Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Basic Salary: $4,500 to $5,500 Basic + 2 months Variable Bonus

• Possess X-Ray (XRD/XRF) product experience

• Europe MNC

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor & pharmaceutical industry.

Responsibilities

• Responsible for commissioning, installation, maintenance & repair of current installed base of XRD & XRF for APAC.
• Provide Service Support & Basic Training after installation

Requirement:

• Diploma/ Degree in Engineering
• Possess experience in X-Ray (XRD/ XRF) product.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

• Conducting maintenance service, commissioning of alarm systems
• Address to customer request on alarm and card access systems

Requirements:

• Basic Security certified
• At least 2 years of working experience
• Possess valid class 3 driving license

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Requirements:

• Bachelor’s Degree in Electronics or Electrical Engineering.
• 2-6 years of relevant experience in characterizing mixed-signal IPs and RF components.
• Strong understanding of RF and Mixed Signal test concepts and measurements.
• Proficiency in embedded programming (C/C++), LabVIEW, and FPGA development.
• Experience with statistical analysis tools such as JMP, CEDA, or Optimal Plus.
• Hands-on expertise with scripting languages like Perl, Python, or VBA.
• Solid data analysis skills and familiarity with data mining techniques.
• Strong verbal and written communication skills.
• Ability to work independently and manage multiple tasks effectively.

Key Responsibilities:

• Installation, corrective maintenance, and fault finding of all equipment and systems carried out by the company.
• Attending to service calls, developing sales of security systems and equipment, quoting, and securing projects.
• Coordinating and assisting with projects secured by the company.
• Performing any other work assigned by the management consistent with the company's objectives.
• Maintain effective communication with client (local and overseas) in order to track and report the project status.
• Working in a heavy industries environment that is dirty and greasy can be a physically demanding such as Manual Labor e.g. Lifting heavy materials, working with tools, or operating machinery requires strength and stamina.
• You will be working in Confined Spaces and may need to navigate tight spaces, such as inside machinery or construction areas.
• You are require to stand the exposure to harsh Conditions which deal with extreme temperatures, grease, oil, dust, or other environmental factors that make the job physically taxing.
• You are able Climbing, Bending, or Crawling as this roles require physically demanding positions as part of the daily responsibilities.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

Product Engineer (Vision Department)
5 days
9am-6pm
Kallang
$4000-$5000

Responsibilities:

• Assist in component selection, engineering evaluation and testing of parts and sub-modules for vision inspection equipment
• Design of electrical parts and sub-modules for vision inspection equipment
• Maintain product design documents, drawing and BOM
• Works and manage suppliers to ensure all design requirements are met
• Provide troubleshooting expertise
• Planning/Coordination of releasing new designs to manufacturing

Requirements:

• Diploma/Degree in Engineering specializing in electrical/electronics
• familiar with CAD software for electrical and schematic design
• Familiar with PC hardware, Windows OS and Software
• Familiar with PCB/PCBA design/fabricate/test process is an added advantage
• Analytical with good troubleshooting skills

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Responsibilities:

• Contribute to all phases of the software development life cycle, focusing on delivering innovative solutions.
• Collaborate with global teams and work independently on architecture, design, development, testing, and support.
• Interact with stakeholders to gather and document requirements, define user stories, and provide effort estimates.
• Build and integrate software products, test interfaces, and manage version control.
• Evaluate and recommend technologies to align with product and platform goals.
• Adhere to best practices in design and development and participate in code reviews.
• Break down features into development tasks, prioritize workloads, and address ad-hoc requests.

Qualifications:

• Bachelor’s degree in Computer Science or related field with 8+ years of software development experience.
• Strong knowledge of Data Structures, Algorithms, and Design Patterns.
• 3+ years of full-stack development experience with Java, Spring, JPA/Hibernate, and microservices.
• 6+ years of experience with test automation tools like Karate and Cypress.
• Familiarity with secure coding practices, including NexusIQ, SonarQube, DAST, and penetration testing.
• Experience with databases (Postgres, Oracle, Redis), cloud platforms (AWS, Azure, GCP), and container technologies (Docker).
• Nice to have: 2+ years of experience with JavaScript, ReactJS, and HTML5/CSS3.

EA License: R1873481

Company EA License: 11C4879

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

We provide Products & Services to the Oil & Gas, Petrol-Chemical, Chemical, Power & Utilities Industries. We are looking to fill up the position of 'Sales & Service Engineer'.

Job Responsibilities:

A. Sales Functions:

• To visit and provide Sales support to all after-market customers in Singapore territories, and West Malaysia if required

B. Service Functions:

• Commissioning of equipment, co-ordinations of installations of equipment, troubleshooting and technical support to customers and in-house executions.
• To write technical reports after service jobs are completed.

Job Requirements:

• Degree / Diploma in Engineering/ Technical Subjects, are preferred or equivalent.
• Salary will be commensurate based on experience and qualification
• Candidates with Sales Experience will be an advantage. Those without Sales Experience and with a good Sales attitude are to be considered.
• Candidates with Project Coordination Skills will be an advantage.
• Applicant MUST hold a valid Class 3 driving license
• Salary Package consisting of Monthly Salary & Sales Commission.
• Candidates who seek to be Professional Sales Engineers, willing to work hard and honest, will be the most suitable person to fill in this position.
• We do not provide Work Pass
• Junior and Senior position levels are available

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Purpose of Job / Job Summary

• Coordinate day to day site activities with Tunnel Engineers & crew, while supporting Deputy & Tunnel Manager in planning and execution of tunneling activities.

Key Responsibilities/Duties .

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Provide guidance to Tunnel Engineers & supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Shall be required to work in Night Shift during Tunnelling

Qualifications:

Minimum degree in Civil or Mechanical Engineering

Experience:

Minimum 8 years of engineering experience in the relevant field, and at least 5 years of experience in managing tunneling works of similar scale, complexity and nature of work.

Specific skills/abilities:

Microsoft Office fluent, CAD fluent, team player, compressed air fit

Personal qualities:

Active, driven, problem solver

Role Responsibilities

• Review of EPC engineering submissions for compliance with specifications, standards and contractual requirements.
• Participate in workshops, engineering reviews, other safety and quality activities including and not limited to HAZOP, DfS, 3D reviews and other meetings.
• As part of the site team representing the Owner, to inspect and witness the quality of installation and testing of the equipment per the contract.
• Attend local or overseas Factory Acceptance Test (FAT) as witness either on behalf of Owner or in concurrence with Owner per contract requirement.
• Coordinate with other disciplines to assure the quality of the Electrical deliverables in conjunction with other works such as the civil structure requirements, mechanical systems and overall project deliverables.
• Coordinate with other disciplines to ensure the timely delivery of the project where the electrical works may affect the schedule.
• Work as part of the site team to ensure the seamless coordination with Owner (including existing operations team) to deliver works requiring permits and access to existing sites.
• Conduct Electrical services site survey
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Senior engineers must be able to lead projects and supervise a team of engineers / technicians.

Experience / Skills

• Degree in Electrical Engineering
• Minimum 5 - 8 years of hands-on design and commissioning experience in Energy/Infrastructure/Building projects
• Familiar with local code and authority submission procedure.
• Preferably with experience in tender document preparation, bids evaluation and due diligence studies
• Team player and able to work independent with minimal supervision

• Coordinate with EMMP Specialist Consultant, Nparks, PUB and other relevant Authorities
• Oversee site activities to ensure compliance with environmental regulations and standards
• Prepare technical reports and documentation based on monitoring data
• Prepare EIA Report for Reclamation Project
• Liasing with client, consultant and subcontractor

Requirements:

• Degree or Diploma holder in Civil Engineering
• Prefarable 3 years experience in Marine / Land Civil Project in Singapore

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

JOB DESCRIPTION
Department: Facility Engineering
Report to: Facility Executive
Functional Relationships with:
Machine Engineering, Manufacturing Engineering and Production

POSITION PROFILE:
Based in: Singapore
Job site: Yishun
The successful candidate will explore the knowledge of Facility equipment maintenance, energy saving, and EHS-related activities.

KEY DUTIES & RESPONSIBILITIES:
• Overhaul, preventive maintenance, corrective maintenance
• Monitor equipment operating condition and record in the checklist
• Making of DI water & treatment of wastewater including maintenance
• Changing of H2 LPG cylinder and monitor N2 consumption
• Maintenance of RTO solvent pumps & room pressure condition
• Maintenance of Last IC Air-Con, Compressors, Vacuum & Exhaust system
• Maintenance and repair of general breakdowns such as toilet taps, floor tiles, painting, etc.

ABILITY/COMPETENCY REQUIRED:
• Diploma in Engineering field (Electrical/Electronic/Mechatronic/Electromechanical) or equivalent.
• Able to work 12 hours rotating shift (morning and night)
• At least 1 year of working experience in the related field is preferred for this position

• Fresh graduates are welcome to apply

• Able to work well as a team player while being independent and pro-active

• Communicate, interact well with all concerned parties Employer questions

• Prepare and provide service and spare parts quotations in response to customer inquiries.
• Carry out service tasks, including in-house repairs and on-site commissioning for various gas and water quality analyzers, CEMS, and AQMS.
• Troubleshoot analyzer issues and offer solutions to customers in line with company’s standard procedures and safety guidelines.
• Develop and nurture strong relationships with customers while delivering excellent service support.
• Collaborate with customers to address service-related concerns and provide technical solutions.
• Assist the project team with conducting Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for projects.
• Identify new opportunities for preventive maintenance contracts and other service agreements.
• Provide product training and support to end users and distributors.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Responsibilities:

• Develop new accounts and manage existing customers
• Evaluating sales potential and actively follow up with customers’ requirements
• Identify customers’ needs and offer technical solutions, training & application support
• Plan, forecast and materialize sales target

Requirements:

• Degree/Diploma in Electrical / Electronic Engineering with preferably 2 years’ of sales experience in the electronics industry.
• Preferably with technical background in areas relating to electrical/electronic equipment.
• Prior experience in Renewable Energy and Battery related applications experience will be a plus.
• Proficient in computer hardware and software
• Able to learn and assimilate new technology quickly
• Dynamic, Independent and able to adapt to multi-tasking environment
• Preferably have a car
• Willing to travel

5 days week (9.00 AM - 6.00 PM)

Job Order:625106
Responsibilities:

• Develop targeted marketing plans and initiatives for specific products or product lines to enhance their competitive positioning and market presence.
• Create comprehensive business plans and establish strategic product positioning in the marketplace.
• Conduct market research, monitor competitive activities, and identify customer requirements to inform strategic decisions.
• Develop and implement pricing strategies in collaboration with engineering, manufacturing, and sales teams to introduce new products or enhance existing offerings.
• Prepare pricing quotations, negotiate terms to finalize agreements, and complete necessary documentation for order processing.
• Ensure timely follow-up on accounts receivables to maintain healthy cash flow.
• Deliver compelling presentations on the company's product roadmap and capabilities to customers, while effectively communicating customers' technological needs to internal business units.
• Maintain comprehensive documentation and appropriate account coverage for all assigned customers, including detailed summaries of customer visits and tailored action plans.
• Build and nurture strong customer relationships by identifying current and future service requirements through direct engagement with potential and existing clients.
• Collaborate with internal business units to establish annual sales budgets and ensure alignment with organizational goals.

Requirements:

• Minimum of 2 years of experience as a Sales Engineer within the semiconductor industry.
• Willingness to travel extensively and dedicate extended hours to successfully manage complex sales projects.
• Strong communication and interpersonal skills, with the ability to build lasting relationships.
• Detail-oriented, organized, and resourceful team player with excellent problem-solving skills.
• Self-motivated and capable of working independently with minimal supervision.

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Gabriel
EA Personnel Reg. No.: R22104076
EA Licence No.: 07C5771

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About the Security Assurance Team at ByteDance

The team is missioned to build infrastructures, platforms and technologies, as well as to support cross-functional teams to protect our users, products and infrastructures. In this team, you'll have a unique opportunity to have first-hand exposure to the strategy of the company in key security initiatives, especially in building scalable and secure-by-design systems and solutions. Our challenges are not your regular day-to-day technical problems; you'll be part of a team that's developing new solutions to new challenges of a kind not previously addressed by big tech. It's working fast, at scale, and we're making a difference.

Responsibilities

- Continuously design and conduct penetration testing to determine if infrastructure components, systems and applications meet confidentiality, integrity, authentication, availability, authorisation, and nonrepudiation standards in the staging/production environment.

- Translate requirements into test plan, write and execute test scripts or codes in line with standards and procedures to determine vulnerability to attacks.

- Certify infrastructure components, systems and applications that meet security standards.

- To identify risks and actively take ownership to resolve any potential project issues.

- Conduct technical security reviews for any new products and feature requirements.

- Provide security engineering support to product teams to help identify potential security flaws in the early stages of SDLC.

- Collaborate closely with other parts of the security team and product teams to design defense-in-depth controls that limit attackers' ability and improve our security postures.

- Continuously conduct security research and strive to innovate.

Minimum Qualifications

- Background in Computer Science, Computer Engineering, Information Systems or other STEM disciplines.

- Strong knowledge in some of these various disciplines: web application security, mobile app security, cloud security and thick client security.

- Solid experience in writing and reviewing code in at least one of the following programming languages: JavaScript (Node JS), Go, Python, Java, C++, Rust.

- Good project management skills and focused teamwork.

Preferred Requirements

- CTF players, live competitions and hacking events experience.

- CVEs (excluding vulnerabilities such as XSS, CSRF in random CMS) are preferred.

- BugBounty experience with reputable statistics in HackerOne, BugCrowd etc.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Supervise, execute, and coordinate project activities until project completion.
• Ensure the project is on schedule, within budgeted cost and quality standards.

Requirements:

• Diploma in Electrical or Electronics Engineering
• At least 2 years’ experience in alarm, card access and CCTV system installation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.