Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Sales Engineer

Working Day: Monday – Friday (8.30am – 5.30pm)

Working Location: Woodlands

Salary: $2300 - $3,000 + Mobile Claim + Transport Allowance (Cab-charge Card)

Requirements:

• Possessed Diploma in Engineering or any equivalent qualification
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Willingness to travel oversea as required
• Training Provided

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities

1.Regulatory and Compliance Leadership:

· Serve as the primary point of contact for all regulatory and compliance matters related to Offshore Wind and Offshore Substation projects

· Develop and maintain a comprehensive understanding of international and local regulations, including environmental, local regulation such as BOEM, safety, and maritime regulations.

· Stay abreast of regulatory requirements, flag requirements, and industry best practices, developing and updating regulatory compliance plans,policies, and procedures.

2. Regulatory Review and Documentation:

· Conduct regulatory reviews of offshore substation designs and documentation to ensure compliance with relevant standards and regulations.

· Prepare and submit regulatory compliance documents, assist and collaborate with developer and/or client to provide input for permit applications, safety cases, and environmental impact assessments where require.

· Review and analyze reports from third-party consultants, providing critical feedback and recommendations.

3. Team Management and Development:

· Lead and mentor a team responsible for regulatory compliance and technical safety, setting objectives, monitoring performance, and providing career development guidance.

· Direct the team's progress in delivering regulatory requirements, plans,and reports, ensuring these are integrated into the design at an early stage.

· Manage the transformation of contractual specifications into cost-effective engineering solutions, following relevant codes, standards, and classification requirements.

4. Project Coordination and Support:

· Collaborate with other engineering disciplines (e.g., E&I, Piping,Mechanical) on problem areas related to regulatory compliance and technical safety.

· Provide regulatory compliance to commercial marketing, bidding, and procurement activities during pre-contract and contract development phases of Offshore wind and substation projects.

· Manage team coordination on design changes, ensuring follow-up on regulatory updates.

5. Interface and Liaison:

· Liaise with regulatory bodies, classification societies, third parties andother relevant authorities to obtain necessary approvals and certifications.

· Manage relationships with external consultants, regulatory specialists, and internal departments to ensure a holistic approach to compliance.

6. Strategy and Program Development:

· Develop and implement compliance strategies and programs to meet regulatory requirements and industry best practices.

· Initiate the development of compliance matrices to maximize team performance, accuracy, and design compliance.

· Contribute to the development of company policies and procedures related to regulatory compliance.

7. Risk Management and Auditing:

· Conduct internal audits to assess compliance with regulatory requirements and company policies specific to offshore wind and substation projects.

· Manage the development and maintenance of a recommendation register, ensuring that feedback from safety studies is integrated into project designs.

8. Reporting and Communication:

· Prepare regular reports on compliance status and regulatory risks for Project Engineering Manager.

· Review team reports for accuracy and liaise with customers, statutory, and classification authorities on design and compliance issues affecting production start-up.

9. Training and Development:

· Develop and deliver training programs to ensure staff awareness of regulatory requirements and compliance procedures.

· Provide career development guidance and routine administrative responsibilities, such as leave and course approvals.

Requirements

· Bachelor’s degree in electrical engineering, Marine Engineering, Environmental Science, or related field, an advanced degree is preferred.

· Minimum of 5-7 years of experience in regulatory affairs and compliance within the offshore industry.

· In-depth knowledge of international and local regulations applicable to offshore wind engineering and substation design.

· Strong understanding of risk assessment and management principles.

· Experience in preparing and submitting regulatory compliance documents and permit applications.

· Familiarity with technical aspects of offshore wind and Offshore substations, including high voltage systems, grid connection requirements, and marine engineering considerations.

· Proven experience in leading teams, mentoring, and guiding junior engineers.

· Excellent analytical, problem-solving, and communication skills.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

Responsibilities

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

Job Description:

• Analyse the needs of users, design, test and develop the software solutions to meet those needs by utilizing the principals of computer science and information technology.
• To provide flexible solutions to integrated applications, recommend upgrades for existing network, systems and programs, and to ensure any new product integrations are hassle free.
• Analyse product requirements and implementation of feasible solutions to meet these requirements
• Update exsisting software, to enhance software capabilities, develop and take charge of software testing and validation procedures while ensuring the continued functionality of a program during maintenance and testing phase
• Document each aspect of a system or application as a reference for future upgrades and maintenance
• Revisit the development process to fix bugs or address client or consumer concerns, supporting existing data patches and enhancements.
• Work with the business analysts and users to ensure policy premiums are calculated as required.
• Work with computer engineers to integrate anyhardware and software systems to develop specifications and performance requirements.

Requirements:

• Minimum 5 years of experience in software development using Java/VP/MS
• Preferbly with experiences in the healthcare/insurance industry with functional knowledge

Job Summary:

We are seeking a skilled Cloud Operations Engineer with expertise in Azure and AWS to join our delivery team. This project-facing role involves executing daily cloud operations, cloud implementations, and providing technical expertise during customer engagements. The ideal candidate will demonstrate strong technical capabilities, hands-on experience, and excellent project-handling and teamwork skills.

Key Responsibilities:

Cloud Operations and Administration: Perform daily cloud operations, including administration and maintenance, ensuring performance, security, and reliability. Handle configuration tasks to meet high standards of scalability, maintainability, and reusability.

Implementation and Delivery: Lead or participate in specific cloud implementation projects, pilots, and migrations. Codify and deploy configurations following automation-first principles using tools like Ansible, CloudFormation, and Terraform. Document all configurations and deployments effectively.

Cloud Migrations: Participate in cloud migration projects, including migrating over 20 VMs or databases using tools such as CloudEndure and Azure Migrate.

Technical Expertise and Solutions: Provide technical expertise to fellow team members and projects, offering innovative solutions to optimize cloud environments. Resolve technical issues efficiently and ensure adherence to SLAs with proper resolution documentation.

Project Collaboration: Engage with projects in operational meetings, fostering discussions to improve processes and optimize environments. Maintain strong project relationships and ensure delivery excellence.

Knowledge Sharing and Skill Development: Stay updated on market trends, certifications, and competitive insights in cloud technologies. Actively collaborate with the technical community and contribute to knowledge sharing.

Mandatory Skills and Certifications

Cloud Skills: Proficiency in Azure and AWS platforms. Hands-on experience with Azure Kubernetes Service (AKS), API Management (APIM), API Gateway, Network Security Groups (NSG), and Azure Firewall.

Certifications: Azure certifications are highly preferred.

Technical Proficiency: Experience with cloud configuration and deployment using automation tools (e.g., Ansible, CloudFormation, Terraform). Knowledge of cloud migration tools like CloudEndure and Azure Migrate.

Job Description & Requirements

Control and monitor work progress and ensure work quality.

· Responsible for working closely with project team and resolving technical issue

· Responsible for coordination and liaise with contractors, suppliers, and consultants

· Prepare and compile related report

· Attend site meetings

· Any other ad-hoc duties assigned

Requirements:

· Engineering or Civil / Structural Engineering Diploma / Equivalent

· Minimum 3 years’ relevant experience

· Carry out project planning, scheduling, cost control

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer (Full Stack)

Internal Code: A24073

What will you do?

• We are looking for software developers that are open and enthusiastic about end to end software delivery and trying out new technologies.
• Be part of a cross-functional development team that values quality, automation and user experience of the software we deliver.
• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers to deliver features

What are we looking for?

• Experience in modern web applications development using NextJS, TypeScript and Kotlin/Java
• Experience in development of CI/CD pipeline and applications deployment using cloud services such as AWS
• Experience in database migration will be an added advantage
• Working experience in an Agile/SCRUM setup will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is a plus

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

The Role

• Supervise C&S works to ensure compliance with contract documents and acceptable standard of workmanship
• Ensure the building works are constructed to the required quality, accuracy and full compliance in accordance with the Building Control Act and Regulations and approved drawings and specifications
• Check & approve structural shop drawings
• Check & approve method statements submitted within specified time frame
• Manage RFI involving C&S & liaise with Design & Drafting office.
• Resolve site problems of a technical nature in a timely manner.
• Attend, facilitate & follow-up on structural audits conducted by client & Authorities
• Manage structural materials test, arrange and supervise acceptance tests on site
• Check & monitor that works are carried out in a safe and proper manner.
• Ensure proper documentation and records of all C&S works, including records of test, defect rectification, inspections, work progress, material testing and safety inspections

As an ideal candidate, you will have

• Bachelor’s Degree in Civil and Structural Engineering or its equivalent
• Knowledge of all the Codes of Practice and regulations related to building services is essential
• At least 2-5 years of relevant experience
• Resident Engineer Accreditation Certification

Job Description (Key Responsibilities):

• To ensure an efficient Civil & Structural and Geotechnical & Tunnel design is achieved in accordance with Design Criteria and relevant standards
• To liaise with internal and external parties on all Civil & Structural and Geotechnical & Tunnel design matters and advises the NSC’s PRPM/SPM/PM regularly
• To liaise with internal and external parties on all Civil & Structural and Geotechnical design matters and advises the NSC’s PRPM/SPM/PM regularly
• To co-ordinate the review of Contractor’s Civil & Structural and Geotechnical & Tunnel submissions and assists the NSC’s SPM/PM in conveying a timely response to the Contractor
• To co-ordinate the review of Contractor’s Civil & Structural and Geotechnical submissions and assists the NSC’s SPM/PM in conveying a timely response to the Contractor
• To identify and resolve potential design related issues during construction phase
• To carry out any other duties as required by the Authority’s Project Management Team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical support as required in the evaluations of Contractor’s claims
• To ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Job Requirements & Person Specification (Qualifications, Experience, Skills & Behaviours)

• Degree in Civil & Structural (C&S) Engineering / Construction Management (Preferable from government university in Malaysia for Malaysia candidate)
• Relevant experience in a C&S, geotechnical, tunnel, or viaduct project / construction environment
• Proficiency in relevant software programmes for planning and project work is advantageous
• Experience with C&S, geotechnical, tunnel, or viaduct design would be an advantage
• Strong analytical and communication skills
• Any offer of employment for the role of Project Engineer is also subject to approval from our client for you to commence work on their project

About Asia Infrastructure Solutions:

Asia Infrastructure Solutions is a leader in delivering project & programme management, cost management, sustainable design, engineering, business advisory and consultancy solutions for the infrastructure, buildings, and environmental sectors. The company was established by Global Infrastructure Solutions Inc. (GISI), the largest privately owned construction manager in the commercial building, industrial and healthcare markets, and a leading project / construction manager in the environmental and public infrastructure sectors. GISI and its founding members have over 90 years of project experience in Asia and currently employs 12,500 employees globally, operating in more than 90 countries.

Asia Infrastructure Solutions has a strong and diversified team of project managers, construction managers, programme managers, cost managers, sustainability consultants and various disciplines of engineering professionals with a long track record in the infrastructure, building and environmental sectors delivering the future for the built and natural environment. Our professional and technical expertise and capabilities are inherited from the Arcadis Design & Engineering / Hyder / Freeman Fox in Hong Kong and Arcadis Consulting / EC Harris / Davis Langdon & Seah businesses in Singapore which span many decades in the Asia region.

Notable projects in Singapore include the Jewel at Changi, CapitaSpring, the North-South Corridor, various hotels, data centers and corporate headquarters for the world’s leading MNCs to name a few.

We empower our employees to succeed and we invest in their professional growth through learning & development programmes as well as membership of professional bodies. Our employees also receive a range of benefits that includes opportunities for hybrid/flexible working, a share-ownership scheme, and private healthcare coverage.

Asia Infrastructure Solutions . Delivering the Future . AsiaInfraSolutions.com

Fair recruitment practices:

Asia Infrastructure Solutions adheres to the Tripartite Standards for Recruitment Practices in Singapore and uses fair, merit-based, and inclusive hiring practices.

Employment agencies:

Candidates referred by employment agencies will not be considered unless the agency has been explicitly instructed to provide candidates for the stated role.

Job Description (Key Responsibilities):

• Responsible for the technical performance of projects assigned
• Assist the team leader to maintain and develop the Company’s client base by winning clients’ satisfaction and trust during the performance of assigned projects
• Assist in preparation of proposals for potential projects
• Assist the team leader and work closely with members within the Function Group in relation to the following activities:

1. Project programming, implementation, review, monitoring and management
2. Preparation of disciplinary system designs and reports

• Demonstrate leadership and enthusiasm to staff within the team and motivate those staff to achieve the performance expected of the Function Group
• Assist Function Group Leader, Principal Engineer and Senior Engineer, working closely with the regional management team and Sector Director, to broaden and strengthen AIS’ reputation
• Carry out duties and functions as directed by the Function Group Leader not specified above

Specific

• Work closely with Project Manager to prepare action plans, including resources, timeframes and budget for the project
• Coordinate with the client, sub-consultant and design team to:

1. Attend meetings
2. Assist in liaison with QP(D) and QP(S)
3. Assist in liaison with various government authorities
4. Assist in liaison with the Public Utilities Board & Superintendent Officer

• Perform various coordinating tasks like schedule, risk managements along with administrative duties like maintaining project documentation, report writing and handling project queries
• Ensure that client’s needs are met as the project evolves
• Undertake some minor hydraulic designs
• Support the business development and pursuits in the Water and Infrastructure projects
• Assists in other ad hoc duties as assigned

Job Requirements & Person Specification (Qualifications, Experience, Skills & Behaviours)

Resident Engineer

• Minimum 2 years of working experience
• Experience working in the construction industry / HDB BTO projects
• An engineering degree in the appropriate discipline
• An ability to prepare and interpret flowcharts, schedules and step by step action plans
• Professional and confident approach to working relationships. Team orientated with the ability to build strong working relationships with colleagues and peers
• Self-motivated and able to work independently when required.
• Strong communication, interpersonal, supervisory and client management skills
• Solid organisation skills including multitasking and time-management
• Demonstrated good presentation and reporting skills

About Asia Infrastructure Solutions:

Asia Infrastructure Solutions is a leader in delivering project & programme management, cost management, sustainable design, engineering, business advisory and consultancy solutions for the infrastructure, buildings, and environmental sectors. The company was established by Global Infrastructure Solutions Inc. (GISI), the largest privately owned construction manager in the commercial building, industrial and healthcare markets, and a leading project / construction manager in the environmental and public infrastructure sectors. GISI and its founding members have over 90 years of project experience in Asia and currently employs 12,500 employees globally, operating in more than 90 countries.

Asia Infrastructure Solutions has a strong and diversified team of project managers, construction managers, programme managers, cost managers, sustainability consultants and various disciplines of engineering professionals with a long track record in the infrastructure, building and environmental sectors delivering the future for the built and natural environment. Our professional and technical expertise and capabilities are inherited from the Arcadis Design & Engineering / Hyder / Freeman Fox in Hong Kong and Arcadis Consulting / EC Harris / Davis Langdon & Seah businesses in Singapore which span many decades in the Asia region.

Notable projects in Singapore include the Jewel at Changi, CapitaSpring, the North-South Corridor, various hotels, data centers and corporate headquarters for the world’s leading MNCs to name a few.

We empower our employees to succeed and we invest in their professional growth through learning & development programmes as well as membership of professional bodies. Our employees also receive a range of benefits that includes opportunities for hybrid/flexible working, a share-ownership scheme, and private healthcare coverage.

Asia Infrastructure Solutions . Delivering the Future . AsiaInfraSolutions.com

Fair recruitment practices:

Asia Infrastructure Solutions adheres to the Tripartite Standards for Recruitment Practices in Singapore and uses fair, merit-based, and inclusive hiring practices.

Employment agencies:

Candidates referred by employment agencies will not be considered unless the agency has been explicitly instructed to provide candidates for the stated role.

The Network Services Operations position is a key role within the Command Center organisation to support the ever growing Network, Wireless, Security and Unified Communications products and services provided globally.
Within the Command Center organization this position is the Subject Matter Expert for the Network Services and Unified Communications. The role of the Command Center is to be the provider of end-to-end support to our customer base worldwide, thus the high level of expertise required to ensure the Command Center is fully self sufficient.
The primary focus is to ensure timely resolution of incidents brought to Level 2/ Level 3 and apply approved changes where applicable. You’re expected to provide knowledge sharing and transfer to the rest of the team.

Roles and responsibilities:
• Provide Customers with professional, timely and effective technical expertise on Network (LAN/WAN), Wireless and Security services support.
• Support or Provision Customer LAN/WAN/Security/Wireless changes on time and help to improve the process to “do it right the first time”
• Provide LAN/WAN/Wireless service support by owning customers LAN/WAN/Wireless incident within a complex topology (manage LAN, WAN, Wireless, IP Network routing or quality issues…) and developing a methodical approach to solve the incident or problem and escalate problem to supplier or internal Expert Practices when appropriate. Capable of analysing problems and resolving recurring difficulties through root cause analysis.
• Implementing LAN/WAN/Wireless/Security change requests for customers on the managed LAN/WAN/Wireless/Security solution (Cisco Router, Cisco Switch,Wireless (Aruba/MIST), Cisco UC, Fortinet, Palo Alto, Juniper etc.).
• Maintain a comprehensive and update-to-date customer LAN/WAN/Wireless/Security topology database
• Operate customer WAN optimization and application compression environment base on product family from Juniper and RiverBed.
• Operate customer IPSec services based on product family from Cisco, Juniper, Fortinet, Palo Alto etc.
• Expert knowledge of Firewall Management (Cisco ASA, Fortinet, WMWare NSX, Palo Alto)
• Actively contribute to improve and map LAN/WAN/Security/Wireless/UC processes within ITIL framework
• Contribute to the achievement of customer satisfaction by proving best in class support
• Understand complex LAN/WAN/Wireless/VoIP integration with WAN, LAN, Wireless, Managed Firewall and Unified Communications

Qualifications:

• Diploma/Degree in Computer Science, Data Communications, Engineering (or equivalent)
• Experience in an operational role with industry Technical Certifications are required: Cisco, Fortinet, Juniper Palo Alto etc
• Good knowledge on one or more of the following areas:

o LAN/WAN/Wifi (Cisco Nexus, Juniper EX, Aruba, Huawei etc)
o Protocols (BGP, OSPF, EIGRP, MPLS, Multicast, QoS, SIP, VoIP etc)
o Security Management (Cisco, Juniper, Fortinet, Palo Alto, VMWare NSX etc)
o Unified Communication (Cisco UC Manager, Cisco Voice Gateways, Microsoft Lync, PureCloud, Call Accounting, Contact Center etc)
o Tools and Automation for LAN/WAN/Wifi/Firewall etc
o Application compression, optimization and load balancer (Riverbed, F5 BigIP, Netscaler etc)
o Virtualization (VMWare) and Cloud Operations (IaaS, DaaS, SaaS etc)
• Experience in project delivery

For more information, please visit to www.gmprecruit.com and search for Job Reference: 21519

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | Tang Lee Ling | Registration No: R1106845

Based in Singapore and working within the product team, this role will be focusing on technological implementations for the region. This role is based in Singapore but will oversee the region to ensure consistency in strategic technological rollouts through the region. Interested candidates should be genuinely interested in media technologies and passionate to drive changes in the media industry.

Role-Based Objectives

• Build and maintain enterprise systems.
• Innovate and experiment to improve systems for seamless user experiences.
• Continual learning and experimentation in product innovation.
• Build and maintain enterprise API web services.
• Create an integration layer for cross-platform and software products.
• Manage data stack.
• Continual learning and experimentation in product innovation.

Technical Requirements

• Well verse with a type-safe programming languages: e.g. Java, C#
• Knowledge in managing and setting up polyglot persistence (Structured/Unstructured) databases: e.g. MS SQL, MySQL, Firebase
• Frameworks: e.g. .NET/.NET Core, Java Web Services
• Consumption of web services for frontend development work.
• Understanding and being able to apply Design Thinking, Journey Mapping Frameworks.
• Candidates with AWS Cloud Serverless deployment experience is a plus
• Candidates with knowledge on finance account systems is a plus

Job Responsibilities

• Candidate will be assigned to an in-house product development portfolio.
• Define, design, implementation and integration of systems according to requirements
• Carrying out of innovation, development, prototyping tasks;
• Designing seamless user journey's through understanding existing business process
• Participate in Business Process Re-engineering, Automation and Workflow Optimization

Job Requirements

• Bachelor/Master’s degree in Software Engineering, Information Systems/Science, or equivalent. (Candidates without a related degree/Bachelor can submit their experiences and GitHub for references)
• Portfolio and experience with User Experience Design & Development.
• Understanding of User Interface Guidelines, Declarative UI workflow for prototyping.
• On-site job shadows with ground operational experiences for collaboration are required.
  (Note: This is not a remote position due to business nature.)

Who do we look out for

• An individual who has a well throughout Critical thinking process and problem-solving skills
• An individual who is adaptable to a fast-paced working environment and changing requirements
• An individual who has strong empathy towards colleagues and a team player
• An individual who is innovative and can think out of the box to find practical solutions
• An individual who is feels comfortable stepping into uncomfortable situations and thrive in them
• An individual with good time management skills

To Apply

#HiringAssignment

1. Create a webservice that crawls https://www.reddit.com/r/memes/ and returns top 20 voted posts for the past 24 hours. Sorted by top voted post first, descending order.

2. Stores the crawled data into a database for historical tracking and future data visualization.

3. Present and generate a report file for past 24 hrs top 20 trending memes that can be sent as a file via a Telegram Chatbot.

4. Create a presentation deck to showcase live demo and explain both frontend and backend designs.

5. Suggest 3 alternative use cases or actionable insights from the generated report.

Level Marking Scheme:

Level 1: Demonstrates ability to do data mining and converts the mining function into an API.

Level 2: Demonstrates ability to create well structured database for crawled data.

Level 3: Clear documentation, structure, design at code and service design for data visualisation.

Level 4: Able to provide explain mining methodologies and frameworks used.

Level 5: Abe to showcase actionable insights after generating the report.

Please indicate whether you used AI in completing the assignment or not. If you used AI, provide the prompts you used. If you did not use AI, describe the HI (human intelligence) thought process in steps taken to solve the assignment.

Candidates who did not complete the hiring assignment will not be considered.

Send in your completed #HiringAssignment, CV/resume & existing portfolio to [email protected]

Submit your CV/resume & existing portfolio (Quick HR)

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client delivers a broad array of solutions and services, featuring IBMS, Smart Facility Management, IoT and Data Analytics, ELV Systems, as well as Network Infrastructure and ICT solutions.

• Perform testing of DCS/DDC/PLC with SCADA software.
• Conduct the communication test for Devices using different protocol.
• Arrange and submit documents and report as per the requirement.
• Ensure timely completion of commissioning activities.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of experience in Industrial/Process automation, building ACMV systems for Built Environment Projects.
• Experience in building management systems will be advantageous.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected].

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description: We are seeking a skilled and motivated Network & Security Engineer to join our dynamic team. As a Network & Security Engineer, you will play a critical role in designing, implementing, and maintaining robust network & security infrastructures for our diverse range of clients. You will work collaboratively with other IT professionals to integrate various technologies, ensuring the stability, integrity, and efficient operation of our clients' network & security infrastructure.

Key Responsibilities:

• Design and deploy functional networks (LAN, WAN, WLAN, VLAN) & security (FW, NAC) solutions tailored to client needs
• Configure and install routers, switches, wireless controllers, firewalls and other network devices
• Monitor network performance and integrity, ensuring high availability and reliability
• Troubleshoot and resolve network issues escalated by support teams
• Communicate with clients to understand their requirements and provide technical support
• Maintain comprehensive technical documentation
• Propose and implement improvements to network performance, security, capacity, and scalability
• Participate in project deployments, ensuring seamless integration and implementation of network & security solutions

Requirements:

• 3 to 5 years of experience in the networking field, preferably with a systems integrator
• Hands-on experience with wired and wireless networking deployment
• Aruba Wired or Wireless certification is a must
• Well-versed with the different types of network routing and switching technology.
• Knowledge of wireless technology and products.
• Proven experience as a Network Engineer or in a similar role
• In-depth knowledge of best practices in network management, control, security, and monitoring
• Good experience with firewalls, VPNs, remote implementations, and troubleshooting
• The ability to set up and configure server hardware will be an added advantage
• Excellent organizational, prioritization, and multitasking skills

Contract Type: 12 Months (Renewal)
Salary: SGD4,000 to SGD5,000
Location: MacPherson
Working Hours: Mon – Fri 9 am to 6 pm (onsite)
Commencement: Immediate

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

MORE INFORMATION:

• Company: Well-reputable Government-Linked IT Organization; located in CBD (Orchard Zone) Area
• Working Hours: Monday – Friday (8 AM – 5.30 PM)
• [Required to provide stand-by support (i.e.: after office hours, and on weekends and PH), usually on rotating basis]
• Benefits (on top of basic monthly salary): Location Allowance (up to S$ 120/month)

+ Variable Annual Performance Bonus

+ Other Attractive Employee Benefits (i.e.: 14 Days of Annual Leaves, Medical & Insurance Benefits, etc.)

RESPONSIBILITIES:

• Managing IT Infrastructure including virtual machines, clusters and storages (i.e.: VMware, Hyper-V, etc.)
• Responding to and investigating the escalations, incidents, and service requests (according to SLA) and gathering of logs and detailed information (in cases requiring to escalate to L3 or higher)
• Deploying, monitoring, configuring, troubleshooting, managing, and technical documentation of IT Network Infrastructure, COTS Infrastructure (Commercial off-the-shelf), SCOL (System Centre Operations Manager), and SCCM (System Centre Configuration Manager) for seamless software deployments and updates
• Managing and maintaining Microsoft Active Directory services [i.e.: GPO (Group Policies), User Accounts, Domain Controllers, etc.]
• Documenting and providing those operational documentations (i.e.: SOPs, guidance, training and technical related) to internal & external stakeholders, on routine basis
• Overseeing the management & maintenance of NetApp storage systems (i.e.: provisioning, data backup, and disaster recovery processes)
• Other relevant duties as assigned.

[Might be required to travel to different sites/ other offices, in case of service requirements]

REQUIREMENTS:

• Required to have Diploma (or Higher) in IT, Computer, Electronics, Communication, or relevance
• Required to have minimum 3 – 4 years of relevant working experiences as an IT Infrastructure Engineer (providing L1 – L2 support, or higher) with proficiency in SCCM, Active Directory, SCOM, VMWare, NetApp, etc.
• Excellent communication, interpersonal, time management, and stakeholder management skills
• Experienced with Scripting/ Coding languages (e.g.: Bash, PowerShell, Windows Patch, etc.)
• Knowledgeable in Networking principles, protocols and security concepts
• Advantageous to have, but not a must have:

1. Familiar with ITIL best practices and IT Service Management
2. Certifications such as VMware, NetApp, Microsoft MCSE, ITIL, etc.

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our internal resume database for future opportunities.

APBA TG Human Resource Pte Ltd (14C7275) || Yadanar Su Mon (R1549384)