Job Description:

• Familiar with HVAC offshore / marine regulations and rules, such as, SOLAS, ABS, DNV, NORSOK, ASHRAE, ISO 7547, 8861 etc.
• Preparation of cooling load calculation, ventilation system design, air conditioning design, pressure drop calculation, duct sizing, grille/diffuser sizing, material take off etc.
• Responsible for HVAC equipment sizing and selection.
• Preparation of P&ID, D&ID and ducting layout drawings etc.
• Preparation of electrical single line diagram, cable block diagram, control diagram, termination diagram, electrical load calculation HVAC system logic diagram, HVAC Cable schedule etc.
• Ensure the HVAC system design and equipment selection are compliance with client specification, class regulation and hazardous area classification.
• Submission of HVAC/Architectural Design document and drawings for class approval.
• Technical submission (drawings and document) checking and revision control.
• Preparation of technical specification, technical bid evaluations.
• Interface with other disciplines and provide necessary guidance on HVAC/Architectural installation.
• Technical Clarification with Client and Vendor.
• Involved actively and monitoring the engineering, procurement, construction and commissioning HVAC system and architectural work.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Instruct supervisors/foreman on a day-to-day basis for work progress.
• Liaise with representatives, classification society surveyors and other to comply with inspection requirements.
• Resolve any technical problems or issues faced at work site.
• Monitors progress and instruct supervisors and foreman on safety and quality.
• Maintain the file copy of all latest revision drawings, approved procedures, client site instruction, project specifications, raised AFI and client signed reports for materialreceiving inspection and mechanical works for internal and external audits.
• Prepare Red-Line Mark-up as per site changes and submit to Engineering Dept to prepare as-built.

Job Requirement:

• Diploma/Degree in Mechanical Engineering
• At least 5 year experiences in Bolt Torque and Flange Management in Marine shipyard
• Experience in Marine HVAC installation and testing
• Experience in troubling shooting HVAC system and equipments

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

Big Data Developer (3 – 10 Years)
§ Good understanding of concurrent software systems and building them in a way that is scalable, maintainable, and robust
§ Experience in designing application solutions in hadoop ecosystem
§ Deep understanding of the concepts in Hive, HDFS, yarn, Spark, Spark sql, Scala and Pyspark
§ HDFS file formats and their use cases (eg Parquet, ORC, Sequence etc)
§ Good knowledge in data warehousing system
§ Experienced in any scripting language (SHELL, PYTHON)
§ HortonWorks distribution and understanding on SQL engines (Tez, MR)
§ Java/RestServices/Maven experience is a value addition
§ Control-M development. Monitoring Resource utilization using Grafana Tool
§ Good skillset to create automation scripts in Jenkins & knowledge in working on automating builds, test frameworks, app configuration etc
§ Experience in implementing scalable applications with fully automated deployment and control using Bitbucket, Jenkins, ADO etc
§ Skillset:
o Mandatory: Big Data – Hive, HDFS, Spark, Scala, Pyspark.
o Good to have : Schedulers (Control-M), ETL Tool – Dataiku , Unix/Shell scripting , Knowledge of Integration services of FileIT/MQ and others , CI/CD tools – Jenkins, Jira, ADO Devops – tools suite , Oracle .

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement.

Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

Ensure non-conformity report is being raised as and when necessary.

Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

You will be leading the mechanical testing laboratory.

- Minimum of 5 years of working experience in mechanical testing.

- Familiarity with international standards related to mechanical testing.

- Ability to work independently and improve job productivity.

- Strong communication and negotiation skills to discuss terms and conditions and update clients on job status.

- Capability to secure new jobs and contracts from clients.

- Lead a team of technicians to ensure jobs are completed on time and meet quality standards.

- Manage regular audits conducted by clients and the Singapore Accreditation Council.

Job Duties and Responsibilities:

• Supervision, executing and coordinate project activities.
• Ensuring that the project is on-schedule, within budgeted cost, and quality standards.
• Review project plans, specifications, and drawings to ensure accuracy and feasibility.
• Coordinating with Clients and Suppliers to develop project schedules, and resources plans.
• Attending Clients coordination and technical meetings.
• Supervise constructions activities.
• Formulation of Method-Of-Statement, Risk Assessment and Safe Procedure
• Involvement in both internal and external WSH Activities.
• Maintain accurate and comprehensive project documentation, including daily report, inspection records and As-Built drawings.

Job Requirements:

• Minimum Higher NITEC/ Diploma in Engineering or related field.
• Proficient in MS Office applications
• Possess valid Singapore Class 3 driving License
• Good team player with ability to lead and multi task
• Good interpersonal skills and communication skills

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

This role supports the Project Manager. It involves the planning and co-ordination of site work. The person in this role needs to be good at communication and obtaining feedback. Instructions must be given to site personnel in a manner that is easy to understand and the person needs to ensure his instructions are understood correctly. This person will also help the Project Manager with any issues that may arise on site.

Job Scope:
1.) Plan and coordinate site work
- Attend meeting with Main Con and work with PM to prepare relevant information i.e. drawings for approval.
- After approval, update Site Personnel of requirements.
- Prepare necessary permits, drawings to get clearance from authorities.
- Co-ordinate with PM, Site Supervisors and Main Contractor.

2.) Attend site meetings
- Ensure approved construction methods are communicated clearly to site personnel.
- Communicate frequently with PM and Site Supervisors.
- Prepare and pass updated drawings to Site Supervisors.
- Go through drawings and permits and explain to site personnel.
- Clarify with PM if unsure.
- Make decision on behalf of PM if there is a need on site.

- Please note that site can be by the roadsides, at substations or in tunnels. There will be some exposure to the elements.

3.) Submit applications for wayleave to relevant authorities.
- Process for application: Road Opening application, NCE, Purchase of Services Plan, Prepare drawing submission
- Monitor and submit site progress reports
- Submit weekly schedules to client
- Submit monthly progress report to PM

4.) Design of SOP

5.) Training of workforce to reach safety goalposts

Requirements:
- Possess certificate "Manage Workplace Safety and Health in Construction Sites (or Construction Safety Course for Project Managers)".

- Required to sign Permit To Work.
- Proven track record with SP group's projects in high voltage power cable installations.

- Candidates with class 3 license and/or their own transport will be viewed favourably.

- Working hours: Monday - Saturday, 8am-5pm

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Proficient in Microsoft office applications: Word, Excel, PowerPoint & Outlook

-Proficient in AutoCAD application

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

Shortlisted candidate will be notified

Job Description

• Plan and monitor Mechanical section on the manpower, equipment and resources
• Prepare construction specification in coordination with vendors for critical items and finalize installation procedures
• Prepare method of statements for Mechanical document submission on project basis
• MOS preparation and JSA arrangement for lifting and other site activities
• Study scope of work and documents concerning mechanical items / equipment
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works
• Liaise with Clients representatives, classification society surveyors and others to comply with inspection requirements
• Initiate and promote safety programs along with safety department like monthly safety committee meetings, JSA meetings, RA meetings etc
• Instruct foreman / subcontractors on a day-to-day basis for work progress
• Monitor progress; instruct supervisor and foreman on safety and quality matters
• Maintain the file copy of all latest revision drawings, approved procedures, clients Site Instruction, Project specification, JCS/JCF and prepare timesheet Form-A & Form-AA, Raised AFI and Client signed reports for Material receiving inspection and Mechanical works for internal and external audits
• Resolve any technical problems or issues faced at the work site
• Keep records of all works done
• Liaise and coordinate with other departments on project issues

Jobs Requirement

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 8 years of experience in Marine Shipyard operations
• Able to perform HVAC activities encompass a wide range of tasks related to the installation, maintenance, repair, and optimization of HVAC systems
• Highly motivated individuals with good organizational skills and leadership skills
• Able to adapt new work environment and able to lead independently
• Active and positive minded
• Proficient in MS Office applications (ie. Microsoft Excel)

• Metal Stamping Company
• Basic salary up to $5000
• Full Company Benefit
• 5 days 8.30am – 5.30pm
• Company transport from MRT Pioneer

Job Responsibilities:

• Provide technical tooling support to Tool & Die (T&D) and production teams, ensuring tools meet quality and efficiency requirements.
• Collaborate with the Design department and toolmakers to improve tooling performance and implement continuous improvement initiatives.
• Lead the tooling team in problem-solving, root cause analysis, and skill development through training and guidance.
• Coordinate with production and planning teams to prioritize schedules and ensure tool readiness for production needs.
• Manage tooling modifications, resource allocation, and support the Principal Engineer in their absence.

Requirements

• Preferably Diploma in Precision Engineering or a related field.
• Technical qualifications in Tool & Die Making will be advantageous.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

Key Responsibilities:

1. Administrative Support:

• Handle daily administrative tasks, including managing calendars, scheduling meetings, and coordinating appointments.
• Organize and maintain files, records, and documents (both digital and physical).
• Assist in preparing reports, presentations, and meeting agendas.
• Provide support in document preparation for internal and external communications.

2. Operational Support:

• Assist with monitoring and maintaining the organization's operational processes to ensure efficiency.
• Support in data entry, updating systems, and ensuring accurate record-keeping.
• Help track business operations performance and assist with project timelines.
• Coordinate and support logistical arrangements for business events, conferences, or travel.

3. Communication & Coordination:

• Act as a point of contact between departments, ensuring effective communication.
• Prepare and distribute internal communications, such as memos, newsletters, or updates.
• Communicate with vendors, clients, and other external parties as needed.
• Assist with resolving issues or queries from staff or clients in a timely manner.
  

4. Project Management Assistance:

• Assist with managing business projects by tracking progress and deadlines.
• Ensure project documentation is organized and accessible.
• Coordinate resources and logistics for project execution.
• Support project teams in conducting research and preparing reports.
• Support with customer relationship management (CRM) tools and processes.
  

Additional Information:

• Good interpersonal and communication skills
• Ability to work independently as well as a good team player
• Ability to multi-task in a fast-past environment

Interested applicants, please submit your resume by clicking APPLY NOW

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates will be notified

Perks of working at MCI Career Services

• Accessibility: 5 to 10 mins walk from Jurong East MRT
• Engagement & Celebrations: Birthday Celebration, Team Bonding, Dinner & Dance (D&D), Corporate Social Responsibility (CSR), Festive Celebrations etc.
• Leaves: Annual, Medical, Birthday, Festive Leaves etc
• Work Flexibility: Flexi Work schedule, 5 Days Work Week
• Recognition & Awards: Promotions, Top Sales, Appreciation Award , Monthly Commission etc
• Wellness: Comfortable massage chairs and therapeutic mini S.E.A aquarium for you to unwind and relax

Job Description & Requirements

1. Administrative & Operational support:

• Draft & prepare Letter of Appointment for Temp & Contract/ BPO staff
• Liaise with candidates to finalise LOA signingCollect relevant documents from candidates and upload documents to SharePoint payroll folders
• Responsible for consolidation of weekly and monthly reports for operations needs and generate statistical report as and when required

2. Job Portal Management:

• Post job advertisements on MCI Job Portal
• Respond to candidate’s queries promptly
• Monitor effectiveness of job portal in attracting candidates and escalate significant trends or issues to the Team Lead

3. Candidate Database Management

• Update & validate internal candidate database from other job portals e.g Jobstreet, FastJobs & MCF

4. Payroll Calculation

• Collect and validate attendance records, timesheets, and other payroll inputs.
• Calculate wages for temporary and part-time staff.
• Coordinate with Finance for payroll processing and address basic payroll queries.

5. Other ad hoc duties as assigned

Requirements

• Possess at least a diploma or degree, preferably in business-related fields
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook)
• Strong organizational, communication skills, attention to detail and willing to learn
• A good team player, able to work independently and meet deadlines in a fast-paced environment

If you have what it takes to perform the responsibilities of a Business Support Executive and interested to learn more about us, kindly click to APPLY NOW or email us at [email protected]. If you do not possess the above experiences, your application will still be considered on individual merits and you may be contacted for other job opportunities.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.**

Ong Jun Kiat

Registration Number: R23117387

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628