• Liaise with stakeholders to book all required teaching facilities.
• Support in collating and checking mark sheets to achieve zero exam error for CA component (5 quizzes)

Support in strategic recruitment and appointment of adjuncts

• Arrange for interviews with teaching adjuncts. Coordinate site visits to adjuncts’ clinics to assess suitability for teaching.
• Partner AA to see through each appointee’s appointment journey from start to end.
• Coordinate onboarding matters such as access cards, car parking privileges etc for adjuncts.
• Maintain DFM’s database of appointees. Monitor their allocated FTEs and advise if there is a need to modify according to appointees’ teaching commitments.
• Track expiry dates of appointments and follow-up on re-appointment or cessation.

Administrative Support for finance & procurement matters

• Ensure timely payments to part time tutors and standardised patients
• Collate tutors’ teaching hours for Dean’s Office to compute and make PECT payments to teaching partners
• Procure office supplies, stationeries, laptops, IT accessories, softwares, etc

Other duties

• Organise meetings for department and programmes
• General admin duties such as mails despatch, filing etc
• Onsite support for Phase II, III & V clinical examinations

The ideal candidate will need to have the following qualities and experience:

• Diploma holder with 1 - 2 years of working experience
• Candidates without Diploma qualification may be considered if they have substantial experience
• Experience in planning, managing, and implementing programmes in a University setting.
• Team player, meticulous with ability to work independently and proactively.
• Strong interpersonal and communication skills.
• Resourceful with a creative ability to make things happen.
• Proficient in Microsoft Office Application (Word, Excel, and PowerPoint).
• Team player and meticulous

An exciting career awaits the right candidate! Click "Quick Apply" to register your interest now.

All applicants' CV will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be contacted.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

As a Software Engineer in Thales Embedded Product Development Team in ECC, you will participate in the design, implementation, validation and deployment of Embedded Products for major OEM customers.

A week in the life of an Embedded Software Engineer:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Knowledge, Skills and Experience:

• Degree in Electrical/Electronics/Computer Engineering, or related fields
• Proficient in C/Java programming languages
• 2-5 years of experience in embedded software development
• Knowledge of embedded technologies/ecosystem, software security or Javacard knowledge is a plus
• Team player with good communications and collaborative skills

Our client designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. They are currently hiring for Vision Application Engineer and will like to invite suitable candidates to submit your detailed resume to [email protected]

Vision Application Engineer

MAIN DUTIES AND RESPONSIBILITIES:

In house components development / evaluation:

• Camera: evaluate camera sensor sensitivity, response time.
• Light: select appropriate light source for respective application; check light intensity spreading.
• Optical / lens: select appropriate optical component, optimize the optical setup.

Evaluation on sample given by customer: provide evaluation report for customer.

• Report shall include optic setup: FOV., camera used, light type.
• Comments on finding.

New project / optical setup / 3D development: document the setup and finding.

Create system configuration report: prepared for OEM designer

• Define each application or station requirement:
• Optical setup
• What type of inspection module to be used?
• What type of interface is required – protocol used

Generate communication protocol doc for vision system based on configuration report:

• Prepared for OEM Software Engineer

Create standard components drawing (ACAD): new camera, new lights, new lens.

Create cable drawing:

New cables such as trigger cable, camera cable, light cable and I/O interface cable.

Create system drawing based on configuration report:

Schematic diagram for Mfg personnel

Testing of new software release

Provide application notes and manual for vision application.

Response to customer application enquiry.

Back up for service personnel.

EDUCATION AND EXPERIENCE

• Bachelor of Science in Physics or Optics Engineering with 2 years working experience
• Diploma holders in Mechatronics / Mechanical or Electrical & Electronics will also be considered
• Experience with ACAD drawing, optical design software, optical alignment and optical testing preferredt: document the setup and finding.

Responsibilities:

• Support global NPI (New Product Introduction) on product design and development.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-off and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.
• Overseas travelling may be required.

Requirements:

• Min. Diploma in Mechanical or Mechatronics Engineering.
• Proficient in using Solidworks software.
• Preferably with working knowledge and experience in taping machine, laser mark, jig & fixtures design.
• Positive attitude and self-motivated.