Job Purpose

Provide strong technical expertise and leadership in Process Development for project transfer and start-up. Work closely with teams to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead process development activities for project implementation to deliver results within projected timeline, excellent execution and documentation

• To lead and coordinate operational team on site and ensure line availability

• To provide technical provision, operation and availability of modules and line for studies, qualification and validation

• To support design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site

• To develop and execute equipment and processes validation run / plan

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation) or relevant discipline or equivalent
• Experience: 5-10 years working experience in contact lens or optical device manufacturing or similar environment
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement
• Good analytical and troubleshooting skill with systemic approach
• Good leadership and management skills

Duties/Responsibilities

Develop Structural & Architecture Design Drawings

1) Assists Technical Manager to prepare Structural & Architecture Design Drawings

2) Prepare erection and shop drawings with accurate cutting lists for fabrication purposes

3) Co-ordination between clients, fabrication, and site works on technical design specifications.

4) Liaise with QP on drawing submissions, approval, and amendments.

5) Prepare documents to submit to the regulatory/ authorities

6) Assist in coordinating QA/QC matters with fabrication dept.

7) Responsible for the up keeping and training of Tekla BIM Software

Prepare Risk Management Plan

1) Plan in advance for any emergency issue

2) Check and ensure the design drawing is accurate before fabrication to avoid re -work

3) Check and ensure the design drawing is accurate before installation on site

Participant in Tender Presentation and Projects Meeting

1) Work closely with Safety dept. for submission of method statements including list of equipment.

2) Attend site survey.

3) Attend progress meetings, discuss and suggest technical proposals.

Train the Technical Team & Innovation in Fabrication Design

1) Train a competent technical team on use of Tekla BIM software

2) Work with Fabrication Dept. to innovate fabrication design.

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Responsible for supporting the IT help desk services to ensure services are delivered to meet business needs and expectations, within SLA standards (response time and resolution time.
• Install and configure hardware and software applications.
• Manage user accounts, permissions, and access rights.
• Monitor and maintain IT systems to ensure their smooth functioning.
• Perform system backups and disaster recovery procedures.
• Support VOIP, conferencing and mobile service request.
• Liaise with other support teams, or product teams as required to resolve requests and issues in a timely manner.
• Act as a contact point between helpdesk operations, other teams (internal, external and vendor/supplier)
• IT assets and inventories management.
• Ensure proper documentation of all IT infrastructure setups, software licenses, and any software modifications.
• Design and conduct IT user training on systems under the IT Department's purview.

Requirements:

• Diploma in Computer Science.
• At least 5 years of MIS experience.
• Possess ITIL Certification or equivalent.
• Experience with Windows Servers, Active Directory, routers, and network switches is required.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

(a) Install, assemble, test, or troubleshooting of CCTV / solar photovoltaic (PV) systems / electrical wiring/cabling installation/ electronic circuit on the roof or other structure in compliance with site assessment and schematics.

(b) Perform other ad-hoc or general work as assigned by the Management.

(c) Engage in supply work activities when required (separate assignment on ad-hoc basis).

(d) Assist in planning manpower for work activities.

(e) Contribute to workflow improvement, planning and schedule sctivaties.

(f) Ensure proper housekeeping f spare parts, equipment and tools.

(g) Oversee the work of contractors to ensure safety requipment and operating standards are met.

(h) Perform on the jon coaching of team members.

Responsibility

• Test program design and development for new products and project management.
• Create and develop Automated Test Equipment (ATE) programs for both production and characterization testing of new products.
• Design and develop final test load boards and wafer sort probe cards.
• Conduct characterization testing, prepare test specifications, and define tests, conditions, and criteria.
• Possess strong digital and mixed-signal programming skills for ATE using C++/VB languages and scripting.
• Monitor and manage production test yields, including handling maverick lots and engineering lots.
• Perform hands-on test debugging, RMA analysis, and improve test solutions in both hardware and software.
• Establish cost-effective production test solutions.
• Enhance the technical competency of the team.
• Develop product test plans, schedules, resource requirements, and track project execution.
• Conduct product test reviews, approve test program releases, and maintain and improve the product test process.
• Any other duties as required

Requirements

• Experience with ATE test program development using C++ or VB
• Experience with Test Hardware Development (Loadboard and Probecard)
• Experience with using of Teradyne ATE testers, Chroma or others

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

Roles & Responsibilities:

• You are to carry out construction supervision of construction works as required under the BCA regulations
• You are to ensure that the design documentation is safely & accurately implemented on site
• You are responsible for the co-ordination of work on site and ensure construction safety
• You will undertake any other related duties as instructed by the Project Managers

Requirements

• Diploma/Degree in Civil Engineering or equivalent from Singapore or other tertiary institutions
• National Certificate on Construction Supervision from BCA or equivalent preferred
• Possess at least 10 years of construction site experience
• Registered as Resident Technical Officer accredited by IES/ACES
• Proficient in MS Word and Excel
• Proficient in Primavera Project Planning Tool
• Familiar in Primavera Project Planning Tool
• Familiar with local codes & regulations
• Good communications and interpersonal skills

Interested applicants are invited to submit your updated resume, stating current/expected salaries to: [email protected]

We regret to inform that only short-listed candidates will be notified.

Mandatory Skills

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

Mandatory Skills

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

• Basic up to $4,500

We are looking for Customer Service Engineer which able to work independently with good working attitude. Computer literate, and have good interpersonal skill, good knowledge in IT services is an advantage

Training will be provided.

Responsibilities

Solve customer problem related to POS, guide thru remote or onsite repair

To perform front-line after sales customer service support

Mandatory Skills

• Python development skills
• Pyspark development skills
• Java Spring boot knowledge and development skills.
• L2/L3 support skills
• Data analysis and support skills

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

• Basic up to $4,000

What the role is

You will be part of the IWMF Project Planning team (Civil and Structural) working on the development of the Integrated Waste Management Facility (IWMF) - a large-scale waste management infrastructural project.

What you will be working on

You will work closely with the appointed consultant and stakeholders to ensure overall project delivery as well as meet project timeline and the various milestones. You will be responsible for the following:

• Review the method statements for construction of temporary and permanent works, structural design submission, safety and quality assurance and to resolve technical issues;
• Verification of invoices & payment claims and review of variations orders;
• Conduct site inspections to ensure all engineering works comply with all relevant statutory standards, regulations and Code of Practice;
• Ensure that the design and construction work meet all technical requirements in accordance with contract specifications;
• Monitor project budget and cost reporting to NEA’s Finance and Procurement Department;
• Manage project stakeholders, multi-disciplinary consultant, site contractor team, Accredited Checker and other parties involved in the project;
• Identify potential design and construction related issues or contractual disputes and effect with appropriate solution;
• Review of Design for Safety documents and to ensure site safety requirements are adhered to on site; and
• Coordinate with other stakeholders including government agencies on any development issues.
• Witness and verify factory acceptance tests (FATs) of major structural components at local and overseas factories

What we are looking for

• Degree in Civil Engineering recognised by Singapore Professional Engineers Board
• Preferably with minimum 5 years of relevant infrastructure and building experience including site management experience.
• Knowledge and experience in planning, design and implementation of mega projects from commencement to completion
• Familiar with local statutory and regulatory requirements
• Good knowledge of geotechnical works and BIM
• Proficient in Microsoft Office and BIM software applications
• Prior project management or quantity surveying experience will be an advantage
• Good interpersonal communication, presentation and writing skills
• Able to undergo training and perform work at incineration plants, if necessary
• Able to work at construction sites and travel overseas for FATs and training
• As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

To apply, please proceed to https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-INTEGRATED-WASTE-MANGEMENT-TUAS-VIEW-BASIN/Executive-Engineer-Senior-Engineer--Project-Mgmt--Civil-and-Struc-Tech-Team-_JR-10000031387

Job Description:

• Lead a team of technicians to perform tasks for preventive maintenance/ corrective maintenance / overhaul of electronic system
• Write up of daily service report, indent of spares, coordinating of repair work with customer, liaising with customer for work follow-up and any required matters.
• Troubleshooting and resolving technical issues.
• With a scope including but not limited to the above.

Job Requirements:

• Diploma/Degree in Engineering field, prefer Electrical/ Mechatronics/ Mechanical Engineering
• Require working hands-on on electrical/ mechanical/ hydraulic system.
• Prefer candidate to possess class 3 driving license.
• Must be self-motivated and positive
• Able to sail for at least 2 to 5 days

*Working Location: Tuas & Changi

• Basic $3,500 - $4,500

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry, we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our Process Plant team within Chemtech division in Singapore as Senior / Process Engineer (Commissioning) to help us take Chemtech to the next level.

Purpose of the Job:

• Technical support to Sales and Project Managers; including meetings, presentations and technical discussions with customers.
• Represent ST and CTSG interests in all aspects of the contract or project (including the interests of other Business Units or CT units).
• Maintain good relations and contact with customer, and all relevant supplier, inter-CT company, CT Business Unit and/or functional department.
• Prepare technical documentation required within the company.
• Provide technical support (and training where required) to other APAC offices (STCN), if needed.
• Taking responsibilities for own work, and assist others in their work, to ensure successful completion of project.
• Act quickly on queries from others, work to schedule and specification or contract requirement and ensure on-time delivery of tasks assigned.
• Deputize for Process Engineering Manager, if required.
• Propose / initiate development topics and internal projects, where required.
• Propose and plan improvements to work processes and department operations.
• Guide, supervise, train and/or be mentor to employees, when required.
• Drive to be an expert in specific applications, technologies or process design aspects.

Main tasks and responsibilities:

• Prepare technical proposal and assist in commercial tender.
• Carry out tender reviews and order reviews
• Ensure that the specification or scope offered to the customer are within the capability, competence and capacity of the company.
• Be fully aware of contract scope and requirements, in so far, they affect process or other technical issues.
• Prepare technical calculations and documents; including (but not limited to) process simulation; PFD and mass balance; PID; selection, sizing and design of equipment; control philosophy and associated documentation; instrument selection and process data; plant operating instructions; functional description, lists, and others as may be required for Basic Engineering or a complete skid plant.
• Cross-check/review other engineers' process designs.
• Maintain and document design basis, design changes; signed design, check and review documents
• Prepare/maintain document list of process design documents, if need.
• Ensure that the project or customer process requirements are adequately conveyed and reflected in engineering design and installation.
• Review vendor/supplier documents for suitability and compliance to process requirements; make clarifications with vendors/suppliers if needed
• Prepare process guarantees documents, perform technical risk analysis and propose possible mitigation of such risks.
• Carry out plant start-up, commissioning, and plant trouble-shooting, including data collection, analysis and reporting, fulfilling guarantee test-runs and obtaining plant acceptance from customer. Start-up will comprise complete unit operations (not limited to around a column), membrane units, LLE units, as well as other PT technologies.
• Acquire knowledge of Sulzer unit operation products (mass transfer components, LLE, Evaporator, Separator), and technology required for continuous operation and growth of the company.
• Establish technical competence and expertise in certain applications or technologies; propose/plan own training where necessary, including non-technical fields.
• Ensure environmental friendly process design.
• Reporting to superior, or project manager, on workload, man-hour usage, project status.
• Review / check documentation prepared by employees in department.
• Establish / maintain process design procedures, guidelines, standards, templates for use by the department.
• Provide on-the-job guidance to employees for process design related issues, including attending meetings with them; including employees in other countries.
• Monitor project execution by new employees through all steps and periods of the project, from handover till start-up of plant.
• Review work processes and propose improvements.
• Plan and propose own training, in both technical or job-related skills, as well as in own managerial, supervisory or administrative skills.

Personal Strengths:

• A very strong customer service attitude and good negotiation skills.
• Analytical and problem-solving skills, for developing and implementing solutions to problems with assigned projects.
• Ability to interpret customer requirements and to design separations equipment and processes.
• Good foundation in process engineering as well as chemical separation.
• Strong communication and interpersonal skills.
• Strong interest in Separation Technology
• Can work well with Others in a Team

To succeed in this role, you will need:

• Degree in Chemical/Mechanical Engineering
• Min 5 years working experiences in Petrochemical and Chemical Field preferred.
• ProII / Aspen Simulation Program
• Microsoft Skills
• Distillation theory

Your benefits:

• Annual Leave
• Medical Benefits
• Variable Bonus
• Flexi Working Hours
• Long Service Award

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2022 in Switzerland. So come and join our story, starting today!

Job Description

Responsibilities

· Must possess hand-on experience to correlate, investigate and

resolve matters pertaining to quality information

· Co-ordinate with various departments and customer on quality

issues

· Follow-up other duties as required.

· Strong analytical, meticulous and problem solving skills

· Highly motivate and pro-active personality, with good

communication and interpersonal skills

· Knowledge and experience in ISO 9001, IATF 16949 and ISO 13485

Quality System would be advantage

· Pragmatic,hands-on and capable for multi-tasking

Requirements

· Diploma in Manufacturing/Mechanical Engineering/Quality or equivalent

· Minimum 3-4 years relevant experience

· Able to start work within short notice/immediately will be advantageous

• 5 days, Jurong, Transport provided
• $2800 - $3500 basic, yearly AWS and performance bonus
• Insurance covered (Medical and dental benefits)
• Career advancement
• Good environment

Description

• Assist in maintaining company Integrated Management System (IMS - ISO 9001, 14001 & 13485 requirements).
• Assist in planning, conducting and/or leading internal Integrated Management System (IMS) audit and handling customer audits.
• Assist in follow up with post audit activities, document findings and raise finding reports, expedite Corrective Actions on audit findings and their closure and verify effectiveness of the Corrective Actions.
• Support and coordinate with respective internal parties to be ready before and during external audits.
• Prepare and update standard procedures and instructions for use within the organization.
• Assist in preparing annual QMS review meeting and materials for presentation.
• Supervise & lead QA Supervisor, QA Line Leader & QA Inspectors for day-to-day operation.
• Plan and maintain training competency readiness of QA Supervisor, Leader & Inspectors.
• Prepare quality reports and documents as assigned.
• Monitor and coordinate equipment’s calibration.
• Ensure inventory of QA samples and documented information issued.
• Assist to resolve quality matters with Operation
• Maintain completeness of Device History Records (DHR) for all healthcare projects.
• Coordinate Corrective Action Request (CAR) for timely and completeness of correction and corrective action(s).
• Other tasks assigned by supervisor (and above)

Requirements:

• Minimum a Diploma in Quality Assurance, Engineering, Manufacturing or equivalent
• At least 1 year of relevant experience
• Positive attitude and a team player

Interested applicants, please send your resume to [email protected]

RESPONSIBILITIES

• Development and optimization of operation processes and feedback to concepts
• Manage out-tasking provider to carry out daily server operations.
• Quality and compliance check (e.g. vulnerability scans, patch and antivirus management)
• Automation of tasks and activities
• Optimization of the server landscape - On-premise and Cloud (regional and global)
• Installation, operation, and monitoring of Physical and Virtualized Windows Servers, Storage, and Backup Systems according to defined concepts and standards
• Space/Capacity Management
• Continuous performance analysis of server systems
• Continuous improvement of availability, quality, and efficiency of existing system solutions
• Participate in the rotating shift for 2nd/3rd level support
• Participate in Incident/Major Incident/Problem management activities
• Request fulfillment of Server Team related Services
• Actively share know-how in the Group and maintain continuous contact with the customers of the systems and areas under your responsibility
• Project support for IT/Customer projects
• Proactive optimization of existing system solutions
• Occasional outside-office-hour works for global meeting and maintenance work.

REQUIREMENTS

• This position requires a BS degree in Computer Science or comparable degree and 5 years of experience.
• Good expertise in handling Microsoft client and server operating systems as well as in the area of network technology (in an office and industry environment)
• Minimum MCSA: Windows Server 2016 or equivalent certification or knowledge is required.
• Knowledge / experience on Microsoft Azure Solutions are required.
• Server/Storage Hardware knowledge is required
• VMware VCP level knowledge is required.
• ITIL foundation level knowledge is required.
• Scripting knowledge such as Powershell is an advantage.
• Any other IT infrastructure certificates and/or experiences such as Storage, Network are an advantage.
• Several years of professional experience with expertise in the areas of IT Disaster Recovery and thereof Backup Restore for Server Infrastructure.
• Experience with IT infrastructure implementation projects
• Project management and/or provider management capabilities will be an advantage.
• Inventory management skill for the responsible scope is required
• The employee can make a decisions based on given standard operation manuals and procedures.
• Decision making ability for a group is an advantage.
• Adequate level of verbal and written skills in English is a must.
• Uses clear and effective verbal communications skills without supervision and provides technical guidance when required on expressing ideas, requesting actions and formulating plans or policies.
• Supports business processes without supervision by understanding and effectively using standard office equipment and standard software packages, while providing technical guidance as needed.
• Develop appropriate plans or perform necessary actions based on recommendations and requirements.
• Analyze data trends for use in reports to help guide decision making.
• Achieve full compliance with applicable rules and regulations in management and/or operations.
• Communicate with other people by speaking in a clear, concise and compelling manner.
• Review and create relevant, lucid and effective reports.

• MNC, 5 days, Tuas,Transport provided
• $3200 - $4200 basic, Allowances, OT claim
• Year end performance bonus
• On-the-job training is provided
• Friendly working environment

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1 year of relevant experience as Service Engineer in Marine industry
• Candidates with no experience can apply as on-the-job training is provided
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily and work overtime
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your resume to [email protected]

Job Summary

The IT Systems Engineer will be responsible for managing, maintaining, and enhancing our IT platforms and applications. This role requires a dynamic, resourceful individual with strong IT programming and database management skills. He/she will also need remote and onsite technical support to end-users, addressing hardware, software, and network issues to ensure the IT systems function well.

Key Responsibilities

1) System Management and Maintenance:

a) System Maintenance (API/Web/Mobile):

- Regularly update IT platforms and applications to ensure compatibility with the latest operating system versions. - Enhance performance and optimize existing features.

b) Security Patching:

- Apply security patches timely to protect against vulnerabilities.

- Conduct regular security audits and compliance checks.

c) Bug Fixes and Troubleshooting: - Identify and resolve system bugs or operational issues.

- Dedicated support for troubleshooting issues.

d) Database Management: - Perform regular backups of application data to prevent loss.

- Perform database recovery in case of data loss or corruption.

e) Restoration of Web/Mobile Application:

- Restore web and mobile applications in the event of the service outage.

2) System Enhancement

a) Implementation of New Modules or Functionalities:

- Develop and implement new system modules or functionalities as required.

b) Code Review, Refactor, and Optimization:

- Conduct regular code reviews to identify and correct inefficiencies and security issues.

- Refactor code to improve functionality and maintainability.

- Ensure adherence to the latest coding standards for high-quality software.

Qualifications

• Minimally a Diploma in Information Technology, Software/Computer Engineering, or a related field.

• Knowledge and experience working on 3-tier system architecture, Express NodeJS, ReactJS, and Flutter.

• Familiarity with Amazon AWS services, such as EC2 and RDS.

• Strong problem-solving skills, able to troubleshoot complex technical issues.

• Strong communication skills, providing technical support to end-users with different levels of tech savviness.

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Diploma in engineering or a related field.

Minimum 5 or more years' field and project experience.

Excellent computer literacy and knowledge of project software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

The Project Proposal Engineer plays a pivotal role in achieving project objectives within defined time and cost frameworks while ensuring full delivery scope and quality. This position involves a combination of technical expertise, project management, and customer-focused activities to support and drive sales. As a crucial link between the technical and commercial aspects of projects, the Project Proposal Engineer ensures customer satisfaction and successful handover to the Project Execution team.

This role will be based in Singapore, is part of the Sales Department ( Internal Sales Team ) and reports to the Customer Experience Manager.

The main tasks and responsibilities are:

Collaborative Sales Approach

• Partner closely with all stakeholders to serve customers effectively and meet team sales targets.

Proposal & Quotation Preparation

• Analyze requests for proposals to understand project scope, technical requirements, and customer expectations.
• Identify potential risks and propose mitigation strategies in proposals.
• Ensure proposals adhere to industry standards and compliance regulations.
• Utilize CEP and SAP systems to prepare accurate costings, quotations, and proposals for E+H products, services, and third-party packages.

Customer Engagement and Technical Assistance

• Summarize customer specifications and create a Deviation/Clarification list.
• Participate in technical clarification meetings with customers, clarifying E+H proposed deviations.
• Handle inquiries via various communication channels, provide technical assistance and advice, follow up on quotations, negotiate terms, close orders, and maintain customer relationships.

Cross-Department Coordination

• Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations and proposals.

Order Processing and Verification

• Verify customer Purchase Orders, convert quotations into sales orders, and process orders using the SAP system.

Customer Service and Problem Resolution

• Deliver exceptional customer service, build strong relationships, resolve problems, and address complaints effectively.

Additional Responsibilities

• Perform any other tasks required by the Company to support its business strategy.

Requirements

• Diploma or Degree in Control/Electrical/Mechanical Engineering or equivalent
• At least 3 years’ experience in Instrumentation and Automation/Control Engineering
• Relevant Technical knowledge (Would be an advantage)
• Strong project management skills (PMP certification would be an advantage)
• Proven track records and experience with project proposal
• Enthusiastic, dynamic, and customer-oriented personality
• Systematic and meticulous
• Strong ability to work effectively within a team environment.
• Ability to handle multiple tasks simultaneously and prioritize effectively.
• Excellent communication skills, both written and verbal

Not open to recruitment agency - Direct Hiring only

Job Description

• Designing work on electrical drawing.
• Plan & Monitor the design process.
• Maintain design documents and drawings.
• Coordinate electrical activities to meet project requirement
• Establish control standards and procedures to monitor the performance of electrical generating and distribution systems, motors and equipment
• Ensure design and component selection for advanced control system for material handling system such as airport baggage handling, air cargo and in-flight catering system conform to elevate codes, standards & customer specifications.
• Work closely with customer and consultant for design confirmation and sub-contractor on panel, switchboard fabrication.
• Any ad hoc duties as assigned

Requirements

• Degree in Electrical and Electronics Engineering or equivalent and above.
• Applicant must have related working experience (preferably 2 - 3 years of related experience in Industrial Automation or similar industry)
• Experience in motor control panel, control box and switchboard hardware design
• Familiar with system designs using PLC like: Siemens, Allen-Bradley, Omron, etc.
• Proficient with MS Office Program, Autocad and Eplan (latest version).
• Knowledge on designing in 3D layout will be an advantage.
• Proficiency in English (written and oral skills) is a MUST and ability to converse in Mandarin will be an advantage.
• A responsible, self-motivated, meticulous and resourceful team player with good organisational and communication skills.
• Ability to multi-task and work independently in a fast paced environment.