Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Mandatory Skills

1. Willing to work in shifts to provide rotational 24/7 shift application support duties as mentioned below.

2. Has experience or knowledge on Incident and Problem management.

3. Health check and monitoring production system and job scheduling to ensure SLA is meet.

4. Troubleshoot and solve production issues related to performance and reliability throughout the software stack.

5. Proactively identify bottlenecks in the system and work to resolve these issues before they become a problem.

6. Continuous improvement of the system, e.g. job automation, performance tuning.

7. Should be able to identify and fix the bugs.

8. At least 3-5 years of hands-on experience on troubleshooting the applications run on full stack preferably in Java, Spring-boot, Microservices.

9. At least 3-5 years of working experience, preferably in Banking or Anti money laundering.

10. At least 3-5 years of working experience in production support in banking applications running on Windows and Unix environments.

11. Should have strong hold on SQL server/Oracle databases and able to write/debug the SQL programs.

12. Good knowledge in Linux/Unix/Windows environment and scripting.

13. Hands on experience on monitoring tools like Grafana has added advantage.

14. Should be open to learn and adapt to new technologies.

15. Knowledge on GIT Bitbucket and Jenkins has added advantage.

16. Knowledge on Actimize/Hadoop has added advantage.

1. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
2. Need to support including night shift, weekends and public holidays

• Basic up to $3,000 – $3,800

Job Description:

- Assisting Ops Manager, includes but not limited to Operations, Logistic, Purchase Request, Quotation, and Administrative.

- Monitor SAP processes and resolve any issue in a timely manner with support from IT department.

- Prepare and consolidate presentation materials.

- Assist in ad-hoc duties assigned (tree planting, site visits etc)

Job Requirements:

- Diploma in Business Admin or equivalent

- Minimum 1 year experience as an operation administrator or in a similar position

- Strong organizational and administrative skills.

- Excellent communication skills, both written and verbal.

- Proficiency in Microsoft Office

- Knowledge or prior experience in SAP system will be an advantage

We are the Mercedes-Benz IT Regional Competence Center for Data Analytics, based in Singapore, providing support to 18 global markets in the realms of Data Analytics and Data Science.

Our core responsibilities encompass innovating, managing, and overseeing the Regional Data Lake and Refinement layer. This involves facilitating the integration of data from diverse sources, primarily focusing on Sales and beginning with Aftersales data. Within our gold data layer, we refine raw data into comprehensive insights, covering over 100 KPIs at the regional level. These insights unveil patterns, trends, and growth opportunities crucial for business decision-making.

Moreover, we spearhead various data science use cases tailored to different markets. Currently, we are looking for a Data Engineer to spearhead the design and execution of data product delivery processes. This role involves close collaboration with business stakeholders to define data requirements and generate digital value for the organization.

The incumbent will be tasked with:

1. Data Strategy and Product Delivery:

• Investigating and comprehending the data landscape.
• Designing, developing, and managing standardized regional templates/data products.
• Ensuring the availability, reliability, and usability of KPI data.
• Aligning and steering topics in line with the target data analytics landscape.
• Managing the data analytics roadmap, epics, and sprints in conjunction with product owners.
• Developing UDP (KPI dimension and metrics) for Region Overseas and its markets.
• Implementing a Data Quality Framework (DQF) and creating DQF dashboards to facilitate a data-driven business approach.
• Agile planning with product owners to develop and refine products.
• Documenting processes for data products, sourcing, and dataset development.
• Supporting DevOps implementation on the platform.
• Cultivating a 'data-driven organization' culture.
• Informing relevant business objectives of our key customers (e.g. MS/O and Overseas Markets) and ensuring digital value of the products.
• Providing consultation to markets and business on UDM and Data Quality implementation.

2. Product and Project Management:

• Collaborating with stakeholders to co-develop a future-oriented roadmap.
• Driving IT products and features through their lifecycle, from idea to implementation and operations in a fast-paced environment
• Translating product roadmap features into requirements including features, user stories and UAT criteria.
• Working with cross-functional teams to review business needs regularly, to refine priorities, outline milestones and expedite deliverables.
• Identify opportunities and risks at all stages.
• Prioritizing and maintaining the sprint backlog using agile methodologies.
• Establishing and implementing rollout plans to meet business needs effectively.
• Aligning Scope, Timeline, Roles, and Responsibilities with various stakeholders (globally, regionally and locally).
• Adapting project activities as needed for the region.
• Ensuring adherence to IT strategies at headquarters and regional levels.
• Managing project budgets and ensuring regular communication on progress.
• Key responsible for end-to-end co-ordination of all projects rollout activities.

3. Partner Management:

Internal MB

• Facilitating communication between HQ and Overseas regions on application activities.
• Providing market requirements and strategies to align HQ and regional needs.
• Managing stakeholder expectations.

External vendors

• Managing vendors through the SDLC process.
• Collaborating with vendors to develop approved regional solutions.
• Ensuring vendor delivery aligns with specifications and KPIs.
• Supplier management and steering of external employees

4. General Responsibilities:

• Maintaining up-to-date procedure and documentation for all applications.
• Ensuring compliance with all procedures and expectations.
• Fostering a "data-driven organization" culture and supporting relevant business objectives.
• Providing market and business consultation on data infrastructure and science capabilities.
• Support the team in removing blockers and impediments.
• Conducting team performance discussions and reviews, together with General Manager

In summary, this role is pivotal in driving the organization towards a data-centric approach, ensuring the delivery of valuable insights and solutions to drive business growth and efficiency.

QUALIFICATIONS

• Relevant Bachelor's or Master's Degree in relevant IT-related field.
• Minimum of 5 years of experience in IT, with at least 3 years of strong involvement in automotive or similar industry.
• Familiarity with ITIL and experience in people management.
• Extensive knowledge of the MS Azure platform.
• Proficiency in Data Modelling Concepts, including ER Model and Start Schema Model.
• Experience with Reporting Tools, Python, SQL experiences.
• Customer Oriented and demonstrated empathy.
• Outcome-driven and adept at creative problem-solving, possessing a strong positive mindset.
• Strategic thinker with a focus on bridging business and IT interactions.
• Good understanding of Automotive Business operations.
• Proficient in Program and Project management, with experience in international rollouts.
• Experience in working within a multi-cultural and distributed organization setting.
• Excellent communication and presentation skills.
• Strong leadership abilities and a collaborative team player, capable of working in an international and intercultural environments.
• Familiarity with agile methodologies and adaptability to fast-paced environments.
• Strong analytical and problem-solving skills, with proficiency in IT processes and management.
• Knowledgeable in data visualization tools such as Tableau or Power BI.
• Understanding of data integration, data quality, data governance and database technologies
• Ability to translate analysis findings into actionable business recommendations and insight.

This position is based in location Singapore. A valid and approved work visa is required for employment in Singapore in accordance to local labour law regulations. We regret to inform you that only shortlisted candidates will be notified.

• Basic up to $4,000 – $6,000

Job Summary

1. Assist the Clinical Therapist (PT) / Rehab Section Lead in the provision of clinical, administrative, and managerial tasks assigned.

2. To submit clinical outcomes report (Centre-based rehab services) and rehab statistics (Monthly / Quarterly) to Rehab Head

3. Participate and conduct clinical meetings and training for junior therapy staff as and when required.

Clinical Roles:

1.To conduct the therapy treatment as instructed by the therapist (PT/ OT) under his / her direct or indirect supervision.

2.To update any changes in the client’s clinical condition/therapy treatments in the therapy records as and when needed.

3.To strictly follow the safety handling procedures/infection control measures (PPE) during the delivery of therapy services

4. To conduct the patient satisfaction survey/feedback from the clients on therapy services rendered after the completion of required therapy treatments/time of discharge/cancelation of therapy service.

Job Requirement

* Locally trained with Therapy Support Course Certificate
* Possess a passionate disposition to interact and care for seniors

* Computer skills (MS word/ excel) if any (added advantage)

* Possess a positive, good interpersonal and communication skills

* Good Team player

We are seeking System Engineers responsible for the design and implementation of Communication Systems for military and/or commercial applications.

The candidate must be able to work in a fast paced and dynamic environment.

He/She will work with our experience team members to provide cutting-edge technology to the customers.

Responsibilities includes:

• System Engineering Design,
• Generating Test Plan & Procedures,
• Sourcing and Procurement of System Hardware,
• Planning and Setting up Test Lab,
• Conduct Factory Acceptance Test,
• Manage Installation, Checkout, Integration and Testing (ICIT) at customer’s sites,
• Perform Troubleshooting and Resolving System Faults,
• Perform On-Site Acceptance Test,
• Managing project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation.

Requirements:

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Excellent Oral and Written Communication Skills
• Computer literate e.g. MS office, Visio
• Excellent Time-management
• Good Learning Capability
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred.

The candidate will thrive in a work environment that requires strong problem solving skills, good interpersonal and communication skills, coupled with the ability to work independently and in team setting.

Mandatory Skills

1. Willing to work in shifts to provide rotational 24/7 shift application support duties as mentioned below.

2. Has experience or knowledge on Incident and Problem management.

3. Health check and monitoring production system and job scheduling to ensure SLA is meet.

4. Troubleshoot and solve production issues related to performance and reliability throughout the software stack.

5. Proactively identify bottlenecks in the system and work to resolve these issues before they become a problem.

6. Continuous improvement of the system, e.g. job automation, performance tuning.

7. Should be able to identify and fix the bugs.

8. At least 3-5 years of hands-on experience on troubleshooting the applications run on full stack preferably in Java, Spring-boot, Microservices.

9. At least 3-5 years of working experience, preferably in Banking or Anti money laundering.

10. At least 3-5 years of working experience in production support in banking applications running on Windows and Unix environments.

11. Should have strong hold on SQL server/Oracle databases and able to write/debug the SQL programs.

12. Good knowledge in Linux/Unix/Windows environment and scripting.

13. Hands on experience on monitoring tools like Grafana has added advantage.

14. Should be open to learn and adapt to new technologies.

15. Knowledge on GIT Bitbucket and Jenkins has added advantage.

16. Knowledge on Actimize/Hadoop has added advantage.

1. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
2. Need to support including night shift, weekends and public holidays

Mandatory Skills

1. Willing to work in shifts to provide rotational 24/7 shift application support duties as mentioned below.

2. Has experience or knowledge on Incident and Problem management.

3. Health check and monitoring production system and job scheduling to ensure SLA is meet.

4. Troubleshoot and solve production issues related to performance and reliability throughout the software stack.

5. Proactively identify bottlenecks in the system and work to resolve these issues before they become a problem.

6. Continuous improvement of the system, e.g. job automation, performance tuning.

7. Should be able to identify and fix the bugs.

8. At least 3-5 years of hands-on experience on troubleshooting the applications run on full stack preferably in Java, Spring-boot, Microservices.

9. At least 3-5 years of working experience, preferably in Banking or Anti money laundering.

10. At least 3-5 years of working experience in production support in banking applications running on Windows and Unix environments.

11. Should have strong hold on SQL server/Oracle databases and able to write/debug the SQL programs.

12. Good knowledge in Linux/Unix/Windows environment and scripting.

13. Hands on experience on monitoring tools like Grafana has added advantage.

14. Should be open to learn and adapt to new technologies.

15. Knowledge on GIT Bitbucket and Jenkins has added advantage.

16. Knowledge on Actimize/Hadoop has added advantage.

1. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
2. Need to support including night shift, weekends and public holidays

Key Roles and Responsibilities:

• Ensures that email infrastructure at the client site is configured, installed, tested, and operational
• Performs necessary checks, apply monitoring tools and respond to alerts
• Identifies problems and errors prior to or when it occurs and logs all such incidents in a timely manner with the required level of detail
• Assists in analysing, assigning, and escalating support calls
• Investigates third line support calls assigned and identify the root cause of incidents and problems
• Reports and escalates issues to 3rd party vendors if necessary
• Provides continuous feedback to clients and affected parties and update all systems and/or portals as prescribed by NTT
• Proactively identifies opportunities for work optimization including opportunities for automation of work
• Coaches L2 teams for advance technical troubleshooting and behavioural skills
• May manage and implement projects within technology domain, delivering effectively and promptly per client agreed upon requirements and timelines
• May work on implementing and delivering Disaster Recovery functions and tests

Knowledge, Skills and Attributes:

• Hands on experience in managing enterprise email security solutions
• knowledge on Cisco email security solution - ESA (Email security appliance) , Threat Grid, Antimalware protection systems
• Ability to communicate and work across different cultures and social groups
• Ability to plan activities and projects well in advance, and takes into account possible changing circumstances
• Ability to maintain a positive outlook at work
• Ability to work well in a pressurized environment
• Ability to work hard and put in longer hours when it is necessary
• Ability to apply active listening techniques such as paraphrasing the message to confirm understanding, probing for further relevant information,and refraining from interrupting
• Ability to adapt to changing circumstances
• Ability to place clients at the forefront of all interactions, understanding their requirements, and creating a positive client experience throughout the total client journey

Academic Qualifications and Certifications:

• Bachelor's degree or equivalent qualification in IT/Computing (or demonstrated equivalent work experience)
• Certifications relevant to mail hygiene security such as Cisco email security or equivalent

Required Experience:

• Minimum 5 years IT experience with 2 years experience in supporting large scale email security environment.
• Seasoned working knowledge of ITIL processes
• Seasoned experience working with vendors and/or 3rd parties

The L2 System Engineer is responsible for:

• Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.
• Performing system recovery if needed.
• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.
• Ensuring that the System runs according to contractual specifications after problem resolution.
• Providing advice on system / database performance monitoring and tuning.
• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.
• Complete all Service Requested accordingly to SLA timeframe.
• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.
• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.
• Coordinating system development tasks to include design, integration and formal testing on the Change Request.
• Overseeing all transitions into production on the Change Request.
• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.
• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.
• Managing and document system configurations on the Change Request.
• Perform troubleshooting and resolve incident based on SLA.
• Generating the relevant administrative records and reports.
• Standby after office hour.
• Past working experience in Cloud environment is an advantage
• Able to handle demanding service response and recovery turnaround
• Able to manage daily support tasks to meet stringent SLA requirements
• Excellent scheduling and multitasking skills
• Meticulous and process-oriented
• Good, hard-working attitude with ability to work well under pressure
• Good communication skills English (written, spoken)
• Good analytical skills with ability to work with others to resolve problems.
• Good organization skills, with ability to properly document and track information.
• Preferably with Microsoft Certification and/or ITIL certification.
• Dynamic, customer oriented, experience working in a fast paced environment.
• Good Knowledge of following products will be advantageous:
• Linux,Unix,Active Directory/DNS,Microsoft Azure Stack,Microsoft Windows 2008-·2016,Commvault Backup and Recovery,Symantec Endpoint Protection
• Degree/Diploma in Computer Science, Computer Engineering or equivalent, although
• consideration will be given to experience and certifications in lieu of degree.
• Minimum 3 to 5 years IT experience

Position Overview:

We are seeking a skilled IT Executive to play a key role in IT automated storage and retrieval machine

projects, customer warehouse integration, and providing advanced support

In this role, you will contribute to project execution, deliver exceptional customer support, and

ensure smooth Your technical expertise and customer-centric approach will be integral to our

success.

Responsibilities:

IT Projects Implementation:

• Assist in software project implementation of warehouse automated storage and retrieval

machine for customer, including supporting integration to customer ERP system, IT

infrastructure and customers networks.

• Collaborate in setting up the machine, configuring software,

• Performing UAT/SIT,Software user Training for customer and internal staff, Software Go live

support

• Document IT projects comprehensively, outlining processes, configurations, and outcomes.

• Conduct IT site visits to assess requirements, troubleshoot issues, and gather insights for

improvement.

IT Service support:

• Provide remote helpdesk and onsite support services for customers, addressing their

technical needs promptly and professionally.

• Be stationed onsite on scheduled days to offer hands-on IT software support and ensure

customer satisfaction.

• Prepare detailed IT service reports for accurate tracking and analysis.

IT Tasks and Ad-hoc Duties:

• Undertake various IT-related tasks as required to support onsite customers effectively.

• Respond to IT ad-hoc duties assigned by the Supervisor, demonstrating adaptability and

versatility.

Qualifications & Requirements:

• Minimum of a Diploma or higher in Computer Science, Information Technology, or

equivalent field.

• Available to travel for support customer in Singapore & Malaysia

• A minimum of 3 years of hands-on experience in a similar position.

• Mandatory experience in software application support, with exposure to systems like

inventory, warehouse management, ERP.

• Familiarity with basic IT infrastructure, server setup, and network troubleshooting.

• Effective communication skills to liaise with team members, customers, and vendors.

• Proficiency in escalating technical and customer inquiries clearly to technical teams and

superiors.

- 5days works, office hour

This is a global role that offers a unique opportunity to combine your coding expertise with a critical understanding of compliance and regulatory requirements.

The Artificial Intelligence (AI) Engineer is tasked with the responsibility to evaluate the safety and performance of AI in medical devices and ensure that manufacturers comply with specific regulations, standards and legal requirements.

You will be the bridge that ensures coding excellence meets the highest industry standards to shape the future of our world’s innovative solutions.

Key Responsibilities:

• Safeguard the next generation of new medical products from software-related risks that can potentially harm patients and users.
• Be the fore-front expert in Artificial Intelligence, Machine Learning and Deep Learning Technologies best practices.
• Conducting thorough reviews of code for quality, correctness, efficiency, and adherence to regulatory requirements and coding standards.
• Identify performance and safety issues, logical errors, potential security vulnerabilities, and deviations from coding standards.
• Provide constructive feedback to manufacturers on compliance issues and deviation from best practices.
• Review usability studies and human factors engineering documentation to ensure that AI systems are designed for safe and effective use
• Deep understanding of technical documentation requirements for software-enabled medical devices, including but not limited to AI algorithms, identifying potential hazards and evaluating risk mitigation strategies specific to AI.
• Evaluating risk management files for software-enabled medical devices, including risk analysis, risk evaluation, and risk control measures to ensure appropriate identification, assessment, and mitigation of risks throughout the product lifecycle.

Key Requirements:

• Bachelor’s or Master’s degree in computer science, Software Engineering, Biomedical Engineering, or a related field
• At least 2 years of experience in software development and/or AI technologies (this includes the time for master’s & PhD Thesis)
• Preferably with 4 years exposure in the medical/ healthcare industry with knowledge on medical standards and regulations for example, ISO13485, EU Medical Device Regulation (MDR)
• Strong communication skills to communicate effectively with customers and internal teams, and articulate assessment findings clearly and professionally.
• Strong technical writing abilities to provide clear and concise feedback on the technical documentation and communicate assessment findings effectively.
• The ability to work independently and as part of a team and under pressure to meet deadlines and maintain confidentiality.

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Description:

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.

Responsibilities :

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Career Summary:

We are seeking a dynamic and knowledgeable Technical Sales Engineer to join our team. The candidate will have a strong background in electrical engineering and proven experience in selling battery solutions to clients. The Technical Sales Engineer will develop and implement effective solution-selling strategies at all levels within assigned industries and locations. He/She will be responsible for driving sales, building and maintaining customer relationships, and providing technical support and expertise related to battery specifications and applications.

Role Responsibilities/Learning Outcome:

1) Sales and Business Development:

• Identify and develop new business opportunities and sales channels for battery products.
• Build and maintain strong relationships with existing clients, ensuring their ongoing satisfaction and loyalty.
• Conduct market research to understand industry trends, customer needs, and competitive landscape.

2) Technical Expertise:

• Demonstrate in-depth knowledge of battery specifications, including Vanadium and other battery technologies.
• Provide technical support and guidance to customers on product selection, application, and troubleshooting.
• Conduct product presentations and demonstrations to potential and existing clients.

3) Customer Relationship Management:

• Act as the primary point of contact for clients, addressing their queries and concerns promptly and professionally.
• Develop and deliver proposals, quotations, and contracts that meet customer requirements and company standards.
• Follow up on sales leads and opportunities to convert them into sales.

4) Collaboration and Teamwork:

• Work closely with the engineering and product development teams to ensure alignment between customer needs and product offerings.
• Participate in industry events, trade shows, and conferences to promote the company and its products.

5) Reporting and Documentation:

• Maintain accurate records of sales activities, customer interactions, and sales forecasts.
• Prepare regular reports on sales performance, market trends, and customer feedback.
• Ensure all sales processes and documentation are compliant with company policies and industry regulations.

Job Requirements:

• Bachelor/master’s degree in electrical engineering or related technical discipline.
• Minimum 2 years of experience as a Mechanical Engineer with design & manufacturing knowledge
• Proven track record of meeting or exceeding sales targets, particularly in selling battery solutions or related electrical products.
• Strong understanding of battery technologies, specifications, and applications
• Proficiency in using CRM software and other sales tools.
• A strong propensity for teamwork, excellent communication skills, presentation, and negotiation skills.
• Preferably fluent with Mandarin speaking to communicate with our various stakeholders.
• Good skills in communication and comfortable in working with the cross functional team.

Preferred Skills:

• Experience in the renewable energy sector or related industries.
• Knowledge of energy storage systems and their applications in various markets.
• Familiarity with industry standards and regulations related to battery products.

Perks of joining us:

• Competitive Salary Package.
• Vibrant Environment & Company Culture.
• Dental, Medical & Hospitalization Insurance.
• Performance-based Variable Bonus.
• Comprehensive Leave Package.
• Convince us with your skills & strengths and we promise you progressive personal & career development opportunities with our leading-edge technologies and industry know-how.

About us:

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT solution is proven to be one of the safest, most durable and environmentally friendly battery technologies.

VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU. VFT founders and management team have deep experience in the renewable space, and Vanadium redox flow technology.

VFT is passionate about powering tomorrow’s energy demands in a sustainable way. To achieve this, we believe in attracting great talent through the creation of a vibrant, progressive workplace that makes them our greatest assets. We’re always on the lookout for experienced and passionate individuals to be part of the team, working and collaborating effectively to make a positive difference.

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

• Report to Precast yard Manager
• Responsible for All Precast segments casting work
• Responsible Precast Mould Assembly
• Profiling of Precast Segment Rebar and Post Tensioning Duct
• Preparation of Pre and Post Tensioning Calculation
• Ensure the quality of work as per the approved standard
• Assure that work is done according to safety work practices
• Post Tensioning Duct Layout and Profile works
• Coordinate with site Engineer and supervisor
• Assist with Senior Engineer and attend internal meetings

Job Requirements:

• Degree in Civil Engineering or equivalent
• At least 2 years of experience in civil engineering projects, inclusive of relevant experience in precast yard or fabrication yard
• Experienced in the fabrication of segmental box girder for viaduct, precast mould assembly & repair, and/or similar projects is preferred
• Knowledgeable on the applicable standards for the casting works
• Location :Woodlands
• Project : Viaducts

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Location: Woodlands

Salary: $4000-$5000

US MNC

Have AWS & Bonus

Job Description

• Offer technical support and expertise advice to customers (both internal and external) on product selection, solutions and other applications knowledge.
• Do regular site visits as part of field learning experiences and also to help troubleshoot issues as necessary.
• Work with sales team to provide customers with product demonstrations and company presentations, technical solution and products offer.
• Work with global application team to maintain close coordination and cooperation, access to product related information and seek for technical support when necessary.
• Participate actively in knowledge exchange through global forums and case studies.
• Conduct necessary technical training to customers, distribution partners and internal team
• To support the sales team in spec-in activities with the best solution, as well as reviewing project technical/testing specifications
• Work with QC team on product defects/issues/technical aspects
• Other ad hoc duties assigned by the supervisor.

Professional Qualifications

• Bachelor’s degree/Diploma in Mechanical/Manufacturing and Engineering is preferred.
• Mechanical design engineer welcome to apply!

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Mandatory Skills

This role focuses on creating and maintaining robust CI/CD pipelines, ensuring system reliability, scalability, and performance. It involves providing technical assistance and support to users, resolving issues quickly and effectively, and ensuring a positive user experience. Key responsibilities include automation, troubleshooting problems, and delivering solutions to enhance overall system functionality.

Responsibilities:

• Monitor, analyze, and resolve issues and defects in production.
• Participate in pre-production and production deployment activities in the PCF environment.
• Able to write scripts and automate processes.
• Able to write SQL queries and monitor database performance.
• Take initiative in following up with various teams until the product is shipped to production.
• Self-organize and manage priorities while delivering work in Scrum Teams.

Requirements:

• 8+ years of experience in developing and supporting enterprise applications.
• Experience in supporting enterprise applications using Java, Spring Boot, Angular, and cloud technologies.
• Proficiency in CI/CD tools such as Bitbucket, Jenkins, JFrog, JIRA, and Confluence.
• Knowledge of Python and shell scripting.
• Familiarity with relational databases like MariaDB and MySQL.
• Knowledge of Elasticsearch and Grafana.
• Ability to manage business and provide timely updates on issues and resolutions.
• Capacity to handle capacity management and provide suggestions on capacity requirements.
• Responsibility for application stability.
• Fluency in written and spoken English, with good communication and interpersonal skills.
• Adherence to policies in accessing different production systems.
• Compliance with policies in production deployments.